MATERIAL ORDERING DATA 62887900.pdf
PDF 97 KB Posted
- Attached to
- PLATE METAL
- Solicitation number
- SPMYM227Q0117
About this file
This is a Material Ordering Data sheet for steel plate procurement under specification MIL-S-22698C. The requirement is for three (3) steel plates meeting DH-36 grade specifications with Class U-Mill Finish (hot rolled or normalized). Each plate measures 1-1/4" thick by 96" wide by 20' long. The specification referenced is MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988, incorporating Amendments 1 and 2, and Notices 1 through 3 (with the latest notice dated 29 DEC 2020). All specifications must be to the latest revision at time of award.
The procurement mandates commercial-level preservation, packing, and marking requirements in accordance with MIL-STD-129, with further instructions referenced in DLA procurement Note C20. No first article inspection is required, and no dimensional tolerances, chemical composition deviations, surface finish alternatives, or ultrasonic testing method deviations are applicable. The Material and Technical Support department (Code 244.4) prepared this ordering data under IDN N4523A 6288-7900.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM227Q0117.pdf | ||
| CDRL EXHIBIT A .pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6288-7900
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: DH-36
C. Class required: Class U-Mill Finish (hot rolled or normalized).
D. Plate Size: 1-1/4” THK X 96” WD X 20’ LG.
E. When first article is required: Not required.
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U.
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commercial
Additional Data Requirements: QUANTITY REQUIRED: 03 PLATES
All unit intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
File details come from the government source that posted it. Updated .