MGS9111_specifications.pdf
PDF 70 KB Posted
- Solicitation number
- 300000279761289
- Issued by
- Missouri
About this file
This is a specification document issued by the Missouri Department of Transportation (MoDOT) for corrugated metallic-coated steel culvert pipe and related appurtenances. The specifications cover the material requirements for metallic-coated corrugated metal culvert pipe, pipe-arches, and end sections intended for maintenance purposes. The pipe may be either zinc or aluminum coated, with acceptable corrugation dimensions of either 2 2/3 by 1/2 inch or 3 by 1 inch. All pipe ends must feature 2 2/3 by 1/2 inch annular corrugations extending at least 4 corrugations from the pipe end. Bands, when required, shall be annular corrugated with 2 2/3 by 1/2 inch corrugations and a minimum width of 24 inches unless otherwise specified in the order. Pipe lengths must be ordered in 2-foot increments, with acceptable diameters listed in Specification Section 725. Metal arch pipe designations B1 through B4 must comply with AASHTO M 36 dimensional requirements.
Material acceptance will be determined in accordance with Specification Section 1020. The specifications reference applicable sections of Specifications 725, 1020, and 1022 for compliance with additional requirements. Vendors responding to the related MoDOT Southwest District bid for Corrugated Metal Pipe from the North Area must certify that end products meet these attached specifications. This is structured as a one-time purchase requirement, with specific diameter, quantity, and length information to be detailed in individual purchase orders.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MODOT SW 0000000052SL_SUPPLIER.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MGS-91-11G
(Page 1 of 1)
(Rev. 10-18-04 ME)
CORRUGATED METALLIC-COATED STEEL CULVERT PIPE, PIPE-ARCHES AND END
SECTIONS MGS-91-11G
1.0 DESCRIPTION. These specifications cover the purchase of metallic-coated corrugated metal culvert pipe and appurtenances for maintenance purposes.
2.0 MATERIALS.
2.1 PIPE.
2.1.1 The pipe and connecting bands shall comply with applicable sections of Specification Sec 725, 1020 and 1022, except as noted herein.
2.1.2 Unless otherwise noted in the bid request, the metallic coating may be either zinc or aluminum, as covered by the applicable specifications listed herein.
2.1.3 All pipe shall have either 2 2/3 by 1/2 inch or 3 by 1 inch corrugations.
2.1.4 The specified thickness of the coated sheet shall be any of those listed for the allowable overfill heights shown in Standard Plan 725.00A Table 1, for the pipe diameter specified and the corrugation used.
2.1.5 All pipe ends shall have 2 2/3 by 1/2 inch annular corrugations extending at least 4 corrugations from the pipe end. This will require re-rolling of ends for certain pipe.
2.1.6 Metal arch pipe B1 through B4 shall comply with the dimensional requirements of
AASHTO M 36.
2.2 BANDS.
2.2.1 Unless otherwise noted in the order, bands shall be annular corrugated over the entire width of the band with 2 2/3 by 1/2 inch corrugations.
2.2.2 Unless otherwise noted in the order, all bands shall be a minimum of 24 inches in width.
3.0 ORDERING INFORMATION.
3.1 Specific diameter and quantity information for pipe and bands, and lengths for pipe, are to be shown in the order. Acceptable diameters are shown in Specification Sec 725. Pipe lengths are to be in 2 foot increments.
3.2 Specific band information for type and width is to be shown in the order only if different from that specified herein. Alternate band types are dimple or formed, when allowed by the order.
3.3 If a specific metallic coating is desired, it is to be specified in the order for the applicable pipe and any applicable bands as "Zinc Coated" or "Aluminum Coated".
4.0 ACCEPTANCE. Material will be accepted in accordance with Specification Sec 1020.
https://www.modot.org/missouri-standard-specifications-highway-construction https://www.modot.org/missouri-standard-specifications-highway-construction https://www.modot.org/missouri-standard-specifications-highway-construction https://www.modot.org/missouri-standard-specifications-highway-construction
File details come from the government source that posted it. Updated .