Materials_for_Transmission_Line_for_New_Sunshine_Substation.pdf

INVITATION TO BID

JU2225

MATERIALS FOR TRANSMISSION LINE FOR NEW SUNSHINE

SUBSTATION

City of Gallup

110 W Aztec Ave.

Gallup, NM 87305

RELEASE DATE: October 17, 2025

DEADLINE FOR QUESTIONS: October 27, 2025

RESPONSE DEADLINE: November 5, 2025, 2:00 pm

RESPONSES MUST BE SUBMITTED ELECTRONICALLY TO:

Invitation To Bid #JU2225 Title: Materials for Transmission Line for New Sunshine Substation https://procurement.opengov.com/portal/gallupnm

City of Gallup

INVITATION TO BID

Materials for Transmission Line for New Sunshine Substation

I. INTRODUCTION

II. ADVERTISEMENT FOR BIDS

III. GENERAL CONDITIONS

IV. SUPPLEMENTAL TERMS AND CONDITIONS

V. ESCALATION CLAUSE

VI. ADDITIONAL TERMS AND CONDITIONS

VII. SPECIAL TERMS AND CONDITIONS

VIII. SCOPE OF WORK

IX. PRICING PROPOSAL

X. VENDOR QUESTIONNAIRE

Attachments:

A - [A] Gallup_Sample_Contract

B - New Sunshine Substation T-Line Package

1. INTRODUCTION

1.1. Summary

The City of Gallup, New Mexico is seeking to purchase the materials associated with new transmission line for the new Sunshine Substation. This Invitation to Bid (ITB) is for MATERIALS ONLY and EXCLUDES all construction, installation, or field labor. The City invites qualified vendors to submit bids for the required materials and delivery.

1.2. Background

This Invitation to Bid (ITB) provides essential information for qualified manufacturers and/or suppliers to submit pricing bids for the materials required to support the transmission line associated with the City of Gallup’s Sunshine Substation project. The materials to be supplied are detailed in the attached specifications. This project is a key component in upgrading the City's electrical infrastructure to ensure greater reliability and improved service. Timely delivery of materials is critical to the success of the project; therefore, both proposed delivery timelines and pricing will be key factors in the evaluation and selection of the successful bidder. This solicitation is limited to material procurement and delivery only.

No construction, field installation, or labor services are included under this Invitation to Bid.

1.3. Contact Information

Frances Rodriguez

Purchasing Director

P.O. Box 1270

110 W. Aztec Avenue

Gallup, NM 87305

Email: frodriguez@gallupnm.gov

Phone: (505) 863-1334

Department:

Electric Department

Department Head:

Chuck Nourse

Electric Director

1.4. Timeline

Release Project Date October 17, 2025

Question Submission Deadline October 27, 2025, 5:00pm

Question Response Deadline October 31, 2025, 5:00pm mailto:frodriguez@gallupnm.gov tel:(505)863-1334

Proposal Submission Deadline November 5, 2025, 2:00pm

Join Zoom Meeting https://us06web.zoom.us/j/84533268263?pwd=uv

XSRUINJooseSZXo46Gae9KGhmej0.1

Meeting ID: 845 3326 8263

Passcode: 619676

One tap mobile

+12532158782,,84533268263#,,,,*619676# US

(Tacoma)

+13462487799,,84533268263#,,,,*619676# US

(Houston)

Join instructions https://us06web.zoom.us/meetings/84533268263

/invitations?signature=QmNuCcssc9A58pVym-

DyHrIKosIcO6zlsbsigmvaR18

Contractor Selection Date: Approximately 2 weeks after Council Approval https://us06web.zoom.us/j/84533268263?pwd=uvXSRUINJooseSZXo46Gae9KGhmej0.1 https://us06web.zoom.us/j/84533268263?pwd=uvXSRUINJooseSZXo46Gae9KGhmej0.1 https://us06web.zoom.us/meetings/84533268263/invitations?signature=QmNuCcssc9A58pVym-DyHrIKosIcO6zlsbsigmvaR18 https://us06web.zoom.us/meetings/84533268263/invitations?signature=QmNuCcssc9A58pVym-DyHrIKosIcO6zlsbsigmvaR18 https://us06web.zoom.us/meetings/84533268263/invitations?signature=QmNuCcssc9A58pVym-DyHrIKosIcO6zlsbsigmvaR18

2. ADVERTISEMENT FOR BIDS

CITY OF GALLUP, NEW MEXICO

Materials for Transmission Line for New Sunshine Substation

Invitation to Bid No. JU2225

2.1. Notice

Public notice is hereby given that the City of Gallup, New Mexico will receive sealed bids for Materials for Transmission Line for New Sunshine Substationuntil the hour of 2:00 pm., local time, on Wednesday, November 5, 2025at the office of the Procurement Manager at City Hall, via the City's eProcurement

Portal. Bids will be opened, read and tabulated at that time. No bids will be received or considered if received after the time stated above.

Specifications and Bidding Documents may be examined at the office of the Purchasing Director located at 110 West Aztec, Gallup, NM 87301, phone number (505) 863-1334. Additional information regarding this bid may also be viewed at https://procurement.opengov.com/portal/gallupnm/projects/208771.

By: Louis Bonaguidi, Mayor

Classified Legal Column:

Gallup Sun Publishing Date: Friday-October 17, 2025 Albuquerque Journal Publishing Date: Sunday-

October 19, 2025 https://procurement.opengov.com/portal/gallupnm/projects/208771

3. GENERAL CONDITIONS

Information for Bidders

3.1. SUBMISSION OF BIDS

All bids must be submitted ELECTRONICALLY via OpenGov at https://procurement.opengov.com/portal/gallupnm/projects/208771 prior to 2:00 pm Wednesday, November 5, 2025. The system will not accept bids submitted after the due date and time. Bid proposals must be submitted using the bid document forms furnished by the City of Gallup. Bids will be opened electronically in the Purchasing Department via virtual means.

3.2. BID OPENING DATE AND TIME

Bids shall be received until Wednesday, November 5, 2025 at2:00 pm. local time. https://procurement.opengov.com/portal/gallupnm/projects/208771. A virtual bid opening will be held for ALL interested parties in include members of the public. Bid Opening information may be retrieved on the OpenGov website at https://procurement.opengov.com/portal/gallupnm/projects/208771.

3.3. SPECIFICATIONS

Specifications, as included in this solicitation, are intended to indicate the requirements of the City of

Gallup and give an accurate description of minimum standards acceptable. All items equal or equivalent to these requirements and standards will be considered, except where otherwise noted.

3.4. MINOR DEVIATIONS OR IRREGULARITIES

The City reserves the right to accept minor modifications to or deviations from any specification, except where otherwise noted, as long as the proposed material meets the intent of the specifications. The City will be the sole entity to determine the acceptance or non-acceptance of any such modifications or deviations.

3.5. EQUIVALENTS

Equals or equivalents to these specifications will be considered provided Bidder furnishes sufficient proof that their offer meets or exceeds the intent of these specifications, unless the specifications state that no substitutions or equivalents are allowed. Failure to submit sufficient data/literature to allow a thorough evaluation of your bid proposal may be cause for rejection of your bid. Therefore, include copies of all pertinent data, specifications, or descriptive literature. The City will be the sole entity to determine the acceptance or non- acceptance of any modifications or deviations. The acceptance or rejection of equivalents shall be determined solely by the City of Gallup.

3.6. WARRANTY

Offeror agrees that all Manufacturer Warranties shall inure to the benefit of the City and all rights and remedies provided in such warranties shall extend to the City.

https://procurement.opengov.com/portal/gallupnm/projects/208771

3.7. BRAND NAMES

Where a product or brand name is indicated in the specifications, it shall mean "minimum acceptable level” or minimum quality required" by the City unless the specifications state that no substitutions or equivalents are allowed. If the Bidder is offering, as an equal or equivalent, an item other than the one specified then the manufacturer's name and model number of that item must be specified in the offer and sufficient specification and descriptive data and literature provided to permit a thorough evaluation.

Failure to provide appropriate information may result in disqualification of the offer.

3.8. NEW EQUIPMENT

All equipment must be new and the latest in production with parts and service readily available.

Equipment or goods classified as prototype or experimental, or a similar classification shall not be acceptable.

3.9. FORMS COMPLETION

Bidders to indicate compliance or exception to specifications. Exceptions to the specifications shall be listed and fully explained on a separate page entitled exceptions to specifications. The exceptions shall refer to the specification page and paragraph number the nature of each exception should be described in as much detail as necessary. Failure to do so may be reason to reject your bid.

3.10. STANDARD OF QUALITY

The similarity to any brand name is for the purpose of describing a standard of quality, performance and characteristics desired and not intended to limit or restrict competition. Bidders must state the brand name and model being bid and provide proof that the merchandise bid is equal or equivalent to the specifications. The City shall be the sole entity to determine acceptance or non-acceptance of equivalents.

3.11. COMPETENCY OF BIDDER

Bid proposals will be considered only from firms which are regularly engaged in providing the type of materials described in the bid and who can provide evidence that they have established a satisfactory record of performance to insure they can execute the requirements as stated herein. Any determination as to competency shall be made by appropriate City staff.

3.12. DELIVERY

Will be an important part in awarding the Invitation to BId (ITB). If a vendor breaches his contract by failing to deliver according to the time specified in the bid, the City of Gallup reserves the right to cancel the contract and to recover from the vendor any damages it suffers because of said breach.

3.13. NON-CONFORMING MATERIAL

If the City of Gallup issues a Purchase Order and upon receipt the material does not meet the

Specifications, the City will return the material Freight Collect, and at its option cancel the order and recover from the vendor any damages suffered.

3.14. SUBSTITUTIONS

Any material substituted from that originally bid shall have the prior approval of the City before shipping to the City. If a Purchase Order is issued and upon receipt the material does not meet specifications, the

City will return the material freight collect, and may at its option cancel the order.

3.15. BILLING

All goods or services must be billed to the City of Gallup and at prices not exceeding those stated on the

Purchase Order. If prices or terms do not agree with your quotation, notify the Purchasing Department immediately. Billing Information is as follows:

City of Gallup, Attn: Purchasing Dept, P.O. Box 1270, Gallup NM 87305; email: purch@gallupnm.gov

3.16. PAYMENT OR ACCEPTANCE NOT CONCLUSIVE

Vendor will supply the City with invoice for payment. No payment made under this contract shall be conclusive evidence of the performance of this contract, either wholly or in part, and that no payment made for the delivery of the items in whole or in part shall be construed as an acceptance of defective work or improper materials, nor relieve the Bidder from corrections of the defects. The final acceptance shall not be binding upon the City, nor conclusive, should it subsequently develop the Bidder has furnished inferior items or had departed from the specifications and/or the terms of the contract.

Should such conditions become evident, the City shall have the right, notwithstanding final acceptance and payment, to cause the item(s) to be properly furnished in accordance with the specifications (and drawings, if any) at the cost and expense of the Bidder.

3.17. BUSINESS LICENSE

Bidders are advised that they must have or obtain a current City of Gallup Business License for the type of material or services required under this contract before work commences or a purchase order issued.

Application available at the following: https://www.gallupnm.gov/151/Licenses-and-Permits

3.18. F.O.B POINT

All material shall be quoted F.O.B. DESTINATION, Freight Prepaid and Allowed. Bidders are cautioned that quoting material other than F.O.B. Destination may result in a finding of their bids as Non-responsive. City of Gallup Ordinances and State Law do not allow the City to own tangible goods or for services prior to receiving if said good or prior to service being rendered. All price(s) bid shall be Freight

Prepaid, freight included in prices. The City of Gallup will not pay separately stated freight charges.

3.19. PRICE TERMS

Bidder agrees that the prices bid shall remain in effect for 30 days from the date of the Bid Opening and subject to acceptance by the City of Gallup within that period. Acceptance period may be extended with the mutual agreement of the City and the Bidder.

https://www.gallupnm.gov/151/Licenses-and-Permits

3.20. CANCELLATION

The City reserves the right to cancel any contract resulting from this request for convenience by giving written notice to the vendor. The City shall be liable to the vendor for any services provided or material ordered and accepted prior to termination.

If the vendor fails to fulfill any obligation resulting from this contract in a timely and responsive manner, or it the vendor violates any of the terms of this contract, the City shall have the right to cancel the contract by giving written notice of cancellation to the vendor and recover from the vendor any damages resulting from vendor’s failure to perform.

3.21. LOCAL AND NEW MEXICO RESIDENT PREFERENCE

In accordance with City Ordinance, a local preference may be afforded a bidder who qualifies as a City of

Gallup resident business as defined by the City of Gallup Procurement Ordinance. Preference factors can be accessed at: http://sterlingcodifiers.com/codebook/index.php?book_id=635&chapter_id=44330

State of New Mexico statutes shall apply. New Mexico grants a preference to those contractors who have been certified by the State of New Mexico Department of Taxation and Revenue as a Resident

Contractor or a Resident Veteran Contractor at the time bids are opened, pursuant to 13-1-22 & 13-4-2

(NMSA 1978). The New Mexico Resident contractor’s preference or Resident Veteran contractor shall be the only preference that applies. Contractor must submit a copy of their New Mexico Resident

Contractor’s Certificate or New Mexico Resident Veteran Contractors Certificate with their bid in order to be considered for the preference as per 13-1-22 (a) NMSA 1978.

The applicable State of New Mexico Resident contractor’s or Resident Veteran contractor’s preference will be factored into bid prices where applicable. However, the preferences are not cumulative, and bidders will only be entitled to receive one preference.

3.22. NOTICE TO BIDDERS

This is a notice to all New Mexico resident businesses, New Mexico resident veteran businesses and New

Mexico contractors.

A. All resident businesses, resident veteran businesses and contractors must apply for a current certification issued by the Tax and Revenue Department.

B. Certificates issued prior to July 1, 2016 are deemed EXPIRED for purposes of claiming a preference, and therefore all businesses must reapply for certification.

C. Applications for in-state preference will NOT be processed through the State Purchasing

Division. All resident businesses, resident veteran businesses and contractors must obtain a preference number & certificate with the New Mexico Department of Taxation & Revenue.

D. Your preference will only apply if a copy of a Certificate issued on or after July 1, 2016 accompanies your bid or proposal.

E. Certificates must be provided with each and every bid and proposal submission individually, even if the Certificate was previously provided to State Purchasing Division with a prior http://sterlingcodifiers.com/codebook/index.php?book_id=635&chapter_id=44330 procurement. Certificates missing from procurement submissions will not benefit from the preference.

F. For additional information and application forms: Call Tax & Revenue Department at: 505-827-

0926, 505-827-0949, 505- 827-0948 or Web link to:

https://www.tax.newmexico.gov/businesses/in-state-veteranpreference-certification/

3.23. PROCUREMENT CODE

The City of Gallup Procurement Ordinance and/or the State of New Mexico Procurement Code shall apply.

3.24. AMENDMENTS

If any questions or responses require revision to the solicitation as originally published, such revisions will be by formal amendment only. If the solicitation includes a contact person for technical information, offerors are cautioned that any oral or written representations made by this or any person that appear to change materially any portion of the solicitation shall not be relied upon unless subsequently ratified by a written amendment to this solicitation issued by the Purchasing Office. For a determination as to whether any representation made requires that an amendment be issued, contact the Purchasing

Office.

3.25. CONTACT INFORMATION

Questions or clarifications regarding any phase of this solicitation, including specifications, shall submitted through the OpenGov eProcurement Portal Q&A section: eProcurement Portal.

Questions must be submitted before 5:00 pm on Monday, October 27, 2025.

3.26. PROTESTS

Any bidder or offeror who is aggrieved in connection with a solicitation or award of a contract may protest to the central purchasing office. The protest must be submitted in writing within seven (7) calendar days after knowledge of the facts or occurrences giving rise thereto. Any protest based on the terms of this Request for Competitive Sealed Proposals will be conclusively deemed waived if an Offeror does not specifically raise and address the protest its proposal submitted to the City’s Procurement

Office. All Offerors will be conclusively deemed to have knowledge of the facts or occurrences giving rise to a protest respecting an award at the time a contract is awarded by the City to an Offeror or

Offerors.

3.27. AWARD OF CONTRACT

The award, if made shall be made to the lowest responsible bidder based on base bid (excluding taxes), submitting a responsive bid that is most advantageous to the public. Except that if sufficient funds are available to fund alternative bids, the Owner may award the contract to the responsible bidder submitting the low combined bid within the funds available (base bid plus or minus alternates). Bidder must submit bids for all items – Base bid plus all alternates or their bid will be found non responsive.

The Owner reserves the right to reject any or all bids. Bids may be rejected for the following, among other reasons:

https://www.tax.newmexico.gov/businesses/in-state-veteranpreference-certification/

• Bids containing any irregularities.

• Unbalanced value of any items.

• Reason for believing collusion exists among the bidders.

• The bidder being interested in any litigation against the Owner.

• The bidder being in arrears on or having defaulted on a previous contract; or within the past three years been formally debarred in the State of New Mexico or any other jurisdiction; or whose license has been suspended or revoked by the appropriate licensing authority.

• Lack of responsibility as may be revealed by a financial statement, experience and equipment, questionnaires, etc.

• Uncompleted work which in the judgment of the city will prevent or hinder the prompt completion of additional work if awarded.

The Owner reserves the right to reject any or all bids in whole or in part, to cancel the bid, to waive technicalities and to accept the proposal it deems to be in the best interest of the Owner.

3.28. MULTI-AWARD

The City reserves the right to multi-award contracts as necessary for adequate delivery or service in accordance with 13-1-153 NMSA.

3.29. PROCUREMENT CODE VIOLATIONS

The Procurement Code imposes civil and criminal penalties for its violation. In addition, the New Mexico

Criminal Statutes impose felony penalties for illegal bribes, gratuities, and kick-backs.

THE CITY OF GALLUP RESERVES THE RIGHT TO CANCEL THE BID, OR REJECT ANY OR ALL BIDS IN WHOLE

OR IN PART, TO WAIVE TECHNICALITIES AND TO ACCEPT THE PROPOSAL IT DEEMS TO BE IN THE BEST

INTEREST OF THE CITY.

4. SUPPLEMENTAL TERMS AND CONDITIONS

4.1. ELECTRONIC COMMUNICATIONS

Communications regarding this procurement, including issuance of any amendments, shall submitted through the OpenGov eProcurement Portal Q&A section: eProcurement Portal. However, electronic submittals of the proposal whether by fax or other electronic means are not acceptable as noted in the

General Conditions.

4.2. UNIT PRICES

Typographical errors, errors in extending unit prices, arithmetic errors or errors clearly evident on the face of the bid document may be corrected in accordance with the Procurement Ordinance and

Procurement Regulations. Discrepancies involving the incorrect extension of unit prices shall be resolved in favor of unit prices as unit prices cannot be corrected.

4.3. TAXES

All bid prices shall be quoted EXCLUSIVE of taxes.

4.4. QUANTITIES

This is an indefinite quantity contract from which the City may place orders on an as needed basis.

Quantities listed are estimates of the City's needs on an annual basis. Actual usage may vary. The City does not guarantee the purchase of any specific minimum quantities, nor may any material be shipped or delivered without a valid purchase order number issued by the City.

4.5. ESCALATION CLAUSE

An Escalation Clause is used as part of the Bid Proposal in accordance with the terms of the Escalation

Clause section of this solicitation.

4.6. EXISTING AGREEMENT

Under the terms and conditions of this bid, all public bodies allowed by law may procure the supplies or services under this bid as described herein. The terms and conditions of this bid shall form a part of each order issued herein. Each public body shall be responsible for their own orders and the City of Gallup accepts no responsibility for other entities.

4.7. ACKNOWLEDGEMENT OF RECIEPT

The Acknowledgment of Receipt should be signed and returned to the Purchasing Office as soon as possible but no later than 5:00 pm local time onMonday, October 27, 2025. Only potential bidders who elect to return this form completed with the indicated intention of submitting a bid will receive copies of all written questions and the City’s written responses to those questions as well as copies of

Amendments, if any are issued.

4.8. BID DOCUMENTS

Bid documents may be retrieved by accessing the Purchasing page of the City of Gallup bidding website

OpenGov https://procurement.opengov.com/portal/gallupnm/projects/208771, by calling (505) 863-

1334 or visiting the Central Purchasing Office at 110 West Aztec, Gallup, NM 87301.

The City of Gallup will notify vendors of record of amendments/addenda that are issued via City's eprocurement software OpenGov. If not a vendor of record or if solicitation was downloaded through

City of Gallup website, it shall be vendor’s responsibility to check website frequently for copies of any addenda/amendments or correspondence concerning the solicitation. Failure to acknowledge all addenda could result in rejection of your bid/proposal as non-responsive. In the case of an inconsistency between information on this site and the Purchasing file document, the file document shall prevail.

5. ESCALATION CLAUSE

5.1. ESCALATION CLAUSE

Price escalations may be considered only under the following conditions:

A. Offered prices must be firm for at least ninety (90) calendar days after written notification of contract.

B. All requests for price increases shall be in writing and accompanied by:

1. A letter from the Contractor’s supplier certifying the price increase to the Contractor; or

2. Evidence of verifiable market conditions resulting in increased costs such as mandated labor rate increases and significant fuel or energy cost increases.

C. All invoices of the offered items, from suppliers to the Offeror, shall be subject to auditing by the City and furnished without delay upon request.

D. The City reserves the right to purchase on the open market or cancel a contract resulting from this request and solicit a new contract if the escalated price is above the current open market price for the same item. Cancellation of the contract shall not affect any outstanding orders.

E. All revisions of the price list shall become effective when they are accepted by the Purchasing

Office of the City, provided that they do not conflict with paragraph (F) or (G).

F. All approved price changes resulting from this escalation clause shall be firm for a period of ninety (90) calendar days after acceptance in writing from the City.

G. The Offeror shall be limited to a maximum of two (2) price escalations per contract period unless otherwise specified in this request.

H. The Offeror shall provide to the City written notice of any requested price changes, which shall become effective upon acceptance by the City of Gallup Purchasing Office.

I. If the Offeror receives any price de-escalations from the supplier of goods sold to the City through a contract resulting from this request, the Offeror is responsible for notifying the City of such de-escalations, and passing those price changes on to the City immediately.

6. ADDITIONAL TERMS AND CONDITIONS

6.1. GENERAL

When the City of Gallup Purchasing Department issues a purchase document in response to the Vendors bid, a binding contract is created.

6.2. DEBARRED OR SUSPENDED CONTRACTORS

A business (contractor, subcontractor or supplier) that has either been debarred or suspended pursuant to the requirements of .13-1-177 through .13-1-180, and .13-4-11 through .13-4-17 NMSA 1978 as amended, shall not be permitted to do business with City of Gallup and shall not be considered for award of the contract during the period for which it is debarred or suspended.

6.3. ASSIGNMENT

A. Neither the order, nor any interest therein, nor claim there under, shall be assigned or transferred by the Vendor, except as expressly authorized in writing by the City of Gallup

Procurement Administrator. No such assignment or transfer shall relieve the Vendor from the obligations and liabilities under this order.

B. Vendor agrees that any and all claims for overcharge resulting from antitrust violations which are borne by the City of Gallup as to goods, services, and materials purchased in connection with this bid are hereby assigned to the City of Gallup.

6.4. DISCOUNTS

Except in the case of tie bids, prompt payment discounts will not be considered in computing the low bid. Discounts for payment will be considered after the award of the contract. Discounted time will be computed from the date of receipt of the merchandise or invoice, whichever is later.

6.5. INSPECTION

Final inspection and acceptance will be made at the site. Goods rejected at the site for non-conformance with specifications shall be removed, at the Vendor's risk and expense, promptly after notice of rejection.

6.6. INSPECTION OF PLANT

The City of Gallup Procurement Administrator may inspect, at any reasonable time, the part of the contractor's, or any subcontractor's plant or place of business, which is related to the performance of this contract.

6.7. LIABILITY

The Vendor agrees that City of Gallup shall not be held liable for any costs incurred in preparation of this bid.

6.8. Tax

The bid prices shall exclude all taxes. Wherever requested in bid response, Vendor shall submit taxes on total bid as a separate unit item. Bids shall be awarded on unit price without regard of tax.

6.9. DEFAULT

The City of Gallup reserves the right to cancel all or any part of this order without cost to the City of

Gallup, if the Vendor fails to meet the provisions of this order and, except as otherwise provided herein, to hold the Vendor liable for any excess costs if failure to perform the order arises out of causes beyond the control and without the fault or negligence of the Vendor, such causes include but are not restricted to acts of God or the public enemy, acts of the State or Federal government, fires, floods, epidemics, quarantine restrictions, strikes, freight embargoes, unusually severe weather, and defaults of subcontractors due to any of the above, unless the City of Gallup shall determine that the supplies or services to be furnished by the subcontractor were obtainable from other sources in sufficient time to permit the Vendor to meet the required delivery schedule. The rights and remedies of the City of Gallup provided in this paragraph shall not be exclusive and are in addition to any other rights now being provided by law or under this order.

6.10. NON-COLLUSION

In, signing this bid, the Vendor certifies that he/she has not, either directly or indirectly, entered into any action in constraint of free competitive bidding in connection with this proposal submitted to the

City of Gallup Procurement Administrator.

6.11. NON-DISCRIMINATION

Vendors doing business with City of Gallup must be in compliance with the Federal Civil Rights Act of

1964 and Title VII of the Act, (Rev.,1979), and the Americans Disabilities Act of 1990. (Public Law 101-

336).

6.12. METHOD OF AWARD

A contract will be awarded on a Total All or None basis where indicated based on pricing and compliance with the specifications and requirements for each group of materials. City of Gallup reserves the right to waive irregularities, reject offers in whole or in part, and award this Bid in the best interest of the City of

Gallup.

6.13. RIGHT TO DISCONTINUE PROCUREMENT

The City of Gallup reserves the right to cancel this INVITATION TO BID at any time, and to reject any or all bids, or otherwise to proceed in the best interests of the City of Gallup. This in no manner obligates the City of Gallup or any of its agencies to the eventual purchase of any product or service, whether explicitly described or implied herein, until confirmed by a written contract and/or Purchase Order

6.14. F.O.B POINT

All materials shall be quoted F.O.B DESTINATION, Freight Prepaid. Bidders are cautioned that quoting material other than F.O.B DESTINATION may result in finding of their bids as Non-responsive. City of

Gallup Ordinances and State Law do not allow the City to own tangible goods or for services prior to receiving if said good(s) or prior to service being rendered. All price(s) bid(s) shall be Freight Prepaid, freight included in prices. The City of Gallup will not pay separately stated freight charges.

6.15. LATE BIDS

Any bid received after the specified time and date will be declared a "Late Bid" and will NOT be considered.

7. SPECIAL TERMS AND CONDITIONS

7.1. LAWS / CODES / STANDARDS / REGULATIONS

Contractor will be responsible for complying with all applicable local, state and federal regulations regarding transportation of materials, as well as all fees, permits and/or authorization required for delivery. Contractor will provide all supervision of employees required and be responsible for maintenance, insurance, mileage, fuel, permits, licenses, etc. required for the operation of the vehicles or equipment used for transportation. These requirements and all associated costs for providing the services shall be included in the bid price.

Equipment materials, or services supplied under this solicitation shall meet and comply will all current applicable Federal, State, and local laws, codes, standards, and regulations, and applicable industry safety standards and requirements.

The Contractor shall be properly licensed and qualified to furnish services and to perform the required work under applicable licensing statutes of the State of New Mexico and other applicable regulatory agencies.

Contractor shall comply with all applicable Federal, State and local government codes, laws, regulations, and requirements in the performance of the work described herein.

7.2. INDEPENDENT CONTRACTOR

The bidder awarded an agreement under this solicitation is an independent contractor and shall perform its obligations under this agreement, as it deems necessary and appropriate. The successful

Contractor and its officers, directors, agents and employees, are independent contractors performing services for the City of Gallup and are not employees of the City of Gallup. The successful Contractor, and its officers, directors, agents, and employees, shall not accrue leave, retirement, insurance bonding, use of City of Gallup vehicles or any other benefits afforded to employees of the City of Gallup. The successful Contractor covenants that it presently has no interest, and shall not acquire any interest, direct or indirect, financial or otherwise, which would conflict in any manner or degree with the performance of the required services.

7.3. INDEMNITY

The Contractor agrees, as material consideration for this Agreement, to defend, indemnify, and hold harmless the City of Gallup, its Elected Officials, Agents, and employees from and against any and all claims arising out of any asserted negligent act, error or omission of the Contractor, its officers, directors, employees or agents or arising in any way from this agreement or the Contractor’s activities hereunder. The indemnity agreed to in this paragraph shall not extend to liabilities, claims, damages, losses or expenses, including attorney fees arising out of: The preparation or approval of maps, drawings, opinions, reports, surveys, change orders, designs or specifications by the City of Gallup, or the agents or employees of the City of Gallup, or the giving of or the failure to give directions or instructions by the City of Gallup, or the agents or employees of the City of Gallup, where such giving or failure to give directions or instructions is the primary cause of bodily injury to persons or damage to property.

7.4. TERMINATION OF CONTRACT

In the event of a breach on any provision of the Agreement, the City of Gallup shall notify the Contractor of the fault within a reasonable time. If the Contractor fails to cure the breach or make other arrangements satisfactory to the City of Gallup, the City of Gallup may immediately terminate the Price

Agreement or take other steps, as it deems necessary. Safety related items must be corrected within twenty-four (24) hours. The Contractor shall pay the City of Gallup all costs and expenses, including reasonable attorney’s fees incurred by the City of Gallup, in exercising any of its rights or remedies in connection with enforcement of the Agreement.

The City of Gallup may terminate this Agreement for Convenience at any time, without penalty of any kind, by giving notice in writing to the Contractor. Said termination shall not nullify any payments due contractor for costs and work completed incurred through the date of termination.

7.5. APPROPRIATIONS

The terms of this Agreement are contingent upon sufficient monies being made available by the City of

Gallup for the performance of this Agreement. If sufficient appropriations and authorizations are not made by the City of Gallup, this Agreement shall terminate upon written notice being given by the City to the Contractor. The City's decision as to whether sufficient appropriations are available shall be accepted by the Contractor and shall be final.

7.6. GOVERNING LAW

The contract awarded to a Contractor as a result of this solicitation shall be governed in accordance with the laws of the State of New Mexico and the City of Gallup Ordinances.

8. SCOPE OF WORK

8.1. New Sunshine Substation Transmission Line Material

1. Summary and Background

The City of Gallup, New Mexico is seeking to purchase the materials associated with new transmission line for the new Sunshine Substation. This Invitation to Bid (ITB) is for MATERIALS ONLY and EXCLUDES all construction, installation, or field labor. The City invites qualified vendors to submit bids for the required materials and delivery.

This Invitation to Bid (ITB) provides essential information for qualified manufacturers and/or suppliers to submit pricing bids for the materials required to support the transmission line associated with the City of Gallup’s Sunshine Substation project. The materials to be supplied are detailed in the attached specifications. This project is a key component in upgrading the City's electrical infrastructure to ensure greater reliability and improved service. Timely delivery of materials is critical to the success of the project; therefore, both proposed delivery timelines and pricing will be key factors in the evaluation and selection of the successful bidder. This solicitation is limited to material procurement and delivery only.

No construction, field installation, or labor services are included under this Invitation to Bid.

2. Detailed Specifications:

The following are detailed specifications for the materials: "Stock numbers are included but may be substituted with equivalent items, unless marked as 'NO SUBSTITUTE."

• All coatings must be high corrosion resistant.

Bill of Material of New Items - Parts Table (NOTE: list includes parts from decomposed assemblies)

Stock Number Description

#4 AWG #4 AWG WIRE, COPPER OR EQUIVALENT

#4-7STR BARE COPPER (FT.) #4-7STR BARE COPPER (FT.) OR

EQUIVALENT

1GLA115124SN 1-WAY IN-LINE PHASE OVER PHASE SWITCH

NO SUBSTITUTE

8L90301 WASHER 3.3 OR EQUIVALENT

2817-15 DE EYE PLATE (60K) OR EQUIVALENT

3512 LOCKNUT, MF TYPE, 5/8" OR EQUIVALENT

3514 7/8" MF LOCKNUT OR EQUIVALENT

5432 DOUBLE BOLT SUPPORT, OHGW OR

EQUIVALENT

012690AEJ HELICAL ANCHOR, 7FT, 3 HELICES (70K) OR

EQUIVALENT

12697 ROUND ROD EXTENSION, 5FT (70K) OR

EQUIVALENT

75105 ROD, GROUND, 3/4" X 10'-0" OR

EQUIVALENT

615880 ROD, GROUND, 5/8" X 8'-0" OR

EQUIVALENT

818125301 WASHER 6K 0.125" OR EQUIVALENT

A021021 CLAMP COMPRESSION D.E. WITH JUMPER

TERMINAL COMPRESSION HAWK (EA) OR

EQUIVALENT

A0113511 CLAMP COMPRESSION D.E. WITH JUMPER

TERMINAL COMPRESSION CARDINAL OR

EQUIVALENT

AGS-5513 CARDINAL AGS SUSPENSION CLAMP (25K)

OR EQUIVALENT

AR-2328 ARMOR ROD, 3/8" OR EQUIVALENT

AS35BNK ANCHOR SHACKLE (40K) OR EQUIVALENT

B8XX-X 7/8" BOLT, MACHINE, BY REQ'D LENGTH

(EA) OR EQUIVALENT

C1100041 ANCHOR/ADAPTER, OVALEYE, 18" LONG

(70K) OR EQUIVALENT

CC207 TANK GROUND #6 SOLID-1/0 STR (EA) OR

EQUIVALENT

CE-5261 AGS CLEVIS EYE (20K) OR EQUIVALENT

CGS-1095 CUSHION-GRIP SUSPENSION CLAMP, #2-4/0

OR EQUIVALENT

CH280 Steel Pole property: McWane CH280 NO

SUBSTITUTE

CH285 Steel Pole property: McWane CH285 NO

SUBSTITUTE

CH495 Steel Pole property: McWane CH495 NO

SUBSTITUTE

CH595 Steel Pole property: McWane CH595 NO

SUBSTITUTE

CH2105 Steel Pole property: McWane CH2105 NO

SUBSTITUTE

CN15 TANK GROUND #6 SOLID-1/0 STR (EA) OR

EQUIVALENT

CW80 4" CURVED WASHER 15/16"HOLE OR

EQUIVALENT

ES-1-123-1200-3W TRANSMISSION SWITCH, 3-WAY PLAIN,

115KV NO SUBSTITUTE

G5 CLAMP, GROUND ROD OR EQUIVALENT

G-414 GUY WIRE THIMBLE, 1/2"-9/16" OR

EQUIVALENT

GC910B-***T GROUND WIRE CLAMP WITH BOLT OR

EQUIVALENT

GC-207P CONNECTOR, PLATED COPPER ALLOY OR

EQUIVALENT

GS36096CC GUY STRAIN INSULATOR, 7/8" DIA, 9FT

LONG, CLEVIS/CLEVIS (35K) OR EQUIVALENT

GTC-09 CONNECTOR, #4 TO FLAT OR EQUIVALENT

HAS162N SUSPENSION CLAMP, ALUMINUM, 1.10"-

1.62" OR EQUIVALENT

HBS200 1/2" x 13" x 2" BOLT (EA) OR EQUIVALENT

J1163/J1164 GROUND WIRE CLAMP OR EQUIVALENT

J6829 CURVED WASHER, 4"X4" 15/16" HOLE OR

EQUIVALENT

MF80 7/8" LOCKNUT, MF TYPE (EA) OR

EQUIVALENT

PG44 GRID GAIN, 4"X4" OR EQUIVALENT

PSC2030529 DEADEND TEE, FLAT BACK, 60KIP OR

EQUIVALENT

RW 1-3/8-50 ROUND WASHER 1/2" BOLT OR

EQUIVALENT

S025090S2010 INSULATOR, DEADEND, Y CLEVIS TOP, ANSI

BALL BOT (EA) (25K) OR EQUIVALENT

S030047S2010/P250048S9020 POST INSULATOR GAIN BASE, 2 HOLE BLADE

ENDFITTING (EA) (30K) OR EQUIVALENT

S030060S2010 INSULATOR, SUSPENSION, Y CLEVIS TOP,

ANSI BALL BOT (EA) (30K) OR EQUIVALENT

SC-5194 AGS SOCKET CLEVIS (30K) OR EQUIVALENT

SD-70-N 3/8" HSS STATIC DEADEND OR EQUIVALENT

SYC30 SOCKET Y-CLEVIS (EA) (30K) OR

EQUIVALENT

T2050450 STEEL GROUND WIRE CLIP OR EQUIVALENT

TB78JE12BNK TURN BUCKLE CLEVIS EYE (36K) OR

EQUIVALENT

TC2 THIMBLE CLEVIS CONECTION, 3/4"PIN (35K)

OR EQUIVALENT

W-CU-4-7-STR WIRE, #4-7STR BARE COPPER OR

EQUIVALENT

YA4C-2LN 2 HOLE NEMA PAD TO #4-STR BARE CU OR

EQUIVALENT

YC-5207 Y-CLEVIS EYE, 3/4", 20KIP OR EQUIVALENT

YCS07 Y-CLEVIS EYE (EA) OR EQUIVALENT

YCS1090 Y-CLEVIS EYE 90° (EA) OR EQUIVALENT

YGL34C2 COMPRESSION CLAMP, #4 - 3/4" GROUND

ROD OR EQUIVALENT

YHD-400 CONNECTOR 4/0 T 4/0 OR EQUIVALENT

YHO-150 CONNECTOR 3/8" TO #4-7STR CU (EA) OR

pf 31003001: Platform, Transform 16" Heavy

Duty OR EQUIVALENT

Bill of Material - Pre-Assembled Component Kits (Factory-Assembled Only) (NOTE: costs of assembly parts are included in the Parts Table)

F3.16 STEEL CROSS PLATE, CORROSION

PROTECTED

GOAB 1-WAY 1-WAY IN-LINE SWITCH

GOAB 3-WAY 3-WAY GOAB SWITCH

H4.1 GROUNDING ASSEMBLY, PLATFORM

M601-AP TRANSMISSION STEEL POLE

GROUNDING ASSEMBLY

TG-22A GUYING ASSEMBLY, AUTOMATIC

WITH THIMBLE CLEVIS

TG-25C TRANSMISSION GUYING TEE

TM-1DP-C POLYMER SUSPENSION DEADEND

ASSEMBLY (CARDINAL)

TM-1DP-H POLYMER SUSPENSION DEADEND

ASSEMBLY (HAWK)

TM-3BP TRANSMISSION BRACED POST

TM-3P POLYMER JUMPER POST ASSEMBLY

TM-4A 3/8" EHS STATIC ASSEMBLY, Y-CLEVIS, 0°-60°,

3/8" EHS

TM-4G STATIC DEADEND ASSEMBLY

TM-6B DOUBLE BOLT OHGW SUPPORT

TP-115BP 115kV BRACED POST TANGENT

ASSEMBLY

TS-5AA VERTICAL DOUBLE DEADEND 0-90

DEGREE ANGLE,954

Bill of Material - Line Cables and Concentrated Loads Table

3_8-7_strand_ehs_steel 3/8" EHS Static Wire

OR EQUIVALENT

cardinal_acsr 954 ACSR CARDINAL

WIRE OR EQUIVALENT

hawk_acsr 477 ACSR HAWK WIRE

OR EQUIVALENT

Service Requirements

The vendor shall provide the following services:

• Vendor Quality and Delivery Requirements: All materials shall be new, unused, and free from defects. Vendors must provide manufacturer documentation and certification of compliance with industry standards. No fabrication or on-site inspection is required.

• Delivery Coordination: The vendor shall deliver all materials to the designated location at the

City of Gallup Warehouse. Delivery must be coordinated in advance with the City's Point of

Contact to ensure timely arrival.

• Delivery Notifications: If the vendor anticipates any delays, they must provide the City's Point of

Contact with advanced notice

• Documentation: The vendor shall supply all required documentation, including product manuals, test reports, and certificates of compliance with applicable industry standards.

Delivery Requirements

The vendor shall meet the following delivery specifications:

• Delivery Date: All materials must be delivered by February 09, 2026.

• Delivery Location:

City of Gallup Warehouse

1900 Warehouse Ln

Gallup, NM 87301

• Packaging: All materials must be securely packaged to prevent damage during shipping and handling.

General Information

The City of Gallup encourages proposals from vendors with proven experience in supplying transmission materials for electrical substations. The City reserves the right to:

• Reject any or all proposals,

• Waive informalities or irregularities, and

• Award the contract to the vendor whose proposal best serves the interests of the City.

All questions regarding this Scope of Work must be submitted through the OpenGov bid system.

Thank you for your interest in supporting the City of Gallup’s infrastructure initiatives.

9. PRICING PROPOSAL

NEW SUNSHINE SUBSTATION TRANSMISSION LINE MATERIALS - PARTS TABLE "STOCK NUMBERS ARE

INCLUDED BUT MAY BE SUBSTITUTED WITH EQUIVALENT ITEMS, UNLESS MARKED AS 'NO

SUBSTITUTE'." (NOTE: LIST INCLUDES PARTS FROM DECOMPOSED ASSEMBLIES)

Line Item Stock Number Description Quantity Unit of

Measure Unit Cost Total

1 #4 AWG #4 AWG WIRE,

COPPER (OR

EQUIVALENT)

100 FT

2 #4-7STR BARE COPPER (FT.) #4-7STR BARE

COPPER (OR

EQUIVALENT)

56 FT

3 1GLA115124SN 1-WAY IN-LINE PHASE

OVER PHASE SWITCH

(NO SUBSTITUES)

1 EA

4 8L90301 WASHER 3.3 (OR

EQUIVALENT)

6 EA

5 2817-15 DE EYE PLATE (60K)

(OR EQUIVALENT)

53 EA

6 3512 LOCKNUT, MF TYPE,

5/8" (OR

EQUIVALENT)

4 EA

7 3514 7/8" MF LOCKNUT

(OR EQUIVALENT)

12 EA

8 5432 DOUBLE BOLT

SUPPORT, OHGW (OR

EQUIVALENT)

2 EA

9 012690AEJ HELICAL ANCHOR,

7FT, 3 HELICES (70K)

(OR EQUIVALENT)

14 EA

10 12697 ROUND ROD

EXTENSION, 5FT

(70K) (OR

EQUIVALENT)

14 EA

Line Item Stock Number Description Quantity Unit of

Measure Unit Cost Total

11 75105 ROD, GROUND, 3/4"

X 10'-0" (OR

EQUIVALENT)

3 EA

12 615880 ROD, GROUND, 5/8"

X 8'-0" (OR

EQUIVALENT)

4 EA

13 818125301 WASHER 6K 0.125"

(OR EQUIVALENT)

6 EA

14 A021021 CLAMP

COMPRESSION D.E.

WITH JUMPER

TERMINAL

COMPRESSION HAWK

(EA) (OR

EQUIVALENT)

12 EA

15 A0113511 CLAMP

COMPRESSION D.E.

WITH JUMPER

TERMINAL

COMPRESSION

CARDINAL (OR

EQUIVALENT)

18 EA

16 AGS-5513 CARDINAL AGS

SUSPENSION CLAMP

(25K) (OR

EQUIVALENT)

6 EA

17 AR-2328 ARMOR ROD, 3/8"

(OR EQUIVALENT)

2 EA

18 AS35BNK ANCHOR SHACKLE

(40K) (OR

EQUIVALENT)

6 EA

19 B8XX-X 7/8" BOLT, MACHINE,

BY REQ'D LENGTH

(EA) (OR

108 EA

Unit Cost Total

20 C1100041 ANCHOR/ADAPTER,

OVALEYE, 18" LONG

(70K) (OR

EQUIVALENT)

14 EA

21 CC207 TANK GROUND #6

SOLID-1/0 STR (EA)

(OR EQUIVALENT)

14 EA

22 CE-5261 AGS CLEVIS EYE (20K)

(OR EQUIVALENT)

6 EA

23 CGS-1095 CUSHION-GRIP

SUSPENSION CLAMP,

#2-4/0 (OR

EQUIVALENT)

2 EA

24 CH280 Steel Pole property:

McWane CH280 (NO

SUBSTITUES)

1 EA

25 CH285 Steel Pole property:

McWane CH285 (NO

SUBSTITUES)

1 EA

26 CH495 Steel Pole property:

McWane CH495 (NO

SUBSTITUES)

1 EA

27 CH595 Steel Pole property:

McWane CH595 (NO

SUBSTITUES)

1 EA

28 CH2105 Steel Pole property:

McWane CH2105 (NO

SUBSTITUES)

1 EA

29 CN15 TANK GROUND #6

SOLID-1/0 STR (EA)

(OR EQUIVALENT)

6 EA

30 CW80 4" CURVED WASHER

15/16"HOLE (OR

96 EA

Unit Cost Total

31 ES-1-123-1200-3W TRANSMISSION

SWITCH, 3-WAY

PLAIN, 115KV (NO

SUBSTITUES)

1 EA

32 G5 CLAMP, GROUND

ROD (OR

EQUIVALENT)

4 EA

33 G-414 GUY WIRE THIMBLE,

1/2"-9/16" (OR

EQUIVALENT)

56 EA

34 GC910B-***T GROUND WIRE

CLAMP WITH BOLT

(OR EQUIVALENT)

8 EA

35 GC-207P CONNECTOR, PLATED

COPPER ALLOY (OR

EQUIVALENT)

2 EA

36 GS36096CC GUY STRAIN

INSULATOR, 7/8" DIA,

9FT LONG,

CLEVIS/CLEVIS (35K)

(OR EQUIVALENT)

14 EA

37 GTC-09 CONNECTOR, #4 TO

FLAT (OR

EQUIVALENT)

12 EA

38 HAS162N SUSPENSION CLAMP,

ALUMINUM, 1.10"-

1.62" (OR

EQUIVALENT)

3 EA

39 HBS200 1/2" x 13" x 2" BOLT

(EA) (OR

EQUIVALENT)

6 EA

40 J1163/J1164 GROUND WIRE

CLAMP (OR

8 EA

Unit Cost Total

41 J6829 CURVED WASHER,

4"X4" 15/16" HOLE

(OR EQUIVALENT)

12 EA

42 MF80 7/8" LOCKNUT, MF

TYPE (EA) (OR

EQUIVALENT)

96 EA

43 PG44 GRID GAIN, 4"X4" (OR

EQUIVALENT)

12 EA

44 PSC2030529 DEADEND TEE, FLAT

BACK, 60KIP (OR

EQUIVALENT)

6 EA

45 RW 1-3/8-50 ROUND WASHER

1/2" BOLT (OR

EQUIVALENT)

12 EA

46 S025090S2010 INSULATOR,

DEADEND, Y CLEVIS

TOP, ANSI BALL BOT

(EA) (25K) (OR

EQUIVALENT)

30 EA

47 S030047S2010/P250048S9020 POST INSULATOR

GAIN BASE, 2 HOLE

BLADE ENDFITTING

(EA) (30K)(OR

EQUIVALENT)

9 EA

48 S030060S2010 INSULATOR,

SUSPENSION, Y

CLEVIS TOP, ANSI

BALL BOT (EA) (30K)

(OR EQUIVALENT)

6 EA

49 SC-5194 AGS SOCKET CLEVIS

(30K) (OR

EQUIVALENT)

6 EA

50 SD-70-N 3/8" HSS STATIC

DEADEND (OR

14 EA

Unit Cost Total

51 SYC30 SOCKET Y-CLEVIS (EA)

(30K) (OR

EQUIVALENT)

30 EA

52 T2050450 STEEL GROUND WIRE

CLIP (OR

EQUIVALENT)

100 EA

53 TB78JE12BNK TURN BUCKLE CLEVIS

EYE (36K) (OR

EQUIVALENT)

6 EA

54 TC2 THIMBLE CLEVIS

CONECTION, 3/4"PIN

(35K) (OR

EQUIVALENT)

14 EA

55 W-CU-4-7-STR WIRE, #4-7STR BARE

COPPER (OR

EQUIVALENT)

38 EA

56 YA4C-2LN 2 HOLE NEMA PAD

TO #4-STR BARE CU

(OR EQUIVALENT)

3 EA

57 YC-5207 Y-CLEVIS EYE, 3/4",

20KIP (OR

EQUIVALENT)

2 EA

58 YCS07 Y-CLEVIS EYE (EA) (OR

EQUIVALENT)

14 EA

59 YCS1090 Y-CLEVIS EYE 90° (EA)

(OR EQUIVALENT)

3 EA

60 YGL34C2 COMPRESSION

CLAMP, #4 - 3/4"

GROUND ROD

3 EA

61 YHD-400 CONNECTOR 4/0 T

4/0 (OR EQUIVALENT)

6 EA

Unit Cost Total

62 YHO-150 CONNECTOR 3/8" TO

#4-7STR CU (EA) (OR

EQUIVALENT)

14 EA

63 pf 31003001: Platform, Transform 16" Heavy

Duty (Refer to Sheet

07.05) (OR

EQUIVALENT)

4 EA

TOTAL

BILL OF MATERIAL - PRE-ASSEMBLED COMPONENT KITS (FACTORY-ASSEMBLED ONLY) (NOTE: COSTS

OF ASSEMBLY PARTS ARE INCLUDED IN THE PARTS TABLE)

Line Item Stock

Number Description Quantity Unit of

Measure Unit Cost Total

64 F3.16 STEEL CROSS PLATE,

CORROSION

PROTECTED

14 EA

65 GOAB 1-WAY 1-WAY IN-LINE SWITCH 1 EA

66 GOAB 3-WAY 3-WAY GOAB SWITCH 1 EA

67 H4.1 GROUNDING

ASSEMBLY, PLATFORM

4 EA

68 M601-AP TRANSMISSION STEEL

POLE GROUNDING

ASSEMBLY

3 EA

69 TG-22A GUYING ASSEMBLY,

AUTOMATIC WITH

THIMBLE CLEVIS

14 EA

70 TG-25C TRANSMISSION

GUYING TEE

6 EA

71 TM-1DP-C POLYMER SUSPENSION

DEADEND ASSEMBLY

(CARDINAL)

18 EA

Line Item Stock

Number Description Quantity Unit of

Measure Unit Cost Total

72 TM-1DP-H POLYMER SUSPENSION

DEADEND ASSEMBLY

(HAWK)

9 EA

73 TM-3BP TRANSMISSION

BRACED POST

6 EA

74 TM-3P POLYMER JUMPER

POST ASSEMBLY

3 EA

75 TM-4A 3/8"

EHS

STATIC ASSEMBLY, Y-

CLEVIS, 0°-60°, 3/8"

EHS

2 EA

76 TM-4G STATIC DEADEND

ASSEMBLY

14 EA

77 TM-6B DOUBLE BOLT OHGW

SUPPORT

2 EA

78 TP-115BP 115kV BRACED POST

TANGENT ASSEMBLY

2 EA

79 TS-5AA VERTICAL DOUBLE

DEADEND 0-90 DEGREE

ANGLE,954

1 EA

BILL OF MATERIAL - LINE CABLES

Measure Unit Cost Total

80 3_8-

7_strand_ehs_steel

3/8"

EHS Static Wire 956.06 FT

81 cardinal_acsr 954 ACSR CARDINAL

WIRE OR

5,025.61 FT

Unit Cost Total

82 hawk_acsr 477 ACSR HAWK

WIRE OR

EQUIVALENT

1,355.99 FT

10. VENDOR QUESTIONNAIRE

10.1. Warranty *

Offeror agrees that all Manufacturer Warranties shall insure to the benefit of the City and all rights and remedies provided in such warranties shall extend to the City

☐ Yes

☐ No

*Response required

10.2. New Mexico Resident Veterans Preference Certification * Please Attach Copy of your Certificate with response.

New Mexico Resident

New Mexico Veteran Resident

New Mexico Native American Resident

New Mexico Native American Veteran Resident

*Response required

10.3. Exceptions to Specifications*

In the interest of fairness and sound business practice, it is mandatory that you state any exceptions taken by you to our specifications.

If your bid does not meet all of our specifications, you must state to which on the follow up vendor question 3.1

☐ Yes

☐ No

*Response required

When equals "Yes"

10.3.1. Please explain your exceptions *

Please provide detailed information on your exceptions.

If your bid does not meet our specifications, and your exceptions are not listed in your response. The

City of Gallup may disregard your bid.

*Response required

10.4. CONFLICT OF INTEREST AND DEBARMENT/SUSPENSION CERTIFICATION *

Do you have a conflict of interest or have been debarred/suspended as described below?:

If you answer yes you will be required to answer a follow up question.

CONFLICT OF INTEREST

As utilized herein, the term “Vendor” shall mean that entity submitting a proposal to City of Gallup in response to the above referenced bids/request for proposals. The authorized Person, Firm and/or

Corporation states that to the best of his/her belief and knowledge: No employee or City Council member of the City of Gallup (or close relative), with the exception of the person(s) identified below, has a direct or indirect financial interest in the Vendor or in the proposed transaction.