MATERIAL ORDERING DATA.pdf
PDF 30 KB Posted
- Attached to
- CABLE, POWER Federal contract opportunity
- Solicitation number
- SPMYM226Q7151
About this file
This is a product specification document for a federal supply item. The document specifies requirements for electrical power cable with National Item Identification Number (NIIN) LLS054213 and Document Number 53657900. The required product is AWG-4 gauge power electrical cable consisting of 4 conductors supplied in continuous 500-foot rolls. The cable must be constructed of copper with Type W insulation rated for 90 degrees Celsius and UL-listed for safety compliance. The cable jacket must be black and rated for 90 degrees Centigrade at 2000 volts. Marking requirements stipulate that cables shall be durably embossed or indented on the surface at intervals not exceeding 24 inches with the manufacturer name, wire size, number of conductors, cable type, temperature rating, voltage rating, and UL/CSA certification information.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7151.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ADDED DATA
NIIN: LLS054213 DOCUMENT: 53657900
CABLE, POWER ELECTRICAL
AWG-4
4 CONDUCTOR, EACH ROLL ROUND 500 FT CONTINUOUS LENGTH REQUIRED
COPPER, TYPE W, 90 DEG C
UL-LISTED
BLACK JACKET, RATED 90 DEGREE CENTIGRADE, 2000 VOLT
EMBOSSED/INDENTED WITH FOLLOWING: MFR
SIZE
NO OF CONDUCTORS
TYPE
TEMP RATING, VOLTAGE OR UL/CSA
CABLES SHALL BE DURABLY MARKED ON THE SURFACE AT INTERVALS NOT EXCEEDING
24 INCHES WITH DATA ABOVE.
File details come from the government source that posted it. Updated .