Mounting Plates and Back-Up Iron Sights SOW v09072023.pdf

THE BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES

STATEMENT OF WORK

Firearms and Ammunition Technology Division (FATD) Mounting Plates and Back-Up Iron Sights

1.1 Background

ATF requires Pistol Mounted Optic (PMO) mounting plates, Back Up Iron Sights (BUIS), and installation of all parts, to include ATF purchased Leupold Delta Point Pro optics (vendor supplied mobile workspace). Installation shall be completed at the ATF Firearms Technology Division, in Martinsburg, WV. This Statement of Work (SOW) is to provide the products and services needed.

1.2 Scope

1.2.1 Mounting Plates

The vendor shall provide 2,700 C&H Precision Weapons Systems (CHPWS) brand Mounting Plates and related Optics accessories compatible with Optics ready Glock MOS Pistols. The meet or exceed specifications are as follows:

CHPWS GL-DPP V5

Plate Material: 6061 Aluminum

Finish: Type III Hard - Black Tolerance: +/-0.005 (unless otherwise stated on dwg) Length: 1.924” (+0.002”/-0.003”) Width: 1.008” Plate Thickness: 0.074” (+ 0.003”/- 0.002”)

Overall Thickness: 0.200” (Bolster height) Features: Forward and Rear Bolsters

4(ea.) optic posts / 0.155” (+/-0.003”) 2(ea.) plates mounting holes / 0.130” (+/-0.005”) 2(ea.) countersink / 0.250” (+/-0.005”) 2(ea.) T-Nut holes / 0.190” (+/-0.003”)

Hardware: 2(ea.) M3 x 6mm screws

Material – 18-8 Stainless Finish - Raw 2(ea.) 4-40 x 0.520” FH screws

Material – 18-8 Stainless Finish – Black Zinc

V5 T-Nut Material – 416 Stainless

Finish – Raw

Designed for use only on the Glock Generation 5 MOS pistols.

1.2.2 Back Up Iron Sights

The vendor shall provide 2,700 CHPWS brand Glock 19M BUIS, both front and rear, CHPWS SKU:

BUIS-AB-GL-DPP-430BF-440BR. Together these two components make up the BUIS package required.

The meet or exceed specifications are as follows:

CHPWS Glock Rear Sight (SKU: BUIS-AB-GL-DPP-430BF-440BR) Finish: Black, Mil Spec, Serrated glare reduction Coating: Black Nitride Height: .475” Rear Notch: .125” Set Screw: Yes Tritium Insert: No Material: 12L14 Steel

Dawson Precision Glock Front Sight (SKU: BUIS-AB-GL-DPP-430BF-440BR) Finish: Black, Mil Spec, Serrated glare reduction Coating: Black Nitride Height: .460” Width: .100” 416 Stainless Steel Set Screw: Yes Tritium Insert: No Material: 12L14 Steel

The contractor shall deliver all items at the time of installation to 244 Needy Road Suite

1600 Martinsburg, WV 25405. Delivery shall be coordinated with the Technical Point of

Contact provided on the purchase order. All items shall be new and not used or refurbished.

This requirement is FOB Destination, and all delivery pricing shall be included on the vendor quote.

1.2.3 Vendor Installation

The vendor shall provide standalone installation of the mounting plates, BUIS, and PMOs (Leupold Delta Point Pro) at the ATF Firearms and Technology Division, 244 Needy Rd., Martinsburg, WV 25405. The vendor shall supply their own installation personnel, equipment, and mobile installation capability as part of this requirement. Vendor shall install all PMO mounting plates, PMOs, and BUIS at the ATF Firearms and Technology Division, located in Martinsburg, WV. Vendor shall supply their own installation personnel, equipment, and mobile installation capability that can access the facility while not requiring dedicated internal workspace.

1.3 Required Delivery Date

The products shall be delivered and installed within 180 days of the purchase order award date.

1.4 Inspection and Acceptance

Inspection/Acceptance. Supplies or services delivered under this contract shall be inspected and accepted by the COR. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance in accordance with the appropriate inspection and acceptance clause.

The basis for acceptance shall be compliance with the Requirements/objectives/constraints set forth in the contract, and other terms and conditions of the contract. Deliverable items rejected shall be corrected in accordance with the applicable clauses.

Acceptance Criteria. The COR will review all draft and final deliverables to ensure accuracy, functionality, completeness, professional quality, and overall compliance within the guidelines/requirements of the delivery order. The contractor shall ensure the accuracy and completeness of all deliverables. Errors, misleading or unclear statements, incomplete or irrelevant information, and or excessive rhetoric, repetition, and “padding”, shall be considered deficiencies and shall be subject to correction by the contractor, at no additional cost to the Government. The contractor shall make any noted corrections/revisions, within 5 business days, after government review and comment on deliverables. If the deliverable does not meet the noted criteria, the Government will return it.

Rejection Procedures. If the COR rejects any deliverable, that rejected document will be handled in the following manner:

After notification that the deliverable did not meet the acceptance criteria, the Contractor shall resubmit an updated/corrected version within five (5) business days after receipt of Government comments.

Upon re-submission by the Contractor, the Government will reapply the same acceptance criteria. If the deliverable does not meet the acceptance criteria a second time, the Government might consider the Contractor as having deficient performance with respect to the subject task/subtask.

Any rework of rejected deliverables will be completed at no additional cost to the government.

No payments will be issued against rejected deliverables, until they are corrected and accepted by the government.

1.5 ATF Polices, Procedures and Standards

The contractor shall conform to the following ATF guidelines, security requirements, and federal regulation and legislation throughout the life of the contract. ATF reserves the right to amend/upgrade these standards and internal guidelines, processes and procedures based on technological advances.

a. Minimum Database Security Requirements as prescribed by the ATF Information Systems Security Office (ATF ISSO)

b. NIST Special Publication 800-53

c. ATF Minimum Security Requirements for Contractor Off Site Labs

d. ATF Publication, 7500.1 Rules of Behavior and Customer Agreement for ATF Workstation Users

e. Section 508 of the Rehabilitation Act (29 U.S.C. 794d), Subpart B – Technical Standards, 1194.21, Software Applications and Operating Systems, and 1194.22, Web-based Intranet and Internet Information and Applications, as it applies to this requirement.

1.6 Conformity to Section 508 of the Rehabilitation Act

The Contractor shall conform to Section 508 of the Rehabilitation Act. As part of the Workforce Investment Act of 1998, the U.S. Congress re-authorized Section 508 of the Rehabilitation Act, strengthening it by establishing accessibility standards. The reauthorization dictates that Federal agencies are required to ensure that all electronic and information technology purchased, maintained, or developed meet the new accessibility standards.

All information systems shall be compatible with existing technology and software. Section 508 Standards have been incorporated into the Federal Acquisition Regulation (FAR), 29 U.S.C. & 794d.

1.7 Data Rights

All materials, databases, software modules, Source Code, graphics, etc. inclusively developed and used in support of this contract shall become the property of ATF.