MT1441-18_SOLICITATION_DOCUEMENT_STEEL.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

6200008719 119

MT1441-18 01/5/2018

570-547-1990 X4669 01/31/2018

2:00 PM EST

TIFFANI BALESTRINI, CONTRACT SPECIALIST

UNICOR

400 FIRST STREET

WASHINGTON DC, 20534

VARIOUS LOCATIONS SEE SOLICITATION FOR SPECIFIC

DELIVERY LOCATIONS

UNICOR FEDERAL PRISON INDUSTRIES

2 MILES NORTH OF ALLENWOOD

ALLENWOOD, PA 17810

UNICOR

PO BOX 4000

LEXINGTON KY 27509-4000

1-800-827-3168

SEE SECTION B

X X

X 2

Terms of delivery: DST

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00001 AHW6582 75 EA 5000041375

ALUM-DIAM-PLT,GRADE-3003,H22,4X8X1/8"T

SPECIFICATIONS:

THIS IS ALUMINUM DIAMOND PLATE SHEET METAL

MATERIAL:

Aluminum Alloy

Must Meet ASTM-H22 Standards

Grade 3003

WIDTH: 4 Feet

LENGTH: 8 Feet

THICKNESS: .125 Inches

GAUGE: 11

LAST BSBM DATA TEXT REVISION 7-20-12

00002 ANS0013 1,750 EA 5000041375

1"X1"X3/16"TX18'L,BFSF,ASTM-A36

STRUCTURAL-ANGLE-STEEL,SPEC.NO.

ASTM-A-36.HOT-ROLLED, blasted finish to sspc-7 to sspc-5 surface finish.

Coated with geo-guard 4021.

.LENGTH-TOLERANCE:1/16".

FREE-FROM-RUST,SCALE,BURRS-AND-SHARP

EDGES.BANDED-IN-LIFTS-NOT-TO-EXCEED

5000-LBS.WITH-4'X4'

LENGTHWISE-HARDWOOD-SKIDS-FOR

FORKLIFT-UNLOADING-FROM-SIDE-OF-TRUCK

DJU6200008719 PAGE 2 OF 119

Request For Quote

SUPPLIES OR SERVICES AND PRICES/COSTS

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00003 ANS0016 3,000 EA 5000041375

1"X1"X1/8"TX18'L,BFSF*

REINFORCEMENT,HEAVY,ANGLE BAR (STRUCTURAL).

DIMENSION: 1in.WIDTH X 1in.HEIGHT X 1/8in. THICKNESS X 18ft.LENGTH.

UNICOR PART NO: ANS0016

UNICOR DRAWING NO: ANS0016

MATERIAL:ASTM:A 36/A 36M-08,A6/A 6M-08.(L) SHAPE (EQUAL

LEGS),HRPO,STEEL.

FINISH: blasted finish to sspc-7 to sspc-5 surface finish. Coated with geo-guard 4021.

FREE FROM RUST,SCALE,BURRS AND

SHARP EDGES.

TOLERANCES: THICKNESS+.010in.,ALL OTHER DIMS+1/32in.

UNLESS OTHERWISE SPECIFIED.

SHIPMENT:SECURED LIFTS, STACK PILED (NOT TO EXCEED

5000 LB), PACKAGED ON CROSSWISE SKIDS, AND ACCESSIBLE

FOR FORKLIFT UNLOADING FROM SIDE OF TRUCK.

00004 ANS0017 50,000 EA 5000041375

1"X1"X1/8"TX35-7/32"L,HR

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00005 ANS0045 2,000 EA 5000041375

2-1/2X2-1/2,3/16"TX144"L,BFSF,ASTM-A36

OVERALL LENGTH TOLERANCE: +1/2", -0"

SPECIFICATIONS: Steel angle, Hot-formed, mild steel, low carbon, in accordance with ASTM A36, blasted finish to sspc-7 to sspc-5 surface finish.,coated with geo-gaurd 4021. free from burrs and sharp edges.

PACKAGING AND MARKING: Angle to be banded securely into bundles of equal quantity.

Maximum bundle weight to be 2,000 lbs.

Each bundle to be tagged as to material size, weight, UNICOR purchase order number, stock number (ANS0045), and date Angle must be shipped in a manner allowing for easy unloading at destination by forklift.

DJU6200008719 PAGE 3 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00006 ANS0047 30 EA 5000041375

STANDARD,C-CHANNEL,10GA,2"X1"X240"L

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00007 ANS0049 1,500 EA 5000041375

2"X1-1/2"X3/16"TX10'L,A36-7

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00008 ANS0079 35 EA 5000041375

1"X1"X1/8"TX10'L,BFSF

ANGLE, STEEL, PER ASTM A36

SIZE: 1" x 1" x 1/8" x 10' LENGTH, +1"/-0"

SPECIFICATIONS: Steel angle, hot-formed, mild steel, low carbon, in accordance with ASTM A36, blasted finish to sspc-7 to sspc-5 surface finish.Coated with geo-guard 4021, free from burrs and sharp edges.

U/O LOCKEERS.

PACKAGING AND MARKING: Angle to be banded securely into bundles of equal quantity.

Maximum bundle weight to be 2,000 lbs.

Each bundle to be tagged as to material size, weight, UNICOR purchase order number, stock number (ANS0079), and date. Weight of angle is .80 lbs. per

ft. Angle must be shipped in a manner allowing for easy unloading at destination by forklift.

DJU6200008719 PAGE 4 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00009 ANS0080 14,000.000 FT 5000041375

2"X2"X3/16"TX10'L,BFSF

ANGLE, STEEL, ASTM A36, H.R.P.O.

SIZE: 2" x 2" x 3/16" x 10' LENGTH

OVERALL LENGTH TOLERANCE: +1/2", -0"

SPECIFICATIONS: Angle to be in accordance with ASTM A36. Angle, Steel, Carbon, Structural, Grade A. Angle must be straight and free of rust and scale and without physical damage as it is used in the production of metal fabricated parts which are to be painted and any surface defects will be cause for rejection. Therefore, the angle

MUST BE blasted finish to sspc-7 to sspc-5 surface finish.

Coated with geo-guard 4021

. Angle must also be cut square.

PACKAGING AND MARKING: Angle to be securely banded into bundles of exactly

120 pieces each. Each bundle weight will be 2,928 lbs. (Based on weight of

2.44 lbs. per ft.) Each bundle to be tagged as to material dimensions, net weight, UNICOR purchase order number, date and stock number (ANS0080). Angle must be shipped in a manner allowing for easy unloading by forklift at destination. Any deviations from these requirements will be cause for rejection of entire load without unloading.

DJU6200008719 PAGE 5 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00010 ANS0087 450,000 EA 5000041375

1"X1"X1/8"X41-3/32"L,BFSF

REINFORCEMENT,HEAVY,ANGLE BAR (STRUCTURAL).

DIMENSION: 1"WIDTH X 1"HEIGHT X 1/8" THICKNESS X

41-3/32"LENGTH.

UNICOR PART NO: ANS0087

UNICOR DRAWING NO: ANS0087

MATERIAL:ASTM:A 36/A 36M-08,A6/A 6M-08."L" SHAPE (EQUAL

LEGS),HRPO,STEEL.

FINISH: , blasted finish to sspc-7 to sspc-5 surface finish. Coated with geo-guard 4021.

FREE FROM RUST,SCALE,BURRS AND

SHARP EDGES.

TOLERANCES: THICKNESS+.010",ALL OTHER DIMS+1/32"

UNLESS OTHERWISE SPECIFIED.

SHIPMENT:SECURED LIFTS, STACK PILED (NOT TO EXCEED

5000 LB), PACKAGED ON CROSSWISE SKIDS, AND ACCESSIBLE

FOR FORKLIFT UNLOADING FROM SIDE OF TRUCK

00011 ANS0088 27,500 EA 5000041375

1"X1"X1/8"X47-7/32"L,BFSF*

REINFORCEMENT,HEAVY,ANGLE BAR (STRUCTURAL).

DIMENSION: 1"WIDTH X 1"HEIGHT X 1/8" THICKNESS X

47-7/32"LENGTH.

UNICOR PART NO: ANS0088

UNICOR DRAWING NO: ANS0088

MATERIAL:ASTM:A 36/A 36M-08,A6/A 6M-08."L" SHAPE (EQUAL

LEGS),HRPO,STEEL.

FINISH: , blasted finish to sspc-7 to sspc-5 surface finish. Coated with geo-guard 4021.

FREE FROM RUST,SCALE,BURRS AND

SHARP EDGES.

TOLERANCES: THICKNESS+.010",ALL OTHER DIMS+1/32"

UNLESS OTHERWISE SPECIFIED.

SHIPMENT:SECURED LIFTS, STACK PILED (NOT TO EXCEED

5000 LB), PACKAGED ON CROSSWISE SKIDS, AND ACCESSIBLE

FOR FORKLIFT UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 6 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00012 ANS0106 35 EA 5000041375

3"X2"X1/4"TX25-15/16"L,ASTM,A-36

ASTM A36, COMMERCIAL QUALITY,

LENGTH TOLERANCE +/-1/16". HRCQ

U/O VEHICLE RACK

PACKAGING AND MARKING: ANGLE TO BE

SECURELY BANDED INTO BUNDLES OF EQUAL

QUANITY NOT TO EXCEED A MAXIMUM WEIGHT

OF 4000 LBS. EACH BUNDLE MUST BE TAGGED

WITH THE QUANTITY, WEIGHT, MATERIAL EACH

DIMENSIONS, UNICOR PURCHASE ORDER

NUMBER, DATE OF PACK AND STOCK NUMBER

ANS-0106. ANGLE MUST BE SHIPPED IN A

MANNER ALLOWING FOR EASY UNLOADING BY

FORKLIFT AT DESTINATION. ANY DEVIATIONS

FROM THESE REQUIREMENTS WILL BE CAUSE

FOR REJECTION OF ENTIRE LOAD WITHOUT

UNLOADING.

00013 ANS0113 15,000 EA 5000041375

3"X5"X3/8"TX120"L,ASTM-A36

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00014 ANS0118 225 EA 5000041375

1.50X1.50X.188X20'L,STRUCTURAL-ANGLE

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00015 ANS0156 400 EA 5000041375

ANGLE,1-3/4"X1-3/4"X1/8"T-20'L-A36

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00016 ANS0172 100 EA 5000041375

C-CHANNEL,3/16"T,3"LEGS"X1O"WIDEX144"L

DJU6200008719 PAGE 7 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00017 ANS0318 5,000 EA 5000041375

3"X2"X3/8"TX120"L,ASTM-A36

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00018 ANS1137 60,000.000 FT 5000041375

STEEL-ASTM-A36-C-CHANNEL,C3X5#X20'

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00019 ANS1146 50 EA 5000041375

ANGLE,1.5"X1.5"X.125"X20FT,ASTM-A36*

HOT ROLLED CARBON STEEL ANGLE IN

ACCORDANCE WITH ASTM-A36

00020 BAS0019 500 EA 5000041375

1/8"TX1"WX18'L,HRCQ,ASTM-A1011

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00021 BAS0087 500.000 FT 5000041375

2"X3/8X10',STRAP,ASTM#836,HOT,ROLL,STEEL

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

DJU6200008719 PAGE 8 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00022 BAS0125 125 EA 5000041375

1/4"TX1"WX12'L,HRPO,ASTM-A108,HOT-*

ROLLED, PICKLED AND OILED FLATS IN

ACCORD WITH ASTM A-575(LATEST REV) GRADE

M1008 OR M1010 OR AS ALTERNATE COLD

FINISHED IN ACCORD WITH ASTM A-108

(LATEST REV) GRADE 1008 OR 1010 TO BE

PACKAGED AND MARKED IAW ASTM A-700

(LATEST REV), SECTION 6, FIG.#2. MILL

CERTIFICATION REQUIRED Q.C. INSPECTION

REQUIRED

UNICOR ITEM NUMBER: BAS0125

00023 BAS0188 2,000 EA 5000041375

3/16"TX2"WX20'L,BFSF,ASTM-A36

blasted finish to sspc-7 to sspc-5 surface finish. Coated with geo-guard

4021.

00024 BAS0200 25 EA 5000041375

1/4"X5"-STRIP-10'BAR-STOCK

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00025 BAS1157 3,500 EA 5000041375

1/8"TX3/4"X207"LHRCO,ASTM-A36

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

DJU6200008719 PAGE 9 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00026 BAS1173 1,750.000 FT 5000041375

ST,FL-STCK,HOT-ROLL,A36,2"X3GA,20'L

UNICOR PART NO: BAS1173

DESCRIPTION: ST,FL-STCK,HOT-ROLL,A36,2"X1/4"T,20'L*

SIZE: 2.00"W X 0.25"T X 20'L

MATERIAL: FLAT STOCK STEEL; ASTM-A36

DRAWING NO: UNICOR Production Print Number:

U/M: EA.

SPECIFICATIONS: LENGTH TOLERANCE: +1/4", CUT EDGE.

PACKAGING AND MARKING: Bundles not to exceed 3,000 pounds. Each bundle must be tagged as to material dimensions, weight, number of pieces, UNICOR stock number (BAS1173), purchase order number, and date.

Material must be shipped in a manner allowing for easy side unloading at destination by forklift.

INSPECTION AND ACCEPTANCE: Pieces must be free of surface defects. Pieces must arrive dry and corrosion free, having been protected from the elements en-route to be acceptable.

U/O:BOX*BIOHZDSP

00027 BKT5368 1,750 EA 5000041375

BRACKET,CANT-ARM,.50"TX11.00"LX5.00"W

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00028 COS0002 82,500.000 LB 5000041375

13GAX6-1/2"W",CRCQ,ASTM-A-366

DESCRIPTION: COIL STEEL

IN ACCORDANCE WITH ASTM-A-366

COMMERCIAL QUALITY COLD ROLLED STEEL

CERTIFICATE OF CONFORMANCE REQUIRED W/EACH DELIVERY

OILED IN LIFTS NOT TO EXCEED 5000 LBS. WITH 4"X4"

HARDWOOD SKIDS FOR FORKLIFT UNLOADING FROM SIDE OF

TRUCK.

TRMT SPECS:

COIL WEIGHT: MIN.=STD/MAX-5000LBS

COIL ID:16"-20"/COIL OD:45"

WIDTH TOLERANCE:+0/-1/64"

DJU6200008719 PAGE 10 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00029 COS0010 30,000.000 LB 5000041375

14GA,4.0"W,(+0/-.02)CRCQ,ASTM-A1008*

"14GA,4.0""W,(+0/-.02)CRCQ,ASTM-A1008

COIL STEEL, C.R.C.Q., 14GA, ASTM A1008

UNICOR PART NO: COS1236

SIZE: 14 GA X 4.0"" W (+0/- .02"")U/O: 1X1X4 STEEL

BRACKET (BRB0440).

SPECIFICATIONS: STEEL TO BE COLD ROLLED COMMERCIAL

QUALITY, CONFORMING TO ASTM A1008.

PACKAGING AND MARKING: COILS MUST NOT EXCEED 5000 LBS.

(EA.). MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING

FOR EASY UNLOADING AT DESTINATION BY FORKLIFT.

MATERIAL MUST BE PROTECTED FROM ELEMENTS IN ROUTE AND

ARRIVE FREE OF RUST AND CORROSION. ALL COILS TO BE

BANDED AND SECURED TO SKIDS INDEPENDENT OF EACH OTHER

REGARDLESS OF WEIGHT. FLATBED, SIDE UNLOADING

PREFERRED. ALL COILS TO BE BANDED AND SECURED TO SKIDS

INDEPENDENT OF EACH OTHER REGARDLESS OF WEIGHT. EACH

SKID SHALL BE TAGGED WITH: MATERIAL DIMENSIONS,

NET WEIGHT, UNICOR STOCK NUMBER (COS1236), PURCHASE

ORDER NUMBER AND DATE.

DJU6200008719 PAGE 11 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00030 COS0011 35,000.000 LB 5000041375

.054"T(+.006,-0)X3"W,CRCQ,ASTM-A1

DJU6200008719 PAGE 12 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00031 COS0105 650,000.000 LB 5000041375

14GAX4-1/2"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 14GA, ASTM A1008

SIZE: 14 GA X 4.500"" (+/- .008"")

U/O CHANNEL BRACING AND P.S.L. ECCENTRIC

PLATE

SPECIFICATIONS: STEEL TO BE COLD-ROLLED

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. OUTSIDE DIAMETER 60"" MAXIMUM;

INSIDE DIAMETER 15-1/2""- 21-1/2"".

COIL WEIGHT 3,000 LBS. MINIMUM - 5000

LBS MAXIMUIM.

YIELD 25 TO 35 KSI

TENSILE 40 TO 50 KSI

PACKAGING / HANDLING: MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

FLATBED, SIDE UNLOADING PREFERRED.

EACH SKID SHALL BE TAGGED WITH MATERIAL

DEMENSIONS, NET WEIGHT, UNICOR STOCK

NUMBER (COS0105),PURCHASE ORDER NUMBER

AND DATE.

DJU6200008719 PAGE 13 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00032 COS0106 125,000.000 LB 5000041375

"COIL STEEL, C.R.C.Q., 14GA, ASTM A1008

SIZE: 14GA X 7.630"" (+/- .010"")

U/O 3.5"" STEP BEAM AND 5.5"" BEAM COVER.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. OD 60"" MAX; ID 15-1/2"" - 21-1/2"".

COIL WEIGHT 3,00 LBS. (MIN)- 5,000 LBS

MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING : MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

FLATBED, SIDE UNLOADING PREFERRED. ALL

COILS TO BE BANDED AND SECURED TO SKIDS

INDEPENDENT OF EACH OTHER REGARDLESS OF

WEIGHT. EACH SKID SHALL BE TAGGED WITH

MATERIAL DIMENSIONS, NET WEIGHT, UNICOR

STOCK NUMBER (COS0106), PURCHASE ORDER

NUMBER AND DATE.

"COIL STEEL, C.R.C.Q., 14GA, ASTM A1008

SIZE: 14GA X 7.630"" (+/- .010"")

U/O 3.5"" STEP BEAM AND 5.5"" BEAM COVER.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. OD 60"" MAX; ID 15-1/2"" - 21-1/2"".

COIL WEIGHT 3,00 LBS. (MIN)- 5,000 LBS

MAXIMUM.

DJU6200008719 PAGE 14 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING : MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

FLATBED, SIDE UNLOADING PREFERRED. ALL

COILS TO BE BANDED AND SECURED TO SKIDS

INDEPENDENT OF EACH OTHER REGARDLESS OF

WEIGHT. EACH SKID SHALL BE TAGGED WITH

MATERIAL DIMENSIONS, NET WEIGHT, UNICOR

STOCK NUMBER (COS0106), PURCHASE ORDER

NUMBER AND DATE.

14GAX7.630"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 14GA, ASTM A1008

SIZE: 14GA X 7.630"" (+/- .010"")

U/O 3.5"" STEP BEAM AND 5.5"" BEAM COVER.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. OD 60"" MAX; ID 15-1/2"" - 21-1/2"".

COIL WEIGHT 3,00 LBS. (MIN)- 5,000 LBS

MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING : MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

FLATBED, SIDE UNLOADING PREFERRED. ALL

COILS TO BE BANDED AND SECURED TO SKIDS

INDEPENDENT OF EACH OTHER REGARDLESS OF

WEIGHT. EACH SKID SHALL BE TAGGED WITH

MATERIAL DIMENSIONS, NET WEIGHT, UNICOR

STOCK NUMBER (COS0106), PURCHASE ORDER

NUMBER AND DATE.

DJU6200008719 PAGE 15 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

DJU6200008719 PAGE 16 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00033 COS0108 89,000.000 LB 5000041375

14GAX5.630"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q.,14GA,ASTM A1008

SIZE: 14 GA X 5.630"" (+/- .008"")

U/O 3.5"" COVER FOR BEAMS.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY,CONFORMING TO ASTM

A1008. ID 60"" MAX; ID 15-1/2""-21-1/2"".

COIL WEIGHT 3,00 LBS (MIN) -5,000 LBS

MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

NOTE: MATERIAL SHALL BE ROLLED ONTO THE

TAKE-UP REEL SO THAT THE SLIT EDGE IS TO

THE INSIDE OF THE COIL (BURR SIDE DOWN)

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

Each skid shall be tagged with material dimensions, net weight, UNICOR stock number (COS0108), purchase order number and date.

DJU6200008719 PAGE 17 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00034 COS0109 1,210,000.000 LB 5000041375

12GAX10.51"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 12GA, ASTM A1008

SIZE: 12 GA X 10.510"" (+/-.016""A)

U/O POST/UPRIGHT / POST,FRAME,CANTILEVER

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. OD 60"" MAX; ID 15-1/2"" - 21-1/2"".

COIL WEIGHT 3,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING/ MARKING: MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

FLATBED, SIDE UNLOADING PREFERRED.

EACH SKID SHALL BE TAGGED WITH MATERIAL

DIMENSIONS, NET WEIGHT, UNICOR STOCK

NUMBER (COS0109), PURCHASE ORDER NUMBER

AND DATE.

DJU6200008719 PAGE 18 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00035 COS0110 1,480,000.000 LB 5000041375

12GAX9.640"W,CRCQ,ASTM-A1008

"12GAX9.640""W,CRCQ,ASTM-A1008

COIL STEEL, C.R.C.Q.,12GA, ASTM A1008

SIZE: 12 GA X 9.640"" (+/-.016"")

U/O 5.5"" STEP BEAM

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERICAL QUALITY, CONFORMING TO ASTM

A1008. OD 60"" MAX; ID 15-1/2"" - 21-1/2.

COIL WEIGHT 3,000 LBS (MIN) - 5,000 LBS

MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred. All coils to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with material dimensions, net weight, UNICOR stock number (COS0110), purchase order number and date.

DJU6200008719 PAGE 19 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00036 COS0111 675,000.000 LB 5000041375

12GAX8.640"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 12GA, ASTM A1008

SIZE: 12 GA X 8.640"" (+/- .016"")

U/O 4.5"" STEP BEAM, 3-1/2"" RIGID CASTER

FRAME / 3-1/2"" AND 4"" SWIVEL CASTER

FORK.

SPECIFICATIONS: STEEL TO BE

COLD-ROLLED, COMMERCIAL QUALITY,

CONFORMING TO ASTM A1008. OD 60"" MAX;

ID 15-1/2"" - 21-1/2"". COIL WEIGHT

3,000 LBS (MIN) - 5,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

All coils to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with MATERIAL DIMENSIONS, NET

WEIGHT, UNICOR STOCK NUMBER (COS0111),

PURCHASE ORDER NUMBER and DATE.

DJU6200008719 PAGE 20 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00037 COS0112 2,910,000.000 LB 5000041375

12GAX7.640"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 12GA, ASTM A1008

SIZE: 12 GA X 7.640"" (+/- .016"")

U/O CROSSBAR-HEAVY DUTY, 3.5"" STEP BEAM,

5.5"" COVER BEAM, ROW SPACER, AND WALL

MOUNT BRACKET.

SPECIFICATIONS: STEEL TO BE

COLD-ROLLED, COMMERCIAL QUALITY,

CONFORMING TO ASTM A1008. OD 60"" MAX;

ID 15-1/2"" - 21-1/2"". COIL WEIGHT

3,000 LBS (MIN) - 5,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

All coils to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with MATERIAL DIMENSIONS, NET

WEIGHT, UNICOR STOCK NUMBER (COS0112),

PURCHASE ORDER NUMBER and DATE.

DJU6200008719 PAGE 21 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00038 COS0113 1,120,000.000 LB 5000041375

12GAX6.630"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q., 12GA, ASTM A1008

SIZE: 12 GA X 6.630"" (+/- .016"")

U/O 4.5"" COVER FOR BEAMS, AND 4"" RIGID.

CASTER FRAME.

SPECIFICATIONS: STEEL TO BE

COLD-ROLLED, COMMERCIAL QUALITY,

CONFORMING TO ASTM A1008. OD 6O"" MAX;

ID 15-1/2"" - 21-1/2"". COIL WEIGHT

3,000 LBS (MIN) - 5,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destination by forklift.

Flatbed, side unloading preferred.

All COILS to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with MATERIAL DIMENSIONS, NET

WEIGHT. UNICOR STOCK NUMBER (COS0113),

purchase order number and date.

DJU6200008719 PAGE 22 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00039 COS0114 425,000.000 LB 5000041375

12GAX5.530"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q.,12GA, ASTM A1008

SIZE: 12GA X 5.530"" (+/- .10"")

U/O 3.5"" COVER FOR BEAMS.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008. ID 60"" MAX; ID 15-1/2"" - 21-1/2"".

COIL WEIGHT 3,000 LBS (MIN) - 5,000 LBS

MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

All coils to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with material dimensions, net weight, UNICOR stock number (COS0114), purchase order number and date.

DJU6200008719 PAGE 23 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00040 COS0115 305,000.000 LB 5000041375

"10GAX5-15/16""W,CRCQ,ASTM-A1008

10GAX5-15/16"W,CRCQ,ASTM-A1008

COIL STEEL, CR

SIZED: 10 GA X 5-15/16"" (+/- .010"")

U/O CANTILEVER END BRACKET,MALE BED

LOCK, AND BEAM END BRACKET.

SPECIFICATIONS: STEEL TO COLD-ROLLED,

COMMERCIAL QUALITY, MATTE FINISH,

CONFORMING TO ASTM A1008. COIL SHALL

HAVE 60"" OD (MAX) AND 20"" ID (MAX).

COIL WEIGHT SHALL NOT EXCEED 5,000 LBS.

MINIMUM WEIGHT IF 3,000 LBS. MATERIAL

MUST BE FREE IF SURFACE DEFECTS WHICH

WOULD AFFECT APPEARANCE. END PRODUCT IS

A PAINTED METAL FURNITURE COMPONENT.

PACKAGING / MARKING: Each skid shall be tagged with UNICOR STOCK NUMBER

(COS0115), PURCHASE ORDER

NUMBER, MATERIAL DIMENSIONS, NET WEIGHT

and DATE. maximum skid weight 10,000 lbs. steel must be shipped in a manner to allow for easy unloading at destination by forklift. flatbed, side unloading prefered.

DJU6200008719 PAGE 24 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00041 COS0124 7,500.000 LB 5000041375

14GAX10.51"W,CRCQ,ASTM-A1008

"COIL STEEL, C.R.C.Q.,14GA,ASTM A1008

SIZE: 174GA X 10.510"" (+/- .010"")

U/O UPRIGHT POST.

SPECIFICATIONS: STEEL TO BE COLD-ROLLED,

COMMERCIAL QUALITY, CONFORMING TO ASTM

A1008 ID 60"" MAX; ID 15-1/2"". COIL

WEIGHT 3,000 LBS (MIN) - 5,000 LBS MAX.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

All coils to be banded and secured to skids independent of each other regardless of weight. Each skid shall be tagged with material dimensions, net weight, UNICOR stock number (COS0124), purchase order number and date.

DJU6200008719 PAGE 25 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00042 COS0125 60,000.000 LB 5000041375

.098"TX4.570"W,HR,GALV,ASTM-A653,OILED

".098""TX4.570""W,HR,GALV,ASTM-A653,OILED

COIL STEEL ,COLD ROLLED,GALVINIZED,PER

ASTM A653.

SIZE: .098Z"" X 4.570Z"" W (+/-.016"")

U/O 1-1/2"" X 12GA. SLOTTED ANGLE

CERTIFICATE OF CONFORMANCE WITH TEST

RESULTS REQUIRED.

SPECIFICATION: COIL STEEL TO BE COLL-

ROLLED COIL, HALF HARD NO. 2 TEMPER

CONFORMING TO ASTM A653, STRUCTURAL

(PHYSICAL) QUANITY, MIDIFIED TO 60,000

LBS MINIMIUM YIELD, GRADE D, COATING

DESIGNATIO G90, MINIMIZED SPANGLE,

CHEMINICALLY TREATED.

COIL SIZE SHALL BE 50"" TO 60"" ID X 16""

TO 20"" ID.

PACKAGING / MARKING: Material must be shipped in a manner allowing for easy unloading at destinatin by forklift.

Flatbed, side unloading preferred.

All coils to be banded and secured to skids independent of each other regardless of weight. Maximum skid weight shall be no more than 5,000 lbs.

Each skid shall be tagged with material dimensions, net weight, UNICOR stock number (COS0125), purchase order number and date.

DJU6200008719 PAGE 26 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00043 COS0130 550,000.000 LB 5000041375

14GAX3.31"W,CRCQ,ASTM-A1008

UNICOR PART NO:COS0130

DESCRIPTION:14GAX3.31""W,CRCQ,ASTM-A1008

SIZE:3.31""WX14GA.

TOLERENCE:+0.00-0.06

SPECIFICATIONS:COLD ROLLED COMMERCIAL QUALITY. MUST

CONFORM TO ASTM A1008. MILL CERTIFICATION REQUIRED.

PACKAGING AND MARKING:COILS MUST NOT EXCEED 5000 LBS.(EA)

MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT. MATERIAL MUST BE

PROTECTED FROM ELEMENTS IN ROUTE AND ARRIVE FREE OF RUST

AND CORROSION. ALL COILS TO BE BANDED AND SECURED TO

SKIDS INDEPENDENT OF EACH OTHER REGARDLESS OF WEIGHT.

FLATBED,SIDE UINLOADING PREFERRED. EACH SKID SHALL BE

TAGGED WITH:MATERAIL DIMENSIONS,NET WEIGHT,UNICOR STOCK

NUMBER(COS0130),PURCHASE ORDER NUMBER AND DATE.

U/M:LBS.

P/N:

U/O:CPCV1432,CPCV1462

DJU6200008719 PAGE 27 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00044 COS0131 660,000.000 LB 5000041375

14GAX4.82"W,CRCQ,ASTM-A1008

"14GAX4.82""W,CRCQ,ASTM-A1008

UNICOR PART NO:COS0131

DESCRIPTION:14GAX4.82""W,CRCQ,ASTM-A1008

SIZE:4.82""WX14GA.

TOLERENCE:+0.00-0.06

SPECIFICATIONS:COLD ROLLED COMMERCIAL QUALITY. MUST

CONFORM TO ASTM A1008.MILL CERTIFICATION REQUIRED.

PACKAGING AND MARKING:COILS MUST NOT EXCEED 5000 LBS.(EA)

MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT. MATERIAL MUST BE

PROTECTED FROM ELEMENTS IN ROUTE AND ARRIVE FREE OF RUST

AND CORROSION. ALL COILS TO BE BANDED AND SECURED TO

SKIDS INDEPENDENT OF EACH OTHER REGARDLESS OF WEIGHT.

FLATBED,SIDE UINLOADING PREFERRED. EACH SKID SHALL BE

TAGGED WITH:MATERAIL DIMENSIONS,NET WEIGHT,UNICOR STOCK

NUMBER(COS0131),PURCHASE ORDER NUMBER AND DATE.

U/M:LBS.

P/N:

U/O:CPBM1432,CPBM1462

DJU6200008719 PAGE 28 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00045 COS0237 30,000.000 LB 5000041375

.054"T(+.006,-0)X3.5"W,CRCQ,ASTM-A1008

".054""T(+.006,-0)X3.5""W,CRCQ,ASTM-A1008

17GAUGE C.R.C.Q. COIL STEEL.

UNICOR PART NO: COS0237

SIZE: 0.054""T(+0.006,-0)X 3.5""W

U/O:

SPECIFICATIONS: COLD ROLLED COMMERCIAL QUALITY.

MUST CONFORM TO ASTM A1008. MILL CERTIFICATION

REQUIRED. Q.C. INSPECTION REQUIRED.

PACKAGING AND MARKING: COILS MUST NOT EXCEED 5000 LBS.(EA.)

MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

MATERIAL MUST BE PROTECTED FROM ELEMENTS IN ROUTE AND

ARRIVE FREE OF RUST AND CORROSION. ALL COILS TO BE BANDED

AND SECURED TO SKIDS INDEPENDENT OF EACH OTHER REGARDLESS

OF WEAIGHT. FLATBED,SIDE UNLAODING PREFERRED. EACH SKID

SHALL BE TAGGED WITH: MATERIAL DIMENSIONS, NET WEIGHT,

UNICOR STOCK NUMBER (COS0237),

PURCHASE ORDER NUMBER AND DATE."

DJU6200008719 PAGE 29 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00046 COS1234 325,000.000 LB 5000041375

.125"TX1.76"W,HRPO,ASTM-A1011,GRADE33,*

COIL STEEL, H.R.P.O., .125""T, ASTM A1011

UNICOR PART NO: COS1234

SIZE: 0.125"T X 1.76" W (+- .014")

SPECIFICATIONS: STEEL TO BE HOT ROLLED PICKLED AND

OILED, CONFORMING TO ASTM A1011. OD 60"" MAX;

ID 15-1/2" - 21-1/2".

COIL WEIGHT 3,000 LBS (MIN) - 5,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING AND MARKING: COILS MUST NOT EXCEED 5000 LBS,

(EA.). MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING

FOR EASY UNLOADING AT DESTINATION BY FORKLIFT.

MATERIAL MUST BE PROTECTED FROM ELEMENTS INROUTE AND

ARRIVE FREE OF RUST AND CORROSION. FLATBED, SIDE

UNLOADING PREFERRED. ALL COILS TO BE BANDED AND

SECURED TO SKIDS INDEPENDENT OF EACH OTHER REGARDLESS

OF WEIGHT. EACH SKID SHALL BE TAGGED WITH: MATERIAL

DIMENSIONS, NET WEIGHT, UNICOR STOCK NUMBER (COS1234),

PURCHASE ORDER NUMBER AND DATE.

DJU6200008719 PAGE 30 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00047 COS1236 1,415,000.000 LB 5000041375

.125"TX2.51"W,HRPO,ASTM-A1011,GRADE33*

".125"TX2.51"W,HRPO,ASTM-A1011,GRADE33

MAXIMUM-YIELD-50KSI.

COIL STEEL, H.R.P.O., .125"T, ASTM A1011

UNICOR PART NO: COS1236

SIZE: 0.125"T X 2.51" W (+- .014")

U/O: ASRS*, SHV4*

SPECIFICATIONS: STEEL TO BE HOT ROLLED PICKLED AND

OILED, CONFORMING TO ASTM A1011. OD 60" MAX;

ID 15-1/2" - 21-1/2".

COIL WEIGHT 3,000 LBS (MIN) - 5,000 LBS MAXIMUM.

YIELD 25 TO 35 KSI.

TENSILE 40 TO 50 KSI.

PACKAGING AND MARKING: COILS MUST NOT EXCEED 5000 LBS,

(EA.). MATERIAL MUST BE SHIPPED IN A MANNER ALLOWING

FOR EASY UNLOADING AT DESTINATION BY FORKLIFT.

MATERIAL MUST BE PROTECTED FROM ELEMENTS INROUTE AND

ARRIVE FREE OF RUST AND CORROSION. FLATBED, SIDE

UNLOADING PREFERRED. ALL COILS TO BE BANDED AND

SECURED TO SKIDS INDEPENDENT OF EACH OTHER REGARDLESS

OF WEIGHT. EACH SKID SHALL BE TAGGED WITH: MATERIAL

DIMENSIONS, NET WEIGHT, UNICOR STOCK NUMBER (COS1236),

PURCHASE ORDER NUMBER AND DATE.

00048 CPARMS648 4,500 EA 5000041375

ARM,CANT,S-6-BEAM,48"L

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00049 CYLRACKBASERING 1,750 EA 5000041375

CYLINDER,RACK,BASE-RING

00050 CYLRCKGUIDERING 1,750 EA 5000041375

CYLINDER,RACK,GUIDE-RING

00051 FMP0219 6,000 EA 5000041375

BAR-GRATE,35-13/16"X3'6"SPAN

00052 FMP0220 50 EA 5000041375

BAR-GRATE,35-13/16"X4'3"SPAN

DJU6200008719 PAGE 31 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00053 FMP0221 1,000 EA 5000041375

BAR-GRATE,35-13/16"X5'SPAN

DJU6200008719 PAGE 32 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00054 FMP0233 1,700 EA 5000041375

BAR-GRATE,46.50"WX48"S,W19-2,1"X3/16"BAR

GRATING, BAR, STEEL, TYPE W-19-2.

GRATING, STEEL MANUFACTURED IN

ACCORDANCE WITH ANSI/NAAMM MBG 531-93

DATED FEBRUARY 14, 1994.

BAR GRATING IS TO BE UNPAINTED, PICKLED

AND OILED TO ENSURE MATERIAL IS FREE OF

RUST AND SCALE. THE RUST PREVENTATIVE

MUST BE COMPATIBLE WITH AND REMOVABLE

BY THE THREE STAGE PHOSPHATE WASH SYSTEM

USED BY FEDERAL PRISON INDUSTRIES.

CROSS BARS MUST BE FLUSH TO SLIGHTLY

RECESSED BELOW BEARING BARS AT ALL

CONTACT POINTS AND SHALL BE SPACED 2"

CENTER TO CENTER. BEARING BARS 1"X3/16"

THICK, SPACED 1-3/16" CENTER TO CENTER,

PLAIN SMOOTH SURFACE. EACH SECTION

SHALL BE BANDED ON BOTH ENDS WITH OVAL

SHAPED SLOTS (3/4" X 13/32") LOCATED

5-1/2" FROM EACH END OF THE BAND TO THE

CENTER OF THE SLOT. A TOTAL OF TWO (2)

SLOTS WILL BE INCLUDED IN EACH BAND BAR.

GRATING SECTIONS MUST BE CAPABLE OF

BEING ATTACHED END TO END WITH A 5/16"

DIAMETER BOLT. THE BAND BAR MUST BE

WELDED TO THE INSIDE TO PREVENT WELD

BUILD-UP ON THE OUTSIDE OF THE BAND

BARS. THE CROSS BARS MUST BE TRIMMED AS

CLOSE AS POSSIBLE.

SECTION TOLERANCES:

WIDTH: +/ -1/4"

LENGTH (SPAN): +0" / -1/8"

THE DIAGONAL CORNERS OF EACH SECTION SHOULD

MEASURE WITHIN 1/4"

THE SECTION SHOULD BE MADE OF ONE PIECE

MARKING AND PACKAGING:

MATERIAL IS TO BE SECURED IN BUNDLES

NOT TO EXCEED 5000 POUNDS. EACH BUNDLE

MUST BE MARKED WITH UNICOR STOCK NUMBER

(FMP0233), PURCHASE ORDER NUMBER, DATE,

NUMBER OF PIECES, AND MATERIAL SIZE.

MATERIAL IS TO BE SHIPPED IN A MANNER

THAT ALLOWS FOR EASY UNLOADING BY

FORKLIFT AT DESTINATION.

INSPECTION AND ACCEPTANCE:

DJU6200008719 PAGE 33 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

MATERIAL MUST BE PROTECTED FROM THE

ELEMENTS ENROUTE AND ARRIVE FREE OF

CORROSION AND MOISTURE TO BE ACCEPTABLE.

A CERTIFICATE OF CONFORMANCE SIGNED BY

AN AUTHORIZED OFFICIAL MUST ACCOMPANY

EACH SHIPMENT. REPLACEMENT OF REJECTED

MATERIAL WILL BE THE RESPONSIBILITY OF

THE VENDOR AT NO COST TO THE GOVERNMENT.

DJU6200008719 PAGE 34 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

DJU6200008719 PAGE 35 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00055 FMP0306 72,500.000 FT2 5000041375

BAR-GRATE,47.69"DX48"W,W19-2,1"X3/16"BAR

GRATING, BAR, STEEL, TYPE W-19-2.

GRATING, STEEL MANUFACTURED IN

ACCORDANCE WITH ANSI/NAAMM MBG 531-93

DATED FEBRUARY 14, 1994.

BAR GRATING IS TO BE UNPAINTED, PICKLED

AND OILED TO ENSURE MATERIAL IS FREE OF

RUST AND SCALE. THE RUST PREVENTATIVE

MUST BE COMPATIBLE WITH AND REMOVABLE

BY THE THREE STAGE PHOSPHATE WASH SYSTEM

USED BY FEDERAL PRISON INDUSTRIES.

CROSS BARS MUST BE FLUSH TO SLIGHTLY

RECESSED BELOW BEARING BARS AT ALL

CONTACT POINTS AND SHALL BE SPACED 2"

CENTER TO CENTER. BEARING BARS 1"X3/16"

THICK, SPACED 1-3/16" CENTER TO CENTER,

PLAIN SMOOTH SURFACE. EACH SECTION

SHALL BE BANDED ON BOTH ENDS WITH OVAL

SHAPED SLOTS (3/4" X 13/32") LOCATED

5-1/2" FROM EACH END OF THE BAND TO THE

CENTER OF THE SLOT. A TOTAL OF TWO (2)

SLOTS WILL BE INCLUDED IN EACH BAND BAR.

GRATING SECTIONS MUST BE CAPABLE OF

BEING ATTACHED END TO END WITH A 5/16"

DIAMETER BOLT. THE BAND BAR MUST BE

WELDED TO THE INSIDE TO PREVENT WELD

BUILD-UP ON THE OUTSIDE OF THE BAND

BARS. THE CROSS BARS MUST BE TRIMMED AS

CLOSE AS POSSIBLE.

SECTION TOLERANCES:

WIDTH: +0" / -1/4"

LENGTH (SPAN): +0" / -1/8"

THE DIAGONAL CORNERS OF EACH SECTION SHOULD

MEASURE WITHIN 1/4"

THE SECTION SHOULD BE MADE OF ONE PIECE

MARKING AND PACKAGING:

MATERIAL IS TO BE SECURED IN BUNDLES

NOT TO EXCEED 5000 POUNDS. EACH BUNDLE

MUST BE MARKED WITH UNICOR STOCK NUMBER

(FMP0306), PURCHASE ORDER NUMBER, DATE,

NUMBER OF PIECES, AND MATERIAL SIZE.

MATERIAL IS TO BE SHIPPED IN A MANNER

THAT ALLOWS FOR EASY UNLOADING BY

FORKLIFT AT DESTINATION.

INSPECTION AND ACCEPTANCE:

DJU6200008719 PAGE 36 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

MATERIAL MUST BE PROTECTED FROM THE

ELEMENTS ENROUTE AND ARRIVE FREE OF

CORROSION AND MOISTURE TO BE ACCEPTABLE.

A CERTIFICATE OF CONFORMANCE SIGNED BY

AN AUTHORIZED OFFICIAL MUST ACCOMPANY

EACH SHIPMENT. REPLACEMENT OF REJECTED

MATERIAL WILL BE THE RESPONSIBILITY OF

THE VENDOR AT NO COST TO THE GOVERNMENT.

DJU6200008719 PAGE 37 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00056 FMP6541 4,500 EA 5000041375

BAR-GRATE,59.56"DX48"W,W19-2,1"X3/16"BAR

GRATING, BAR, STEEL, TYPE W-19-2.

GRATING, STEEL MANUFACTURED IN

ACCORDANCE WITH ANSI/NAAMM MBG 531-93

DATED FEBRUARY 14, 1994.

BAR GRATING IS TO BE UNPAINTED, PICKLED

AND OILED TO ENSURE MATERIAL IS FREE OF

RUST AND SCALE. THE RUST PREVENTATIVE

MUST BE COMPATIBLE WITH AND REMOVABLE

BY THE THREE STAGE PHOSPHATE WASH SYSTEM

USED BY FEDERAL PRISON INDUSTRIES.

CROSS BARS MUST BE FLUSH TO SLIGHTLY

RECESSED BELOW BEARING BARS AT ALL

CONTACT POINTS AND SHALL BE SPACED 2"

CENTER TO CENTER. BEARING BARS 1"X3/16"

THICK, SPACED 1-3/16" CENTER TO CENTER,

PLAIN SMOOTH SURFACE. EACH SECTION

SHALL BE BANDED ON BOTH ENDS WITH OVAL

SHAPED SLOTS (3/4" X 13/32") LOCATED

5-1/2"" FROM EACH END OF THE BAND TO THE

CENTER OF THE SLOT. A TOTAL OF TWO (2)

SLOTS WILL BE INCLUDED IN EACH BAND BAR.

GRATING SECTIONS MUST BE CAPABLE OF

BEING ATTACHED END TO END WITH A 5/16"

DIAMETER BOLT. THE BAND BAR MUST BE

WELDED TO THE INSIDE TO PREVENT WELD

BUILD-UP ON THE OUTSIDE OF THE BAND

BARS. THE CROSS BARS MUST BE TRIMMED AS

CLOSE AS POSSIBLE.

SECTION TOLERANCES:

WIDTH: +0 / -1/4"

LENGTH (SPAN): +0 / -1/8"

THE DIAGONAL CORNERS OF EACH SECTION SHOULD

MEASURE WITHIN 1/4"

THE SECTION SHOULD BE MADE OF ONE PIECE

MARKING AND PACKAGING:

MATERIAL IS TO BE SECURED IN BUNDLES

NOT TO EXCEED 5000 POUNDS. EACH BUNDLE

MUST BE MARKED WITH UNICOR STOCK NUMBER

(FMP6541), PURCHASE ORDER NUMBER, DATE,

NUMBER OF PIECES, AND MATERIAL SIZE.

MATERIAL IS TO BE SHIPPED IN A MANNER

THAT ALLOWS FOR EASY UNLOADING BY

FORKLIFT AT DESTINATION.

INSPECTION AND ACCEPTANCE:

DJU6200008719 PAGE 38 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

MATERIAL MUST BE PROTECTED FROM THE

ELEMENTS ENROUTE AND ARRIVE FREE OF

CORROSION AND MOISTURE TO BE ACCEPTABLE.

A CERTIFICATE OF CONFORMANCE SIGNED BY

AN AUTHORIZED OFFICIAL MUST ACCOMPANY

EACH SHIPMENT. REPLACEMENT OF REJECTED

MATERIAL WILL BE THE RESPONSIBILITY OF

THE VENDOR AT NO COST TO THE GOVERNMENT.

00057 LKRMLEXPMET8X4 500 EA 5000041375

MLK-EXPD-METAL,4'X8'X3/4",9GA-FLAT

00058 PLT0069 850 EA 5000041375

PRK,END-RADIUS-17X21,BOTTOM-PLATE,LT/RT

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00059 PLT0169 1,750 EA 5000041375

PRK,END,RADIUS,BOTTOM,PLATE,LEFT/RIGHT

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

DJU6200008719 PAGE 39 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00060 RDA0001 100 EA 5000041375

ROD,ALUMINUM,1/2"DIA.X12'L

PER FS-QQ-A200,6061-T-651

MATERIAL TYPE:ROH

LOW-LEVEL CODE:003

U/M EA

00061 RDS0001 75 EA 5000041375

ROUND,5/16"DIAX20',CARBON-STEEL

FINISH: BLASTED FINISH TO

SSPC-7 TO SSPC-5 SURFACE FINISH.

COATED WITH GEO-GUARD 4021

00062 RDS0011 1,250 EA 5000041375

5/16"DIA-X-12'L(144"),CR.LOW-CARBON

ROD,STEEL,ROUND

PER ASTM-A108-81,GRADE 1018

U/M:EA

00063 RDS0086 125 EA 5000041375

1/4"DIAx144"L,CR,LOW-CARBON*

BAR, STEEL, ROUND, COLD ROLLED,

LOW-CARBON.

SIZE: 1/4" DIA X 144"L

IN ACCORDANCE WITH ASTM-A108

GRADE: 1018

SURFACE MUST BE SMOOTH AND FREE OF RUST

OR SCALE. MUST BE BUNDLED TO UNLOAD BY

OVERHEARD CRANE. EACH BUNDLE MUST BE

SECURED WITH 6 STEEL STRAPS. MILL

CERTIFICATION REQUIRED. Q.C. INSPECTION

REQUIRED.

USED FOR UP-AND-DOWN BOLT (A14-7062)

00064 SHA0139 20 EA 5000041375

ALUM,.050"TX48"W144"L,T6061,OOA-250/11

DJU6200008719 PAGE 40 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00065 SHS0006 150 EA 5000041375

16GAX36-5/8"WX73-1/2"L,CR,ASTM-A366

UNICOR PART NUMBER SHS0006

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.055" / MAX=.065"

PER SHEET WT: 47#LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 41 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00066 SHS0020 125 EA 5000041375

10GAX36"WX96"L,HRPO,ASTM-A-1011*

UNICOR PART NUMBER: SHS0020

DESCRIPTION: SHEET STEEL IN ACCORDANCE WITH

ASTM-A1011. HOT ROLLED,PICKLED AND OILED.

OILED (WATER SOLUBLE) AND PAPER WRAPPED.

MSDS FOR OIL IS REQUIRED. MILL CERTIFICATION

REQUIRED. QUALITY CONTROL INSPECTION REQUIRED.

THICKNESS: MIN=.126" /MAX=.142"

PER SHEET WT: 134-3/4#LBS.

AISI NO.1008-1010, #1 MATTE FINISH

WIDTH TOLERANCE: -0+5mm, CUT EDGE

4,000 pounds.

PACKAGING: EACH BUNDLE MUST BE

TAGGED TO PROVIDE THE MATERIAL DIMENSIONS,

WEIGHT,NUMBER OF SHEETS, UNICOR STOCK

NUMBER (SHS-0020),PURCHASE ORDER

NUMBER,AND DATE. MATERIAL MUST BE

SHIPPED IN A MANNER ALLOWING FOR EASY

UNLOADING AT DESTINATION BY FORKLIFT.

INSPECTION AND ACCEPTANCE: SHEET STEEL MUST

ARRIVE DRY AND CORROSION FREE. SHEET STEEL MUST BE PROTECTED FROM THE

ELEMENTS DURING TRANSIT.

00067 SHS0027 150 EA 5000041375

22GAX48"WX120"L,CRCQ,ASTM-A366

UNICOR PART NUMBER SHS0027

IN ACCORD WITH ASTM-A366 COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MILL CERTIFICATION

REQUIRED Q.C. INSPECTION REQUIRED

TRMT SPECS:

THICKNESS: MIN=.027" MAX=.033"

PER SHEET WT: 50#LBS.

AISI NO.1008-1010, #1 MATTE FINISH

WIDTH TOLERANCE: -0/+1/4"

DJU6200008719 PAGE 42 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00068 SHS0031 200 EA 5000041375

22GAX36"WX120"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0031

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.027"/MAX=.033"

PER SHEET WT: 37-1/2#LBS.

WIDTH TKOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: SHEETS MUST BE

FREE OF SURFACE DEFECTS. SHEET STEEL

MUST ARRIVE DRY AND CORROSION FREE,

HAVING BEEN PROTECTED FROM THE ELEMENTS

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

00069 SHS0032 1,500 EA 5000041375

22GAX47-1/2"WX87-1/2"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0032

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.027" / MAX=.033"

PER SHEET WT: 36#LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 43 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00070 SHS0036 200 EA 5000041375

20GAX42"WX88-1/2"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0036

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.033" / MAX=.039"

PER SHEET WT: 38-1/2LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

00071 SHS0038 200 EA 5000041375

20GAX42"WX76"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0038

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.033" / MAX=.039"

PER SHEET WT: 33-1/4LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 44 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00072 SHS0039 300 EA 5000041375

18GAX48"WX110"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0039

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.044" / MAX=.052"

PER SHEET WT: 73#LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 45 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00073 SHS0040 500 EA 5000041375

3/8"TX6"WX10'L,BFSF,ASTM,A-36

UNICOR PART #SHS0040 IN ACCORD

WITH ASTM A1011HOT ROLLED MUST BE blasted finish to sspc-7 to sspc-5 surface finish.

Coated with geo-guard 4021 (WATER SOLUBLE) AND PAPER

WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED THICKNESS

MIN 0.374" / MAX0.403" PER SHEET

WT: 153#LBS WIDTH TOLERANCE

+1/8" #1 MATTE (EXPOSED) MAX HARDNESS

ROCKWELL B-60 MATTE FINISH FREE OF

SURFACE DEFECTS AISI NO 36

LENGTH TOLERANCE 1" BUNDLES NOT TO

EXCEED 4,000 LBS EACH BUNDLE

MUST BE TAGGED AS TO MATERIAL

DIMENSIONS WEIGHT NUMBER OF SHEETS

UNICOR PART NUMBER (SHS0040)

PURCHASE ORDER NUMBER AND

DATE MATERIAL MUST BE SHIPPED IN A

MANNER ALLOWING FOR EASY UNLOADING

AT DESTINATION BY FORKLIFT

INSPECTION AND ACCEPTANCE SHEETS

MUST BE FREE OF SURFACE DEFECTS

SHEET STEEL MUST ARRIVE DRY AND

CORROSION FREE HAVING BEEN

PROTECTED FROM THE ELEMENTS

EN-ROUTE TO BE ACCEPTABLE

DJU6200008719 PAGE 46 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00074 SHS0042 7,000 EA 5000041375

18GAX39-1/2"WX110"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0042

IN ACCORD WITH ASTM A366,COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.044"/MAX=.052"

PER SHEET WT: 60-1/2#LBS.

WIDTH TKOLERANCE: -0+/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: SHEETS MUST BE

FREE OF SURFACE DEFECTS. SHEET STEEL

MUST ARRIVE DRY AND CORROSION FREE,

HAVING BEEN PROTECTED FROM THE ELEMENTS

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

00075 SHS0043 75 EA 5000041375

18GAX45-1/2"WX110"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0043

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.044" / MAX=.052"

PER SHEET WT: 69-1/2LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

DJU6200008719 PAGE 47 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00076 SHS0043 10 EA 5000041375

18GAX45-1/2"WX110"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0043

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.044" / MAX=.052"

PER SHEET WT: 69-1/2LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

00077 SHS0045 11,500 EA 5000041375

18GAX48"WX96"L,CRCQ,ASTM-A1008*

UNICOR PART NUMBER: SHS0045

DESCRIPTION: SHEET STEEL

IN ACCORDANCE WITH ASTM-A1008,COLD ROLLED

COMMERCIAL QUALITY. OILED (WATER SOLUBLE)

AND PAPER WRAPPED. MSDS FOR OIL IS

REQUIRED. MILL CERTIFICATION REQUIRED.

QUALITY CONTROL INSPECTION REQUIRED.

WIDTH TOLERANCE: -0 +6mm,CARBON STEEL

THICKNESS: MIN=.0449 / MAX=.0508

INSPECTION AND ACCEPTANCE: SHEET STEEL MUST

ARRIVE DRY AND CORROSION FREE. SHEET STEEL

MUST BE PROTECTED FROM THE ELEMENTS DURING

TRANSIT.

DJU6200008719 PAGE 48 OF 119

Item No. SUPPLIES OR SERVICES Quantity U/M UNIT PRICE AMOUNT IN US$ PR Number Del.Date

00078 SHS0046 75 EA 5000041375

16GAX36"WX120"L,CRCQ,ASTM-A366

UNICOR PART NUMBER: SHS0046

IN ACCORD WITH ASTM A366, COLD ROLLED

COMMERCIAL QUALITY OILED (WATER SOLUBLE)

AND PAPER WRAPPED MSDS FOR OIL IS REQUIRED

MILL CERTIFICATION REQUIRED Q.C.

INSPECTION REQUIRED

THICKNESS: MIN=.055" / MAX=.065"

PER SHEET WT: 75#LBS.

WIDTH TOLERANCE: -0+1/16"

AISI NO 1008-1010 #1 MATTE FINISH

INSPECTION AND ACCEPTANCE: Sheets must be free of surface defects. Sheet steel must arrive dry and corrosion free, having been protected from the elements

SPECIAL INSTRUCTIONS BANDED IN LIFTS

NOT TO EXCEED 5,000 LBS WITH 4"X4"

LENGTHWISE HARDWOOD SKIDS FOR FORKLIFT

UNLOADING FROM SIDE OF TRUCK.

00079 SHS0057 750…