MK79 Pallet Metal SOW.docx

18 KB Posted

Attached to
MK79 Pallet Metal
Solicitation number
W519TC25QA019
Issued by

About this file

Written by GovTribe AI ·

This document is a Statement of Work (SOW) for the McAlester Army Ammunition Plant (MCAAP) detailing a procurement of metal pallet fabrication materials. The solicitation (W519TC25QA019) requires contractors to purchase seven specific steel materials, including hot rolled and cold rolled steel strips, rounds, flat bars, and angles, with precise dimensional specifications. Total quantities range from 100 to 1,850 units per material type, with specific requirements that all materials must have mill test reports, be free of paint, have minimal rust, and be transported in bundles not exceeding 6,000 pounds. Contractors must be registered in the System for Award Management (SAM), submit pricing for all items, provide technical specifications, list country of origin, and comply with the Trade Agreement Act. The procurement is being conducted by the Department of the Army Materiel Command Joint Munitions Command, with technical questions directed to angela.m.rouse3.civ@army.mil.

View the file

Other files

File Type Posted
W519TC-25-Q-A019 MK79 Pallet Metal.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

10 June 2025 Scope of Work McAlester Army Ammunition Plant – Materials for metal pallets

1.0 Objective: The McAlester Army Ammunition Plant (MCAAP) has a requirement to purchase materials for metal pallet fabrication.

2.0 Requirements:

* All material must have actual mill test report.

* All material must be free of paint, with light to no rust.

* All material must be covered for transport and shipped in bundles, not to exceed 6,000 lbs. each.

* 52.211-16 VARIATION IN QUANTITY (APR 1984)

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below.

(b) The permissible variation shall be limited to:

1% increase for all line item quantities over 1,000 5% increase for all line item quantities under 1,000 0% decrease shall apply to each line item number

3.0 Items and Quantities:

1. HR STEEL STRIP, 10 Ga.

· 10 gauge thick x 2-1/4 in. wide x 20 ft. long

· Hot rolled steel strip, ASTM A1011/A1011M Type B

· Quantity: 1700 each

2. CR STEEL ROUND, 3/4 in. dia.

· 3/4 in. dia. x R/20 ft. long

· Cold rolled steel round, C-1018 GRADE

· Quantity: 110 each

3. HR STEEL FLAT, 1/4 in. thk.

· 1/4 in. thk. x 2 in. wide x R/20 ft. long

· Hot rolled steel flat bar, A-36 GRADE

· Quantity: 450 each

4. HR STEEL FLAT, 1/4 in. thk.

· 1/4 in. thk. x 3 in. wide x R/20 ft. long

· Hot rolled steel flat bar, A-36 GRADE

· Quantity: 100 each

5. HR STEEL FLAT, 1/4 in. thk.

· 1/4 in. thk. x 4 in. wide x R/20 ft. long

· Hot rolled steel flat bar, A-36 GRADE

· Quantity: 1,850 each

6. HR STEEL EQUAL ANGLE, 1-1/2 in.

· 1-1/2 in. x 1-1/2 in. x 1/4 in. thk. x R/20 ft. long

· Hot rolled steel angle, A-36 GRADE

· Quantity: 188 each

7. HR STEEL UNEQUAL ANGLE, 2-1/2 in.

· 2-1/2 in. x 2 in. x 1/4 in. thk. x R/20 ft. long

· Hot rolled steel angle, A-36 GRADE

· Quantity: 2,000 each

File details come from the government source that posted it. Updated .