MATERIAL DATA SHEET 61401355.pdf
PDF 125 KB Posted
- Attached to
- B, C GASKET SPIRAL
- Solicitation number
- SPMYM226Q7973
About this file
This is a Material Ordering Data document for metallic-flexible graphite spiral wound gaskets manufactured to military specification MIL-G-24716A (dated 5 April 1993). The ordering data is identified by IDN N4523A 6140-1355, ICN 38WAI23103, KO S03, and KOI 005. The specific part number is M24716 TY 2 CL B 42 NPS 150 PSI, classified as a Type II, Class B gasket designed for service pressures up to 900 degrees Fahrenheit.
The gasket specifications include outer dimensions of 45-7/8" OD by 44-5/8" ID (outer ring), 43-1/8" ID (gasket insert), and 42-3/8" ID (inner ring), with a thickness of 0.175 inches. The inner and outer rings are constructed of carbon steel with no protective coating, while the spiral winding is composed of nickel-chromium-iron (Inconel). The ordering data specifies that complete gaskets (rather than refills) are required, with commercial preservation and packaging in bulk containers at the contractor's option. Certificate of conformance, inspection records, load deflection curves, and fire-retardant materials are not required. Marking must comply with specification and contract requirements. The document was prepared by David Cho under Code 260.5.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7973.pdf | ||
| MATERIAL DATA SHEET 61401354.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
IDN: N4523A 6140-1355
ICN: 38WAI23103 KO: S03 KOI: 005
Paragraph 6.2 Ordering Data
A. TITLE: MIL-G-24716A, GASKETS, METALLIC-FLEXIBLE, GRAPHITE, SPIRAL WOUND;
dated 5 April 1993
B. Part or identifying number (PIN) (see 1.2): M24716 TY 2 CL B 42 NPS 150 PSI
C. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see 2.1.1 and 2.2): Per spec
D. For Type I gaskets, specify:
1. Type and model of equipment on which used:
2. Equipment manufacturer:
3. Equipment manufacturer's part number:
4. Gasket dimensions:
5. Material of construction:
6. Compression test load initial uncompressed thickness:
7. Compressed thickness at total load:
8. Service:
9. Type of closure:
10. Number and size of bolts:
11. Federal Stock Number (if available):
12. If inside or outside rings are required:
E. Alternate compression test, required thickness range (see 3.1.1.3): Per spec
F. For type II gaskets specify gasket size and whether complete gaskets (see 3.1.2) or refills (see 3.1.2.1) are required: Complete Gasket
G. Temperatures and other service conditions: Up to 900 degrees F. 3.2.1 applies
H. When an alternate metal outer ring material or a protective coating of the metal outer ring is required (see 3.2.2): Carbon steel inner and outer ring. No coating.
I. Inspection records are not required per paragraph 6.5 of the spec.
J. Finer finish is not required for test plates.
K. Load deflection curves are not required.
L. Examination of each of the gaskets in a lot for alloy identity is not required.
M. Test of each of the gaskets in a lot for refill sliding fit is not required.
N. Certificate of conformance is not required.
O. Fire retardant lumber and plywood is not required.
P. Fire retardant fiberboard is not required.
Q. Commercial preservation and packaging is required.
R. Quantity per package does not apply.
S. Bulk packaging is required.
T. Container selection is the contractor’s option.
U. Caseliners are not required.
V. Marking is required in accordance with the specification and contract.
Additional Data Requirements: GASKET, SPIRAL WOUND, ,42"NPS-150#, TYPE II, CLASS B
DIMENSIONS: 45-7/8" OD X 44-5/8" ID (OUTER RING) X 43-1/8" ID (GASKET INSERT) X 42-3/8"
ID (INNER RING), 0.175" THK.
INNER AND OUTER RINGS ARE CARBON STEEL, WINDING ARE NI CR FE (INCONEL)
Prepared By: DAVID CHO Code: 260.5
File details come from the government source that posted it. Updated .