MT20240057.pdf

"General Decision Number: MT20250057 06/06/2025

Superseded General Decision Number: MT20240057

State: Montana

Construction Type: Building

Counties: Carter, Custer, Fallon, Garfield, Phillips, Powder River, Rosebud and Valley Counties in Montana.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.75 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2025. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $13.30 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on |

6/24/25, 2:25 PM SAM.gov https://sam.gov/wage-determination/MT20250057/3 1/10

| | that contract in 2025. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2025 1 03/14/2025 2 05/30/2025 3 06/06/2025

ASBE0082-002 08/01/2024

Rates Fringes

Heat and Frost Insulator.........$ 43.81 21.87

BOIL0011-002 01/01/2025

Rates Fringes

BOILERMAKER......................$ 38.75 32.31

BRMT0010-003 06/01/2020

CARTER, CUSTER, FALLON, GARFIELD, POWDER RIVER & ROSEBUD

COUNTIES

Rates Fringes

BRICKLAYER.......................$ 30.55 15.75

BRMT0012-001 06/01/2020

PHILLIPS AND VALLEY COUNTIES

Rates Fringes https://sam.gov/wage-determination/MT20250057/3 2/10

BRICKLAYER.......................$ 30.55 15.75

* CARP0082-012 06/01/2025

Rates Fringes

CARPENTER (Form Work Only).......$ 32.05 15.02

Zone Definition:

The hourly rate applicable to each project is determined by measuring the road miles over the shortest practical route from the County Courthouse of the following towns to the ceter of the job: Billings, Bozeman, Butte, Great Falls, Helena, Kalispell, Lewiston, Miles City, and Missoula

Zone 1: 0 to 30 miles - Base Rate Zone 2: 31 to 60 miles - $4.00 Zone 3: over 60 miles - $6.00

* CARP1607-007 06/01/2025

Rates Fringes

MILLWRIGHT.......................$ 46.21 23.50

Zone Definition:

The hourly rate applicable to each project is determined by measuring the road miles over the shortest practical route from the County Courthouse of the following towns to the ceter of the job: Billings, Bozeman, Butte, Great Falls, Helena, Kalispell, Lewiston, Miles City, and Missoula

Zone 1: 0 to 30 miles - Base Rate Zone 2: 31 to 60 miles - $4.00 Zone 3: over 60 miles - $6.00

* ELEC0233-006 06/01/2025

Phillips and Valley Counties

Rates Fringes

ELECTRICIAN......................$ 40.42 3.5%+16.93

ELEC0532-007 06/01/2024

https://sam.gov/wage-determination/MT20250057/3 3/10

Carter, Custer, Fallon, Garfield, Powder River & Rosebud Counties

Rates Fringes

ELECTRICIAN......................$ 41.92 5.5%+15.19

ELEV0019-005 01/01/2025

Rates Fringes

ELEVATOR MECHANIC................$ 67.61 38.435+a+b

FOOTNOTE:

a. Employer contributes 8% of the basic hourly rate for over 5 year's service and 6% of the basic hourly rate for 6 months to 5 years' of service as vacation paid credit.

b. Eight paid holidays: New Year's Day; Memorial Day;

Independence Day; Labor Day; Veteran's Day; Thanksgiving Day; Friday after Thanksgiving and Christmas Day

ENGI0400-003 05/01/2025

Rates Fringes

POWER EQUIPMENT OPERATOR:

(1) A-frame truck Crane.....$ 21.51 16.20

(4) Cranes 25-44 tons.......$ 38.00 16.20

(5) Cranes 45-74 tons.......$ 38.00 16.20

(6) Cranes 75 to 144 tons, whirley cranes..............$ 40.00 16.20

(7) Cranes, 150 tons to including 250 tons (add $1.00 for every 100 tons over 250 tons); Crane, Tower (all).................$ 42.00 16.20

ZONE DEFINITIONS FOR POWER EQUPMENT OPERATORS:

The zone hourly rates applicable to each project shall be determined by measuring the road miles over the shortest practical maintained route from the nearest County Court House of the following listed towns to the center of the job:

BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL,

MISSOULA

https://sam.gov/wage-determination/MT20250057/3 4/10

Zone 1: 0 to 30 miles - Base Pay Zone 2: 30 to 60 miles - Base Pay + $3.50 Zone 3: Over 60 miles - Base Pay + $5.50

IRON0732-014 06/01/2024

Rates Fringes

IRONWORKER, REINFORCING..........$ 36.83 25.30

PLUM0030-006 09/01/2024

Carter, Custer, Fallon, Garfield, Powder River, and Rosebud Counties

Rates Fringes

PIPEFITTER, Excludes HVAC Pipe Installation................$ 44.35 21.87 PLUMBER, Excludes HVAC Pipe Installation.....................$ 41.00 20.47

PLUM0041-009 07/01/2021

PHILLIPS & VALLEY COUNTIES

Rates Fringes

PLUMBER/PIPEFITTER (Excluding HVAC Pipe Installation)..........$ 36.35 16.00

SHEE0103-009 06/01/2022

Rates Fringes

SHEET METAL WORKER (HVAC Duct Installation Only)...............$ 33.00 20.17

* SUMT2011-033 01/04/2011

Rates Fringes

CARPENTER (Drywall Hanging Only)............................$ 22.69 0.00

CARPENTER, Excludes Drywall https://sam.gov/wage-determination/MT20250057/3 5/10

Hanging, and Form Work...........$ 16.70 ** 2.31

CEMENT MASON/CONCRETE FINISHER...$ 18.27 1.50

IRONWORKER, STRUCTURAL...........$ 20.45 12.76

LABORER: Common or General......$ 14.47 ** 3.11

LABORER: Mason Tender - Brick...$ 18.37 5.94

OPERATOR: Excavator.............$ 22.98 5.57

OPERATOR: Forklift..............$ 21.44 8.05

PAINTER: Brush, Roller and Spray............................$ 19.18 0.00

PLUMBER (HVAC Pipe Installation)....................$ 25.75 10.87

ROOFER...........................$ 17.36 ** 3.83

TRUCK DRIVER: Dump Truck........$ 18.88 4.66

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

** Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.75) or 13658 ($13.30). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is https://sam.gov/wage-determination/MT20250057/3 6/10 like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).

The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than ""SU"", ""UAVG"", ?SA?, or ?SC? denotes that a union rate was prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.

0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.

Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for https://sam.gov/wage-determination/MT20250057/3 7/10 those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:

UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.

The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The ""SU"" identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.

?SU? wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The ""SA"" identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.

The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the ?SA? identifier took effect under state law in the state from which the rates were adopted.

https://sam.gov/wage-determination/MT20250057/3 8/10

WAGE DETERMINATION APPEALS PROCESS

1) Has there been an initial decision in the matter? This can be:

a) a survey underlying a wage determination

b) an existing published wage determination

c) an initial WHD letter setting forth a position on a wage determination matter

d) an initial conformance (additional classification and rate) determination

On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:

Branch of Wage Surveys Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.

Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 https://sam.gov/wage-determination/MT20250057/3 9/10

The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210.

END OF GENERAL DECISION"

https://sam.gov/wage-determination/MT20250057/3 10/10