Microfluidics 110P Brochure.pdf

M-110P Microfluidizer™ Materials Processor M-110P Laboratory Model For

Continuous High Shear Fluid Processing

TB-P-7

Microfluidizer™ Bench-Top Processor Model Is Recommended For:

• Production of stable nano-dispersions and nano-emulsions

• Cell disruption (yeast, E.coli, etc.)

• Microencapsulation in polymers, liposomes and oils

• Deagglomeration

The M-110P models have been designed to reliably achieve continuous operating pressures up to 30,000 psi.

Microfluidizer™ processors maximize the energy-per-unit fluid volume, resulting in uniform submicron particles.

Available Options

• 400mL stainless steel open reservoir

• 1L stainless steel open reservoir

• 2L stainless steel open reservoir

• 2L pressurized stainless steel reservoir

• 7.6L pressurized stainless steel feed tank

• Manual priming and purging cylinder

• Seal quench system

• Sanitary flush diaphragm pressure transducer with display on touch screen

• Additional interaction chamber

• Auxiliary processing module

• Temperature sensors and displays

• IQOQ documentation and on-site execution

• FAT, SAT, on-site startup and operator training

• Preventative maintenance service

• Extended warranty

M-110P “Plug and Play” Laboratory Model for Continuous High Shear Processing

• Achieve processing pressures up to 2068 bar (30,000 psi)

• Produces product flow rate up to 120 ml/min (100 ml/min on 50 Hz model)

• Highest shear rate

• Guaranteed scalability

• Customizable options to suit every application

• Upgrade path to full cGMP model

• 7” HMI colour touch screen control

• CE compliant

Utilizing Microfluidics’ fixed geometry interaction chamber technology, and a ceramic (Zirconia) plunger, the M-110P is capable of processing a wide variety of fluids such as oil-in-water emulsions, solids-in-liquid suspensions, and cell disruptions, including the most difficult yeasts and plant cells, in as few as 1-2 passes. What’s more, the process is repeatable and is guaranteed to scale up to pilot and/or production volumes.

Model shown is subject to change depending on options selected.

© 2010, 2012 by Microfluidics. All rights reserved. 6/16 IH .5K

M-110P Specifications

Microfluidics reserves the right to change specifications without notice.

The M-110P family of machines contains an on-board 1.5KW (2HP) electric-hydraulic drive that powers a single acting intensifier pump.

Process pressures may be adjusted from 138-2068 bar (2000-30,000 psi) on the M-110P to produce the desired product results.

As the reciprocating intensifier pump travels through its pressure stroke, it drives the product at constant pressure through the interaction chamber. Within the chamber are unique fixed-geometry micro-channels through which the product stream will accelerate to high velocities. This creates high-shear and impact forces to bring about the desired results as the high velocity product stream impinges on itself and/or on wear-resistant surfaces.

Upon exiting the interaction chamber, the product flows through an external cooling coil which regulates the product to a desired temperature. At this point the product may be recirculated through the system for further processing or sent to the next step in the process.

Description M-110P

Pressure Range 138 – 2068 bar (2000 – 30,000 psi)

Minimum Sample Size

31mL

Flow Rate* Approximately (With Water)

Up To 120 ml/min - 60 Hz Up To 100 ml/min – 50 Hz

Product Temperature Limit

73℃ (165℉)

Power Requirements

60 Hz/120 VAC/20 Amp 60 Hz/230 VAC/10 Amp 50 Hz/220 VAC/12 Amp

Dimensions W x D x H

94cm x 71cm x 56cm (37” x 28” x 22”)

Weight 134 kg (295 lbs)

Features

Interaction Chamber Material

Diamond

Plunger Material

Zirconia Ceramic

Enclosure Stainless Steel

Drive Method Electric/Hydraulic

Product Pressure Gage

Mechanical

300 ml Glass Feed Reservoir

Yes

Stainless Steel Feed Reservoirs

Optional

Microfluidics International Corporation 90 Glacier Drive, Suite 1000 • Westwood, MA 02090, USA Tel: 617-969-5452 • 800-370-5452 • Fax: 617-965-1213 Email: mixinginfo@idexcorp.com • www.microfluidicscorp.com

IDEX Material Processing Technologies Bramley Drive, Vale Park West, Evesham, Worcestershire, WR11 1JH, UK Tel: (+44) (0) 1386 769 007 • Fax: (+44) (0) 870 1911116 Email: mixinginfo@idexcorp.com • www.microfluidicscorp.com

*Based on large chamber.

Standard chambers will reduce flow rate.

Includes Microfluidics standard 1 year warranty.

FRONT VIEW

TOP VIEW