Performance Work Statement. .docx
DOCX document 65 KB Posted
- Attached to
- Heavy Equipment Rental
- Solicitation number
- M6740027Q0002
- Issued by
-
United States Marine Corps
About this file
This is a Performance Work Statement (PWS) for heavy equipment rental services required by the United States Marine Corps at the JGSDF Haramura Maneuver Training Area in Hiroshima, Japan. The contractor must deliver eight pieces of equipment on December 2, 2026, at 9:00 AM and pick up all equipment on December 8, 2026, at 10:00 AM, with services limited to a maximum of 10 operating hours per day. The required equipment includes one 3-metric-ton mini excavator, one 33-metric-ton crawler excavator, two mid-range excavators (12–14 metric tons and 16–20 metric tons), one 9-metric-ton low ground pressure crawler dozer, one 15-metric-ton articulated wheel loader, one 17-metric-ton articulated motor grader, and one 2.5-metric-ton crawler forklift. All equipment must be fully serviced, fueled, and compliant with Government of Japan safety standards upon delivery, with detailed specifications provided for each piece regarding engine power, bucket capacity, operating weight, and working ranges.
The contractor bears full responsibility for all corrective and routine maintenance, parts replacement, equipment registration, and post-rental cleaning throughout the rental period. In the event of equipment malfunction or breakdown lasting more than two hours, the contractor must dispatch a mechanic or towing service within two hours of government notification, and if equipment cannot be repaired, substitute equipment must be provided within 24 hours. The firm-fixed-price contract rate must include delivery, pickup, all routine and corrective maintenance, a full tank of fuel upon initial delivery, fuel top-off upon return, and post-rental cleaning. The contractor must comply with applicable Japanese laws, Vehicle Safety Standards, Status of Forces Agreement requirements, Japanese Compulsory Insurance (minimum ¥30,000,000 for both property damage and bodily injury), and obtain all necessary vehicle permits and registration. Contractor personnel must be readily identifiable as contractor employees, and designated third country nationals are restricted from facility access. Questions must be submitted by November 23, 2026, at 8:00 AM JST, with quotes due by November 25, 2026, at 8:00 AM JST to brendan.hirsch@usmc.mil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - M6740027Q0002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Performance Work Statement (PWS) for the <Haramura Deployment for Training Acquisition>
General The Contractor shall provide fully fueled and operational equipment that meets or exceeds industry performance standards. Upon delivery, the Contractor is responsible for demonstrating that the equipment is in proper working condition. This demonstration must be conducted in accordance with the operating instructions provided with each piece of equipment, in the presence of the Receiving Officer or a designated Government Representative. After a satisfactory demonstration, the Receiving Officer will conduct a final inspection and acceptance of the equipment. All rental equipment must comply with the relevant Safety Standard Requirements set by the Government of Japan for each piece of equipment. There are no security clearance requirements for the delivery location.
Description of Services/Introduction.
The Contractor agrees to supply qualified personnel, supervision, materials, parts, equipment, tools, and transportation necessary for providing equipment rental services on the Equipment Schedule. Equipment delivery and pick-up will occur at the designated Lot located at the entrance of the JGSDF Haramura Maneuver Training Area in Hiroshima, Japan, on 2 December 2026. The equipment is required to conduct road repairs and to establish groundwork for the installation of a helicopter landing zone. The contractor shall perform to the standards in the contract and all requirements outlined.
Scope of Work and Objective.
The equipment shall be fully serviced when delivered to the U.S. Government. Services shall include, but are not limited to proper lubrication levels, battery water levels, electrical check, and other maintenance requirements set forth in the manufacturer’s warranty. The equipment will be utilized for digging, grading, and the movement of dirt to support the training exercises. The maximum operating hours for each piece of equipment are 10 hours per day.
If any service is needed for the equipment, it will be conducted by the contractor. Within (2) hours from the phone call, the contract should provide a mechanic service or towing service if needed. No maintenance will be conducted by the Government on any of the rental equipment. The Firm-Fixed-Price contract rate shall include delivery, pick-up, routine and corrective maintenance, a full tank of fuel upon initial delivery, fuel top-off upon return, and post-rental equipment cleaning.
Period of Performance.
The period of performance in accordance with the specifications of this contract is as follows:
1. Delivery Date: 02 Dec 2026 at 9:00AM.
2. Pickup Date: 08 Dec 2026 at 10:00AM.
Federal Holidays. The contractor shall not be required to provide services on federal holidays unless the holiday is particularly specified otherwise in this PWS.
| Federal Holiday |
| Occurrence |
| New Year’s Day |
| 1 January* |
| Martin Luther King Jr.’s Birthday |
| 3rd Monday of January |
| President’s Day |
| 3rd Monday of February |
| Memorial Day |
| last Monday of May |
| Juneteenth |
| 19 June* |
| Independence Day |
| 4 July* |
| Labor Day |
| 1st Monday of September |
| Columbus Day |
| 2nd Monday of October |
| Veterans Day |
| 11 November* |
| Thanksgiving Day |
| 4th Thursday of November |
| Christmas Day |
| 25 December* |
* When a federal holiday falls on Sunday, the following Monday will be observed as a holiday by the U.S. government. When a federal holiday falls on a Saturday, the preceding Friday will be observed as a holiday.
In addition to these federal holidays, if the President of the United States issues an executive order closing the federal government, that date shall also be considered a recognized federal holiday (Reference Executive Order 11582 of February 11, 1971, and 5 U.S.C. 5546 and 6103(b) and other similar statues insofar as they relate to the pay and leave of employees of the United States).
Typhoon Conditions. Japan-based military installations close when Tropical Cyclone Condition of Readiness 1C (TCCOR 1C or TC-1C) is declared by Military Weather Station authorities. The Contractor will be required to depart military bases, remain indoors, and monitor radio/television to determine when the TCCOR changes to TCCOR SW (Storm Watch) or TCCOR AC (All Clear). When TCCOR SW is declared by Military Weather Station authorities, the Contractor shall restart the service within 2 hours. If that occurs after normal business hours, services shall begin the next normal workday at 7:30am.
Place of Performance. The work to be performed for the delivery and return will be conducted at the JGSDF Haramura Maneuver Area.
Technical Requirements (Description of Work / Tasks) Equipment Maintenance Services: Corrective maintenance by military personnel is not authorized and any equipment malfunction will be handled by the rental company providing the equipment. Contractor shall be responsible for maintenance of the equipment during the period of performance of the rental, to include but not limited to the following:
1. Provide corrective maintenance and major components repairs.
2. Provide replacement for minor or major components parts due to wear and tears, mechanical failures and defects.
3. Perform inspections.
4. Registration of the rented equipment.
5. Ensure rental equipment complies with Japanese Safety Standard Requirement and other applicable law and regulations.
6. Provide substitute equipment if the equipment cannot be repaired.
7. Perform joint inspection with the Government. A copy of each inspection will be maintained by the Receiving Officer, Marine Wing Support Squadron 171 files and the Contractor.
8. In the event the equipment rental becomes inoperable due to the following, the contractor shall furnish substitute equipment within 24 hours.
a. Unforeseen circumstances or
b. Equipment found to be defective after delivery
Delivery Delivery point will be at the designated Lot at the entrance of JGSDF’s Haramura Maneuver Training Area, Hiroshima, Japan. If the Contractor is unable to deliver the equipment within the time frame due to inclement weather, the Contractor shall contact the government immediately for further instructions. The requested delivery date is 02 December, but if the rental services are no longer needed, the Contractor shall pick up equipment within 24 hours after receipt of government notification. Pick up point will be the same as delivery point.
Equipment Schedule
| Equipment Title |
| Minimum Salient Physical, Functional, & Performance Characteristics |
| 1 x 3-Metric-Ton Class Mini Excavator (Yanmar B30U class or equal) |
| · Undercarriage: Tracked (rubber or steel crawler) with front backfill/dozer blade (~1,550 mm width) and ultra-tight/zero tail swing (~775 mm rear swing radius) |
· Bucket Capacity: 0.07 m³ to 0.10 m³ (heaped) standard excavating bucket
· Operating Weight: 3,000 kg – 3,300 kg (6,600 lbs – 7,300 lbs).• Engine Power: Diesel, minimum 17 kW (23 HP) net.
· Working Ranges: Minimum digging depth of 2,800 mm (9.2 ft); minimum dumping height of 3,900 mm (12.8 ft)
· Operator Station: TOPS/ROPS canopy or enclosed cab
1 x 33-Metric-Ton Class Crawler Excavator (Hitachi ZX330-6 class or equal)
· Undercarriage: Tracked steel grouser crawler (minimum 600 mm shoe width).
· Bucket Capacity: 1.2 m³ to 1.4 m³ (1.57 yd³ – 1.83 yd³) general-purpose heavy excavating bucket
· Operating Weight: 31,500 kg – 34,000 kg (69,400 lbs – 75,000 lbs)
· Engine Power: Diesel, minimum 184 kW (246 HP) net
· Working Ranges: Minimum digging depth of 7,000 mm (23.0 ft); minimum digging reach of 10,500 mm (34.4 ft); minimum bucket breakout force of 220 kN
· Operator Station: Enclosed ROPS/FOPS cab with HVAC
| 1 x 12- to 14-Metric-Ton Class Excavator (Hitachi ZX125W-6 Wheeled or ZX120/ZX135 Crawler class or equal) |
| · Undercarriage: Wheeled 4WD with stabilizers |
· Bucket Capacity: Minimum 0.45 m³ (0.59 yd³) standard excavating bucket
· Operating Weight: 12,000 kg – 14,500 kg (26,400 lbs – 32,000 lbs)
· Engine Power: Diesel, minimum 69 kW (93 HP) net
· Working Ranges: Minimum digging depth of 4,500 mm (14.7 ft); minimum digging reach of 7,500 mm (24.6 ft); minimum dumping height of 6,000 mm (19.7 ft) .
· Operator Station: Enclosed ROPS cab with HVAC
1 x 16- to 20-Metric-Ton Class Excavator (Hitachi ZX145W-3 Wheeled or ZX180/ZX200 Crawler class or equal)
· Undercarriage: Wheeled 4WD with stabilizers/blade
· Bucket Capacity: 0.70 m³ to 0.80 m³ (0.91 yd³ – 1.05 yd³) standard excavating bucket
· Operating Weight: 15,000 kg – 20,500 kg (33,000 lbs – 45,000 lbs) .
· Engine Power: Diesel, minimum 90 kW (120 HP) net
· Working Ranges: Minimum digging depth of 5,500 mm (18.0 ft); minimum digging reach of 8,600 mm (28.2 ft); minimum dumping height of 6,100 mm (20.0 ft)
· Operator Station: Enclosed ROPS cab with HVAC
| 1 x 9-Metric-Ton / D3 Class Low Ground Pressure (LGP) Crawler Dozer (Komatsu D37PX-24 class or equal) |
| · Undercarriage: Tracked Low Ground Pressure (LGP) single-grouser crawler (minimum 600 mm / 24 in shoe width; max ground pressure ~30 kPa / 4.33 psi) with hydrostatic transmission. |
· Blade Configuration: Power Angle Tilt (PAT) dozer blade; minimum capacity 1.90 m³ – 2.13 m³ (2.50 yd³ – 2.79 yd³); minimum blade width 3,200 mm (10 ft 5 in)
· Operating Weight: 8,800 kg – 9,500 kg (19,400 lbs – 21,000 lbs)
· Engine Power: Diesel, minimum 66 kW (89 HP) net
· Operator Station: Enclosed ROPS/FOPS cab with HVAC
| 1 x 15-Metric-Ton Class Articulated Wheel Loader (Komatsu WA320-7 class or equal) |
| · Configuration: 4WD articulated rubber-tired wheel loader standard lift linkage (Bucket configuration; forks not required). |
· Bucket Capacity: 2.8 m³ to 3.2 m³ (3.7 yd³ – 4.2 yd³) heaped general-purpose stockpiling/earthmoving bucket; minimum width 2,700 mm (8 ft 10 in).
· Operating Weight: 15,000 kg – 16,000 kg (33,000 lbs – 35,300 lbs).
· Engine Power: Diesel, minimum 120 kW (160 HP) net
· Performance: Minimum static tipping load (straight) of 11,000 kg (24,250 lbs); minimum dump clearance of 2,800 mm (9.2 ft)
· Operator Station: Enclosed ROPS/FOPS cab with HVAC
| 1 x 17-Metric-Ton Class Articulated Motor Grader (Komatsu GD655 class or equal) |
| · Configuration: Tandem-drive, articulated frame motor grader (minimum 25° articulation angle; max turning radius 7.5 m / 24.6 ft). |
· Moldboard / Blade: Hydraulic power-shift moldboard, minimum width 3,700 mm to 4,270 mm (12 ft to 14 ft); minimum blade down-pressure of 6,800 kg (15,000 lbs); minimum cutting depth of 600 mm (2.0 ft)
· Operating Weight: 16,500 kg – 19,500 kg (36,300 lbs – 43,000 lbs)
· Engine Power: Diesel, minimum 145 kW to 163 kW (195 HP – 218 HP) net
· Operator Station: Enclosed ROPS/FOPS cab with HVAC
| 1 x 2.5-Metric-Ton (5,500 lb) Crawler Forklift (Morooka MF-25V class or equal) |
| · Undercarriage: Full rubber crawler track system with hydrostatic transmission (HST) designed for unimproved/muddy off-road terrain (minimum 350 mm track width; max empty ground pressure ~30 kPa / 4.3 psi) |
· Rated Lift Capacity: Minimum 2,500 kg (5,500 lbs / 5K class)
· Mast & Forks: Maximum lift height of at least 3,000 mm (9.8 ft / 118 in); standard pallet forks minimum 1,070 mm (42 in) length.
· Operating Weight: 3,700 kg – 4,000 kg (8,150 lbs – 8,820 lbs)
· Engine Power: Diesel, minimum 33 kW (45 HP) net
Applicable Documents / Governing References. In addition, requirements of regulations and policies applicable to this contract/order by virtue of clauses contained herein, the contractor shall, in the performance of this contract/order, also comply with all references applicable to the specific tasks of this Performance Work Statement, as listed below, including any amendments or subsequent issuance.
| Reference |
| Location |
| Federal Acquisition Regulation System |
| https://www.acquisition.gov |
Special Instructions and Administrative Information Damage of the rented equipment: The Government is required to promptly notify both the Contracting Officer and the Contractor if the rented equipment is damaged during use. In the event that the equipment is damaged while in the Government’s possession, the Government will investigate to determine the cause of the damage. If it is found that the damage was caused by the Government, the Government will be held liable. Any payments made for the repair of the damage will be processed through the claims process outlined in FAR 33.2
Personal Injuries: The Government shall be responsible for and liable for personal injuries incurred during the operation of rental vehicles.
QUALITY CONTROL: The Contractor shall establish and maintain a quality control program to ensure that services are provided in accordance with generally accepted commercial practices and the specifications outlined in the owner’s manual. The Contractor will implement procedures to identify and prevent defective services. A designated quality control inspector will be assigned to the Government evaluator, who will notify the inspector if any deficiencies are found. Records of all inspections conducted by the Contractor, along with any corrective actions taken, shall be made available to the Government upon request.
QUALITY ASSURANCE: The Government may inspect each completed task or increase the frequency of quality control inspections, if necessary, due to repeated failures identified during inspections or frequent customer complaints. Similarly, the Government may reduce the number of quality control inspections if performance improves. The Government will also investigate any complaints received. The Contractor is responsible for initially validating customer complaints; however, in cases of disagreement with the customer(s), the Government representative will make the final determination regarding the validity of the complaint(s).
Report of Findings:
1. Contract Discrepancy Report: The Contracting Officer may issue a Contract Discrepancy Report to the Contractor, identifying any deficiencies in the rental equipment services. Upon receipt of the report, the Contractor shall respond in writing to the Contracting Officer within three (3) calendar days, detailing the proposed corrective actions to address the deficiencies and outlining the steps the Contractor will take to prevent similar issues from arising in the future.
2. Performance Evaluators: The Government may, at its discretion, prepare performance evaluation reports regarding the Contractor’s services. The Contractor may be asked to provide written comments on these reports periodically.
Non-Personal Services. This is a non-personal service, performance-based contract. The contractor bears responsibility to manage its employees and guard against any actions that could be characterized as personal services as defined in FAR 37.104, or which convey the perception that personal services are being delivered. No provisions are implied nor provided in this contract for any benefits such as medical care, retirement, or worker’s compensation, other than those incorporated through enumerated clauses.
Identification of Contractor Personnel and Equipment. In accordance with DFARS 211.106, contractor personnel performing non-personal services on DoD installations or other government facilities shall ensure that they are readily identifiable as contractor employees (including subcontractors and consultants). All contractor employees shall always comply with the following:
Telephone Identification. Identify themselves as contractor personnel at the onset of every telephone call made from a government telephone or any other phone if the call is made in support of Government-related requirements and activities.
Recorded Messages. Identify themselves as contractor personnel in all recorded messages including those, which are heard by callers attempting to contact contractor employees via answering machines or voicemail.
Meetings, Conferences and Events. Identify themselves as contractor personnel at the onset of every meeting, conference or any other gathering attended in support of any Government related requirements or activities.
Correspondence. Identify themselves as contractor personnel on any correspondence, documents, or reports accomplished or sent in support of any service provision to the Government, including, but not limited to, correspondence sent via the U.S. Mail, facsimile, or electronic mail (email) inclusive of out-of-office replies.
Personal and Corporate Identification. Wear or display contractor provided nametags, badges or attire which display, at a minimum, the name of the contractor and their respective company.
Designated Third Country Nationals (DTCN). Persons from certain countries are considered DTCN and are generally restricted from entering Marine Corps Bases Japan (MCBJ) Camps, Air Stations, or facilities. A listing of DTCN countries and other related information regarding this policy can be found in USFJ Instruction 31-204 (Designated Third Country Nationals), which can be made available upon request.
Exemption from Japanese Taxes. Pursuant to the U.S. – Japan Status of Forces Agreement and the Joint Committee, the governments of the United States and Japan have agreed that the procurement in Japan of materials, supplies, equipment and services for official purposes may be except from certain Japanese taxes. When incorporated, paragraph c. of the clause FAR 52.229-6, “TAXES – FOREIGN FIXED PRICE CONTRACTS” and/or DFARS 225.229-7001 ‘TAX RELIEF’ stipulate that contract/order pricing shall not include the Consumption Tax. Submission of, and/or incorporation into the contract of, your offer, certifies that pricing does not contain any cost related to the Consumption Tax. Questions concerning this matter should be directed to your local Japanese Tax Office.
Subcontract Management. The contractor shall be responsible for any subcontract management necessary to integrate work performed on this requirement and shall be responsible for and accountable for subcontractor’s performance on this requirement. The prime contractor will manage work distribution to ensure there are no Organizational Conflict of Interest (OCI) considerations. Contractors may add subcontractors to their team after notification to the Procuring Contracting Officer (PCO) or Contracting Officer Representative (COR). Cross teaming may or may not be permitted.
Mission Essential Personnel / Tasks. Unless specified otherwise in this Performance Work Statement, contractors supporting this contract/order are not considered “Mission Essential” personnel (as defined in DFARS 237.76) who would be required during crisis or emergency operations.
Hazardous Materials and Safety. The Contractor and its subcontractors shall comply with all applicable laws, including Public Law 91-596 (Occupational Safety and Health Administration (OSHA)) and DOD Directive 4715.1E, Environmental, Safety, and Occupational Health (ESOH)). Contractor personnel performing services on a DOD installation shall participate in local Voluntary Protection Programs (VPP). Information on the VPP is available at http://www.osha.gov/dcsp/vpp/index.html
Installation Access and Personnel Credentialing. A military representative will meet drivers at the entrance of the Haramura Maneuver Area to receive the equipment and provide access as needed. If prior coordination is required, the Contractor will be contacted prior to delivery.
Motor Vehicles. Vehicle licensing, registration, and insurance requirements must all be conducted in accordance with host nation law, USFJ Instruction 31-205, and applicable local installation policies.
Registration Termination. Vehicle permits will expire upon termination date of this contract/order, expiration of an individual base pass or DBIDS ID, expiration of vehicle inspection sticker, or termination of their employment (whichever occurs first). Permits issued to individuals who overstay any of these authorized dates become void and invalid.
Insurance. Vehicle permitting procedures require that all vehicles, personal or corporate, must be properly inspected and insured in accordance with Japanese Compulsory Insurance (JCI) requirements. Additionally, for SOFA status personnel and U.S. corporate vehicles, the Contractor or SOFA status individual is required to procure and maintain, during the entire period of performance under this contract, the following minimum insurance on each vehicle used by the Contactor at the work site:
Automobile Property Damage Insurance Amount: ¥30,000,000 (or U.S. Dollar equivalents) Bodily Injury Insurance Amount: ¥30,000,000 Yen (or U.S. Dollar equivalents)
Prior to the commencement of work, the Contractor shall furnish to the Contracting Officer a certificate or written statement of the above-mentioned insurance for all corporate vehicles to be used. The policies evidencing required insurance shall contain endorsement to the effect that cancellation or any material change in the policies adversely affecting the laws of the state in which this contract is to be performed and in no event less than thirty (30) days after written notice thereof to the Contracting Officer.
Road Laws. All personnel operating motor vehicles under this contract/order are subject to U.S. military installation regulations and Japanese Road Laws. Failure of the contractor, its employees, or its sub-contractors, to comply may result in revocation of driving privileges or other legal action.
Vehicle Disposal. Personnel protected under the Status of Forces Agreement (SOFA) are required by regulation to properly dispose of vehicles prior to departure from Japan. For individuals performing under this contract, the contractor may be held financially liable for vehicles abandoned, or vehicles not disposed of properly, in accordance with vehicle regulations as agreed with the Government of Japan.
Personnel Access / Credentialing. Access to local installations is inherently required to accomplish specified tasks under this contract/order. The contractor shall therefore ensure all necessary actions are taken to obtain such access by its personnel in time to affect access in accordance with the requirements of PWS and POP. Failure to complete such actions in a timely manner, some of which may occur prior to the POP or individual mobilization/relocation to the place of performance, shall not constitute excusable delay. Upon request, the Contracting Officer will provide a ‘check-in’ sheet that summarizes required actions.
Return and/or Disposal of Access Credentials. The contractor’s employees shall return to the applicable issuing office all base passes, DBIDS cards, and/or CAC, immediately upon termination of employment or completion of this contract and certification of receipt shall be obtained and submitted to the Contracting Officer. The Contractor shall submit a listing of employees terminated under this contract to the Contracting Officer within seven (7) days of the effective date of termination.
Status of Forces Agreement. Possession of a CAC or other credential does not, alone, determine the legal status of personnel performing under this contract. Additionally, unless specifically identified on the CAC, the credential does not necessarily authorize logistical support privileges such as commissary/exchange access. The individual status of personnel performing under this contract, and the privileges authorized, are governed in accordance with United States Force Japan Instructions (predominantly USFJI 64-100), applicable credentialing regulations, and the information prescribed via DFARS clauses regarding Contractor Personnel in Japan, as contained herein.
[Reserved]
[Reserved]
Travel Pre-Authorization. All travel shall be pre-approved, in writing, by the Contract Officer or COR. The request shall include total cost, and itemized airfare, rental vehicle, per diem, mileage, parking, fuel and toll charges. Travel requests will include the purpose of the trip and why Video Teleconference (VTC) or phone conversations would not meet the business requirement. Costs for travel shall be billed in accordance with the regulatory implementation of Public Law 99-234 and FAR 31.205-46 Travel Costs
Authorized Travel. Authorized travel costs will only be reimbursed for:
· Contractor employees who otherwise perform direct day-to-day services at the designated place of performance under the requirements of this order/contract,
· Who has a need to travel to fulfill the performance of those duties, and
· Upon the direct request and written pre-approval of the Contracting Officer (KO) or appointed Contracting Officer Representative (COR)
Unauthorized Travel. Travel costs are explicitly not reimbursable for the following:
· Relocation or initial mobilization costs, or any other travel not pre-approved by KO or COR,
· Contractor personnel who indirectly support this order/contract (such as visiting management or supervisory personnel not providing on-site day-to-day support), Foreign Travel
Compliance with DoD Foreign Clearance Guide (FCG). Personnel performing under this contract who may be required to travel to other countries during performance shall comply with all FCG prescriptions for each country to visit. Access to the FCG can be found here: https://www.fcg.pentagon.mil/fcg.cfm . Contractors unable to access the site, or otherwise requiring assistance, shall contact the contracting officer, or appointed Contracting Officer Representative (COR) for assistance.
Compliance with U.S. Indo-Pacific Command (INDOPACOM) and other directives. Contractor personnel traveling within the INDOPACOM Area of Responsibility (AOR) are subject to, and shall comply with, INDOPACOM directives related to such travel. Additionally, contractor personnel traveling in support of exercises, or other specified events and activities, shall comply with applicable travel instructions published for the designated area or event, as issued by General Order, Planning Conference Memorandum, Exercise Directive, Initiating Directive, or other similar correspondence.
Personnel with security clearance are subject to additional requirements and shall consult with the supported command G-2 when contemplating and/or completing foreign travel.
Allowable Costs
All travel shall be conducted in accordance with Federal Travel Regulations (FTR) and/or U.S. Department of State Standardized Regulations (DSSR).
As indicated in FAR 31.205-46(a)(3)(iv), 31.205-46(a)(7), and 31.250-46(b), all costs must be supported by appropriate documentation and receipts provided to the KO/COR.
Quality Control and Quality Assurance. In accordance with FAR part 46, and the respective enumerated clauses incorporated in this contract/order, the contactor is reminded that the government may conduct Quality Assurance actions, inspect the Contractor’s Quality Control Plan and records, and take remedial actions as necessary, at any time through the duration of this contract/order.
PERFORMANCE REQUIREMENT SUMMARY (PRS) - The performance requirement for the contractor, overall, is the delivery and pickup of rental equipment and the corrective maintenance of the equipment rented that has any mechanical issues during the rental period that is not caused by operator error. If a mechanical issue occurs, it will be the Government representative’s responsibility to contact the contractor if equipment is unserviceable for (2) hours. It will be the contractor’s responsibility to respond to the service call and have maintenance come to the site to provide support within (2) hours of the phone call from the Government.
| Required Service (Performance Objective) |
| PWS Reference |
| Performance Standard |
| Acceptable Quality Level (AQL) |
| Surveillance Method |
Equipment Delivery & Joint Inspection
1.2 / 4.0
| Deliver all 8 items to JGSDF Haramura designated lot on 02 Dec 2026 at 0900 and conduct joint inspection. |
| 100% Compliance (On-time & documented) |
| 100% Inspection / Joint Inspection Report |
Equipment Serviceability & Fuel/Cleanliness
1.0 / 1.2
| Equipment must be fully serviced, compliant with GoJ safety standards, clean, and fully fueled upon delivery. |
| 100% Compliance |
| 100% Inspection upon delivery |
Corrective Maintenance & Substitution
1.2 / 3.0
| On-site mechanic/towing arrival within 2 hours of notification for breakdowns >2 hours; substitute equipment furnished within 24 hours if inoperable. |
| 100% Compliance |
| Customer Complaint / 100% Incident Review |
Inspection & Equipment Pick-Up
1.2 / 4.0
| Pick up all equipment on 08 Dec 2026 at 1000 (or within 24 hours of early release notification). Post-rental top-off and cleaning completed. |
| 100% Compliance |
| 100% Inspection upon pick-up |
DISTRIBUTION: DoD COMMUNITY ONLY
File details come from the government source that posted it. Updated .