N00024-17-R-5381_(SF33).pdf

25 October 2016

N00024-17-R-5381

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

CLIN

Number

FY17 Multi-Mode Radar (MMR) System

FFP

1 Each

Manufacture, inspect, test and deliver first production Multi-Mode Radar (MMR) System(s).

FOB: Destination

PURCHASE REQUEST NUMBER: N0002416NR42086

NET AMT

FY17 Multi-Mode Radar (MMR) System

Each

Manufacture, inspect, test and deliver FY17 production Multi-Mode Radar (MMR) System(s).

See Note A, below

STEPLADDER PRICING

STEPLADDER NAME ITEM NO FROM QUANTITY TO QUANTITY UNIT PRICE

CLIN 0002 0002 0.00 1.00

1.01 2.00

Enhanced Data Rights

1 Lot

OPTION Enhanced Data Rights And Technical Data Package.

See Note B, below

11,500 Labor Hours

OPTION FY17 Technical Engineering Services Level of Effort (LOE)

See Notes B and C, below

FOB: Destination

CPFF

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

500 Labor

OPTION FY17 Field Engineering Services

See Notes B and C, below

FOB: Destination

1 Lot $50,000.00 NTE

OPTION FY17 Travel and Other Direct Costs (ODC)

COST

FY17 Travel and Other Direct Costs (ODC) in Support of CLINs 0008 and 0009 Engineering Services.

See Notes B and D, below

ESTIMATED COST $50,000.00 NTE

FY18 Multi-Mode Radar (MMR) System

OPTION Manufacture, inspect, test and deliver FY18 production Multi-Mode Radar (MMR) System(s).

See Notes A and B, below

CLIN 1002 1002 0.00 1.00

1.01 2.00

10,000 Labor

OPTION FY18 Technical Engineering Services

See Notes B and C, below

FOB: Destination

2,000 Labor

OPTION FY18 Field Engineering Services

See Notes B and C, below

FOB: Destination

1 Lot $80,000.00 NTE

OPTION FY18 Travel and ODC

COST

FY18 Travel and Other Direct Costs (ODC) in Support of CLINs 1008 and 1009 Engineering Services.

See Notes B and D, below

ESTIMATED COST $80,000.00 NTE

FY19 Multi-Mode Radar (MMR) System

OPTION Manufacture, test, inspect and deliver FY19 production Multi-Mode Radar (MMR) System(s).

See Notes A and B, below

CLIN 2002 2002 0.00 1.00

1.01 2.00

2.01 3.00

3.01 4.00

2,000 Labor

OPTION FY19 Technical Engineering Services

See Notes B and C, below

FOB: Destination

OPTION FY19 Field Engineering Services

See Notes B and C, below

FOB: Destination

OPTION FY19 Travel and ODC

COST

FY19 Travel and Other Direct Costs (ODC) in Support of CLINs 2008 and 2009 Engineering Services.

See Notes B and D, below

FY20 Multi-Mode Radar (MMR) System

OPTION Manufacture, test, inspect and deliver FY20 production Multi-Mode Radar (MMR) System(s).

See Notes A and B, below

CLIN 3002 3002 0.00 1.00

1.01 2.00

2.01 3.00

3.01 4.00

4.01 5.00

10,000 Labor

OPTION FY20 Technical Engineering Services

See Notes B and C, below

FOB: Destination

5,500 Labor

OPTION FY20 Field Engineering Services

See Notes B and C, below

FOB: Destination

OPTION FY20 Travel and ODC

COST

FY20 Travel and Other Direct Costs (ODC) in Support of CLINs 3008 and 3009 Engineering Services.

See Notes B and D, below

FY21 Multi-Mode Radar (MMR) System

OPTION Manufacture, test, inspect and deliver FY21 production Multi-Mode Radar (MMR) System(s).

See Notes A and B, below

CLIN 4002 4002 0.00 1.00

1.01 2.00

2.01 3.00

3.01 4.00

4.01 5.00

5.01 6.00

OPTION FY21 Technical Engineering Services

See Notes B and C, below

FOB: Destination

4,500 Labor

OPTION FY21 Field Engineering Services

See Notes B and C, below

FOB: Destination

1 Lot $50,000.00 NTE

OPTION FY21 Travel and ODC

COST

FY21 Travel and Other Direct Costs (ODC) in Support of CLINs 4008 and 4009 Engineering Services.

See Notes B and D, below

ESTIMATED COST $50,000.00 NTE

Provisioned Items Orders (PIO)

1 Lot TBN

See Note E, below

NET AMT TBN

Data

1 Lot NSP

Incorporated into the price of CLINs 0001, 0002, 9800 and, if exercised, Option CLIN(s) 0007, 0008, 0009, 0010, 1002, 1008, 1009, 1010, 2002, 2008, 2009, 2010, 3002, 3008, 3009, 3010, 4002, 4008, 4009 and 4010 (See DD Form 1423, Exhibit A).

See Note F, below

NET AMT NSP

NOTE A

Stepladder Pricing. Stepladder pricing is utilized in this solicitation to provide Offerors an opportunity to propose different pricing for separate and distinct quantity ranges within each CLIN. Pricing utilized at basic contract award and option exercise shall be based solely on the pricing proposed by the Offeror in Section B of their submitted Standard Form (SF) 33. Notwithstanding the availability of the option to propose different pricing for different quantities, the Offeror may propose the same price for multiple quantities.

The Government will determine the quantity of the base CLIN 0002 at award.

For all option CLINs with stepladder pricing, (CLINs 1002, 2002, 3002, and 4002) the Government may unilaterally exercise a given line item more than once prior to the latest option exercise date identified in clause FAR 52.217-7 (see Section I). Option CLINs with stepladder pricing may be exercised until the total quantity purchased equals the maximum quantity listed for that option CLIN in Section B.

If any line item is exercised more than once within a 90 day period from the date the Option was initially exercised, the unit price of the CLIN shall be adjusted downward to reflect the appropriate stepladder unit price for the entire quantity purchased within that 90 day period and funds will be realigned, as necessary.

The following hypothetical example illustrates how pricing will be adjusted for option CLIN 0000 if the line item is unilaterally exercised more than once within a 90 day period:

CLIN 0000

Step-ladder Quantity Unit Price 100 – 200 $150 201 – 300 $120 301 – 400 $100

Upon first exercise of option, $22,500 is obligated to subline item (SLIN) 0000AA to provide funds to acquire a quantity of 150 units at a unit cost of $150.

150*$150 = $22,500

Upon second exercise of option, $12,500 is obligated to SLIN 0000AB to provide funds to acquire a total quantity of 350 units at a unit cost of $100.

350*$100 = $35,000

Following exercise of our first two options for CLIN 0000, our contract CLIN structure for CLIN 0000 is as follows:

CLIN SLIN UNIT COST EXTENDED PRICE FUNDED AMOUNT

0000 $100.00 $35,000 $35,000

0000 AA $150 $22,500 $22,500

0000 AB $62.50 $12,500 $12,500

NOTE B

Option item to which the option clause in SECTION I applies and which is to be supplied only if and to the extent said option is exercised.

NOTE C

Offerors shall complete the table below for proposed Cost-Plus-Fixed-Fee (CPFF) Engineering Support Services line items. The Fixed Fee proposed by the Offeror shall not exceed six percent of the estimated cost. If a fixed fee greater than six percent is proposed, the Offeror’s proposal shall be rejected and the Offeror submitting the proposal shall be not be further considered for award.

FIXED FEE TABLE

CLIN QTY (Hrs.) Estimated Cost Rate (Hourly Rate)

Fixed Fee Rate (Hourly Rate)

FIXED FEE

(Hrs.* Fixed Fee Rate)

ESTIMATED COST

(Hrs.* Estimated Cost Rate)

0008 11,500

0009 500

1008 10,000

1009 2,000

2008 2,000

2009 500

3008 10,000

3009 5,500

4008 500

4009 4,500

NOTE D

Cost only line item to which fee shall not apply. The Contractor may invoice for allowable direct costs up to the Not-To-Exceed amount for each CLIN. No indirect cost(s) or burdens are allowed for these CLINs.

NOTE E

Provisioned Item Orders (PIO) may be placed against this line item and the pricing thereof shall be established by the parties to the contract on a firm fixed price basis prior to the award of each order. See HQ C-1-0003 ITEM(S)

9800 - PROVISIONED ITEMS ORDERS (NAVSEA) (APR 2015).

NOTE F

Offerors shall enter the "Price Group" and "Estimated Total Price" values for each data item (Blocks 17 and 18) on Attachment J-S1.

CLAUSES INCORPORATED BY FULL TEXT

HQ B-2-0004 EXPEDITING CONTRACT CLOSEOUT (NAVSEA) (DEC 1995)

(a) As part of the negotiated fixed price or total estimated amount of this contact, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $500 or less at the time of final contract closeout. The term “residual dollar amount” shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party may be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

HQ B-2-0007 LIMITATION OF COST/LIMITATION OF FUNDS (NAVSEA) (SEP 1990)

The clause entitled "LIMITATION OF COST" (FAR 52.232-20) or "LIMITATION OF FUNDS" (FAR 52.232-22), as appropriate, shall apply separately and independently to each separately identified estimated cost.

Applicable CLINs: 0008, 0009, 0010, 1008, 1009, 1010, 2008, 2009, 2010, 3008, 3009, 3010, 4008, 4009, 4010

HQ B-2-0015 PAYMENT OF FEES(S) (LEVEL OF EFFORT – ALTERNATE I) (NAVSEA) (MAY 2010)

(a) For purposes of this contract, "fee" means "target fee" in cost-plus-incentive-fee type contracts, "base fee" in cost-plus-award-fee type contracts, or "fixed fee" in cost-plus-fixed-fee type contracts for level of effort type contracts.

(b) The Government shall make payments to the Contractor, subject to and in accordance with the clause in this contract entitled "FIXED FEE" (FAR 52.216-8) or "INCENTIVE FEE", (FAR 52.216-10), as applicable. Such payments shall be submitted by and payable to the Contractor pursuant to the clause of this contract entitled "ALLOWABLE COST AND PAYMENT" (FAR 52.216-7), subject to the withholding terms and conditions of the "FIXED FEE" or "INCENTIVE FEE" clause, as applicable, and shall be paid at the hourly rate(s) specified above per man-hour performed and invoiced. Total fee(s) paid to the Contractor shall not exceed the fee amount(s) set forth in this contract. In no event shall the Government be required to pay the Contractor any amount in excess of the funds obligated under this contract.

Applicable CLINs: 0008, 0009, 1008, 1009, 2008, 2009, 3008, 3009, 4008, 4009

HQ B-2-0016 PROVISIONING TECHNICAL DOCUMENTATION – WITHHOLDING OF PAYMENT

(NAVSEA) (SEP 1990)

(a) For the purpose of paragraph (c) of the "PROGRESS PAYMENTS" clause of this contract, if included, the requirement that the Contractor develop and deliver Provisioning Technical Documentation (PTD) is considered to be a "material requirement of this contract," and Contractor failure to make adequate progress in the development of PTD, or to deliver acceptable PTD on a timely basis, may result in reduction or suspension of Progress Payments as provided in said paragraph.

(b) The PTD is considered to be a part of the "Technical Data" specified to be delivered under this contract for the purposes of the "TECHNICAL DATA--WITHHOLDING OF PAYMENT" (DFARS 252.227-7030) clause. The terms and conditions of the clause entitled "LIMITATION ON WITHHOLDING OF PAYMENTS (FAR 52.232-9), if included in this contract, shall not apply to withholding of payment for failure to make timely delivery of the PTD or delivery of deficient PTD.

HQ B-2-0017 REFUNDS (SPARES AND SUPPORT EQUIPMENT) (NAVSEA) (SEP 1990)

(a) In the event that the price of a spare part or item of support equipment delivered under this contract significantly exceeds its intrinsic value, the Contractor agrees to refund the difference. Refunds will only be made for the difference between the intrinsic value of the item at the time an agreement on price was reached and the contract price. Refunds will not be made to recoup the amount of cost decreases that occur over time due to productivity gains (beyond economic purchase quantity considerations) or changes in market conditions.

(b) For purposes of this requirement, the intrinsic value of an item is defined as follows:

(1) If the item is one which is sold or is substantially similar or functionally equivalent to one that is sold in substantial quantities to the general public, intrinsic value is the established catalog or market price, plus the value of any unique requirements, including delivery terms, inspection, packaging, or labeling.

(2) If there is no comparable item sold in substantial quantities to the general public, intrinsic value is defined as the price an individual would expect to pay for the item based upon an economic purchase quantity as defined in

FAR 52.207-4, plus the value of any unique requirements, including delivery terms, inspection, packaging or labeling.

(c) At any time up to two years after delivery of a spare part or item of support equipment, the Contracting Officer may notify the Contractor that based on all information available at the time of the notice, the price of the part or item apparently exceeds its intrinsic value.

(d) If notified in accordance with paragraph (c) above, the Contractor agrees to enter into good faith negotiations with the Government to determine if, and in what amount, the Government is entitled to a refund.

(e) If agreement pursuant to paragraph (d) above cannot be reached, and the Navy's return of the new or unused item to the Contractor is practical, the Navy, subject to the Contractor's agreement, may elect to return the item to the Contractor. Upon return of the item to its original point of Government acceptance, the Contractor shall refund in full the price paid. If no agreement pursuant to paragraph (d) above is reached, and return of the item by the Navy is impractical, the Contracting Officer may, with the approval of the Head of the Contracting Activity, issue a Contracting Officer's final decision on the matter, subject to Contractor appeal as provided in the "DISPUTES" clause (FAR 52.233-1).

(f) The Contractor will make refunds, as required under this requirement, in accordance with instructions from the Contracting Officer.

(g) The Contractor shall not be liable for a refund if the Contractor advised the Contracting Officer in a timely manner that the price it would propose for a spare part or item of support equipment exceeded its intrinsic value, and with such advice, specified the estimated proposed price, the estimated intrinsic value and known alternative sources or item, if any, that can meet the requirement.

(h) This requirement does not apply to any spare parts or items of support equipment whose price is determined through adequate price competition. This requirement also does not apply to any spare part or item of support equipment with a unit price in excess of $100,000; or in excess of $25,000 if the Contractor submitted, and certified the currency, accuracy and completeness of, cost or pricing data applicable to the item.

HQ B-2-0020 TRAVEL COSTS – ALTERNATE I (NAVSEA) (APR 2015)

(a) Except as otherwise provided herein, the Contractor shall be reimbursed for its actual travel costs in accordance with FAR 31.205-46. The costs to be reimbursed shall be those costs determined to be allowable, allocable and reasonable by the Procuring Contracting Officer, Administrative Contracting Officer or their duly authorized representative, as advised by DCAA.

(b) Reimbursable travel costs include only that travel performed from the Contractor's facility to the worksite, in and around the worksite, and from the worksite to the Contractor's facility.

(c) Relocation costs and travel costs incidental to relocation are allowable to the extent provided in FAR 31.205-35;

however, Contracting Officer approval shall be required prior to incurring relocation expenses and travel costs incidental to relocation.

(d) The Contractor shall not be reimbursed for the following daily local travel costs:

(i) travel at U.S. Military Installations where Government transportation is available,

(ii) travel performed for personal convenience/errands, including commuting to and from work, and

(iii) travel costs incurred in the replacement of personnel when such replacement is accomplished for the Contractor's or employee's convenience.

Applicable CLINs: 0010, 1010, 2010, 3010, 4010

HQ B-2-0023 CONTRACT SUMMARY FOR PAYMENT OFFICE (COST/FIXED PRICE) (FEB 1997)

This contract includes the following mixture of cost reimbursement and fixed price line items:

Item Type

0001 Firm-Fixed-Price (FFP)

0002 FFP

0004 Not Separately Priced

0007 FFP

0008 Cost-Plus-Fixed-Fee (CPFF)

0009 CPFF

0010 Cost-Only (COST)

1002 FFP

1008 CPFF

1009 CPFF

1010 COST

2002 FFP

2008 CPFF

2009 CPFF

2010 COST

3002 FFP

3008 CPFF

3009 CPFF

3010 COST

4002 FFP

4008 CPFF

4009 CPFF

4010 COST

9800 FFP (To Be Negotiated)

Section C - Descriptions and Specifications

In accordance with this statement of work and all requirements of this contract, the Contractor shall perform the work for the Offshore Patrol Cutter (OPC) Multi-Mode Radar (MMR).

Items 0001, 0002, and if exercised, Option Items 1002, 2002, 3002 and 4002 – The Contractor shall manufacture, inspect, test and deliver complete Multi-Mode Radar (MMR) Systems.

Option Item 0007 – The Contractor shall convey data rights for data items for which it has conveyed less than Government Purpose Data Rights.

* At award this description of Option Item 0007 will be revised to detail the specific rights, if any, that the successful offeror conveyed to the Government with less than Government purpose data rights. Each individual data item will be incorporated as a priced subline item to allow for purchase of all, some, or none of the data rights identified by the contractor within their proposal as an item that will be conveyed with less than Government purpose data rights.

Option Items 0008, 1008, 2008, 3008 and 4008 - The Contractor shall provide technical engineering services in support of the MMR System in accordance with applicable technical instructions pursuant to NAVSEA 5252.242-

9115 TECHNICALINSTRUCTIONS (APR 2015).

Option Items 0009, 1009, 2009, 3009 and 4009 – The Contractor shall provide field engineering services in support of the MMR System in accordance with applicable technical instructions pursuant to NAVSEA 5252.242-

9115 TECHNICAL INSTRUCTIONS (APR 2015).

Option Items 0010, 1010, 2010, 3010 and 4010 – Travel and Other Direct Costs (ODCs) required to support Option CLINs (if exercised) 0008, 0009, 1008, 1009, 2008, 2009, 3008, 3009, 4008 and 4009.

Item 9800 – Provisioned Item Orders (PIOs) may be placed against this line item in accordance with HQ C-1-0003 ITEM(S) 9998 - PROVISIONED ITEMS ORDERS (NAVSEA) (APR 2015), below.

Item 9900 – The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List (CDRL), DD Form 1423, Exhibit A, attached hereto under Section C.2.6.

STATEMENT OF WORK

1.0 SCOPE, BACKGROUND AND INTRODUCTION

1.1 SCOPE: This Statement of Work (SOW) contains the requirements for Non Developmental Item (NDI) Multi-Mode Radar (MMR) Systems modified to meet the United States Coast Guard (USCG) Offshore Patrol Cutter (OPC) integration requirements. Integration hardware and software development requirements are a part of this SOW. Requirements for engineering services, testing, test witnessing, safety, quality assurance, training materials, technical manuals, installation and check-out (INCO) material, interim spares, and enhanced data rights are also included.

1.2 BACKGROUND: PEO IWS 1CT has tasked PEO IWS 2.0 to procure and maintain MMR

Systems for the USCG OPC platform. The OPC configured MMR has operational requirements that include air surveillance, surface surveillance, and Gun Weapon System (GWS) support. The MMR provides information for OPC’s Air Defense (AD) capability that supports self-defense against advanced threats such as sea-skimming cruise missiles and attack helicopters. The MMR neutralizes the effects of rolling motion of sea targets operating in choppy coastal waters to detect and track multiple targets in three dimensions (3D) with the capability of detecting light combatants with small radar cross sections. The MMR also provides information for ship-controlled helicopter approach support and helicopter control.

1.3 INTRODUCTION: The Contractor shall modify an NDI MMR System to meet integration requirements of the OPC. Tailored Systems Engineering Technical Reviews (SETRs) focusing on the MMR modifications required as part of integration activities will be executed during Technical Interchange Meetings (TIMs) in accordance with this SOW.

2.0 APPLICABLE DOCUMENTS

The following documents form a part of this SOW. In the event of conflict between the documents referenced herein and the contents of this SOW, the contents of this SOW shall prevail.

* Offerors are advised the effective dates of current versions of these documents will be populated below immediately prior to contract award

2.1 MMR and OPC Drawings and Specifications

Document Number Title Effective Date 89-SPC-15-9558 System Specification for the Multi-Mode Radar with Classified

Addendum

89-SPC-16-9595 Interface Requirements Specification (IRS) for the Multi-Mode Radar and Control, Correlation and Display (CCD)

DD-GCS-236 Interface Requirements Specification (IRS) for the U.S. Coast Guard (USCG) Offshore Patrol Cutter (OPC) Multi-Mode Radar (MMR) and the Gun Computer System (GCS) MK 160

2.2 Military Standards, Specifications, and Handbooks

MIL-STD-31000A Technical Data Packages MIL-STD-882E System Safety MIL-STD-881C Work Breakdown Structures for Defense Materiel Items MIL-STD-464C Electromagnetic Environmental Effects Requirements for

Systems

MIL-STD-461F Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment

MIL-STD-2106A Development of Shipboard Industrial Test Procedures MIL-STD-129R Military Marking for Shipment and Storage MIL-STD-130N Identification Marking of U.S. Military Property MIL-PRF-32216A Evaluation of Commercial Off-The-Shelf (COTS) Manuals and

Preparation of Supplemental Data

MIL-HDBK-502A Product Support Analysis MIL-HDBK-470A Designing and Developing Maintainable Products and Systems MIL-HDBK-344A Environmental Stress Screening of Electronic Equipment SD-22 Diminishing Manufacturing Sources and Material Shortages

2.3 Other Government Documents

DODI 8500.01 Department of Defense Instruction, Cybersecurity DODI 8510.01 Risk Management Framework (RMF) for DoD Information

Technology (IT)

PEOIWSINST 5000.8 PEO IWS Risk Management Policy

OPNAV 5513.3C Department of the Navy List of Security Classification Guides for Surface Warfare Programs

DoD 5220.22-R Industrial Security Regulation DoD 5220.22-M National Industrial Security Program Operating Manual S9095-AD-TRQ-010/TSTP NAVSEA Total Ship Test Program Manual NAVSEAINST 8020.6E Department of the Navy Weapon Systems Explosive Safety

Review Board

SW020-AH-SAF-010 NAVSEA Weapons System Safety Guidelines Handbook NAVSEAINST 5100.12B Requirements For Naval Sea Systems Command System Safety

Program For Ships, Shipborne Systems And Equipment

NAVSEAINST 9310.1B Naval Lithium Battery Safety Program SP 800-37 Rev 1 National Institute of Standards and Technology (NIST) Guide for Applying the Risk Management Framework to Federal Information Systems: A Security Life Cycle Approach

SP 800-53 Rev 4 National Institute of Standards and Technology (NIST) Security and Privacy Controls for Federal Information Systems and Organizations

DD Form 1949-1 Logistics Support Analysis Report (LSAR) Data Requirements Form, Part I

DD Form 1949-2 Logistics Support Analysis Report (LSAR) Data Requirements Form, Part II

DD Form 1949-3 Logistics Support Analysis Report (LSAR) Data Requirements Form, Part III

2.0 CMP 002A PEO IWS 2.0 Above Water Sensors Configuration Management Plan/Procedures

2.0 CMP 002B PEO IWS 2.0 Above Water Sensors Configuration Management Plan/Procedures

OPNAVINST 5100.24B Navy System Safety Program Policy Not Assigned Operations Security (OPSEC) Guide for Defense Contractors, NAVSEA, Keyport, WA

Not Assigned DoD Joint Software Systems Safety Engineering Handbook Not Assigned NAVSEA Technical Review Manual

2.4 Commercial Documents

SAE-EIA-649-B Configuration Management Standard SAE EIA-649-1 Configuration Management Requirements For Defense

Contracts

ISO 9001-2008 Quality Management Systems 12207:2008 IEEE Standard, Systems and software engineering, Software life cycle processes

15289:2011 IEEE Standard, Systems and software engineering, content of life-cycle information products (documentation)

SAE GEIA-STD-0007 Logistics Product Data NFPA70E Standard for Electrical Safety in the Workplace

2.5 Government Furnished Information

See Attachments J-S2, J-S3, J-S4 and J-03 for Government Furnished Information (GFI) provided for the performance of this contract.

2.6 Contract Data Requirements List

The following contract data items are attached herein as Exhibit A:

Item # Title DID #

A001 MMR SYSTEM SECURITY PLAN DI-SESS-81309A

A002 OPSEC PLAN DI-MGMT-80934C

A003 CONTRACTOR WORK BREAKDOWN STRUCTURE DI-MGMT-81928

A004 INTEGRATED MASTER SCHEDULE DI-MGMT-81650

A005 CONTRACTORS’ PROGRESS, STATUS, AND MANAGEMENT REPORT DI-MGMT-81928

A006 CONFERENCE AGENDA DI-ADMN-81249B

A007 CONFERENCE MINUTES DI-ADMN-81250B

A008 GOVERNMENT FURNISHED INFORMATION DEFICIENCY REPORT DI-MGMT-80596

A009 CSAS REPORT DI-SESS-81253B

A010 SUPPLEMENTARY PROVISIONING TECHNICAL DOCUMENTATION DI-SESS-81716

A011 PROVISIONING PARTS LIST DI-SESS-80776A

A012 ENGINEERING DATA FOR PROVISIONING DI-SESS-80776A

A013 STATEMENT OF PRIOR SUBMISSION DI-SESS-80776A

A014 INSTALLATION CONTROL DRAWINGS DI-DRPR-81242

A015 ENHANCED DATA RIGHTS DRAWING PACKAGE DI-SESS-80776A

A016 DATA ACCESSION LIST (DAL) DI-MGMT-81453A

A017 AS BUILT CONFIGURATION (ABC) BILL OF MATERIALS (BOM) DI-SESS-81903

A018 BOM CHANGE IMPACT REPORT DI-MISC-80508B

A019 MMR TRAINING MATERIAL DI-ILSS-80872

A020 COMMERCIAL OFF THE SHELF (COTS) MANUALS AND

SUPPLEMENTAL DATA

DI- TMSS-80527C

A021 SOFTWARE DEVELOPMENT PLAN DI-IPSC-81427A

A022 INTERFACE DESIGN DESCRIPTION (IDD) DI-IPSC-81436A

A023 BASE MMR MODIFICATION SOFTWARE TEST PLAN DI-IPSC-81438A

A024 BASE MMR MODIFICATION SOFTWARE TEST DESCRIPTION DI-IPSC-81439A

A025 BASE MMR MODIFICATION SOFTWARE TEST REPORT DI-IPSC-81440A

A026 OPC MMR INTERFACE HARDWARE SPECIFICATION DI-IPSC-81431A

A027 MMR TEST PLAN DI-NDTI-80566A

A028 MMR TEST PROCEDURE DI-NDTI-80603A

A029 MMR TEST REPORT DI-NDTI-80809B

A030 OPC CONFIGURED MMR FACTORY TEST REPORT DI-NDTI-80809B

A031 M-DEMO TEST PLAN DI-NDTI-80566A

A032 M-DEMO TEST PROCEDURE DI-NDTI-80603A

A033 M-DEMO TEST REPORT DI-NDTI-80809B

A034 INTEGRATION DATA PACKAGE DI-SESS-80776A

A035 ALIGNMENT DATA PACKAGE DI-SESS-80776A

A036 SHIPBOARD INSTALLATION DISCREPANCY REPORT DI-MISC-80508B

A037 SHIPBOARD INDUSTRIAL TEST PROCEDURES DI-QCIC-80206

A038 SHIPBOARD INDUSTRIAL TEST REPORT DI-NDTI-80809B

A039 SYSTEM SAFETY PROGRAM PLAN DI-SAFT-81626

A040 SYSTEM REQUIREMENTS HAZARD ANALISIS (SRHA) DI-SAFT-80101C

A041 SAFETY ASSESSMENT REPORT (SAR) DI-SAFT-80105C

A042 HEALTH HAZARD ASSESSMENT REPORT (HHAR) DI-SAFT-80106B

A043 SYSTEM SAFETY ASSESSMENT REPORT (SAR) DI-SAFT-80102C

A044 SUB-SYSTEM SAFETY HAZARD ANALYSIS (SSHA)

REPORT/SOFTWARE SSHA REPORT

DI-SAFT-80102C

A045 OPERATIONAL AND SUPPORT HEALTH ANALYSIS (O&SHA) REPORT

(HHAR)

DI-SAFT-81841

A046 RADIATION AND HAZARD CONTROL PROCEDURES DI-SAFT-81841

A047 MISHAP RISK ASSESSMENT REPORT (MRAR) DI-SAFT-81300B

A048 WSESRB PRESENTATION MATERIAL DI-ADMN-81373

A049 HAZARDOUS MATERIALS MANAGEMENT PROGRAM (HMMP) PLAN DI-MGMT-81397C

A050 HAZARDOUS MATERIALS MANAGEMENT PROGRAM (HMMR)

REPORT

DI-MGMT-81398C

A051 CONFIGURATION AUDIT SUMMARY REPORT AND CERTIFICATION DI-SESS-81022D

A052 MMR FIRST UNIT TEST PLAN DI-NDTI-80566A

A053 MMR FIRST UNIT TEST REPORT DI-NDTI-80809B

A054 RELIABILITY BLOCK DIAGRAMS AND

MAINTENANCE MODELS REPORT

DI-SESS-89416A

A055 TECHNICAL DATA PACKAGE (TDP) DI-SESS-80776A

A056 INTERIM OPERATIONAL SPARES DI-MISC-80508B

A057 RELIABILITY CENTERED MAINTENANCE ANALYSIS (RCMA) DI-ILSS-80111A

A058 LOGISTICS PRODUCT DATA SUMMARIES DI-SESS-81759

A059 FAILURE MODE EFFECTS, AND CRITICALITY ANALYSIS REPORT DI-ILSS-81495A

A060 FREQUENCY ALLOCATION DATA DI-MISC-80508B

3.0 REQUIREMENTS

3.1 General

3.1.1 For the purposes of this contract, an MMR System shall be defined as: All MMR software and firmware required to maintain, operate and/or control the OPC configured MMR, and all MMR System hardware.

MMR hardware includes: the MMR antenna, below deck equipment, and Identification, Friend or Foe (IFF) Antenna and Cabling, MMR interconnecting cabling and cooling/piping, hardware resulting from integration efforts, OPC MMR mounting hardware, and any special tools required for shipboard OPC MMR installation, maintenance, data recording, data reduction and data analysis. Each MMR delivered shall include technical manuals as defined in Section 3.4.5 of this SOW. Special tools are defined as any tool, equipment or software item made specifically for use on the MMR System. Common test equipment such as meters, sweep generators, network analyzers, etc., are not considered special tools/equipment.

3.1.2 The Contractor shall manufacture, test, and deliver OPC configured MMR Systems in accordance with this contract. OPC configured MMR Systems shall meet the requirements of the MMR and OPC Drawings and Specifications listed in Section 2.1 of this SOW and provided as Government Furnished Information (GFI) under Attachments J-S2, J-S3, J-S4 and J-03. Only MMR Systems that meet the approved product baseline and pass all testing shall be delivered to the Government. Quantities shall be in accordance with Section B of the contract.

3.1.3 All MMR Systems shall meet the performance and physical configuration requirements specified in the drawings and specifications listed in in Section 2.1 of this SOW and provided as Government Furnished Information (GFI) under Attachments J-S2, J-S3, J-S4 and J-03. The MMR shall not be constructed or repaired with counterfeit components. The Contractor shall meet the requirements using a MMR with added/updated/changed hardware and software approved during integration activities. The Contractor shall subject the MMR Systems to Environmental Stress Screening using MIL-HDBK-344A as guidance.

3.1.4 The Contractor shall provide all labor, equipment, parts, information, consumable materials, and facilities required to successfully complete the tasks defined in this SOW.

3.1.5 The Contractor shall adhere to deliveries in accordance with Section F of the contract.

3.1.6 Reserved for future use.

3.1.7 The Contractor shall generate, maintain and execute an MMR System Security Plan (SSP). The Contractor shall also provide an Operational Security Plan using Operation Security (OPSEC) Guide for Defense Contractors as guidance (CDRLs A001 and A002).

3.1.8 Reserved for future use.

3.2 Program Management (CLINs 0001, 0002, and (if exercised) Option CLINs 1002, 2002, 3002, and 4002)

3.2.1 The Contractor shall designate an English speaking Technical Program Manager (TPM) for this tasking.

The TPM shall have responsibility for planning, execution, control, and reporting all technical and scheduling aspects of the program to the Government technical team. The Contractor’s TPM shall be authorized to directly discuss technical and programmatic issues within the scope of this contract with the Government’s Project Manager (PM) and other Government representatives. Discussions and correspondence between the Government’s PM and the Contractor’s TPM shall be technical in nature.

Government technical personnel do not have any authority to change the terms of this contract. All contracting questions/discussions shall be directed to the Contracting Officer and/or his/her designated representative(s).

3.2.2 The Contractor shall generate a Contractor Work Breakdown Structure (CWBS). The CWBS shall be consistent with the Cost Assessment and Program Evaluation (CAPE) Office approved Cost and Software Data Reporting (CSDR) Plan (provided in section J), the CSDR Manual (DoD 5000.04-M-1), and MIL- STD-881C. The CWBS shall identify all tasks associated with this contract. The CWBS shall provide visibility into cost drivers and risk areas. The CWBS shall be updated by the Contractor to accommodate changes to the program. CWBS revisions shall require approval of the Government prior to implementation. (CDRL A003)

3.2.3 The Contractor shall generate and maintain an Integrated Master Schedule (IMS). The IMS shall identify all tasks that are required for MMR First Unit design, manufacturing and test completion, and the remaining MMR Production activities. The IMS shall use the CWBS structure for tracing all work to be performed. The IMS shall identify the critical path, all major program events, and program milestones.

The IMS shall document work at the lowest level of the CWBS. The Contractor shall quantify risk in hours, calendar days, or weeks of delay and provide durations for each IMS activity and event that meets the following criteria: (1) critical path tasks/activities, (2) near-critical path tasks/activities (as specified in the CDRL), (3) high risk tasks/activities in the program’s risk management plan. The schedule shall be submitted in conjunction with the Contractors’ Progress, Status, and Management Report. (CDRLs A004 and A005)

3.2.4 The Contractor shall conduct Quarterly Program Reviews (QPRs) during the manufacturing, integration, and test of the MMR. The Contractor shall also conduct meetings as required to resolve technical and/or schedule issues. The Contractor shall utilize online meeting tools to reduce travel expenses to the greatest extent possible. The Contractor shall provide meeting agendas for all meetings. The Contractor shall provide meeting minutes for each meeting conducted (CDRLs A006 and A007).

3.2.5 The Contractor shall identify risks and issues as they arise and present them to the Government. Risks shall have mitigation plans assigned and approved for execution by the Government. All problems/issues shall be tracked through completion/resolution and reported on via the Contractors’ Progress, Status, and

Management Report (CDRL A005). The Contractor’s risk management process shall meet the policy requirements addressed in PEOIWSINST 5000.8.

3.3 Logistics and Configuration Management (CLINs 0001, 0002, and (if exercised) Option CLINs 1002, 2002, 3002, and 4002)

3.3.1 The Contractor shall maintain a configuration control program that complies with SAE-EIA 649B, SAE

EIA-649-1, and the PEO IWS 2.0 Above Water Sensors Configuration Management Plan/Procedures (document numbers 2.0 CMP 002A and 2.0 CMP 002B).

3.3.2 The Contractor shall identify any errors found in the Government Furnished Information (GFI)

(Attachments J-S2, J-S3, J-S4 and J-03) provided in support of the MMR program. The Contractor shall use a GFI Deficiency Report to identify the required updates (CDRL A008).

3.3.3 The Contractor shall maintain the approved Product Baseline(s) for all OPC configured MMR Systems.

The Product Baseline shall be established upon successful completion of the OPC MMR First Unit testing, as specified in this SOW. The Contractor shall be responsible for ensuring each end item delivered to the Government conforms to the approved Product Baseline.

3.3.4 The Contractor shall maintain a Configuration Status Accounting System (CSAS) for the OPC configured

MMR that reports all part or other configuration item (CI) changes to the Government. The parts and/or CI changes shall contain supplementary provisioning technical documentation to allow the Government to maintain and update their provisioning data for the OPC configured MMR. Any parts changes which result in the need for software/firmware updates shall not impact the data rights/licensing agreements which were in place at the time of the software/firmware update (CDRLs A009 and A010).

3.3.5 The Contractor shall be responsible for all maintenance and calibration pertaining to repair equipment, tools, and test equipment used at the Contractor’s and/or subcontractor’s facilities.

3.3.6 The Contractor shall establish, implement, and maintain a Provisioning Program. The Contractor shall establish necessary procedures to assure that provisioning data is collected, tracked, and integrated into the Interactive Computer Aided Provisioning System – ICAPS Client Server (C/S). The Contractor shall develop and submit Provisioning Technical Data (PTD) for the MMR, and present the PTD status at each QPR. The Engineering Data for Provisioning (EDFP) shall be provided electronically. The EDFP shall be available for government review at all times during site visits to the Contractor’s and/or subcontractor’s facilities. The Contractor is not required to provide EDFP for MMR parts with a National Stock Number (NSN). If identical provisioning data has been submitted previously, the Contractor shall submit a Statement of Prior Submission which includes: Contract or purchase order number; Contract exhibit line item number; End Item/Component type or model (with reference number); Item Name; Manufacturer’s name and CAGE Code; Provisioning activity receiving the PTD and date prepared; NSN (if applicable);

Interchangeability information (i.e., electrical, mechanical, physical) (CDRLs A011, A012, and A013).

3.3.6.1 The Contractor shall provision the MMR utilizing the ICAPS Client Server (C/S) to compile the PTD. In preparation of the provisioning deliverables, the deliverables shall meet the requirements of SAE GEIA- STD-0007 and Logistics Support Analysis Report (LSAR) Data Requirements Form, Part II, and DD Form 1949-3. The Contractor shall use MIL-HDBK-502A, and MIL-HDBK-470A as guidance.

3.3.6.2 The Contractor shall create PTD and EDFP for any nonstandard item (i.e. equipment, component or part) obtained from any source that is unable to furnish PTD. A nonstandard item is defined for this SOW as any item that does not have a National Stock Number (NSN).

3.3.6.3 The Contractor shall provide PTD and EDFP for Commercial-Off-The-Shelf (COTS) items to the level of detail provided by the COTS item manufacturer.

3.3.6.4 The Contractor shall provide PTD and EDFP for any item which the Contractor manufactures or modifies.

3.3.6.5 The Contractor shall provide PTD and EDFP for any item that the Government has disapproved the

Statement of Prior Submission (SPS).

3.3.6.6 The Contractor shall provide PTD and EDFP for any unique or special test equipment.

3.3.6.7 The Contractor is to input the PTD provisioning data directly into the ICAPS Client Server (C/S). Access to

C/S requires a Common Access Card (CAC). The Government will also provide ICAPS training to the Contractor if required or requested by the Contractor.

3.3.6.8 The PTD will be base-lined upon establishment of the Product Baseline (CDRL A018).

3.3.6.9 The MMR Contractor shall host a Provisioning Guidance Conference and the Program Kickoff Meeting within 30 calendar days after contract award. The Contractor shall provide Provisioning Technical Data (PTD) to support provisioning planning. The MMR Contractor shall host a Provisioning Conference within 90 calendar days of the First Unit Test Readiness Review.

3.3.7 The Contractor shall develop and deliver a Reliability Block Diagram (RBD) of the MMR (CDRL A054).

The RBD shall be used by the government to develop on-board spare parts allocations based on a Reliability Based Sparing (RBS) model in order to meet the MMR Operational Availability requirements.

3.3.8 The Contractor shall have a process in place for validating OPC MMR System hardware and software updates. The Contractor shall identify COTS obsolescence management approaches for DMSMS that are to be supported by cost trade off analysis. The Contractor shall validate all hardware and/or software changes prior to implementing changes into the OPC MMR Systems.

3.3.8.1 The Contractor shall have a Diminishing Manufacturing Sources and Material Shortages (DMSMS) monitoring process and provide periodic reports Class II changes shall be reported to the Government as required and at each QPR. The Contractor shall provide recommendations and actionable plans to the Government for mitigating obsolescence and parts shortages for components and subcomponents of the MMR part of the) (CDRL A018) from SOW paragraph 3.4.3.2 below.

3.3.9 The Contractor shall provide Planned Maintenance System (PMS) and other maintenance data required to support the generation of Maintenance Instruction Pages (MIP), Maintenance Requirement Cards (MRC) and Class Support Maintenance Plan (CSMP) procedures.

3.3.10 The Contractor shall develop and deliver a Reliability Centered Maintenance Analysis (RCMA) of the

MMR (CDRL A057); the RCMA shall be used by the government to develop on-board preventive maintenance activities based on a Planned Maintenance System (PMS) model in order to meet the MMR Operational Availability requirements.

3.3.11 The Contractor shall provide Logistics Product Data Summaries to assist the government in the out-year sustainment planning (CDRL A058).

3.3.12 The Contractor shall provide a Failure Mode Effects and Criticality Analysis (FMECA) report (CDRL

A059).

3.4 Data (CLIN 0004)

3.4.1 Shipboard Installation Control Drawings (ICDs).

3.4.1.1 The Contractor shall deliver ICDs for OPC configured MMR System installation on the OPC ships.

Foundation requirements for the MMR elements shall include machining data so that the faying surfaces are flat, smooth and parallel to the appropriate reference plane and within tolerances specified to accomplish successful combat systems/battery alignments if applicable. The ICDs will be provided to the

OPC shipbuilder by the Government team upon completion. Therefore, the data right/markings on the ICDs shall not restrict the drawings from being distributed to and used by shipbuilders and/or Government Alteration and Installation Teams (AITs) (CDRL A014).

3.4.2 MMR Enhanced Data Rights (Option CLIN 0007).

3.4.2.1 For each item of Technical Data (TD), Computer Software (CS), and/or Computer Software

Documentation (CSD) that the Contractor asserts should be delivered with less than Government Purpose Rights (GPR) as defined in:

DFARS 252.227-7013 (MAR 2011) and/or

DFARS 252.227-7014 (MAR 2011)

and for which the Contractor is willing to sell to the Government greater rights than those identified in its list of asserted restrictions on the Government’s use, release, or disclosure of such item(s), as identified in:

Attachment J-08 – DFARS 252.227-7017 Identification and Assertion of Restrictions on the Government’s Use, Release, or Disclosure of Technical Data or Computer Software (herein referred to as 7017 list);

Attachment J-09 – DFARS 252.227-7028 Technical Data or Computer Software Previously Delivered to the Government (herein referred to as 7028 list); and

Attachment J-10 – Supplemental Information-Noncommercial Technical Data, Noncommercial Computer Software, Noncommercial Computer Software Documentation the Contractor shall identify those greater rights, and shall provide an Option price at which the Government may purchase such greater rights. It should be noted that if this option is exercised, the Contractor shall update Attachments J-08, J-09 and J-10, to account for modifications to the asserted restrictions previously identified. The Contractor shall remove or revise markings and legends consistent with the rights provided. The data to be furnished hereunder shall be prepared in accordance with CDRL A015.

3.4.2.2 The intent is for CDRL A015 to serve as an update to the data originally delivered under CDRL A055, if CLIN 0007 is exercised.

3.4.3 Recurring MMR Configuration Data

3.4.3.1 The Contractor shall provide a Data Accession List (DAL). The DAL shall list all drawings, documentation, other related data and computer software used by the Contractor to develop, test, field and maintain the MMR System. The DAL shall identify the Government’s Rights to the data, including Government Purpose Rights (GPR), Unlimited Rights (UR), Limited Rights (LR), Specially Negotiated License Rights (SNLR), and Restricted Rights (RR) (Restricted Rights shall be applicable to COTS software only). Re-submissions of this data shall be made after any OPC configured MMR changes are made after establishment of the baseline (CDRL A016).

3.4.3.2 The Contractor shall provide an As-Built Configuration (ABC) Bill of Material (BOM) List with the first

OPC configured MMR System. The Contractor shall provide an updated ABC-BOM list each time the configuration of the OPC configured MMR System changes. The updated ABC-BOM list shall identify which configuration items that have changed from previous deliveries. Updated ABC-BOM lists delivered shall be accompanied by a technical report identifying the impact of the changes made on system performance, system functionality, training, provisioning, and technical data and data rights (CDRLs A017 and A018).

3.4.4 Training Materials

3.4.4.1 The Contractor shall provide MMR operator and maintainer training material. The training material shall be delivered in electronic format (i.e., Microsoft Office ©, JAVA, html, and/or Adobe Acrobat ©).

3.4.4.2 The training material shall be delivered to allow the Government to provide the training material to Contractors to execute system training and shipboard maintenance training.

3.4.4.3 The training material shall guide the operator and maintainer through the application, operation, inspection, adjustment, troubleshooting, and repair of the equipment.

3.4.5 Technical Manuals

3.4.5.1 The Contractor shall provide MMR technical manuals. The MMR base system technical manual shall be delivered in hardcopy and electronic format. The manual shall contain all technical information on the assembly, installation, operation, parts, fault analysis, repair, and maintenance of the equipment (CDRL A020).

3.4.6 Basic Technical Data

3.4.6.1 The Contractor shall provide a technical data package. The data to be furnished hereunder shall be prepared in accordance with CDRL A055.

3.5 Interface Design and Development, MMR First Unit (CLIN 0001)

3.5.1 The Contractor shall provide a MMR System to accommodate the interfaces required to successfully interface the MMR with shipboard systems in accordance with MMR System Performance Specification (hereafter referred to as the SPEC) and Interface Requirements Specifications listed in in Section 2.1 of this SOW and provided as Government Furnished Information (GFI) under Attachments J-S2, J-S3, J-S4 and J- 03.

3.5.2 Interface Software Development

If software development is required to meet the MMR System requirements, the Contractor shall update, maintain, and execute its software development program in accordance with IEEE Std. 12207:2008 and ISO/IEC/IEEE 15289:2011. The Contractor shall update, maintain, deliver, and execute its Software Development Plan (SDP) (CDRL A021).

The Build Function descriptions in the Software Baseline in the SDP shall describe in detail the completion criteria that will be used by the Contractor to determine successful completion of that Build Function.

If the Contractor desires to make a change to any part of the Software Baseline after SDP approval by the Government, Government approval must be gained via the Configuration Management process (see Section

2.3 document numbers 2.0 CMP 002A and 2.0 CMP 002B).

3.5.2.1 The Contractor shall utilize software development metrics per the NAVSEA Technical Review Manual

(TRM) when establishing the software baseline for the base MMR modification software. The software development metrics shall include, at a minimum: Overall Software Event Status, Projected Delivered Lines of Code, Test Conduct, Requirements Verification Progress, Requirements & Design Maturity, Code Content (New, Modified and Reuse), Build Stability, Technical Performance Measures, Processor Utilization, Memory Utilization, Endurance Testing, Trouble Report (TR) History & Status, Defect History and Status, and Defect Containment.

3.5.2.2 As part of the interface software development task, the Contractor shall conduct reviews to address the following subparagraphs in accordance with the NAVSEA Technical Review Manual (TRM). The reviews shall focus on newly developed software and any changes to existing software used in the MMR. The reviews may be combined with quarterly QPRs. The reviews in this section shall be conducted sequentially. The Government will provide approval/disapproval to proceed based on the guidance provided in the NAVSEA TRM. All requirements for QPR conduct apply (conference agenda and conference minutes). If the Contractor has already developed the interface on previous efforts, the supporting data shall still be provided to support the software development requirements. The Contractor shall deliver interface design documents for developed interfaces (CDRL A022).

a. Software Specification Review IAW NAVSEA TRM (starting page C-63)

b. Software Preliminary Design Review IAW NAVSEA TRM (starting page C-78)

c. Software Critical Design Review IAW NAVSEA TRM (starting page C-93)

3.5.3 MMR Modification Software Testing

3.5.3.1 MMR modification software testing shall verify the requirements from documents generated during MMR software development and Government-provided IRSs are met. The Contractor shall plan for Government participation/witness of all aspects of testing.

3.5.3.2 The Contractor shall generate a MMR Modification Software Test Plan (CDRL A023).

3.5.3.3 The Contractor shall generate a MMR Modification Software Test Description that identifies the methods and provides procedures to be used to verify requirements compliance in accordance with the MMR Modification Software Test Plan. The MMR Modification Software Test Description shall include a traceability matrix depicting traceability from Build Function to each software requirement being verified

(CDRL A024).

3.5.3.4 The Contractor shall conduct MMR software tests and evaluations in accordance with the approved MMR

Modification Software Test Plan and MMR Modification Software Test Description.

3.5.3.5 The Contractor shall document the results of testing in MMR Modification Software Test Reports. The

Contractor shall include test results from all testing (including regression testing) as well as supporting documentation in the Base MMR Modification Software Test Reports (CDRL A025).

3.5.3.6 The Contractor shall make software test data, evaluation tool data (including simulation…