N0010417RK035_SPI_DWEY.pdf

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

MUNITION NOTICES

NOTES

1. PLACE THE ITEM IN WRAP, REF.-2 THEN PLACE INSIDE BAG, REF.-3 AND SEAL.

2. PLACE UP TO 120 EACH INSIDE SHIPPING CONTAINER, REF.-1.

3. USE CUSHIONING, REF.-5 TO ENSURE A SNUG FIT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

REFER TO MIL-STD-129 FOR MARKING

REQUIREMENTS OF PALLETIZED UNIT

LOADS OF AMMUNITION.

DEPARTMENT OF THE NAVY

NAVAL ORDNANCE SAFETY AND SECURITY ACTIVITY

FARRAGUT HALL

3817 STRAUSS AVENUE, SUITE 108

INDIAN HEAD, MD 20640-5151

8020HC

Ser N851-2207/683 23 May 16

From: Commanding Officer, Naval Ordnance Safety and Security Activity To: Commander, Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division (E25GP) Subj: INTERIM HAZARD CLASSIFICATION FOR THE T-6 LASER INITIATED

DETONATOR

Ref: (a) NSWC IHEODTD ltr 8900 Ser E25GP/U00621 of 6 May 16

(b) DOT-SP 15448 (latest version)

(c) DOT-SP 15448 Authorization Letter (current)

(d) TB 700-2 (NAVSEAINST 8020.8C)

(e) NAVSEAINST 9310.1

(f) 49 CFR

1. As requested by reference (a), the following interim hazard classification is assigned:

a. Nomenclature: Detonator, Laser Initiated (70272- 60450E50102 or 54181-2-800090-1) Packaged as follows: Inner Packaging – bag, plastic, static resistant, each containing one detonator; Intermediate Packaging – bag, plastic, heat sealed, each containing one inner packaging;

Outer Packaging - specification 4G fiberboard box lined with cushioning material, each containing not more than 200 intermediate packagings

(1) DOD Hazard Classification: 1.4B

(2) DOT Hazard Classification: 1.4B

(3) DOT Label: Explosive 1.4B

(4) UN Number: 0267

(5) Proper Shipping Name: DETONATORS, NON-ELECTRIC

(6) Net Explosive Weight: 0.00039 lb (0.178 g)

2. This interim hazard classification expires 31 May 2017.

A copy of this letter and references (b) and (c) must accompany each shipment.

3. This classification is assigned in accordance with reference (d) as authorized by reference (b). It is granted for the shipment of explosives and ammunition on behalf of the Department of Defense (DOD). It is not applicable for shipment of materials by private contractors for non-DOD contracts.

Should final hazard classification be needed for this or any other item, consult the requirements of reference (d).

Subj: INTERIM HAZARD CLASSIFICATION FOR THE T-6 LASER INITIATED

DETONATOR

4. Items that contain lithium batteries and are intended for use, storage, or transportation on Navy facilities, submarines, ships, vessels, or aircraft must be reviewed in accordance with reference (e). For additional information regarding this issue, please contact:

Mrs. Julie Simmons Naval Surface Warfare Center, Carderock Division Email: julie.simmons@navy.mil DSN 287-1853 or commercial (301) 227-1853

5. Consult reference (b) for specific exemptions from the hazardous material requirements of reference (f). This classification does not relieve the shipper from complying with any other requirements of reference (f), including, but not limited to, packaging, electromagnetic radiation, and electrostatic requirements. For information regarding these issues, please contact the following persons:

Packaging: Mrs. Kathy Herc Naval PHST Center, Naval Surface Warfare Center Indian Head Division Picatinny Detachment Email: kathy.herc@navy.mil DSN 880-8089 or commercial (973) 724-8089 Hazards of Electromagnetic Radiation to Ordnance (HERO):

Mr. Rick Magrogan Naval Surface Warfare Center, Dahlgren Division Email: richard.magrogan@navy.mil DSN 249-3445 or commercial (540) 653-3445

Electrostatic Discharge (ESD):

Ms. Yolanda Torres Naval Surface Warfare Center, Indian Head Division Email: IHDIVESD@navy.mil DSN 354-4726 or commercial (301) 744-4726

6. For further information or assistance regarding hazard classification, please contact Mr. Ed Walseman (N851) on commercial (301) 744-6021, DSN 354-6021, or email:

ed.walseman@navy.mil.

ED WALSEMAN

By direction

Copy to:

AMSSD-SA/Mr. Elias Cantu

PR Notice: FOR PROCUREMENT: N00104-17-N-B077 - 09/16/2016