MARINE JET POWER PARTS JOTFOC SIGNED.pdf

JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION

SIMPLIFIED ACQUISITION PROCEDURES (SAP) FAR 13.106-1(b)

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABLE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM THE CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT

WILL MEET THE GOVERNMENT’S REQUIREMENT.

PURCHASE REQUEST OR REQUISITION

NUMBER

PROJECT/TASK

NUMBER

ESTIMATED AMOUNT (Over Micro- Purchase Threshold, but up to the SAT)

CITE AUTHORITY & JUSTIFICATION TYPE – READ FAR 6.302 TO DETERMINE APPROPRIATE TYPE

10 U.S.C. § 3204(a)(1)

ONLY ONE RESPONSIBLE SOURCE AND NO OTHER SUPPLIES OR SERVICES WILL SATISFY

AGENCY REQUIREMENTS.

10 U.S.C. § 3204(a)(2) UNUSUAL AND COMPELLING URGENCY

10 U.S.C. § 3204(a)(3)

INDUSTRIAL MOBILIZATION; ENGINEERING, DEVELOPMENTAL, OR RESEARCH CAPABILITY; OR

EXPERT SERVICES

10 U.S.C. § 3204(a)(4) INTERNATIONAL AGREEMENT

10 U.S.C. § 3204(a)(5) AUTHORIZED OR REQUIRED BY STATUTE

10 U.S.C. § 3204(a)(6) NATIONAL SECURITY

10 U.S.C. § 3204(a)(7) PUBLIC INTEREST [SECRETARY OF HOMELAND SECURITY NEEDS TO APPROVE THIS DOC]

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE. The brand name purchase of various waterjet propulsion parts. The parts are in support of the 26’ OTH IV. Vessel: Multi. (See Enclosure 1). The various waterjet propulsion parts are provided by Marine Jet Power, the Original Equipment Manufacturer (OEM)

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED. The technical data for the various waterjet propulsion parts required to make an accurate assessment of equal or alternate equipment meeting the Coast Guard’s performance, fit, form and function requirements for this procurement is unavailable. The proper operation of the above parts is critical for the safety of both crew and vessel alike, especially during underway operations, where propulsion is of the utmost importance. Failure of the various waterjet propulsion parts would place a unit in a hazardous situation with the loss of maneuverability, possibly placing the vessel in a flooding situation. Any attempt to manufacture this item without the proper (OEM) parts and access to OEM reproduction manufacturing drawings, spec, tolerances/parameters, test procedures and other relevant information, could lead to major mission degradation. Therefore, all replacement parts offered shall be only “official brand” (OEM) parts.

A DESCRIPTION OF EFFORTS MADE TO ENSURE THAT QUOTATIONS OR OFFERS ARE SOLICITED FROM AS MANY POTENTIAL SOURCES AS PRACTICABLE (INCLUDE YOUR MARKET RESEARCH EFFORTS HERE). Researched the Internet for vendors available to provide the various waterjet propulsion parts, Marine Jet Power, is the suggested source that can provide the various waterjet propulsion parts installed. Searched for other vendors capable of supplying the various waterjet propulsion parts.

While other vendors produce various waterjet propulsion parts, to deviate from the installed brand may require fabrication upon installation.

REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES.

Marine Jet Power is the suggested source that can provide the various waterjet propulsion parts to support the installed equipment.

Marine Jet Power is the sole possessor of the drawings and other technical information required to properly manufacture the various waterjet propulsion parts. Another vendor’s parts may not contain the same fit, form and function. The installation of Marine Jet Power parts will ensure the continuity and configuration of the various waterjet propulsion parts installed at Coast Guard units. The Coast Guard does not have any technical information to deviate from the parts installed; another vendor’s offer may lead to fabrication being necessary for installation.

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE. This is a proprietary commercial item of the proposed contractor. The reproduction of manufacturing drawings, specifications and other technical data related to this item were never purchased by the U.S. Coast Guard and therefore are controlled by and remain the sole property of the OEM.

PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED. COR will continue to conduct market research in the attempt to locate vendors that can satisfy the needs of the Coast Guard including a requirement for manufacturer’s engineering drawings, detailed parts lists, design or testing procedures, and other relevant information concerning this item.

SIGNATURE AND TITLE OF CUSTOMER

CODE

TELEPHONE

NUMBER

DATE

SIGNATURE OF CONTRACTING OFFICER CODE TELEPHONE

NUMBER

DATE

March 8, 2023 Version