N00104-10-G-A302_J A.pdf

DEPARTMENT OF THE NAVY

NAVSUP Weapon Systems Support-MECHAN I CSBURG

P 0 BOX 2020

MECHANCISBURG, PA 17055-0788

I N REPLY REFER TO:

Serial No.3864 DATE 2014 February 25

Class Justification and Approva l No . N00104-10-G-A302

Justification for Other than Full and Open Competition

1 . Identification of Agency and Contracting- The NAVSUP Weapons Systems Support proposes to acquire on a noncompetitive basis the class of contracts described in this justification for other than full and open competition .

2. Nature / Description of Action- For the reasons set forth in this Class Justification and Approval, authority is given to utilize other than full and open competition for the commercial repair, modification or servicing, as appropriate, for the items listed on the attached on a noncompetitive basis.

3. Description of Supp l ies /Services - NAVSUP Weapons Systems Support's log i stic support program is predicated upon an establ ished turn-around time (TAT) . This TAT cycle begins with the time of removal of the item from the ship or Naval Supply Center and includes the overall time requ i red for shipment, repair, and redelivery into Navy inventory. To the extent that this TAT cycle cannot be maintained, a proportionately greater investment in spares woul d be required.

The Master Repairab l es Item List (MRI L) designates the shipping point o f retrograde mater i al, either direct to a Designated Overhaul Po i nt (DOP) or collected at a stock point. The MRIL is updated monthly to preclude time l oss (for those items having repair requirements ) and increased transportat i on costs.

Demand changes , CASREP requirements, and carcass availabi l ity make shipment of repairables an unknown. Therefore, it is essential that the justification and approval and contractual arrangements for repair be made in advance of the actua l need for such repair .

The c l ass of contracts proposed (o rders under Basic Order i ng Agreement) wil l :

a. Be for commerc i a l repair, modification and servicing as appropriate for items listed on the attached (Major Weapon Systems supported: The Submarine Control System is the dash board which controls the steering, speed, and div i ng. )

b. Apply to those components or equipment, which are l isted on the attached, or those items, which are later government - approved configurations thereof. Al l such l ater configurations that are authorized to be serviced under the Basic Ordering Agreement wi l l be specifical ly identified i n an exhibit to said agreement.

l

c. Generally provide for teardown, inspection, repair, modification, test, and service necessary to restore the item to serviceable operating condition. The extent of servicing necessary cannot be determined until the equipments are received by the contractor, disassembled and an inspection made. The work to be performed under the Basic Ordering Agreement will relate only to previously produced components or equipment;

it will not include any research and development effort; nor will it include the furnishing of any parts, components, subassemblies or materials not an integral part of the work described herein.

d. Include the acquisition/ repair of sole source Government Furnished Material (GFM) (piece parts)) and / or the acquisition / repair / maintenance of sole source Government Furnished Equipment (GFE) (test equipment) ) when determined necessary to complete repairs or meet established RTAT cycle.

e. Include the acquisition of Commercial Asset Visibility reporting for repair efforts performed under subject agreement.

4 . Identification of Statutory Authority- The authority permitting other than full and open competition is Title 10 USC 2304 (c) (1), as implemented by paragraph 6.302-1 of the Federal Acquisition Regulation.

5. Demonstration of Contractor's Unique Qualifications- The proposed class of contracts will be acquired on a sole source basis with Electric Boat Corp. ( 96169). The selection of this concern as the only approved source for the repair or service of the components and equipment listed on the attached is based on the following information:

The contractor was established as the DOP to repair the items listed on the attached to an "as new" (while not maintaining the appearance of newness) condition. To ensure the "as new" condition, fully adequate drawings and quality assurance procedures are necessary. Only the contractor listed above possesses this necessary data.

The GFM (piece parts) and / or GFE (test equipment) described in paragraph 3 d above will only be acquired/ repaired / maintained when the government does not have in its possession sufficient, accurate, or legible data to purchase these piece parts and/ or test equipment from other than the current source.

6. GPE Notice / Potential Sources -Efforts will be made to ensure that potential subcontractors will be aware of these requirements by posting notice of the proposed BOA through the Government wide Point of Entry.

7. Determination of Fair and Reasonable Cost -The contracting officer has determined that the anticipated cost to the government will be fair and reasonable.

8. Description of Market Survey- A market survey will be conducted by synopsizing the proposed BOA through the Government wide Point of Entry; any source which shows an interest in it will be given an opportunity to compete.

9 . Any Other Supporting Facts - Other facts supporting the use of other than full and open competition are: None .

10. Listing of Interested Sourc es - The following sources have expressed, in writing, an interest in this acquisition:

No contractors have expressed an interest in the proposed c lass of contracts (orders) .

11. Actions Taken to Remove Barriers t o Compet ition- In accordance with BOSS Breakout Program and DFARs, Appendix E, a yearly review and cert ification of items listed on the attached for the purpose of introduction of compet i tion will be held.

12. Statement of Delivery Requirements- Delivery requirements cannot be identified because they are dependent on the intermittent receipt of carcasses from the fleet and the extent of repair required. See attached turnaround times.

13. Total estimated dollar value of the acqui sition covered by this J&A, with funding specified b y appropriation source and appropriation data: The estimated cost of the class of contrac t (orders ) proposed is $310,010.00 through 24 February 2015 . The appropriation will be Navy Working Capital Funds for Depot Level Repair Rework.

Appropriation: 97X4930.NC1A

14. Reference to the Approved Acquisition Plan (AP ) -An Acquisition Plan is not required.

15 . Documentation for Spare / Repair Parts Acquisitions - N/ A

16 . The specifications have been reviewed, and they reflect the government's minimum requirements.