Minimum Specifications for RFI Solicitation - Pan Tilt Positioner.pdf

This document specifies the minimum technical requirements for a motorized pan-tilt positioner system. The equipment must support a payload capacity of at least 40 pounds and weigh no more than 40 pounds, with continuous 360-degree azimuthal panning and elevation tilting capabilities ranging from 0 to 90 degrees. Pan and tilt speed must be at least 0.1 degrees per second, with position feedback resolution not exceeding 0.1 degrees for both axes.

The positioner must feature motorized control over a communication interface supporting RS232, RS422, RS485, or Ethernet wiring, with control via either OEM controlling software or serial data transmission. Additional requirements include a web interface compatibility option or controlling software included with the unit, physical attachment points with a minimum width greater than 8 inches, an operating temperature range of at least -10°C or higher, and a water and dust protection rating of IP67 or better to ensure durability in outdoor and harsh environmental conditions.