Minimum Specifications-Hydraulic Shear .pdf

Minimum Specifications

Hydraulic Shear

The requirement for this solicitation is a hydraulic shear equivalent to the GMC Machine Tools HS-

0425E 4-foot hydraulic metal shear with electric back gauge.

1. Cutting capacities not less than:

a. Mild Steel – 4 foot wide by 0.25 inch thick

b. Stainless Steel – 4 foot wide by 10 gauge thick

c. Aluminum – 4 foot wide by 0.375 inch thick

2. Minimum cuttable material thickness not greater than 20 gauge

3. Shearing motor minimum 7.5 horsepower

4. Powered back gauge:

a. Minimum 24 inch

b. Front control with digital readout – inch/metric field selectable

c. Maximum adjustment step of 0.004 inch

d. Minimum 1 horsepower motor

5. Minimum 60-inch squaring arm with inch/metric dual scale

6. Minimum 24-inch front support arms

7. Machine dimensions not larger than 74 inches by 86 inches by 63 inches

8. Compatible with standard North American 3-phase power

9. ISO 9000 and OSHA compliant

Technical Evaluation Factor

All offerors will provide a copy of the manufacture’s datasheet for their proposed solution which clearly shows their proposal is equivalent to the aforementioned equipment and meets or exceeds the specifications listed below. Where the provided datasheet covers multiple models or configurations of the proposed solution, the offeror’s quote shall be annotated to indicate the specific model/configuration offered. In the event the quote is not annotated in such a way it is not readily apparent which set of specifications apply, the inferior specifications shall be assumed. In the event that a specification is not clearly and specifically addressed in the offeror’s provided documentation, the proposed solution shall be considered unacceptable. Offerors will not have an opportunity to provide additional information once the solicitation has closed. Failure to provide the requisite documentation prior to solicitation closing shall be considered as a no-bid.