M67861-19-Q-0009_Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

M6786119Q0009 16-Jan-2019

b. TELEPHONE NUMBER

504-697-9026

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 30 Jan 2019

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M678619. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

SGT ZACHARY SNODGRASS

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M2638119RC00005

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MARFORRES REGIONAL CONTRACTING OFFICE

MFR RCO

2000 OPELOUSAS AVE

NEW ORLEANS LA 70114

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M26381 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

MARINE FORCES RESERVE- G6

SGT MELISSA MARTENS

2000 OPELOUSAS AVE,

MFR G-6

NEW ORLEANS LA 70114

TEL: 504-697-9344 FAX:

FAX:

TEL: 504-697-8357

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,000

NAICS:

333316

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF95

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6786119Q0009

Section SF 1449 - CONTINUATION SHEET

INSTRUCTIONS TO OFFERORS

1 Synopsis: This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in FAR subarts 12.6 and 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate written solicitation will not be issued.

2 Brand Name or Equal Product: This is a Competitive Brand Name or Equal solicitation using FAR Subparts

12.6 and 13.5 procedures for a commercial Purchase Order of Canon EOS 5D Mark IV DSLR Camera, Panasonic

Memory Cards, G-Technology SSD electronic document storage, Zeiss Camera Lens, and other accessories.

Selected NAICS for this requirement will be 333316 with a size standard of 1,000 Employees.

6 Small Business Set-aside: This requirement is set-aside to 100% to Small Business. The applicable NAICS is

333316 and the size standard is 1,000 Employees. SBA has issued a NMR Class Wavier for NAICS 333316 and

PSC Code 3610 as detailed in FAR 19.102(f).

7 Market Research: Market research conducted via the World Wide Web (WWW), GSA Advantage, SEWP, etc.

revealed that there is a reasonable expectation of obtaining two or more responsible offers from small business concerns. The decision was made to solicit as a 100% Total Small Business Set-Aside allowing for open market and

GSA schedule pricing. FAR Part 19.502-2 (a) Each acquisition of supplies or services that has an anticipated dollar value exceeding $3,000 but not over $150,000 is automatically reserved exclusively for small business concerns and should be set aside for small business unless the contracting officer determines there is not a reasonable expectation of obtaining offers from two or more responsible small business concerns that are competitive in terms of market prices, quality, and delivery. Marine Forces Reserve Small Business Program Deputy Director concurs with this action.

QUOTATION INSTRUCTIONS

8Quotations/bids/attachments should be submitted as a pdf document via email to Zachary.Snodgrass@usmc.mil and copy Shelley.Mentzos@usmc.mil. Each email may not exceed 5MB in size due to server/network restrictions. Submit multiple emails if necessary to ensure timely receipt of your bid. Only pdf email attachments are authorized. Any other email attachment types will be rejected by this agencies servers. All bids should include an overall total price in addition to individual pricing by contract line item (CLIN) 9All responsible sources may submit a quotation which, if received in a timely manner, should be considered by the agency.

10 Award will be made to the lowest-priced technically acceptable (LPTA) offer. The Technical Evaluation

Template that will be used to evaluate the LPTA bid is incorporated herein for Contractor awareness only. See

FAR 52.212-2 herein for technical evaluation procedures.

11 The Government will accept OPEN MARKET and GSA SCHEDULE PRICING.

12 The Government will consider brand name or equal bids only. Descriptive literature/brochures and software/hardware authorized to operate on USMC-N00027-NGEN-U Network required with all quotes bidding equal.

13 Method of Invoicing/Payment: Wide Area Workflow (WAWF) DFARS 252.232-7006 WAWF Instructions.

14 Any direct customer contact by Bidders is not authorized during the solicitation phase or your bid may be at risk of being eliminated from consideration for this solicitation.

15 NO PHONE CALLS will be accepted regarding this solicitation. ALL QUESTIONS should be sent in writing via email to Zachary.Snodgrass@usmc.mil and copy Shelley.Mentzos@usmc.mil.

17 The Contracting Officer may review Past Performance Information Retrieval System (PPIRS) for responsibility determination purposes.

18 The Government reserves the right to make award solely on initial quotes received on an all or none basis or on a multiple award basis. If a partial award will not be accepted, so state on the face of your bid.

mailto:Shelley.Mentzos@usmc.mil mailto:Zachary.Snodgrass@usmc.mil

19 Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation.

INSTRUCTIONS TO BE CONSIDERED RESPONSIVE TO THIS SOLICITATION

20 Bidders should include and comply with all remaining numbered instructions to Offerors:

21 CAGE code 22 DUNS number 23 Address 24 Point of contact 25 Delivery lead time after receipt of order for supplies and period of performance for services if different than listed in the solicitation document. List by line item if the delivery lead time differs from one line item to another. This should be visible on the face of the quote and not incorporated as a link or other attachment.

26 Prompt payment/discount terms (if offered). This will not be used to evaluate offers.

27 Contract number and expiration date should be included if bidding under a GSA, SEWP or other contract. This should be listed per line item unless the contract vehicle is applicable to all line items.

28 Manufacturer Part Number and Contractor Part Number (if different).

29 Supply product descriptive literature or certification statement that the proposed product or service meets all salient characteristics listed in this solicitation and the Technical Evaluation Template provided with the solicitation.

33 Brand Name or Equal Bids: All responses to this solicitation should indicate whether the firm is offering a

‘brand name manufacturer's products’ or ‘equal products.’ Descriptive literature is required with all quotes. Firms should submit sufficient descriptive literature to permit the contracting agency to assess whether the product proposed meets all the salient characteristics specified in the solicitation in accordance to the Lowest Priced

Technically Acceptable Template included/attached to this solicitation. Firms offering "equal" items should provide the make, model, description of the items, proof software/hardware authorized to operate on USMC-

N00027-NGEN-U Network, and product literature/brochures. This agency will not be responsible for locating or obtaining any information not included on the face of the offer or a hardcopy attachment to the offer in a response to this solicitation.

34 Software End User Licensing Agreements (EULA)/Warranty Support: All Government software contracts are required to include warranty provisions from authorized sellers/resellers of all commercial and non-commercial publisher software products. The Government will not accept any seller/reseller disclaimers of implied publisher standard commercial warranty or automatic renewals. As a minimum software warranties should cover the performance of all required product capabilities, free from defects/bugs, for all intended authorized users, process for reporting/fixing defects remedied at no charge to the Government, effective after Government tests of delivered software product(s), and include the seller/reseller's return policy and procedures.

36 Subscription/Warranty Support: If subscription maintenance support is expired, Offeror’s should specify the actual manufacturer’s subscription term dates for each line item of the offer citing ‘reinstatement’ (if applicable) for any expired/overdue line items along with correct support term dates (i.e. Reinstatement for overdue renewal for term MM/DD/YYYY – MM/DD/YYYY). Option year support renewals should be consecutive from base year for a full 12-months at the manufacturer’s dictated support term dates. This paragraph is not applicable to bidders bidding an equal product.

40 Gray Products: In order to minimize the risk of the Government purchasing counterfeit products or unauthorized secondary market equipment, which would not be supported by the Original Equipment Manufacturer (OEM), and to ensure that the Government purchases only equipment that is genuine (i.e., not counterfeit or gray market), authorized (e.g., including appropriate licenses), and supported (e.g., warranty and support services) by the OEM, Offeror should certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirements. Unless otherwise specified, Offeror should warrant that the products are new, in their original box. By submitting a response to an Request for Quote (RFQ), Request for Proposal (RFP), the Offeror confirms to have sourced all

Manufacturer products submitted in this offer from Manufacturer or through Manufacturer Authorized Partners only, in accordance with Manufacturer's applicable policies in effect at the time of purchase. Offeror should provide

Buyer with a copy of the End User license agreement, and should warrant that all Manufacturer software is licensed originally to Buyer as the original licensee authorized to use the Manufacturer Software.

45 Complete the Following Clauses/Attachments/Table/Etc:

[Provisions/Clauses requiring completion] Bidders should complete the following provision/clause listed in this solicitation: DFARS 252.239-7009. FAR clauses can be completed manually within this solicitation or printed and completed manually by copying and pasting provision/clause from this link:

http://farsite.hill.af.mil/VFFARA.HTM).

46 Solicitation/Contract Line Item Numbers (CLIN) Structure – Potential bidders should submit bids in the same

CLIN structure as outlined in the solicitation for bid evaluation purposes. However, an alternate line item structure can be submitted as an additional attachment consolidating like line items and pricing for award consideration.

47Assignment of Claims – Potential bidders that may need an Assignment of Claims as described in FAR 32.8

(copy/paste link into web browser: http://farsite.hill.af.mil/VFFARA.HTM) should include a statement on bid that

"Assignment of Claims is required if selected for award." Assignment of Claims will not be used as an evaluation factor for award. However, all Assignment of Claims documentation should be submitted with bid or provided

BEFORE accepting award for Contracting Officer determination. The Government reserves the right to disapprove a request for Assignment of Claims; vendor will be advised of disapproval prior to drafting of award so vendor may determine if it can still fulfill the contractual requirement without an Assignment of Claims. If request for

Assignment of Claims is not included in bid or required documentation is not provided PRIOR to Contractor acceptance of award, the Contracting Officer may reject request for Assignment of Claims and award to the next qualified offeror.

48 System for Award Management (SAM.gov) – Potential bidders not currently registered at SAM.gov should register (including completion of certifications and representations) to be considered for award. Registration may take several days to be visible at SAM.gov, therefore, affected bidders should provide proof of registration/date with bid submittal. Contact SAM.gov website points of contact if you need assistance with registration.

SALIENT CHARACTERISTICS

CLIN 0001

SanDisk Extreme Pro SDXC 256GB Memory Card Requirements

General

Card Type - SDXC

Storage Capacity – 256 GB

Speed Class - 10

UHS Speed Class – U3

Speed (X-rating) – 633x

Bus Interface Speed – UHS Class I

Data Transfer – Read Speed (95 MB/s max), Write Speed (90 MB/s max, 30MB/s min)

Durability – Shockproof, temperature extremes, waterproof, x-ray proof

Operating Temperature - -13 to 185 degrees F

CLIN 0002

SanDisk Extreme Pro 256GB Compact Flash Memory Card Requirements http://farsite.hill.af.mil/VFFARA.HTM

Card Type – CompactFlash Type I

Ultra Direct Memory Access (UDMA) – UDMA 7 Compliant

Video Performance Guarantee – VPG-65

Speed (X-rating) – 1067x

Data Transfer – Read Speed (160 MB/s max), Write Speed (140 MB/s max)

Durability – Shockproof, temperature extremes

Operating Temperature – (-)13 to 185 degrees F

CLIN 0003

SanDisk Extreme 256GB microSDXC Memory Card Requirements

Card Type - microSDXC

Speed Class - 10

UHS Speed Class – U3

Application Performance Class – A1

Bus Interface Speed – UHS Class I

Data Transfer – Read Speed (100 MB/s max), Write Speed (90 MB/s max, 30MB/s min)

Durability – Shockproof, temperature extremes, waterproof, x-ray proof

Operating Temperature – (-)13 to 185 degrees F

CLIN 0004

Panasonic 256GB B Series expressP2 Memory Card Requirements

Card Type – P2

Supports 4K recording

Speed (X-rating) – 1067x

Data Transfer – Up to 10 Gbps

Durability – Shockproof, temperature extremes

CLIN 0005

SanDisk Extreme Pro SDXC 128GB Memory Card Requirements

Speed Class - 10

UHS Speed Class – U3

Speed (X-rating) – 1733x

Bus Interface Speed – UHS Class II

Data Transfer – Read Speed (300 MB/s max), Write Speed (260 MB/s max, 30MB/s min)

Durability – Shockproof, temperature extremes, waterproof, x-ray proof

Operating Temperature – (-)13 to 185 degrees F

CLIN 0006

SanDisk Extreme Pro 128GB microSDXC Memory Card Requirements

Speed Class - 10

UHS Speed Class – U3

Bus Interface Speed – UHS Class II

Data Transfer – Read Speed (275 MB/s max), Write Speed (100 MB/s max, 30MB/s min)

Durability – Shockproof, temperature extremes, waterproof, x-ray proof

Operating Temperature – (-)13 to 185 degrees F

CLIN 0007

G-Technology G-DRIVE Mobile SSD Requirements

Connection Interface – 1 x Thunderbolt 3 (USB Type-C)

Storage Type – Solid-State Drive

UHS Speed Class – U3

Bus Interface Speed – UHS Class II

Data Transfer – Read Speed (2800 MB/s max), Write Speed (100 MB/s max, 30MB/s min)

Durability – Shockproof, crushproof, water resistant, dust resistant

CLIN 0008

G-Technology 16TB G-SPEED Shuttle 8-Bay Thunderbolt3 SSD RAID Array Requirements

Connection Interface – 2 x Thunderbolt 3 (USB Type-C)

Storage Capacity – 16 TB (8x2TB)

Storage Type – Solid-State Drive

OS Compatibility – macOS 10.12+ / Windows 10, 7 (via reformat)

Data Transfer Rate – Up to 2800 MB/s

Hardware RAID Controller

Configured as RAID 5

CLIN 0009

G-Technology 7.68TB G-DRIVE Pro SSD Requirements

Connection Interface – 2 x Thunderbolt 3 (USB Type-C)

Storage Capacity – 7.68 TB

Storage Type – Solid-State Drive

OS Compatibility – macOS 10.13+ / Windows 10, (via reformat)

Data Transfer Rate – Up to 2800 MB/s

CLIN 0010

Xcellon Portable USB 3.0 Card Reader Requirements

Compatible with SD/SDHC/SDXC Cards (104 MB/s)

Compatible with microSD/SDHC/SDXC Cards (104 MB/s)

USB 3.0 Type-A Interface

Natively Supports the UHS-I Bus

Thumb-Sized & Pocketable

Windows, Mac, Linux & Android Compatible

CLIN 0011

LG 8x Super-Multi Portable DVD Rewriter with M-Disc Requirements

Max 8X DVD± Write Speed

Max 24X CD Write Speed

M-Disc Support

Connects Via USB 2.0

Supports Double Layer DVD+R Discs

Supports Dual Layer DVD-R Discs

0.75MB Memory Buffer

Support for Power Saving & Sleep Modes

CLIN 0012

Sony 1000XM2 Wireless Noise-Canceling Headphone Requirements

40mm Drivers

Adaptive, Personalized Noise Canceling

Flight Noise Cancellation Profile

Bluetooth 4.1 with LDAC

Built-In Touch Controls

Equalizer and Virtual Surround Sound

Hi-Res Audio with S-Master HX & DSEE HX

Up to 30 Hours of Battery Life with ANC

Sony | Headphones Connect App

Includes Cable, Case, Flight Adapter

CLIN 0013

Think Tank Photo Airport Rolling Carry-on Camera Bag Requirements

B&H # THA4RDB MFR # 730514

Holds 2 DSLRs / 5-8 Lenses / 1-2 Flashes

Holds 15" Laptop and Tablet

Can Hold 400mm f/2.8

Eight Wheels, Retractable Handle

Lock and Cable

Top & Side Grab Handles

Side-Rolling Feature for Airplane Aisles

Reinforced Back Panel

Tripod Mount

Rain Cover Included

CLIN 0014

ZEISS 77mm Carl ZEISS T* UV Filter Requirements

B&H # ZEUVF77 MFR # 1933-986

Absorbs Ultraviolet Light

Reduces Bluish Cast of Daylight

General Protective Filter

T* Anti-Reflective Coating

Slim Profile Filter Ring

High Quality Glass Construction

77mm circular size, 77mm front accessory thread/bayonet

CLIN 0015

ZEISS 86mm Carl ZEISS T* UV Filter Requirements

B&H # ZEUVF86 MFR # 2101-665

Absorbs Ultraviolet Light

Reduces Bluish Cast of Daylight

General Protective Filter

T* Anti-Reflective Coating

Slim Profile Filter Ring

High Quality Glass Construction

86mm circular size, 86mm front accessory thread/bayonet

CLIN 0016

ZEISS 95mm Carl ZEISS T* UV Filter Requirements

B&H # ZEUVF95 MFR # 1970-245

Absorbs Ultraviolet Light

Reduces Bluish Cast of Daylight

General Protective Filter

T* Anti-Reflective Coating

Slim Profile Filter Ring

High Quality Glass Construction

95mm circular size, 95mm front accessory thread/bayonet

CLIN 0017

ZEISS Otus ZE Bundle with 28mm, 55mm, and 85mm Lenses for Canon EF Requirements

B&H # ZEOZELB1 MFR # 2270-684

Otus 28mm f/1.4 ZE Lens

Otus 55mm f/1.4 ZE Lens

Otus 85mm f/1.4 ZE Lens

Otus Transport Case

3x Lens Gears

Otus Distagon T* Lens for Canon EF Mount, a standard focal length premium lens optimized for full-format DSLR camera sensors, specifically, Canon.

CLIN 0018

Sigma 70-200mm f/2.8 EX DG APO OS HSM for Canon EF Requirements

B&H # SI7020028CQ MFR # 589101

EF-Mount Lens/Full-Frame Format/35mm Film/Canon (APS-C)

Aperture Range: f/2.8 to 22

Two FLD Elements, 3 SLD Elements

Super Multi-Layer Lens Coating

Fast & Quiet Hyper-Sonic Motor (HSM)

Auto and Manual Focus

Up to 4 Stops of Optical Stabilization

55.1" Close Focusing Distance

Lens Hood & Tripod Collar

Focal Length: 70-200mm

Angle of View: 34.3 – 12.3 degrees

CLIN 0019

Canon EOS 5D Mark IV DSLR Camera with Canon Log Requirements

B&H # CAE5D4CL MFR # 1483C082

30.4MP Full-Frame CMOS Sensor

DIGIC 6+ Image Processor

DCI 4K Video at 30 fps; 8.8MP Still Grab

Canon Log Gamma; View Assist Function

3.2" 1.62m-Dot Touchscreen LCD Monitor

61-Point High Density Reticular AF

Native ISO 32000, Expanded to ISO 102400

Dual Pixel RAW; AF Area Select Button

Dual Pixel CMOS AF and Movie Servo AF

7 fps Shooting; CF & SD Card Slots

Lens Mount Canon EF

Camera Format Full-Frame (1.0x Crop Factor)

Pixels Actual: 31.7 Megapixel / Effective: 30.4 Megapixel

Max Resolution 30.4 MP: 6720 x 4480

Aspect Ratio 1:1, 3:2, 4:3, 16:9

Sensor Type / Size CMOS, 36 x 24 mm

File Formats Still Images: JPEG, RAW / Movies: MJPEG, MOV, MP4, MPEG-4 AVC/H.264 / Audio:

AAC, Linear PCM (Stereo)

Bit Depth 14-Bit

Dust Reduction System Yes

Memory Card Type CompactFlash, SDXC, SDHC, SD

Focus Type Autofocus

Focus Mode Continuous-Servo AF (C), Manual Focus (M), Single-servo AF (S)

Autofocus Points Phase Detection: 61 (41 Cross-Type)

Viewfinder Type Pentaprism

Viewfinder Eye Point 21.00 mm

Viewfinder Coverage 100%

Viewfinder Magnification Approx. 0.71x

Diopter Adjustment -3 to +1 m

Display Screen 3.2" Rear Touchscreen LCD (1,620,000)

Screen Coverage 100%

Diagonal Angle of View 170.0°

ISO Sensitivity Auto, 100-32000 (Extended Mode: 50-102400)

Shutter Type: Electronic & Mechanical / Speed: 30 - 1/8000 Second , Bulb Mode

Remote Control TC-80N3, RS-80N3 (Optional)

Mirror Lock-Up Yes

Metering Method Evaluative Metering, Partial Metering, Spot Metering

Exposure Modes Modes: Aperture Priority, Auto, Manual, Programmed Auto, Shutter Priority / Metering

Range: EV 0.0 - EV 20.0 / Compensation: -5 EV to +5 EV (in 1/3 EV Steps)

Buffer/Continuous Shooting Up to 7 fps at 30 MP for up to 21 Frames in Raw Format / Up to 7 fps at 30

MP for Unlimited Frames

White Balance Modes Auto, Cloudy, Color Temperature, Custom, Daylight, Flash, Fluorescent (White), Shade, Tungsten

Video Recording Yes, NTSC/PAL

File Size 4096 x 2160p / 1920 x 1080p / 1280 x 720p

Video Format 4096 x 2160p at 23.98/24/29.97 fps (500 Mb/s M-JPEG) / 1920 x 1080p at 59.94 fps (180

Mb/s MOV) / 1920 x 1080p at 23.98/24/29.97 fps (90 Mb/s MOV) / 1920 x 1080p at 59.94 fps (60 Mb/s

MOV) \ 1920 x 1080p at 23.98/24/29.97 fps (30 Mb/s MOV) / 1280 x 720p at 120 fps (160 Mb/s MOV) /

1920 x 1080p at 59.94 fps (60 Mb/s MP4) / 1920 x 1080p at 23.98/24/29.97 fps (30 Mb/s MP4) / 1920 x

1080p at 29.97 fps (12 Mb/s MP4)

Exposure Control Auto: Shutter Speed, Aperture, ISO / Manual: Shutter Speed, Aperture, ISO

ISO Sensitivity Auto, 100 - 32000

Exposure Compensation -3 EV to +3 EV (in 1/3 or 1/2 EV steps)

Focus Auto/ManualContinuous Auto

Max Video Clip Length 4096 x 2160: 29 Minutes, 59 Seconds

Audio Recording Built-In Mic: With Video (Mono) / Optional External Mic: With Video (Stereo)

Start-up Time 0.1 seconds

Shutter Lag 0.058 seconds

Self Timer 10 Seconds, 2 Seconds

Interval Recording Yes

Connectivity 1/8" Headphone, 1/8" Microphone, Canon N3, HDMI C (Mini), USB 3.0

Wi-Fi Capable Yes

Battery 1 x LP-E6N Rechargeable Lithium-Ion Battery Pack, 7.2 VDC, 1865 mAh

AC Power Adapter ACK-E6 (Optional)

Operating/Storage Temperature - Operating 32 to 104°F (0 to 40°C)

Humidity: 0 - 85%

CLIN 0020

Canon LP-E6N Lithium-Ion Battery Pack (7.2V, 1865mAh) Requirements

B&H # CALPE6N / MFR # 9486B002

Compatible with Canon EOS 7D Mark II, 7D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 60D, 60Da, 70D, 80D, 6D, and 6D Mark II Cameras

Amp-Hours 1865 mAh

Chemistry Lithium-Ion

Output Voltage 7.2 VDC

Dimensions (W x H x D) 2.2 x 0.8 x 1.5" / 5.6 x 2.0 x 3.8 cm

Weight 2.8 oz / 79.4 g

CLIN 0021

Watson Duo LCD Charger with Two LP-E6 / LP-E6N Battery Plates Requirements

B&H # WADCNLPE6 MFR # D-1517

100-240 VAC Power for Worldwide Use

Charging Time: 2-6 Hours

USB 2.0 Port for Charging Other Devices

Two LP-E6 / LP-E6N Plates

Accepts Interchangeable Battery Plates

Digital Display of Charge Percentage

Includes Power Cord & 12 VDC Car Charger

AC Input Power 100 to 240 VAC, 50 / 60 Hz

DC Input Power 12 / 24 VDC at 2000 mA

Output Voltage 1.2 - 8.4 VDC, 2000 mA

Charging Time 2 to 6 Hour

USB Port 1 x USB Type-A

USB Output Current 2000 mA

Operating Temperature 32 to 104°F / 0 to 40°C

Storage Temperature -4 to 140°F / -20 to 60°C

Cable Length 56.4" / 140 cm

Dimensions (W x H x D) 4.9 x 4.5 x 1.8" / 12.4 x 11.4 x 4.5 cm

Weight 7.7 oz / 217 g

CLIN 0022

Canon BG-E20 Battery Grip for EOS 5D Mark IV Requirements

B&H # CABGE20 / MFR # 1485C001

Comfort and Control in Vertical Position

Vertical Position Shutter Release Button

Vertical Position Control Buttons

Holds Up to Two LP-E6/LP-E6N Batteries

Extends Shooting Time

Camera Alignment Pin Hole

Dust- and Water-Resistant Construction

Battery Type 2 x Battery Pack (LP-E6/LP-E6N))

Tripod Mounting Thread 1/4"-20

Dimensions (L x W x H) 6.0 x 4.5 x 3.3" / 15.2 x 11.4 x 8.3 cm

Weight 13.8 oz / 391.2 g

CLIN 0023

SanDisk ImageMate Pro USB 3.0 Reader Requirements

B&H # SAIPMCRW MFR # SDDR-489-A47

USB 3.0 Interface

Compatible with SD & microSD Cards

Compatible with CompactFlash Cards

Supports UHS-I, UHS-II, Non-UHS Cards

Up to 500 MB/s Data Transfer Rate

Memory Card Slots 1 x SD (Unspecified Type) (UHS-II [312 MB/s]) / 1 x microSD (Unspecified Type) /

UHS-II [312 MB/s]) / 1 x CompactFlash Type I

Host Connector 1 x USB Type-A (Male)

Host Computer Interface USB 3.0 (5 Gb/s)

CLIN 0024

Vanguard CK6N1 Cleaning Kit Requirements

B&H # VACK6N1 / MFR # CK6N1

Vanguard CK6N1 Cleaning Kit

Power Lens Cleaner (45mm Diameter, 165mm Length)

Microfiber Lens Cloth (11.75 x 11.75")

60 ml Cleaning Solution

Wet and Dry Lens Wipes

Polishing/Brush Tip

Carry Case

CLIN 0025

Sigma 24-70mm f/2.8 DG OS HSM Art Lens for Canon EF Requirements

B&H # SI247028EF / MFR # 576954

EF-Mount Lens/Full-Frame Format

Aperture Range: f/2.8 to f/22

Three SLD and Four Aspherical Elements

Super Multi-Layer Coating

Hyper Sonic AF Motor, Manual Override

Optical Stabilizer

Rounded 9-Blade Diaphragm

TSC Material, Brass Bayonet Mount

Compatible with Sigma USB Dock

Focal Length 24 - 70mm

Aperture Maximum: f/2.8 / Minimum: f/22

Camera Mount Type Canon EF

Format Compatibility 35mm Film / Full-Frame Digital Sensor

Angle of View 84.1° - 34.3°

Minimum Focus Distance 1.21' / 37 cm

Maximum Reproduction Ratio 1:4.8

Optical Design 19 Elements in 14 Groups

Diaphragm Blades 9, Rounded

Image Stabilization Yes

Autofocus Yes

Filter Thread Front: 82 mm

Dimensions (DxL) Approx. 3.46 x 4.24" / 88 x 107.6 mm

Weight 2.24 lb / 1020 g

CLIN 0026

Chiaro 77mm 99-UVBTS Brass UV Filter Requirements

B&H # CHT99UVBTS77 / MFR # 99-UVBTS77

99% Light Transmission

Clear UV Protective Filter

Polished Schott Glass

Scratch Resistant

Water, Oil, Dust, Fingerprint-Resistant

Slim Brass Filter Ring

Top & Side Knurling

Filter Type UV

Filter Factor 1 (+0 Stop)

Shape Circle

Circular Size 77 mm

Rotating No

Front Accessory Thread / Bayonet 77 mm

Filter Thickness 0.13" / 3.2 mm

Physical Feature Slim

Filter Material Glass

Ring Material Brass

Knurling Side, Top

Coatings Multi-Coating, Resistance Coating

CLIN 0027

General Brand 82mm UV Protector Filter Requirements

B&H # GBUV82 / MFR # 82UVP

Helps to Absorb Ultraviolet Light

Reduces Bluish Cast of Daylight

General Protective Filter

ColorCore Technology

Filter Type UV

Filter Factor 1 (+0 Stop)

Shape Circle

Circular Size 82 mm

Front Accessory Thread / Bayonet 82 mm

CLIN 0028

Sigma 18-35mm f/1.8 DC HSM Art Lens for Canon EF Requirements

B&H # SI183518DCC / MFR # 210-101

Canon EF-Mount Lens/APS-C Format

28.8-56mm (35mm Equivalent)

Aperture Range: f/1.8 to f/16

Four Aspherical, Five SLD Glass Elements

Super Multi-Layer Coating

Hyper Sonic AF Motor

Internal Focusing and Zoom Design

Compatible with Sigma USB Dock

Focal Length 18 - 35mm

Comparable 35mm Focal Length: 28.8 - 56 mm

Aperture Maximum: f/1.8

Minimum: f/16

Camera Mount Type Canon EF

Format Compatibility Canon (APS-C)

Angle of View 73.8° - 42.2°

Minimum Focus Distance 11" / 27.94 cm

Maximum Reproduction Ratio 1:4

Optical Design 17 Elements in 12 Groups

Diaphragm Blades 9

Image Stabilization None

Autofocus Yes

Filter Thread Front: 72 mm

Dimensions (DxL) Approx. 3.07 x 4.76" / 78 x 121 mm

Weight 1.78 lb / 811 g

CLIN 0029

Chiaro 72mm 99-UVBTS Brass UV Filter Requirements

B&H # CHT99UVBTS72 / MFR # 99-UVBTS72

99% Light Transmission

Clear UV Protective Filter

Polished Schott Glass

Scratch Resistant

Water, Oil, Dust, Fingerprint-Resistant

Slim Brass Filter Ring

Top & Side Knurling

Filter Type UV

Filter Factor 1 (+0 Stop)

Shape Circle

Circular Size 72 mm

Rotating No

Front Accessory Thread / Bayonet 72 mm

Filter Thickness 0.13" / 3.2 mm

Physical Feature Slim

Filter Material Glass

Ring Material Brass

Knurling Side, Top

Coatings Multi-Coating, Resistance Coating

CLIN 0030

ikan Flex Dual Handle Stabilizer for Beholder Gimbal Requirements

B&H # IKFHS / MFR # FHS

Compatible with Ikan Beholder gimbals

Enhances stabilization on the vertical axis

Adjustable tension springs allow a payload between 1.8 lbs to 15.8lbs

Works with most gimbals with a 3/8"-16 threaded mount on their base

Comfortable grip handles help reduce fatigue and loss of grip

Build Material: Aluminum

Compatible With: Beholder Gimbals

Dimensions: 13 x 6.5 x 3 in.

Shipping Dimensions: 11 x 8.5 x 1.7 in.

Shipping Weight: 3 lbs

UPC Code: 847983023127

Weight : 1.83 lbs

CLIN 0031

CAME-TV Orbit Two Mounting Ring for Optimus & Prophet 3-Axis Gimbals Requirements

B&H # CAORBIT2 / MFR # ORBIT-2

The Orbit Two mounting ring has been designed to be used with the Optimus and Prophet 3-axis gimbals.

Simply mount the CAME-TV OPTIMUS or PROPHET gimbal to the Orbit Two, and you'll then have a rig that can act as a stand, complete with built-in lockable swing-out legs on the base. With features such as a top handle, and rubberized grips on the side, the Orbit Two provides numerous ways to hold and support your gimbal, so you can quickly grab it and start shooting. There are also holes on the top tubing that allow for the mounting of a variety of accessories such as an external monitor, microphone, or lights.

CLIN 0032

CAME-TV Dual Handles for Optimus and Prophet Gimbals Requirements

General

B&H # CAOPHANDS / MFR # OP-HANDS

Provides smooth camera panning and tilt motions

Tool less adjustment

Can be configured as a stand

The Dual Handle for Optimus and Prophet provide gimbal operators smooth camera panning and tilt motions. The tool-less adjustment of the handles provide easy configuration of the desired operating angle and spacing. The handles can also be configured to act as a stand when the handles are positioned right angled to the cross bar. The versatility of the handles allows for stability in while in use and easily converts to a stand for resting and storage.

CLIN 0033

CAME-TV Prophet2 4-in-1 Handheld Gimbal Stabilizer with Detachable Head 6.6 Pound Payload Requirements

B&H # CAPROPHET2 / MFR # PROPHET-2

6.6 lb Load Capacity

32-Bit Alexmos Control Board

Tool-Less Balance Adjustment System

Wireless Joystick Remote

Detachable Handgrip

Wireless Video Transmitter

Hard Case

CLIN 0034

Sachtler System FSB 6 Fluid Head with Touch & Go Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level

Spreader and Rubber Feet Requirements

B&H # SA0465 MFR # 0465

FSB 6 Fluid Head with Touch & Go Plate

Head with Load Capacity of 3.3 to 17.6 Pounds

For Camcorders, DSLRs & Mirrorless

10-Step Counterbalance

Flowtech 75 Carbon Fiber Legs

Two-Stage, Three-Section Standard Legs

Tripod Supports up to 44 Pounds

Height Range Approximately 24 to 61"

Removable Mid-Level Spreader

Padded Carry Bag

0405 FSB-6T Fluid Head o Load Capacity 3.3 to 17.6 lb (1.5 to 8 kg) o Diameter/Thread 75mm o Counter Balance System 10 steps o Quick Release/Wedge Plate Yes o Balance Plate Yes, 2.4" (60mm) Sliding Range o Tilt Range -70 to +90° o Tilt Drag 3 Steps plus Zero o Tilt Lock Yes o Pan Range 360° o Pan Drag 3 Steps plus Zero o Pan Lock Yes o Leveling Bubble/Illuminated Yes / Yes o Temperature Range -40 to +140°F (-40 to +60°C) o Weight 4.7 lbs (2.15kg)

Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet o Leg Stages/Sections 2-stage (3-section) o Height Range With Mid-Level Spreader: 24.8 - 61.81" / 63 - 157 cm Without Mid-Level

Spreader: 10.24 - 60.24" / 26 - 153 cm o Collapsed Height 26.8" / 68 cm o Load Capacity 44 lb / 20 kg o Head Attachment Fitting 75 mm bowl o Material Legs: Carbon fiber / Head Attachment Fitting: Aluminum o Leg Lock Type Lever clamp o Weight 6.4 lb / 2.9 kg

CLIN 0035

Rode VideoMic Pro Plus On-Camera Shotgun Microphone Requirements

B&H # ROVMPP / MFR # VMP+

For DSLRs, Camcorders & More

Improved RF-Immunity Over Previous Model

20 Hz to 20 kHz Frequency Response

Rycote Lyre Shockmount

3.5mm Mini-Jack Output, Dual Mono Output

Right Channel Can Act as Safety Channel

Selectable HPF and High-Frequency Boost

Includes Rechargeable Li-Ion Battery

Battery Lasts Over 100 Hours

Includes Micro-USB & TRS Cables

Acoustic Principle Line gradient

Directional Pattern Supercardioid

Frequency Range 20 Hz to approximately 20 kHz

High-Pass Filter Selectable at 75 Hz, 150 Hz

Sensitivity -33.6 dB re 1 V/Pa (21.2 mV at 94 dB SPL) ±2 dB at 1 kHz

Output Impedance 200 Ohms

Equivalent Noise 14.2 dBA SPL

Maximum Output 7.72 dBu (at 1 kHz, 1% THD into 1 kOhm)

Dynamic Range 118.8 dB

Maximum SPL 133 dB SPL

Signal to Noise Ratio 79.8 dB

Power Options LB-1 RØDE custom lithium-ion rechargeable battery (~12 mA current draw) 2 x AA batteries (~17 mA current draw), or via micro-USB port

Battery Life LB-1 Battery Life: Over 100 hours

Battery Charger Micro-USB cable (supplied)

Output Connection Dual mono unbalanced on stereo 1/8" / 3.5 mm jack

Dimensions 6.7 x 4.4 x 2.6" / 170.0 x 111.0 x 66.0 mm

Weight 4.3 oz / 122 g

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 20 Each

SANDISK EXTREME PRO SDHC 256GB

FFP

SANDISK EXTREME PRO SDHC 256GB

FOB: Destination

MILSTRIP: M2638119RC00011

PURCHASE REQUEST NUMBER: M2638119RC00005

PSC CD: 6760

NET AMT

0002 20 Each

SANDISK 256GB EXTREME PRO CF CARD

FFP

SANDISK 256GB EXTREME PRO CF CARD (160MB/S)/REG SAEPCF256GB

FOB: Destination

MILSTRIP: M2638119RC00011

0003 20 Each

SANDISK EXTREME MICROSD 256GB

FFP

SANDISK EXTREME MICROSD 256GB - 100MBS/ V30/REG

SAEMSD256A1G

FOB: Destination

MILSTRIP: M2638119RC00011

0004 6 Each

PANASONIC P2 MEMORY CARD

FFP

PANASONIC B SERIES EXPRESS P2 MEMORY CARD- 256GB/REG

PAAUXP256B

FOB: Destination

MILSTRIP: M2638119RC00011

0005 20 Each

SANDISK EXTREMEPRO UHS-II 128GB SD

FFP

SANDISK EXTREMEPRO UHS-II 128GB SD- 300R/ 260W/REG

SAEPSDU128GA

FOB: Destination

MILSTRIP: M2638119RC00011

0006 20 Each

SANDISK 128GB XTRM PRO MCRSDXC CRD

FFP

SANDISK 128GB XTRM PRO MCRSDXC CRDUSB 3.0 RDR/REG

SAEPMSD128GB

FOB: Destination

MILSTRIP: M2638119RC00011

0007 20 Each

1TB G-DRIVE MOBILE PRO SSD

FFP

G-TECHNOLOGY 1TB G-DRIVE MOBILE PRO SSD/ TB3/REG GT0G10311

FOB: Destination

MILSTRIP: M2638119RC00011

0008 6 Each

G-SPD SHUTTLE TB3 16TB/SSD

FFP

G-TECHNOLOGY G-SPD SHUTTLE TB3 16TB/SSD 4-BAY- BL/REG

GT0G10193

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119RC00011

0009 10 Each

7.680GB G-DRIVE PRO SSD

FFP

G-TECHNOLOGY 7680GB G-DRIVE PRO SSD THUNDERBOLT 3/REG

GT0G10290

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119RC00011

0010 16 Each

XCELLON PORTABLE USB 3.0 CARD READER/REG

FFP

XCELLON PORTABLE USB 3.0 CARD READER/REG XCCRP10

FOB: Destination

MILSTRIP: M2638119RC00011

0011 20 Each

LG DVD SLIM PORTABLE DIGITAL STORAGE/REG

FFP

LG DVD SLIM PORTABLE DIGITAL STORAGE/REG LGGP60NB50

FOB: Destination

MILSTRIP: M2638119RC00011

0012 10 Each

SONY 1000XM2 WRLS NOISE CANCELNG HDPHNS-BLK/REG

FFP

SONY 1000XM2 WRLS NOISE CANCELNG HDPHNS-BLK/REG

SOWH1000XM2B

FOB: Destination

MILSTRIP: M2638119RC00011

0013 6 Each

THINK AIRPORT 4-WHEEL ROLLING DERBY BAG

FFP

THINK AIRPORT 4-WHEEL ROLLING DERBY BAG/REG THA4RDB

FOB: Destination

MILSTRIP: M2638119RC00011

0014 1 Each ZEISS CZ T* UV FILTER - 77mm/REG

FFP

ZEISS CZ T* UV FILTER - 77mm/REG ZEUVF77

FOB: Destination

MILSTRIP: M2638119RC00013

0015 1 Each ZEISS CZ T* UV FILTER - 86mm/REG

FFP

ZEISS CZ T* UV FILTER - 86mm/REG ZEUVF86

FOB: Destination

MILSTRIP: M2638119RC00011

0016 1 Each ZEISS CZ T* UV FILTER - 95mm/REG

FFP

ZEISS CZ T* UV FILTER - 95mm/REG ZEUVF95

FOB: Destination

MILSTRIP: M2638119RC00011

0017 1 Each

ZEISS OTUS ZE BND

FFP

ZEISS OTUS ZE BND w/28/55/85mm LENS f/CAN EF/REG ZEOZELB1

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119RC00011

0018 16 Each SIGMA 70-200mm

FFP

SIGMA 70-200mm F2.8 EX DG OS HSM f/CANON/REG SI7020028CQ

FOB: Destination

MILSTRIP: M2638119RC00011

0019 16 Each CANON EOS 5D MARK IV CAM w/CANON LOG

FFP

CANON EOS 5D MARK IV CAM w/CANON LOG / CAE5D4CL

FOB: Destination

MILSTRIP: M2638119RC00011

0020 64 Each

CANON LP-E6N BATTERY

FFP

CANON LP-E6N BATTERY f/7D MARK II/REG CALPE6N

FOB: Destination

MILSTRIP: M2638119RC00011

0021 16 Each

WATSON DUO LCD CHARGER

FFP

WATSON DUO LCD CHARGER f/CANON LPE6/REG WADCNLPE6

FOB: Destination

MILSTRIP: M2638119RC00011

0022 16 Each

CANON BG-E20 BATTERY GRIP/REG

FFP

CANON BG-E20 BATTERY GRIP/REG CABGE20

FOB: Destination

MILSTRIP: M2638119RC00011

0023 16 Each

SANDISK IMAGEMATE PRO MULTICARD READER/WRITER/REG

FFP

SANDISK IMAGEMATE PRO MULTICARD READER/WRITER/REG

SAIPMCRW

FOB: Destination

MILSTRIP: M2638119RC00011

0024 25 Each

VANGUARD CK6N1 6-IN-1 CLEANING KIT/USA

FFP

VANGUARD CK6N1 6-IN-1 CLEANING KIT/USA VACK6N1

FOB: Destination

MILSTRIP: M2638119RC00011

0025 16 Each SIGMA 24-70mm LENS

FFP

SIGMA 24-70mm f/2.8 DG OS HSM ART LENS f/CAN/REG SI247028EF

FOB: Destination

MILSTRIP: M2638119RC00011

0026 60 Each CHIARO 77mm T99 UV-BTS (MC) FILTER/REG

FFP

CHIARO 77mm T99 UV-BTS (MC) FILTER/REG CHT99UVBTS77

FOB: Destination

MILSTRIP: M2638119RC00011

0027 60 Each GB 82mm UV PROTECTOR FILTER/REG

FFP

GB 82mm UV PROTECTOR FILTER/REG GBUV82

FOB: Destination

MILSTRIP: M2638119RC00011

0028 16 Each SIGMA 18-35mm F1.8 DC HSM LENS f/CANON/REG

FFP

SIGMA 18-35mm F1.8 DC HSM LENS f/CANON/REG SI183518DCC

FOB: Destination

MILSTRIP: M2638119RC00011

0029 60 Each CHIARO 72mm T99 UV-BTS (MC) FILTER/REG

FFP

CHIARO 72mm T99 UV-BTS (MC) FILTER/REG CHT99UVBTS72

FOB: Destination

MILSTRIP: M2638119RC00011

0030 6 Each

IKAN BEHOLDER FLEX HANDLE STABILIZER/REG

FFP

IKAN BEHOLDER FLEX HANDLE STABILIZER/REG IKFHS

FOB: Destination

MILSTRIP: M2638119RC00011

0031 6 Each CAME ORBIT TWO f/CAME-PROPHET/CAME-OPTIMUS/REG

FFP

CAME ORBIT TWO f/CAME-PROPHET/CAME-OPTIMUS/REG CAORBIT2

FOB: Destination

MILSTRIP: M2638119RC00011

0032 6 Each

CAME DUAL HANDLE FOR OPTIMUS AND PROPHET/REG

FFP

CAME DUAL HANDLE FOR OPTIMUS AND PROPHET/REG CAOPHANDS

FOB: Destination

MILSTRIP: M2638119RC00011

0033 6 Each CAME PRPH.4-I-1 GMBL PYLD 6.6LB w/DTCH HEAD/REG

FFP

CAME PRPH.4-I-1 GMBL PYLD 6.6LB w/DTCH HEAD/REG CAPROPHET2

FOB: Destination

MILSTRIP: M2638119RC00011

0034 6 Each SACHTLER FSB 6 TOUCHGO w/FT 75 CF TRIPOD w/MLS/REG

FFP

SACHTLER FSB 6 TOUCHGO w/FT 75 CF TRIPOD w/MLS/REG SA0465

FOB: Destination

MILSTRIP: M2638119RC00011

0035 8 Each

RODE VIDEOMIC PRO+

FFP

RODE VIDEOMIC PRO+ ON-CAMERA SHOTGUN MIC/REG ROVMPP

FOB: Destination

MILSTRIP: M2638119RC00011

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

0020 Destination Government Destination Government

0021 Destination Government Destination Government

0022 Destination Government Destination Government

0023 Destination Government Destination Government

0024 Destination Government Destination Government

0025 Destination Government Destination Government

0026 Destination Government Destination Government

0027 Destination Government Destination Government

0028 Destination Government Destination Government

0029 Destination Government Destination Government

0030 Destination Government Destination Government

0031 Destination Government Destination Government

0032 Destination Government Destination Government

0033 Destination Government Destination Government

0034 Destination Government Destination Government

0035 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 20 MARINE FORCES RESERVE- G6

SGT MELISSA MARTENS

2000 OPELOUSAS AVE,

MFR G-6

NEW ORLEANS LA 70114

504-697-9344

FOB: Destination

M26381

0002 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0003 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0004 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0005 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0006 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0007 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0008 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0009 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0010 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0011 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0012 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0013 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0014 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0015 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0016 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0017 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0018 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0019 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0020 30 dys. ADC 64 (SAME AS PREVIOUS LOCATION)

0021 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0022 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0023 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0024 30 dys. ADC 25 (SAME AS PREVIOUS LOCATION)

0025 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0026 30 dys. ADC 60 (SAME AS PREVIOUS LOCATION)

0027 30 dys. ADC 60 (SAME AS PREVIOUS LOCATION)

0028 30 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0029 30 dys. ADC 60 (SAME AS PREVIOUS LOCATION)

0030 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0031 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0032 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0033 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0034 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0035 30 dys. ADC 8 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-3 Gratuities APR 1984

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-7 System for Award Management OCT 2018

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting JUL 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017

52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other

Covered Entities.

JUL 2018

52.212-1 Instructions to Offerors--Commercial Items OCT 2018

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

AUG 2018

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

OCT 2015

252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

MAR 2018

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7012 Preference For Certain Domestic Commodities DEC 2017

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.246-7008 Sources of Electronic Parts MAY 2018

252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.204-20 Predecessor of Offeror (JUL 2016)

(a) Definitions. As used in this provision--

Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics

Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity;

or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA

Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [____] is or [____] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code: ____ (or mark “Unknown”).

Predecessor legal name: ____.

(Do not use a “doing business as” name).

(End of provision)

52.209-2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS--

REPRESENTATION (NOV 2015)

(a) Definitions. Inverted domestic corporation and subsidiary have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10).

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.

(c) Representation. The Offeror represents that--

(1) It [ ___ ] is, [ ___ ] is not an inverted domestic corporation; and

(2) It [ ___ ] is, [ ___ ] is not a subsidiary of an inverted domestic corporation.

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations

Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that…