N0010414GA300.pdf

DEPARTMENT OF THE NAVY

NAVSUP WEAPON SYSTEMS SUPPORT MECH-MECHANICSBURG

P 0 BOX 2020

MECHANCISBURG, PA 17055-0788

IN REPLY REFER TO:

Serial No. 8422130807 DATE May 12, 2014

Class Justification and Approval No. N00104-14-G-A300

Justification for Oth$r than Full and Open Competition

1. Identification of Agency and Contracting- The NAVSUP WEAPON SYSTEMS SUPPORT proposes to acquire on a noncompetitive basis the class of contracts described in this justification for other than full and open competition.

2. Nature/Description of Action- For the reasons set forth in this Class Justification and Approval, authority is given to utilize other than full and open competition for the commercial repair, modifi'cation or servicing, as appropriate, for the items listed on the attached on a noncompetitive basis.

3. Description of Supplies/Services - NAVSUP WEAPON SYSTEMS SUPPORT'S logistic support program is predicated upon an established turn-around time (TAT) . This TAT cycle begins with the time of removal of the item from the ship or Naval Supply Center and includes the overall time required for shipment, repair, and redelivery into Navy inventory. To the extent that this TAT cycle cannot be maintained, a proportionately greater investment in spares would be required.

The Master Repairables Item List (MRIL) designates the shipping point of retrograde material, either direct to a Designated Overhaul Point (DOP) or collected at a stock point. The MRIL is updated monthly to preclude time loss (for those items having repair requirements) and increased transportation costs.

Demand changes, CASREP requirements, and carcass availability make shipment of repairables an unknown. Therefore, it is essential that the justification and approval and contractual arrangements for repair be made in advance of the actual need for such repair.

The class of contracts proposed (orders under Basic Ordering Agreement) will:

a. Be for commercial repair, modification and servicing as appropriate for items listed on the attached (Major Weapon Systems supported: MK 45 GUN MOUNT, MpS (j!JN '$:iSJ::EM AND MK75 GUN MOUNT)

b. Apply to those components or equipment, which are listed on the attached, or those items, which are later government-approved configurations thereof. All such later configurations that are authorized to be serviced under the Basic Ordering Agreement will be specifically identified in an exhibit to said agreement.

c. Generally provide for teardown, inspection, repair, modification, test, and service necessary to restore the item to serviceable operating condition. The extent of servicing necessary cannot be determined until the equipments are received by the contractor, disassembled and an inspection made. The work to be performed under the Basic Ordering Agreement will relate only to previously produced components or equipmenti it will not include any research and development efforti nor will it include the furnishing of any parts, components, subassemblies or materials not an integral part of the work described herein.

d. Include the acquisition/repair of sole source Government Furnished Material (GFM) (piece parts)) and/or the acquisition/repair/maintenance of sole source Government Furnished Equipment (GFE) (test equipment)) when determined necessary to complete repairs or meet established RTAT cycle.

e. Include the acquisition of Commercial Asset Visibility reporting for repair efforts performed under subject agreement.

4. Identification of Statutory Authority- The authority permitting other than full and open competition is Title 10 USC 2304 (c) (1), as implemented by paragraph 6.302-1 of the Federal Acquisition Regulation.

5. Demonstration of Contractor's Unique Qualifications- The proposeq class of contracts will be acquired on a sole source basis with BAE SYSTEMS LAND & ARMAMENTS INC. (064S4).

The selection of this concern as the only approved source for the repair or service of the components and equipment listed on the attached is based on the following information:

The contractor was established as the DOP to repair the items listed on the attached to an "as new" (while not maintaining the appearance of newness) condition. To ensure the "as new" condition, fully adequate drawings and quality assurance procedures are necessary. Only the contractor listed above 'possesses this necessary data.

The GFM (piece parts) and/or GFE (test equipment) described in paragraph 3 d above will only be.acquired/repaired/maintained when the government does not have in its possession sufficient, accurate, or legible data to purchase these piece parts and/or test equipment form other than the current source.

6. GPE Notice/Potential Sources - Efforts will be made to ensure. that potential subcontractors will be aware of these requirements by posting notice of. the proposed BOA through the Government wide Point of Entry.

7. Determination of Fair and Reasonable Cost- The contracting officer has determined that .the anticipated cost to the government will be fair and reasonable.

8. Description of Market Survey- Market Research was previously conducted before the award of the current contract with an RFI posted to Federal Business Opportunities and Navy Electronic Commence Online on December 06, 2012. No additional market research was conducted for the purpose of this J&A because the current contract was previously competed among sources. Once the J&A is approved the requirement will be posted to NECO and FBO to confirm the Market Research results.

9. Any Other Supporting Facts - Other facts supporting the use of other than full and open competition are: None.

• ,.. • J

10. Listing of Interested Sources - The following sources have expressed, in writing, an interest in this acquisition:

No contractors have expressed an interest in the proposed class of contracts (orders) at this time.

11. Actions Taken to Remove Barriers to Competition- In accordance with DFARs, Appendix _E, a yearly review and certification of items listed on the attached for the purpose of introduction of competition will be held. Various RMCs are noted for the NSN attachedi all RMCs that had a code of 0, 1, or 2 were removed along with any "H" coded requirements. The following codes are being utilized: 3B, 3C, 3R, 3Q, 3Y, 5B, 5N, 5R and 5Y, please find their information on page(s) 4 of 6 and 5 of 6.

12. Statement of Delivery Requirements -Delivery requirements cannot be identified because they are dependent on the intermittent receipt of carcasses from the fleet and the extent of repair required. See attached turnaround times.

13. Total estimated dollar value of the acquisition covered by this J&A, with funding specified by appropriation source and appropriation data: The estimated cost of the class of contract (orders) proposed is $17,500,000.00 through 14 JULY 2019. The appropriation will be Navy Working Capital Funds for Depot Level Repair Rework.

Appropriation: 97X4930.NC1A

14. Reference to the Approved Acquisition Plan (AP) -An Acquisition Plan is not required.

15. Documentation for Spare/Repair Parts Acquisitions - N/A

16. The specifications have been reviewed, and they reflect the government's minimum requirements.

17. TECHNICAL AND REQUIREMENTS CERTIFICATION:

I certify that the facts and representations under my cognizance which are included in this justification and its supporting Acquisition Plan No. (N/A) and which form a basis for this justification are complete and accurate.

Technical Cognizance

Name and Title Code Phone Date

18. CONTRACTING OFFICE CERTIFICATION:

19. REVIEWED:

(Signature) )-/«e,-t'f

Competition Code Phone Date

FICIENCY BY COUNSEL (Over ~K)

1£ Code Phone Date

Based on the above justification, the proposed class of contracts described herein may utilize other than full and open competition for the period of the effective date of this J & A through 14 JULY 2019.

Approved (Over $550K) :

(Signature)

APPROVAL LEVELS:

Contracting Officer:

Competition Advocate:

HCA:

ASN (RD&A):

Code

Up to $550,000 $550,001 to $11,500,000 $11,500,001 to $78,500,000 over $78,500,000

Phone

•., • 'r'

3B Acquire, for the second or subsequent time, directly from the actual manufacturer.

This part must be acquired from a manufacturing source (s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100.

Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application.

Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained.

3C Acquire, for the second or subsequent time, directly from the actual manufacturer.

This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.

3R Acquire, for the second or subsequent time, directly from the actual manufacturer.

The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights.

SR Acquire directly from a sole source contractor which is not the actual manufacturer. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights.

SY Acquire directly from a sole source contractor which is not the actual manufacturer. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved. Major changes are contemplated because the part has a low process yield or has demonstrated marginal performance during tests or service use. These changes will render the present part obsolete and unusable in its present configuration. Limited acquisition from the present source is anticipated pending configuration changes.

BOA

N0010414GA300

SERIAL NUMBER: 8422

NSN 7H 4320 000030271

PUMP, ROTARY

P/N 2862408

LRC -BU5

NSN 7H 1020 001625161

VALVE ASSEMBLY, REL

P/N 2862400

LRC -BU5

NSN 7H 1 020 008896979

CYLINDER, RESTRAININ

P/N 2527261

LRC-BU5

NSN 7H 1 020 008897043

CHAIN ASSEMBLY

P/N LM2527151

LRC- BU5

NSN 7H 4320 009376456

PUMP, ROTARY

P/N 2527215

LRC- BU5

NSN 7H 1015010451428

PISTON, SHORT RECOIL

P/N 5517777

LRC- BF1

NSN 7H 1 015 01 07 40682

VALVE BLOCK ASSEMBL

P/N 5517880

LRC -BF1

NSN 7H 1 015 01 07 40687

RECTIFIER BOARD ASS

P/N 5517687

LRC -BF1

NSN 7H 5998 01 07 40701

ELECTRONIC COMPONEN

P/N 5517660

LRC- BF1

Head Cage Q064S4

RTAT Days:

RMC: 3B

RTAT Days:

RMC: 3B

RTAT Days:

RMC: 3B

RTAT Days:

RMC: 3R

RTAT Days:

RMC: 3B

RTAT Days:

RMC: 3R

RTAT Days:

RMC: 3C

RTAT Days:

RMC: 3B

RTAT Days:

RMC: 3B

. 239

PCO

7YG

e BOA Head Cage PCO

N0010414GA300 Q064S4 7YG

SERIAL NUMBER: 8422

NSN 7H 5998 01 07 40707 RTAT Days: 139

RELAY AND SWITCH RMC: 30

P/N 5517700

LRC- BF1

NSN 7H 5998010740710 RTAT Days: 139

VALVE ASSY, CONTROL RMC: 3R

P/N 5520849

LRC -BF1

NSN 7H 1015010740716 RTAT Days: 151

FIRING CUT-OUT MECH RMC: 3B

P/N 5517995

LRC -BF1

NSN 7H 6130010740767 RTAT Days: 245

POWER SUPPLY RMC: 3B

P/N 5517610

LRC -BF1

NSN 7H 6130010740768 RTAT Days: 148

POWER SUPPLY RMC: 3B

P/N 5517730

LRC -BF1

NSN 7H 5895 01 07 40802 RTAT Days: 162

CONTROL-POWER SUPPL RMC: 3B

P/N 5517710

LRC -BF1

NSN 7H 5998 01 07 40807 RTAT Days: 162

CIRCUIT CARD ASSEMBLY RMC: 3B

P/N 5517650

LRC- BF1

NSN 7H 1015 011744229 RTAT Days: 203

BREECH MECHANISM RMC: 3R

P/N 5518019

LRC -BF1

NSN 7H 1015011874773 RTAT Days: 232

BREECH MECHANISM RMC: 3B

P/N 5518020

LRC- BF1

NSN 7H 1 020 011887795 RTAT Days: 355

LATCH ASSEMBLY RMC: 3B

P/N 5209524

LRC -BU5

e

N0010414GA300 Q064S4 7YG

SERIAL NUMBER: 8422

. NSN 7H 5998 012105723 RTAT Days: 133

ELECTRONIC COMPONEN RMC: 38

P/N 5519980

LRC -BF1

NSN 7H 4810012244634 RTAT Days: 206

VALVE, LINEAR, DIRECT RMC: 38

P/N 2862422

LRC -BU5

NSN 7H 5950012451654 RTAT Days: 226

CHARGER, MAGNET RMC: 3R

P/N 3000422

LRC -BU5

NSN 7H 5998 012559733 RTAT Days: 219

ELECTRONIC COMPONEN. RMC: 38

P/N 5520747

LRC- BF1

NSN 7H 1 015 012683082 RTAT Days: 201

TRAINING AMPLIFIER RMC: 38

P/N 5521228

LRC- BF1

NSN 7H 6130 013605637 RTAT Days: 199

POWER SUPPLY RMC: 38

P/N 5521373

LRC -BF1

NSN 7H 5998 013833260 RTAT Days: 192

ELECTRONIC COMPONEN RMC: 38

P/N 5520728

LRC -BF1

NSN 7H 5998 014064490 RTAT Days: 280

CIRCUIT CARD ASSEMBLY RMC: 3R

P/N 5788057

LRC -BU5

NSN 7H 5999 015039486 RTAT Days: 230

SWITCH BOX ASSY RMC: 38

P/N 7249370

LRC -BU5

NSN 7H 5998 0150617 47 RTAT Days: 129

CIRCUIT CARD ASSEMB RMC: 38

P/N 6778853-0001

N0010414GA300 Q064S4 7YG

SERIAL NUMBER: 8422

NSN 7H S998 01S0617S7 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: 3B

P/N 7249S93

LRC -BUS

NSN 7H S998 01S0617S8 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: SN

P/N 7249S93-2

LRC -BUS

NSN 7H S998 01S061962 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: 3B

P/N 72S0227

LRC -BUS

NSN . 7H S998 01 S061 967 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: 3B

P/N 72S0229

LRC -BUS

NSN 7H S998 01S061969 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: 3R

P/N 72S0847

LRC -BUS

NSN 7H S998 01 S061 976 RTAT Days: 12S

CIRCUIT CARD ASSEMB RMC: 3R

P/N 72S0231

LRC -BUS

NSN 7H 4820 01S063180 RTAT Days: 2S4

VALVE, SAFETY RELIEF RMC: 3B

P/N 7249S20

LRC -BUS

NSN 7H 5998 01 50641 59 RTAT Days: 254

CIRCUIT CARD ASSEMBLY RMC: 3B

P/N 72S023S

LRC -BUS

NSN 7H 5998 01 50641 77 RTAT Days: 254

CIRCUIT CARD ASSEMBLY RMC: 3B

P/N 8240462-1

LRC -BUS

NSN 7H S998 01 S064 1 80 RTAT Days: 2S4

CIRCUIT CARD ASSEMBLY RMC: 3B

P/N 8240447-1

LRC -BUS

SERIAL NUMBER: 8422

NSN 7H 5998 015303155 RTAT Days: 254

PRINTED WIRING BOAR RMC: 5Y

P/N 7250223

LRC -BU5

NSN 7H 5998 015303157 RTAT Days: 254

PRINTED WIRING BOAR RMC: 3R

P/N 7251244-2

LRC -BU5

NSN 7H 5998 015303433 RTAT Days: 254

PRINTED WIRING BOAR RMC: 3R

P/N 7251244-1

LRC -BU5

NSN 7H 5998 015309844 RTAT Days: 25

CIRCUIT CARD ASSEMB RMC: 3B

P/N 5788042-0005

LRC -BU5

NSN 7HH 1260 015388873 RTAT Days: 78 MUL Tl FUNCTION DSPL RMC: 3B P/N 8180372

LRC-BM4

NSN 7H 5895 015453481 RTAT Days: 173

CONTROL-POWER SUPPL RMC: 3B

P/N 5521362

LRC -BF1

NSN 7H 1 020 015526404 RTAT Days: 185

PLATFORM ASSEMBLY RMC: 3B

P/N 7251619

LRC -BU5

NSN 7H 8140 015658825. RTAT Days: 192

BOX, AMMUNITION RMC: 3B

P/N TYUW13000A

LRC-BM4

NSN 7H 1005 015661544 RTAT Days: 192

TRAV RESOLVER ASSY RMC: 3B

P/N TYUW54200A-E

LRC-BM4

NSN 7H6160 015661661 RTAT Days: 192

BATTERY BOX RMC: 3B

P/N TYUW13530A

LRC-BM4

SERIAL NUMBER: 8422

NSN 7H 1005 015661663 RTAT Days: 232

CONTROL UNIT, ELECTR RMC: 38

P/N TYUW40000B

LAC -BM4

NSN 7H 1005 015661668 RTAT Days: 153

PSU MODULE RMC: 38

P/N TYUW30000A

LRC-BM4

NSN 7H 5998 015661679 RTAT Days: 192

PRINTED CIRCUIT BOA RMC: 38

P/N TYUC11820B

LRC-BM4

NSN 7H 1005 015661681 RTAT Days: 175

MDCU RMC: 38

P/N TYUW80000B

LRC-BM4

NSN 7H 1005 015661688 RTAT Days: 192

DSC CARD RMC: 38

P/N TYUW82000A

LRC-BM4

NSN 7H 1005 015661816 RTAT Days: 192

GYRO AND ACCESSORY RMC: 38

P/N TYUW57000A

LRC-BM4

NSN 7H 1005015661841 RTAT Days: 192

TRAVERSE DECOUPLING RMC: 58

P/N TYUW33500A

LRC-BM4

NSN 7H 1005 015661843 RTAT Days: 192

SKIRT ASSY RMC: 38

P/N TYUW12000A

LRC-BM4

NSN 7H 1005 015661844 RTAT Days: 280

SAFETY MAN. SWITCH RMC: 38

P/N TYUW70000A

LRC-BM4

NSN 7H 1005 015661846 RTAT Days: 192

ACTUATOR, ELEVATION RMC; 38

P/N TYUW32000A

N0010414GA300 Q064S4 7YG

SERIAL NUMBER: 8422

NSN 7H 1 005 015661848 RTAT Days: 192

EL DECOUPLING UNIT RMC: 38

P/N TYUW33000B

LRC -BM4

NSN 7H 1 005 015661850 RTAT Days: 192

SECTOR GEAR ASSY RMC: 38

P/N TYUW17010A

LRC -BM4

NSN 7H 1 005 015661851 RTAT Days: 232

EL RESOLVER ASSY RMC: 38

P/N TYUW53000A-E

LRC -BM4

NSN 7H 1005015661911 RTAT Days: 192

CANNON SUPPORT ASSY RMC: 38

P/N TYUW14500B

LRC-BM4

NSN 7H 1005015661912 RTAT Days: 192

CANNON COVER ASSY RMC: 38

P/N TYUW14000A

LRC -BM4

NSN 7H 1005 015661913. RTAT Days: 192

LEFT ROD ASSY RMC: 38

P/N TYUW14100A

LRC -BM4

NSN 7H 1005015661914 RTAT Days: 232

SHOULDERS ASSY RMC: 38

P/N TYUW14700A

LRC-BM4

NSN 7H 1 005 015661915 RTAT Days: 477

MANUAL FIRING PANEL RMC: 38

P/N TYUC50000A

LRC-BM4

NSN 7H 1005015661916 RTAT Days: 477

UTILITY BOX ASSY RMC: 38

P/N 7626147

LRC-BM4

NSN 7H 1 005 015661917 RTAT Days: 281

DUAL AXIS FOG GYRO RMC: 38

P/N 1940018286

BOA Head Cage PCO

N0010414GA300 Q064S4 7YG

SERIAL NUMBER: 8422

NSN 7H 1 005 015662005 RTAT Days: 232

COMMAND SAFETY PNL RMC: 3R

P/N TYUC20000A

LRC -BM4

NSN 7H 1 005 01566201 0 RTAT Days: 182

CHARGER BOX RMC: 38

P/N TYUS1000C

LRC -BM4

NSN 7H 1 005 015673039 RTAT Days: 398

RIGHT HANDLE RMC: 38

P/N TYPC11200A

LRC -BM4

NSN 7H 1 005 015673045 RTAT Days: 192

LEFT HANDLE RMC: 38

P/N TYPC11400A

LRC-BM4

NSN 7H 1 005 015673057 RTAT Days: 192

PANEL ASSY, FRONT RMC: 38

P/N TYUC11600A

LRC -BM4

NSN 7HH 6920 015697066 RTAT Days: 78

PANEL, CONTROL, ELECT RMC: 3B

P/N TYUC11 OOOA

LRC-BM4

NSN 7H 1 01 0 015771704 RTAT Days: 185

STANCHION ASSEMBLY RMC: 3B

P/N 5520478

LRC -BF1

NSN 7H 5998 015787924 RTAT Days: 78

CHARGER VENTS ASSY RMC: 3B

P/N OGZZ-0003

LRC -BM4

NSN 7H 1 005 015865729 RTAT Days: 477

BORESIGHT ALIGNMENT RMC: 3C

P/N 7626361-1

LRC-BM4

NSN 7H 5998 015869376 RTAT Days: 78

AMMUNITION ID SENSO RMC: 3C

P/N 7403560-1

' - ', • • BOA Head Cage PCO

N0010414GA300 006454 7YG

SERIAL NUMBER: 8422

NSN 7H S998 01S92267S RTAT Days: 78

PWA NFZ-NPZ MEMORY RMC: SN

P/N 8240429

LRC -BUS

NSN ?H 7025 015943338 RTAT Days: 78

PWA, GUN CONTROL CPU RMC: 3B

P/N 72S1931-3

LRC -BUS

NSN 7H 1 OOS 016040184 RTAT Days: 36S

CHARGERVENTASSEM RMC: 3B ·

P/N OROS-0002

LRC- BM4

NSN 7H 1 OOS 0160630S4 RTAT Days: 36S

CHARGER BOX RMC: 3B

P/N TYUS1 OOOOC

LRC- BUS