MC Mens SS Khaki Shirt - Tech Data.pdf

SHIRT, MAN'S, KHAKI SHADE M-1, QUARTER LENGTH SLEEVE, SHALL BE MADE IN

ACCORDANCE WITH "CLASS 1" OF MIL-S-19984E DATED 20 SEPTEMBER 1989 AND ATTACHMENT 1A

DATED 16 APRIL 2010

PATTERN DATE: 26 APRIL 2006

ADDITIONAL INFORMATION FOR MIL-S-19984:

PATTERN DATE: 26 April 2006

STANDARD SAMPLE OF CLOTH, TROPICAL: POLYESTER

AND WOOL, MIL-C-29404, MARINE CORPS KHAKI SHADE

M-1, IS APPLICABLE FOR SHADE, FINISH, HAND,

PILLING AND COLORFASTNESS - ROLL NO. 3875

APPLIES.

INTERIM SPECIFICATION CHANGES TO MIL-S-19984E:

PAGE 1, PARA. 1.2, UNDER "SCHEDULE OF SIZES"

ADD THE FOLLOWING NECK SIZES: "18, 18-1/2".

PAGE 2, PARA. 2.1.1, UNDER "SPECIFICATIONS",

"MILITARY", DELETE "MIL-T-43548- THREAD,

POLYESTER, COTTON COVERED AND RAYON COVERED" AND

ADD UNDER "SPECIFICATIONS", "FEDERAL",

"A-A-50199- THREAD, POLYESTER CORE, COTTON- OR

POLYESTER-COVERED".

PAGE 2, PARA. 2.1.1, UNDER "SPECIFICATIONS",

"MILITARY", DELETE "MIL-C-43594- CLOTH,

INTERLINING, POLYESTER" AND ADD UNDER

"SPECIFICATIONS", "FEDERAL", "A-A-50135- CLOTH

INTERLINING, POLYESTER".

PAGE 2, PARA. 2.1.1, UNDER "SPECIFICATIONS",

"MILITARY", ADD "MIL-C-44296 - CLOTH, FUSIBLES"

PAGE 3, PARA. 3.3.2, DELETE IN ITS ENTIRETY AND

SUBSTITUTE: "3.3.2 INTERLINING. THE MATERIAL

FOR INTERLINING THE COLLAR, FRONT FACINGS AND

BREAST POCKET FLAPS SHALL BE POLYESTER FIBER

CLOTH CONFORMING TO A-A-50135. AS AN ALTERNATE,

NONWOVEN FUSIBLE CLOTH CONFORMING TO TYPE V,

CLASS 2 OR 3, STYLE B OF MIL-C-44296

MAY BE USED."

PAGE 4, PARA. 3.3.3, LINE 2, DELETE

"MIL-T-43548" AND SUBSTITUTE "A-A-50199".

PAGE 4, PARA. 3.3.3, LINE 4, DELETE "TICKET

NO." AND SUBSTITUTE "TEX". LINE 5, DELETE "70"

AND SUBSTITUTE "31-35". LINE 6, DELETE "40" AND

SUBSTITUTE "46-60".

PAGE 4, PARA. 3.3.3, LINE 5, UNDER "PLY" COLUMN

DELETE "OR 3".

PAGE 4, PARA. 3.3.3, LINE 6, UNDER "PLY" COLUMN

DELETE "6" AND SUBSTITUTE "2 OR 3".

PAGE 4, PARA. 3.3.3.1, LINE 4, DELETE

"MIL-T-43548" AND SUBSTITUTE "A-A-50199"

PAGE 4, PARA. 3.3.5.1, LINES 10-13, DELETE

"CAUTION: BLEACH, FABRIC SOFTENER, STARCH

AND/OR HOT WATER (EXCLUDING 100 DEGRESS F) WILL

HARM THE FABRIC OF THE SHIRT" AND SUBSTITUTE:

"CAUTION: BLEACH, FABRIC SOFTENER, DRYER SHEETS,

STARCH AND/OR HOT WATER (EXCEEDING 100

DEGREES F) WILL HARM THE FABRIC OF THE SHIRT."

NOTE: THE "DEGREES" SYMBOL MAY BE USED IN LIEU

OF THE WORD "DEGREES".

PAGE 5, AFTER PARA. 3.3.5.4, ADD THE FOLLOWING:

"3.3.5.5 BAR CODE LABEL/TAG. EACH ITEM SHALL BE

INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR

THE TAGS SHALL BE STANDARD BLEACHED SULFATE

HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND

DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER. THE

BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL

STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT

UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL

NSN'S BY THE GOVERNMENT. THE INITIALS "UPC"

MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR

NSN AND UPC SHALL BE MEDIUM TO HIGH DENSITY

AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY

VISIBLE ON THE ITEM WHEN IT IS FOLDED AND OR

PACKAGED AS SPECIFIED. THE LABEL'S LOCATION

SHALL CAUSE NO DAMAGE TO THE ITEM."

PAGE 9, TABLE 1 MANUFACTURING REQUIREMENTS,

NO. 5 F. DELETE "40/6" UNDER "NDL" AND "BOB/LPR"

COLUMNS AND SUBSTITUTE "40/2 OR 3" UNDER BOTH

COLUMNS.

PAGE 11, PARAGRAPH 9, LINE 10, DELETE

"APPROXIMATELY 3 INCHES" AND SUBSTITUTE "2 TO 3

INCHES".

PAGE 14, OPER. 15, CLOSE SIDES AND SLEEVES,

FINISHED APPEARANCE, DELETE "THE BACK MAY BE

LAPPED ON THE FRONT OR THE FRONT ON THE BACK,

BUT NOT ON BOTH." ALSO, SAME PARA., DELETE:

"301 LSB-1 12-16 70 70".

PAGE 14, OPERATION 15(A) (FORMERLY 15(B)),

DELETE "301 SSA-1 10-12 70 70" AND

SUBSTITUTE "301 OR 401 LSC-2 12-16 70 70".

PAGE 15, OPERATION 16, LINE 1, DELETE THE WORD

"SLEEVE".

PAGE 16, TABLE I MANUFACTURING REQUIREMENTS,

NO. 18B. DELETE "40/6" UNDER "NDL" AND "BOB/LPR"

COLUMNS AND SUBSTITUTE "40/2 OR 3" UNDER BOTH

COLUMNS.

PAGE 16, TABLE I MANUFACTURING REQUIREMENTS,

NO. 19A. AND B. DELETE ALL "40/6" UNDER "NDL"

AND "BOB/LPR" COLUMNS AND SUBSTITUTE "40/2 OR 3"

UNDER BOTH COLUMNS.

PAGE 18, PARA. 3.7, TABLE II, ADD THE FOLLOWING

SIZES: SIZE: 18; BREAST: 55; BACK

LENGTH: 31-3/4". SIZE: 18-1/2; BREAST: 57;

BACK LENGTH: 31-3/4".

PAGE 18, PARA. 3.7, TABLE III, OPPOSITE

"COMPONENTS" - UNDER SIZES 15, 15-1/2... ADD

SIZES 18 AND 18-1/2".

Page 18, Table III, under "Flaps" column, under "Length at sides" for sizes "13-1/2, 14, 14-1/2", delete "1-5/8" and substitute "1-7/8".

PAGE 20, PARA. 5.1.1, DELETE AND SUBSTITUTE:

"LEVEL A. EACH FULLY BUTTONED SHIRT SHALL BE

FOLDED IN ACCORDANCE WITH STANDARD PRACTICE TO

APPROXIMATE DIMENSIONS OF 14 BY 10-1/2 INCHES.

THE FOLDED SHIRT SHALL BE SECURED WITH

NONCORROSIVE PINS OR CLIPS, AND PLACED IN A

POLYETHYLENE BAG APPROXIMATELY 14-1/2 INCHES

LONG BY 11 INCHES WIDE, WITH A 1 INCH LIP ALONG

THE OPEN 11-INCH DIMENSION. THE POLYETHYLENE

FLEXIBLE FILM SHALL BE 0.0015 INCH THICK. THE

FINAL CLOSURE OF THE BAG SHALL BE ACCOMPLISHED

BY MEANS OF A TUCK OR REVERSE FLAP. EACH BAG

SHALL CONTAIN A LABEL (SEE 5.3.1)."