MATERIAL ORDERING DATA 62887900.pdf
PDF 97 KB Posted
- Attached to
- PLATE METAL
- Solicitation number
- SPMYM227Q01170001
About this file
This is a Material Ordering Data sheet for steel plate procurement under MIL-S-22698 specification. The document specifies the requirements for ordering structural steel plates conforming to military standards for weldable ordinary and higher strength applications.
The procurement requires three (3) steel plates with the following specifications: Grade DH-36, Class U-Mill Finish (hot rolled or normalized), measuring 1-1/4" thickness by 96" width by 20 feet length. The material must conform to MIL-S-22698C dated 29 JUN 1988, including Amendment 1 (19 DEC 1988), Amendment 2 (20 OCT 1994), Notice 1 (8 SEP 1998), Notice 2 (30 AUG 2002), and Notice 3 (29 DEC 2020). First article inspection is not required, and dimensional tolerances are not applicable. The surface finish Class U is required, with Class P not applicable. The preservation, packing, and marking level is Commercial, and all unit intermediate and shipping containers must be marked in accordance with MIL-STD-129 per DLA procurement Note C20. The material is identified by IDN N4523A 6288-7900 and ICN 88MSM00001, prepared by Material and Technical Support Code 244.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment - SPMYM227Q01170001.pdf | ||
| CDRL EXHIBIT A .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6288-7900
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: DH-36
C. Class required: Class U-Mill Finish (hot rolled or normalized).
D. Plate Size: 1-1/4” THK X 96” WD X 20’ LG.
E. When first article is required: Not required.
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U.
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commercial
Additional Data Requirements: QUANTITY REQUIRED: 03 PLATES
All unit intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
File details come from the government source that posted it. Updated .