Material Ordering Data Sheet for 1140-0201-05487-1140-0201KOI 002 ASTM-B-369 copper-nickel castings.pdf

MATERIAL ORDERING DATA

ASTM-B-369

IDN: N4523A 1140-0201

ICN: 38RNK52401 KO: S03 KOI: 002

Paragraph 5 Ordering Data

A. ASTM-B-369/B369M, STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY

CASTINGS, dated 01 APRIL 2020.

B. Quantity of castings:1ea Item 46 C. Copper Alloy UNS number (Table 2): C96400

D. Pattern or drawing number: 120-4326543 Rev Z

Condition (as-cast, machined, and so forth): Machined E. ASME Boiler and Pressure Vessel Code Requirements: No F. When material is purchased for agencies of the U.S. Government, the Supplementary

Requirements of this specification may be specified.

G. The following are optional and should be specified in the purchase order when required:

Pressure test or soundness requirements (Specification B 824) Witness inspection (Specification B824) Certification (Specification B824) Foundry test report (Specification B824) Product marking (Specification B824) Weldability test Approval of weld procedure and records of repairs

MATERIAL ORDERING DATA

ASTM-B-369

H. Supplementary Requirements:

S1 – Referenced documents S2 – Soundness S3 – Pressure test S4 – Weld repair S5 – Quality Assurance S6 – Product marking

I. Preparation for delivery:

S7.1 – Preservation, packaging, and packing is required: Level C The material shall be separated by size, composition, grade, or class and shall be preserved and packaged, Level A or C, packed, Level A, B, or C as specified in the contract or purchase order, in accordance with the requirements of Practice B900.

S7.2 – In addition to any special marking required by the contract or purchase order, marking for shipment shall be in accordance with MIL-STD-129.

Additional Data Requirements:

5.2.3 - Certification: Limited to chemical and mechanical results only Provide a report of NDT results per section 12.5.6 of S9074-AR-GIB-010/278, excluding item (d).

5.2.5 - Product Markings - Mark castings per Note 5 of DWG 120-4326543. Upon acceptable pressure test and visual inspection each casting shall have its heat number marked on the raised pad. To record the heat number the casting may be marked by vibro tool, or round bottom low stress stamps, per MIL-STD-792.

S2 - Soundness - Each casting is Category 3-I.

See additional Information attachment for testing clarification/requirements

Prepared By: Andrew Stutz

Code: 260.7