MS_154_001.pdf
PDF 511 KB Posted
- Attached to
- Rebid DOTD Panel, Extruded, Aluminum
- Solicitation number
- 3000026901
- Issued by
- East Baton Rouge Parish, Baton Rouge City, Louisiana
About this file
This file is a Louisiana Department of Transportation and Development (DOTD) specification for extruded aluminum sign panels, covering Product IDs 51822 (6" size) and 11946 (12" size). The specification establishes comprehensive material and performance requirements for aluminum panels used in sign fabrication, with panels supplied in 36-foot lengths and featuring pre-drilled assembly slots beginning 6 inches from the edge and then every 12 inches thereafter. The document does not specify quantities, response dates, due dates, site visits, bidder meetings, award dates, or contract terms.
Material requirements mandate that panels comply with ASTM B221 Alloy 6063-T6 aluminum with chemical conversion coating meeting either ASTM B449 Class II or ASTM B921 Class II standards, and finished panels must maintain flatness of 0.031 inch per foot of length and 0.004 inch per inch of width. Each shipment must include aluminum material certification via Mill Test Report and coating certification demonstrating compliance with applicable ASTM specifications, with documentation establishing full traceability to supplied materials. Panels shall be packaged back-to-back and face-to-face, securely banded with non-steel or coated bands, with individual stacks not exceeding 2,000 pounds, delivered via open bed truck with tarping during shipment. DOTD will inspect all shipments prior to acceptance, and any material failing to conform to specifications will be rejected at no cost to the Department.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 3000026901.pdf | ||
| PREFERENCE U.pdf | ||
| BID SUBMISSION INSTRUCTIONS.pdf | ||
| PREFERENCE LOUISIANA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product IDs 51822 & 11946 MS Spec. 154-001 Rev. 10/1/26
Louisiana Department of Transportation and Development
Specifications
Extruded Sign Panels
Product ID No. 51822 – Size 6” Product ID No. 11946 – Size 12”
Description:
This specification covers extruded aluminum panels used for the fabrication of signs.
General Requirements:
Panels must be free from grease, dirt or loose phosphate coating and all burrs shall be removed from the edges.
Material:
Aluminum panels shall comply with ASTM B221, Alloy 6063-T6. Aluminum shall have a chemical conversion coating meeting either ASTM B449 Class II for chromate conversion coatings on aluminum or ASTM B921 Class II for non-hexavalent chromium conversion coatings.
After fabrication and coating application, the finished panel shall have a flatness equal to or less than 0.031 inch per foot of length and 0.004 inch per inch of width.
Detailed Requirements:
The panels shall conform to the dimensions shown in the “Side View Details” drawings for each Product ID including “Detail A” and “Detail B”. Panels shall be supplied in 36’ lengths; panel widths shall be as indicated by the Product ID.
All panels shall come complete with pre-drilled assembly slots beginning 6” from the edge then every 12” as shown in the “Top View of Assembly Slots” drawing.
Documentation:
Each shipment shall be supplied with the following documentation to indicate compliance with this specification:
Docusign Envelope ID: 579CAFCC-2135-84A9-8348-373DBBEF45D9
1. Aluminum Material Certification
• Mill Test Report or Mill Test Certificate indicating conformance with ASTM B221 for Aluminum Alloy 6063-T6. At a minimum, the report/certificate shall include:
o Alloy and Temper o Manufacturer/Mill Name o Applicable ASTM Specification o Chemical Composition o Tensile Strength o Yield Strength o Elongation o Heat/Lot/Batch Number and/or Production Identification to establish traceability to the material supplied o Date of Testing/Certification
2. Coating Certification
• Coating Test Report or Certification Report from the manufacturer or a qualified testing laboratory demonstrating compliance with ASTM B449, Class II, or ASTM B921, Class II, as applicable. Documentation shall include, at a minimum, the following:
o Applicable ASTM Specification and Class II Designation o Coating Material/Process Application o Material Tested o Test Methods and Results o Coating Lot/Batch Number and/or Production Identification to establish traceability to the material supplied o Date of Testing/Certification o Manufacturer/Testing Laboratory
All certificates and test results supplied will be kept on file by the Department.
Packaging:
All aluminum panels shall be packaged back to back and face to face. Stacks of panels shall be securely banded with a minimum of four (4) bands spaced at regular intervals along their length. Bands shall be non-steel or coated to prevent corrosion. Packaged stack of panels should not exceed 2000 pounds.
Delivery:
Deliveries shall be made by open bed truck for ease of forklift unloading. Panels shall be tarped during shipment.
Acceptance:
Prior to acceptance, each shipment shall be inspected by DOTD to review adherence to the specifications. Any material that fails to conform to any part of this specification shall be rejected. Rejected material must be removed at no cost to the Department.
| 2026-10-08T16:13:25+0000 | |
| Digitally verifiable PDF exported from www.docusign.com |
File details come from the government source that posted it. Updated .