MaterialSpecs_Ochoco_FINAL.docx

Ochoco NF – adoption center material specifications August 2021

1. 6’Hx12’W panels

a. 1.9” high tensile 16 gauge tubing with 50,000 P.S.I. yield strength

b. self-contained connecting pins for easy interlocking

c. Components are compatible with each other and have the same features

d. Spring-activated gate latches

e. 2″ standard pipe hinges

f. panel and gate joints are saddle cut for extra strength

g. gray powder coat finish

h. at least six cross bars

2. 6'Hx12'W BOW (also called High Pole) GATES w: 9'6" RIDE FRAME

a. 1.9” high tensile 16 gauge tubing with 50,000 P.S.I. yield strength

b. self-contained connecting pins for easy interlocking

c. Components are compatible with each other and have the same features

d. Spring-activated gate latches

e. 2″ standard pipe hinges

f. panel and gate joints are saddle cut for extra strength

g. gray powder coat finish

h. at least six cross bars

i. overhead bar just under 10’ off the ground

3. 2 Pair (LH) Bucking Chutes (#1 & 1 Add on Chute ~ with Skids)

a. Rolling doors with safety pads

b. Rolling doors also with unbreakable plastic boards

c. 4 foot folding catwalk

d. Coated gunmetal gray

e. Length (Center to Center of Frames) – 101 3/4″

f. Width (Actual Width for Animals) – 33 1/8″

g. Catwalk Width (Center to Center of Frames) – 52 3/4″

h. Gate and Back Panel Heights – 72″

i. Weight (First Unit) – 1,418 lbs.

j. Weight (Add On Unit) – 1,033 lbs

4. Straight Crowd Alley | 2 Section | 1 Stop

a. 2 straight sections

b. Tapered sides that adjust from 12 to 24 inches at ground level and from 20 to 34 inches at the top

c. Connecting pins on ends to receive doors and/or panels

5. 12'x12' Solid side and back Open front horse SHELTER

a. Expandable

b. Manufactured with 15 gauge Round Galvanized Steel round Tube

c. Galvanized finish for rust protection

d. Quick and easy construction

e. Walls have a clamp system

f. Able to anchor down the shelter

6. Model 210 Sweep Tub (full sheeted) and Eliminator Gate (full sheeted)

a. 120 degree sweep tub

b. Full sheet

c. Panels that easily and quickly pin together

d. spring-loaded latch to allow for easy forward swing

e. Constructed from 2 inch 14 ga. Tubing

f. 6 foot tall sweep with 6 horizontal rails

7. 16' Gates Corral Gates (full sheeted)

a. Corral gate 59 5/8 inches overall top to bottom height

b. Vertical uprights and horizontal rails fabricated from 2 inch x 14 gauge high tensile steel tubing w 50,000 P.S.I. yield strength

c. Gate has 6 horizontal rails spaced 9.5 inches apart and reinforced with 1.9 inches x 16 gauge vertical spacer spokes

d. Gate has spring loaded plunger latch

e. Gate equipped with strap hinges mounted on ¼ x 2 x 16 inch strap w pre-punched holes

f. Strap hinges mount on hinge collars and retainer rings fabricated from 2 inch standard pipe

8. 2 way POSTS

a. Posts 6 feet tall

b. 2 inch standard pipe (Schedule 40 - .154 wall thickness)

c. 15 inch special formed dropped pins to receive WW panel or gate

d. Pins fabricated from 5/8 inch round steel bar and secured by 2 formed clips 1 ¾ inch long and 1 clip 1 inch long fabricated from 1/8 inch steel.

e. Posts with two-way pins for receiving more than one panel or gate

9. 6'Hx12'W BOW (also called High Pole) GATES w: 9'6" RIDE FRAME (full sheeted)

a. Same as item #2 (a.-i.) plus:

b. 14-gauge full sheet metal

c. With horse backed latch

10. Flying W Hydraulic tilt horse Chute

a. constructed of 2 1/2" x 3/16" tubing (minimum)

b. more than 3,800-pound weight

c. head and tail gates are operated by double cylinders without the use of flo-dividers

d. Back doors double skinned

e. Front doors skinned on the inside with a 10-gauge (minimum) steel

f. greaseable rollers and rubber bushings on head and tail gates and top squeeze

g. sides are barred every 4 inches

h. Drop down doors are full length or half doors, hinged on the ends

i. Chute floors are constructed of solid steel

j. Needs to have a quiet, and minimum of five horsepower motors

k. Outside Lengths 7' to 12'

l. Width - 6' -Doors open to 7' 6"

m. Tilt model