MK53_MK61_MK62_SPS_MK64_MK 57 - SOW.pdf

STATEMENT OF WORK,

Mk 53 MOD 0 Beams, Mk 61 Mod 0 Beams, Mk 62 Mod 0 Beams, MK 57 Mod 0 Beams, PCT/APBS Rings, and Alignment Fixture for Mk 64

1.0 Purpose

The Naval Surface Warfare Center Indian Head Division (NSWC IHD) Code G11 Systems Engineering Branch is procuring Mk 53 MOD 0 Beams, Mk 61 Mod 0 Beams, Mk 62 Mod 0 Beams, MK 57 Mod 0 Beams, PCT/APBS Rings, and Alignment Fixture for MK 64 to be used for the newly established STANDARD Missile (SM-6) Intermediate Logistics Maintenance Facility (ILMF) at Seal Beach, CA.

2.0 Requirements

2.1 The Contractor shall manufacture Qty: 2 each Mk 53 Mod 0 Beams according to the drawings and specifications on the Drawing DL 6212934 and associated drawings. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.2 The contractor shall manufacture Qty: 2 ea MK 61 Mod 0 Beams according to the drawings and specifications on the attached Drawing DL6213300 and associated drawings. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.3. The contractor shall manufacture Qty: 2 ea MK 62 Mod 0 Beams according to the drawings and specifications on the attached Drawing DL6213706 and associated drawings. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.4. The contractor shall manufacture Qty: 6 ea PCT/APBS Rings, according to the drawings and specifications on the attached drawing 6214176. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.5 The contractor shall manufacture Qty: 2 ea Alignment Fixtures for MK 64 according to the drawings and specifications on the attached drawing 6214226. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.6 The contractor shall manufacture Qty: 2 ea MK 57 Mod 0 Beams according to the drawings and specifications on the attached drawing 6213111. All testing will be performed at destination by the Government and is NOT required to be completed by the vendor.

2.7 The Contractor shall ship the units securely by Best Commercial Practice.

2.8 The Contractor shall serialize the equipment per the drawings. To obtain serial numbers, the contractor shall contact the Naval Sea Systems Command, Code SEA06L24, 1333 Isaac Hull Avenue SE, B201 4W-132, Washington, DC 20376 immediately upon contract award to ensure serial numbers are available to meet delivery requirements. Point of contact email: nssc_mkmodserial.fct@navy.mil

3.0 Inspection/Acceptance

Inspection and Acceptance will be conducted at destination. The Government has thirty (30) business days from final delivery of the items to complete the shipping inspections and accept the items.

4.0 Delivery Locations

Shipping shall be FOB destination.

Shipping address below for

NSWCIHD Detachment Picatinny Bldg 3355 Picatinny Arsenal, NJ 07806

ATTN: Lauren Jelinek, Code G11