MATOC01_E-001.pdf
PDF 186 KB Posted
- Solicitation number
- Not on record
About this file
This document includes electrical drawings and notes for an airfield paving construction multiple-award task order contract (MATOC) opportunity issued by the Department of the Army Corps of Engineers Omaha District. The drawings and notes provide specifications for removing and installing airfield edge lights, signs, and ducts during runway and taxiway construction work. Key details include specifications for removing existing lights and signs and storing for reinstallation, installing new lights and signs per provided drawings and details, connecting to existing circuits, coordinating work with airfield staff, and conducting inspections and surveys of lights before and after construction.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 01 30 00.24 - Am 0002.pdf | ||
| 01 45 00.00 10 - Am 0002.pdf | ||
| Am 0002 - W9128F21R0013.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
S O
L
IC
IT
A T
IO
N N
O
D E
S
IG
N E
D B
Y
D E
S C
R
IP
T
IO
N
M A
R K
S
IZ
E
S U
B M
IT
T E
D B
Y
D A
T E
C O
N T
R A
C T N
O
C H
E C
K E
D B
Y
D R
A W
N B
Y
IS
S
U E D
A T
E
SHEET ID
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
THE APPROPRIATE TIME SO AS TO MAINTAIN THE CONSTRUCTION SCHEDULE.
WORK IDENTIFIED AS "BY GOVERNMENT". THE CONTRACTOR SHALL REQUEST THE WORK AT
THE CONTRACTOR SHALL COORDINATE WITH MINOT AFB ELECTRICAL STAFF TO ACCOMPLISH 5.
PROVIDED WITH NEW LAMPS.
SHALL BE STORED AND PROTECTED. FIXTURES SHALL BE RE-INSTALLED AS INDICATED AND
FIXTURES, BASE PLATES AND CURRENT TRANSFORMERS REMOVED FOR RE-INSTALLATION 4.
RETURNED TO THE GOVERNMENT.
REMOVED FIXTURES AND TRANSFORMERS NOT INDICATED FOR RE-INSTALLATION SHALL BE 3.
LEAVE 6' OF SLACK IN CONDUCTORS PASSING THROUGH PULL BOXES.2.
WHERE SPARE CONDUCTORS ARE INDICATED LEAVE 6' OF SLACK IN EACH FIXTURE BASE.1.
SHEETS).
REMOVE EXISTING MANDATORY SIGN. STORE AND REINSTALL AT NEW LOCATION (SEE ES D4
CIRCUIT CONDUCTORS AND/OR DUCT(S) TO REMAIN WHERE REQUIRED.
REMOVE ANY PART OF EXISTING R1, R2, SPARE 0R RDM CIRCUIT CONDUCTORS. OTHER D3
WITH CONSTRUCTION.
DURING CONSTRUCTION AND NOTIFY CONTRACTING OFFICER IMMEDIATELY IF THEY INTERFERE
POSSIBLE DUCT CROSSING. CONTRACTOR SHALL VERIFY LOCATION AND DEPTH. PROTECT D2
REMOVE AND STORE EDGE LIGHT FOR RE-INSTALLATION.D1
CONDUCTORS WHERE DUCT IS UNDER EXISTING PAVEMENT OR WHERE EXISTING DUCT IS TO REMAIN.
DUCT AND CIRCUITS. REMOVAL SHALL BE INCIDENTAL TO REMOVAL OF FIXTURES AND SIGNS. REMOVE ONLY
ETC.
L-824, #8 AWG, CABLE INSTALLED IN DUCT. NUMBER OF CONDUCTORS ARE INDICATED AS (1C), (2C), (3C), (RGS) REQUIRED WHERE INSTALLED UNDER FULL STRENGTH PAVEMENT.
2" PVC40 CONDUIT (SINGLE DUCT UNLESS NOTED). CONCRETE ENCASEMENT OR RIGID GALVANIZED STEEL
NEW L-861, ELEVATED TAXIWAY EDGE LIGHT INSTALLED PER DETAIL 2/E010
EXISTING L-858 GUIDANCE SIGN SHOWN FOR REFERENCE
L-867D LIGHT BASE PULL BOX PER DETAIL 3/E011
EXISTING PULL BOX SHOWN FOR REFERENCE
(2C), (3C), ETC.
L-824, #8 AWG, CABLE INSTALLED IN EXISTING DUCT. NUMBER OF CONDUCTORS ARE INDICATED AS (1C), L3 EXISTING TAXIWAY EDGE LIGHTS TO REMAIN. PROTECT DURING CONSTRUCTION.
CAP NEW DUCTS BELOW GRADE FOR FUTURE EXTENSION.L2
CONNECT NEW DUCT AND COUNTERPOISE TO EXISTING.L1
NEW L-852E SEMI-FLUSH TAXIWAY EDGE LIGHT INSTALLED PER DETAIL 2/E011
PULL BOX, REMOVE AND BACKFILL TO GRADE
EXISTING DUCT SHOWN FOR REFERENCE
EXISTING ELEVATED TAXIWAY EDGE LIGHT SHOWN FOR REFERENCE
EXISTING SEMI-FLUSH TAXIWAY EDGE LIGHT SHOWN FOR REFERENCE
EXISTING DUCT SHOWN FOR REFERENCE
EXISTING PULL BOX SHOWN FOR REFERENCE
(APPLIES TO ALL 'ED' SERIES DRAWINGS)
DEMO WORK SYMBOL LEGEND
(APPLIES TO ALL 'ES' SERIES DRAWINGS)
NEW WORK SYMBOL LEGEND
(APPLY TO ALL 'ES' SERIES DRAWINGS)
LAYOUT FLAG NOTES
(APPLY TO ALL ''ES' & ED' SERIES DRAWINGS)
CIRCUITING FLAG NOTES
(APPLY TO ALL 'ED' SERIES DRAWINGS)
DEMO FLAG NOTES
(APPLY TO ALL ELECTRICAL DRAWINGS)
GENERAL NOTES
2" PVC40 CONDUIT FOR LIGHT BASE DRAINAGE..
IN-PAVEMENT RUNWAY EDGE LIGHT. REMOVE, INCLUDING TRANSFORMER AND BASE CAN.
SEMI-FLUSH RUNWAY THRESHOLD/END LIGHT. REMOVE, INCLUDING TRANSFORMER AND BASE CAN.
W=WHITE, Y=YELLOW
RE-INSTALLED EXISTING L-862, ELEVATED RUNWAY EDGE LIGHT INSTALLED PER DETAIL 2/E010.
NEW L-850C, SEMI-FLUSH RUNWAY EDGE LIGHT INSTALLED PER DETAIL 1/E011. W=WHITE, Y=YELLOW
2/E013. G=GREEN
NEW L-850D SEMI-FLUSH RUNWAY THRESHOLD LIGHT INSTALLED PER DETAILS 1/E011, 1/E013 AND
CONNECT TO EXISTING RUNWAY CIRCUITS R1 AND R2, AND DISTANCE MARKER CIRCUIT RDM.C13
CONNECT TO EXISTING MANDATORY HOLD POSITION SIGN.C12
GOVERNMENT. SEE CIVIL PHASING SHEETS FOR PHASE THIS IS APPLICABLE FOR.
WHEN DISPLACED THRESHOLD IS REMOVED. TURN WHITE/YELLOW LENS ASSEMBLY OVER TO
FIXTURE MANUFACTURER PRIOR TO ORDERING. REINSTALL THE ORIGINAL LENS ASSEMBLY
WHITE/WHITE LENS ASSEMBLY AND PROVIDE A NEW WHITE/YELLOW LENS ASSEMBLY. VERIFY
DURING THE CONSTRUCTION PERIOD FOR APPROPRIATE PHASE REMOVE THE EXISTING C11
CONNECT TO EXISTING THRESHOLD CIRCUIT TH HOME RUN.C10
ORIGINAL POSITIONS AFTER DISPLACED THRESHOLD IS REMOVED.
THE REMAINING DISTANCE TO DISPLACED THRESHOLD AND RELOCATE ALL PANELS TO
CONTRACTOR TO RELOCATE EXISTING DISTANCE MARKER PANELS AS REQUIRED TO REFLECT C9
APPROPRIATE PHASE AS SHOWN ON CIVIL PHASING SHEETS.
TO REINSTALL ORIGINAL PANELS AFTER DISPLACED THRESHOLD IS REMOVED FOR
GOVERNMENT TO FURNISH AND INSTALL BLANK PANELS ON DISTANCE MARKER. CONTRACTOR C8
AS SHOWN ON CIVIL PHASING SHEETS..
THIS FIXTURE IS TO BE UNLIT DURING THE CONSTRUCTION PERIOD FOR APPROPRIATE PHASE C7
NEW 3/4" GALVANIZED STEEL BLANK COVER PLATE AT THIS LOCATION.
REMOVE EXISTING ELEVATED TAXIWAY EDGE LIGHT AND RETURN TO GOVERNMENT. PROVIDE A C6
THRESHOLD IS REMOVED FOR APPROPRIATE PHASE AS SHOWN ON CIVIL PHASING SHEETS.
ASSEMBLY WITH YELLOW-WHITE AND RE-INSTALL ORIGINAL ASSEMBLY WHEN THE DISPLACED
DURING THE CONSTRUCTION PERIOD THE CONTRACTOR WILL REPLACE EXISTING FIXTURE LENS C5
LENS TO GOVERNMENT FOR APPROPRIATE PHASE AS SHOWN ON CIVIL PHASING SHEETS.
LENS ASSEMBLY. REINSTALL ORIGINAL LENS AT END OF CONSTRUCTION AND RETURN RED
REMOVE AND STORE EXISTING LENS ASSEMBLY AND INSTALL GOVERNMENT FURNISHED RED C4
CONNECT TO EXISTING TAXIWAY B EDGE LIGHT CIRCUIT.C3
CONNECT EXISTING DISTANCE SIGN TO NEW CIRCUIT RDM CONDUCTORS.C2
SEE DETAIL 1/E012 FOR CIRCUIT CONNECTIONS.C1
R=RED
NEW L-850D SEMI-FLUSH RUNWAY END LIGHT INSTALLED PER DETAILS 1/E011, 1/E013 AND 2/E013.
EXISTING L-850, SEMI-FLUSH RUNWAY EDGE LIGHT SHOWN FOR REFERENCE. W=WHITE, Y=YELLOW
EXISTING L-858 GUIDANCE SIGN SHOWN FOR REFERENCE
SHALL BE INCIDENTAL TO PAVEMENT REMOVAL.
TAXIWAY EDGE LIGHT. REMOVE AND RETURN TO OWNER, INCLUDING TRANSFORMER. DEMOLITION OF BASE CAN
EXISTING ELEVATED TAXIWAY EDGE LIGHT SHOWN FOR REFERENCE
EXISTING SEMI-FLUSH TAXIWAY EDGE LIGHT SHOWN FOR REFERENCE
ELEVATED RUNWAY EDGE LIGHT. REMOVE, INCLUDING TRANSFORMER AND BASE CAN.
EXISTING L-850, SEMI-FLUSH RUNWAY EDGE LIGHT SHOWN FOR REFERENCE. W=WHITE, Y=YELLOW
EXISTING L-862, ELEVATED RUNWAY EDGE LIGHT SHOWN FOR REFERENCE. W=WHITE, Y=YELLOW EXISTING L-862, ELEVATED RUNWAY EDGE LIGHT SHOWN FOR REFERENCE. W=WHITE, Y=YELLOW
RELOCATED EXISTING L-858 GUIDANCE SIGN ON NEW PAD PER DETAILS 3/E012 AND 4/E012.
MARKING FOR REMOVAL. SEE DEMOLITION NOTES FOR ADDITIONAL INFORMATION.
(APPLY TO ALL "ED" ELECTRICAL DEMOLITION DRAWINGS)
DEMOLITION NOTES
GOVERNMENT.
CONSTRUCTION MUST BE REPAIRED BY THE CONTRACTOR AT NO EXPENSE TO THE
REPRESENTATIVE. ANY DAMAGE OR LOSS OF FUNCTION SHOWN TO HAVE OCCURRED DURING
A WRITTEN COPY OF THE AIRFIELD LIGHTS SURVEY TO THE CONTRACTING OFFICER OR HIS
LOCATION OF ANY NON-FUNCTIONING OR DAMAGED UNITS PRIOR TO CONSTRUCTION. PROVIDE
THRESHOLD LIGHTS, AND RUNWAY DISTANCE MARKERS TO DETERMINE AND RECORD THE
5. IN THE PRESENCE OF THE CONTRACTING OFFICER, PERFORM A SURVEY OF EXISTING EDGE LIGHTS, CORRECTLY AFTER REINSTALLATION SHALL BE REPLACED AT NO COST TO THE GOVERNMENT.
OF THE EXISTING FIXTURE PRIOR TO CONSTRUCTION. ANY FIXTURES THAT FAIL TO OPERATE
PRESENCE OF THE COR OR HIS OR HER REPRESENTATIVE TO VERIFY THE PROPER OPERATION
4. A SURVEY OF THE EXISTING FIXTURES TO BE REMOVED/REUSED SHALL BE CONDUCTED IN THE
3. HALF TONE ELECTRICAL ITEMS ARE TO BE PROTECTED IN PLACE UNLESS OTHERWISE NOTED.
WILL HAVE AN 'X' MARKED ON THE ELECTRICAL ITEM.)
2. FULL TONE ELECTRICAL ITEMS ARE TO BE REMOVED UNLESS OTHERWISE NOTED. (FULL TONE ITEMS
1. SEE CD SHEETS FOR CIVIL DEMOLITION INFORMATION.
(APPLY TO ALL "ES" ELECTRICAL INSTALLATION DRAWINGS)
INSTALLATION NOTES
CIRCUITS AND #6 AWG SIZE FOR 20 AMP SERIES CIRCUITS.
1. AIRFIELD LIGHTING CABLING (L-824 TYPE C) SHALL BE #8 AWG SIZE FOR 6.6 AMP SERIES
...\MATOC\MATOC01\40000 Design Products\CAD_BIM\_Sheets\MATOC01_E-001.dwg
9:31:28 PM 1/28/2021 PD: AEC_pdf.pltcfg DS: AEC_Screen.dscript
O M
A H
A D
IS
T R
IC
T
C
A P
IT
O L A
V E
O M
A H
A
N E
J A
N U
A R
Y
F
IL
E N
A M
E
A N
S I
D
W F
R
A
IR
F
O R
C E M
A T
O C
A
IR
F
IE
L D P
A V
IN
G
ADVERTISEMENT SET
B
M A
N N
H
K R
A M
H
K R
T O
C E -0
.d w g
E-001
E L E
C T
R
IC
A L N
O T
E S
D P
A U
L
®of Engineers
US Army Corps
U .S
A R
M Y C
O R
P S O
F E
N G
IN
E E
R S
G E
N E
R A
L R
E V
IS
IO
N S
/2
/2
File details come from the government source that posted it. Updated .