Amendment__1.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendment Submission of offerors. See summary of changes for details. All other terms and conditions remains unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 24

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 02-Aug-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M67400-16-T-0113

X 9B. DATED (SEE ITEM 11)

29-Jul-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

02-Aug-2016

CODE

MARINE CORPS REGIONAL CONTRACTING OFFICE

MARINE CORPS BASE

CAMP S.D. BUTLER

PSC 557 BOX 2000

FPO AP CA 96379-2000

M67400 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M67400-16-T-0113

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The solicitation issue date has changed from 15-Jul-2016 to 29-Jul-2016.

The following have been added by full text:

52.216-27 SINGLE OR MULTIPLE AWARDS. (OCT 1995)

The Government may elect to award a single delivery order contract or task order contract or to award multiple delivery order contracts or task order contracts for the same or similar supplies to two or more sources under this solicitation.

(End of provision)

ADDITIONAL REQUIRED INSURANCE FOR JAPAN

(a) All vehicles must be properly inspected/Insured in accordance with Japanese Compulsory Insurance (JCI). The Contractor shall procure and maintain during the entire period of performance under this contract the following minimum insurance on each vehicle used by the Contactor at the work site:

Type: Automobile Property Damage Insurance Amount: 30,000,000 (or U.S. Dollar equivalents)

Bodily Injury Insurance Amount: 30,000,000 Yen (or U.S. Dollar equivalents)

(b) Prior to the commencement of work hereunder, the Contractor shall furnish to the Contracting Officer a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the laws of the state in which this contract is to be performed and in no event less that thirty (30) days after written notice thereof to the Contracting Officer.

(c) The Contractor agrees to insert the substance of this clause, including this Paragraph (c), in all subcontracts hereunder.

The following have been modified:

ATTACHMENT I

Product Description Characteristic Required Specifications Offered Items Specifications

CLIN 0001

QTY: 2 EA

Energy Star Qualified No

Exterior Stainless steel with 4 adjustable legs Interior Stainless steel

MILK DISPENSER

Temperature Indicator On door front (Adjustable temperature control)

Door Heavy duty hinge Dispenser valve Double valve Accommodation -shall include 6 gallon crate(s) and 2 platforms Power 115 V, 60 Hz, Single PH

Capacity 12 gallon capacity ( Two 5 or 6 gallon crates ) Accomodates 3 (milk-in -bag), 5, and 6 gallons

Exterior Dimensions

Length: 26 1/2” within +/- 1” Depth:17 1/8” within +/- 1” Height: 39 1/2” within +/- 1”

Power Source cord and plug included Warranty Manufactures standard Compressor 1/10 hp Legs legs standard

Power 115V/60Hz/1PH, 1.3Amps

Product Description Characteristic Required Specifications Offered Items Specifications

CLIN 0002

QTY: 1 EA

COUNTERTOP

AIR-COOLED ICE

AND WATER

DISPENSER

Type: Countertop, Touchfree

Cooling Type Air-cooled, Self-contained condenser, Storage capacity Approximately 720 lbs production 24 hours

Exterior

- Polyurethane liner, stainless steel

- Plastic ice dispenser

- Plastic water dispenser

Height: 45 3/4” within +/- 1” Width: 35 3/16“ within +/- 1” Depth: 29 1/4” within +/- 1”

Ice Type Nugget Ice Power 115V, 60Hz 1PH, 24.6 amps, NSF, Power source Power Cord and plug Warranty Manufactures Standard

Features Sanitary, one hand operatioon

CLIN 0003

QTY: 1 EA

Style Automatic single brewer

COFFEE BREWER

Power 120V / 60Hz / 1Ph Hot Water Faucet Yes

Batch Size 1.5 Gallon

Dimensions Width: 9” within +/- 1” Depth: 23 1/2” within +/- 1” Height: 28” within +/- 1”

Power source Power cord and plug Power Type Electric Pressure 30-70 PSI Warranty Manufactures Standard

Finishes Stainless steel brew basket Stainless steel shuttle Plastic legs

-Includes server Style Single

Coffee Filter SZ 13 ¾” x 5 ¼”

CLIN 0004

DISPLAY

REVOLVING

REFRIGERATED

MERCHANDISER

Qualified NO

Type Refrigerated Merchandiser ,self-contained refrigeration w/ condensate evaporator

Shelves 4 tiers of wire or Glass revolving shelves -includes 4 swivel casters Door 2 full-length, self-closing glass Exterior Satin silver exterior finish Interior White Lamps 3 vertical lamps Door Locks Yes

Overall Dimensions

Length: 39 1/2" within +/- 1” Width: 35” within +/- 1” Height: 37” within +/- 1”

Power 120V / 60Hz / 1/3Ph / 10.0AMPS Power source Minimum 6ft cord and plug

CLIN 0005

QTY: 4 EA

Qualified N/A

Type Refrigerated See-Thru Display Case and

REFRIGERATED

DISPLAY CASE,

PASS THRU TYPE

COUNTER TOP

SEE-THROUGH

Countertop Mounting Top-mounted refrigeration system Shelves Adjustable shelves Door Hinged glass door Exterior Stainless steel floor Interior Stainless steel floor Refrigeration system Top mount

System Self-contained refrigeration system Pass-thru countertop case Legs Adjustable Material Insulated glass door

Dimensions Length: 24” within +/- 1” Depth: 24 1/2“within +/- 1” Height: 39 1/2" within +/- 1”

Refrigerant R-134a Power 115V / 60Hz / 1Ph, 5.9amps, 1/4HP Power source Cord and NEMA 5-15P plug.

Warranty Manufactures Standard Warranty

CLIN 0006

QTY: 2 EA

PASS-THROUGH

REFRIGERATOR,

2 SECTIONS

Qualified Yes

Pass-Through Yes Sections 2 Number of Doors 4 (Full length) Number of Shelfs 6 Capacity 48.3 cu ft Door Style Swing Door Type Solid Door Hinged Left / Right Door Handle 4 Depth cabinet Standard Construction All stainless steel Self-contained Refrigeration Yes / Top mounted compressor

Control type Microporcessor (3 digit LED display for temperateure)

Overall Dimensions

Width: 52 1/8” within +/- 1” Depth: 37 15/16” within +/- 1” Height: 83 1/4" within +/- 1”

Power 115V / 60Hz / 1Ph / 8.6 Amps / 1500W Power source Cord and plug Legs adjustable leg

CLIN 0007

QTY: 3 EA

Qualified Yes

ROLL-THRU,

HEATED

CABINET, 2-

SECTION

Heated Holding Cabinet Yes

Roll-Through Yes Sections 2 Number of Doors 4 (Full length) (2) front side & (2) back side Door Style Swing Door Type Solid Door Hinged Left / Right Depth cabinet Standard Construction All stainless steel (interior & exterior) Accommodate Rollin racks two 27’ x 29” x 66” pan racks

Control type Microporcessor (3 digit LED display for temperateure)

Overall Dimensions

Width: 68” within +/- 1” Depth: 39 1/8” within +/- 1”

Power 208v / 115V / 60Hz / 1Ph / 15.5 Amps / 3000 W

CLIN 0008

QTY: 3 EA

HEATED SINGLE

SHELF DISPLAY

CASE

MERCHANDISER

Number of shelves

1 with front curved tempered glass (Hinged front glass panel tilts), Back 2 Sliding Glass Doors

Color Silver Material Aluminum / Stainless Steel Shelf Single Shelf Style Horizontal Capacity 2 pans, 2-mounted infrared heating unit, Control Type Thermostatic Installation Type Countertop Light Incandescent Temperatures adjustable Between 100 and 200 degrees fahrenheit

Humidity Adjust 10 ~30%

Overall Dimensions

Width: 32 1/2” within +/- 1” Depth: 26” within +/- 1” Height: 24" within +/- 1”

Power 120V / 60Hz / 1Ph / 780 W

Leg adjustable legs

Easy Access Sliding Glass Doors (One-pan models feature a swing-out door), CLIN 0009 Energy Star NO

QTY: 5 EA

ELECTRIC

CONVECTION

OVER, TWO

STACKED

Qualified

Control Manual

Exterior Stainless steel Interior Porcelain enamel Door Hinging system Pan capacity 6 chrome plated wire shelves (total 12 shelf) Number of Oven Deck Capacity 12 (full-size sheet pans size: 18” x 26” x 3” )

Oven Deck opening space spaced at 1-3/4"

Temperature range Between 100 and 500 degrees fahrenheit

Motor 2 speed fan Timer 60 minutes Overall Dimensions (2 component)

Width: 38” within +/- 1” Depth: 44 1/2” within +/- 1” Height: 68" within +/- 1”

Option Accessory Rear enclosure panel (Stainless steel, part# 5005876) Shelf, oven rack (Part #: SH-26795)

Power 208V / 60Hz / 3Ph / 28.8Amps / 10.4kW

Leg 6” leg with bullet feet

CLIN 0010

QTY: 1 EA

COUNTERTOP

GRIDDLE

With CLAMSHELL

AND STAND (W /

UNDERSHELF)

CASTER

Category Heavy Duty Griddle, Countertop Unit, Electric

Plate Chrome : 72 inch W x 24 inch D, 1/2 inch thick polished steel

Future low profile, stainless steel front, sides, front top ledge with "Cool Bullnose", front grease trough, 4 inch back tapered and side splashes, Thermostat Snap action every 12” range 200‐ 450° F

Exterior Finish Stainless Steel front Griddle plate finish Smooth Steel

Equipment Stand

1 EA

Stainless steel , 73 inch W x 24 inch H, marine edgew/ undershelf with casters

Griddle Clam Shell (mount part)

GTS12-1 Griddle electric Clam Shell : 208v/50- 60 Hz./1 ph, 3.6kW, 17.3 amps, size: 11.6 W inch x 23.9 inch D x 5/8 inch thick

Power source Electric

Overall Dimensions

Width: 72” within +/- 1” Depth: 31.5" within +/- 1” Height: 15.25” within +/- 1”

1 STABLZRGTS Stabilizer bracket 1 TEFLONKIT10B Teflon sheet

Griddle Electric 208V / 60Hz / 3Ph / 45.0 Amps / Total 32.4 kW Power Source Cord and plug Griddle Leg 4 adjustable legs

CLIN 0011

Reach-In Freezers

FREEZER

2 SECTIONS

Energy Energy Star qualified Reach-in Yes Sections 2 Number of Doors 2 (Full length) Door Style Swing Door Type Solid Door Hinged Left / Right Door Handle 2 Depth cabinet Standard Construction All stainless steel Self-contained Refrigeration Yes /

Control type Microporcessor (3 digit LED display for temperateure)

Capacity 46 cubic ft

Overall Dimensions

Width: 52 1/8” within +/- 1” Depth: 35 “ within +/- 1”

Power 115V/60 Hz /1 PH / 11.2 Apms

Legs 6” stainless steel leg with Heavy Duty 6 inch stainless steel casters

Additional Epoxy Shelf Kits(each kit includes 3 shelves with Pints), with Tray Slide Kits, CLIN 0012 Energy Star NO

QTY: 3 EA

Direct Steam Kettle

20GL

stationary kettle type with faucet bracket

Construction stainless steel construction / one-piece welded

2 inch sanitary tangent draw-off standard

Cover dome shape and hinged cover/ w/heavy duty reinforced bar rim capacity 20-gallon

316 stainless steel kettle liner, operation 2/3 jacket unit operating from direct steam pressure 25 PSI

2/3 Steam Jacketed Kettle

Direct Steam

Steam trap assemblies

Cold water fill faucet

Hot water fill faucet spray hose w/ sprayer ( sprayer w/pre-spray hose) w/flex line, Width: 24” within +/- 1” Depth: 27.50” within +/- 1” Height: 36" within +/- 1”

2 inch TDO, 1/4 inch perforated strainer, Leg tri-leg open base, flanged feet, CLIN 0013 Energy Star NO

Tilting Direct Steam Kettle 40GL

Tilting Manual Tilt, Crank wheel, crank tilt, Construction stainless steel construction / one-piece welded Floor-type, direct-steam Cover counter balanced cover capacity 40-gallon operation operating from direct steam 2/3 Steam Jacketed Kettle Pressure 25 PSI Direct Steam

Steam trap assemblies

Hot water fill faucets, Cold water fill faucets spray hose w/ sprayer ( sprayer w/pre-spray hose) w/flex line, Reinforced bar rim with flow control pouring lip, self locking

Width: 43” within +/- 1” Depth: 34-1/2” within +/- 1” Height: 36" within +/- 1”

Leg tri-leg base, three tubular legs and flanged feet, CLIN 0014

QTY: 1 EA

TABLE TOP KETTLE

DIRECT STEAM Two

40 QUART KETTLES W/

STAINLESS STEEL

TABLE

Direct Steam

Construction stainless steel construction / one-piece welded

Unit 2 each 40quart kettles (TDA/1-40) with Table

Cover counter balanced cover capacity 2 each 40 quart kettle operation operating from direct steam

2/3 jacket

Tilt hand tilt w/ support arm, Dimensions Stainless Steel Table (63”W x 25”(d) x 45.38” (H), mounted w/ 5” wide drain trough, 146220 Faucet: single pantry with swing spout riser, left or right sided mounting, 128002 Cover: liftoff, for 40-48 quart table top, removable sliding dump tray, swing faucet & steam trap

Legs heavy 2” round tubular stainless steel with adjustable bullet feet

CLIN 0015

QTY:1 EA

CONVECTION

STEAMER

WITH STAND

Steam Generator countertop , Boilerless Construction S/S interior and exterior Unit Steamer with stand Door Left-Hinged Door capacity (5) 12 x 20 x 2-1/2 inch D pan control digital switch On-off rocker switch single water connection

Timer Electronic timer Tilt hand tilt w/ support arm, Overall Dimensions

Width: 21-5/8” within +/- 1” Depth: 29-7/8” within +/- 1” Height: 27-9/16 " within +/- 1”

Steel support stand w/ caster kit

Electric 208 v/60 Hz./3-ph, 12.0kw, 34.0 amps, Power Source Power cord and plug

CONVECTION STEAMER with adjustable legs, Heat shield kits, 1 Stainless Steel support stand (21-9/16 inch W x 31-1/16 inch H) w/ caster kit, Heat shield kits, CLIN 0016

TRIPLE DECK

ROAST OVEN

TRIPLE DECK OVEN, Two pan Roast Deck type

Construction Heavy duty 430series stainless steel exterior, with No. 4 finish

-cooking compartment is aluminized steel & fully insulated six sides

Deck size 38 inch W x 30 inch D x 12 inch H, Deck opening 12 inch

Deck door 3 Heavy duty spring-loaded pull-down door with grab-bar handle

Simple knob-set time and temp controls control Recessed, right side mounted control panel

Manual vent rod Temperature 100-450°F operating temperature range Timer 60 minute timer

Overall Dimensions

Width: 54” within +/- 1” Depth: 36” within +/- 1” Height: 72" within +/- 1”

Electric 208 V / 60 Hz /3 PH, 18.0 kw legs 6 stainless steel legs, standard power cord and plug

CLIN 0017

VERTICAL

CUTTER MIXER

Vertical Cutter Mixer, Floor type Construction stainless steel tilting bowl with clear lexan cover

Capacity 45-Quart Capacity Stainless Steel Bowl w/ Pouring Lip

Timer 5-minute timer with "Hold" and "Jog" settings

2 bladed cut/mix knife, knead/mix arm, knead/mix attachement, poly strainer basket, safety interlocks, Tilt 90-degree stainless steel bowl tilt, bowl tilt lever, Stainless steel bowl with pouring lip, clear counterbalanced Lexan cover, RPM 1,140

With Polypropylene Strainer Basket Power electirc

Stainless steel mixing baffle with pour-through center shaft

Switch Start/Stop Push Button Switches

Width: 23-3/8” within +/- 1” Depth: 38-7/8” within +/- 1” Height: 62-1/2 " within +/- 1”

Option Accessory Option: Extra Basket Kit, Option:4 Blade knife

Electric 200V/60 Hz /3 Phase, 5 HP, 6' Power Cable, Plug and Receptacle Legs rubber foot onto each leg, CLIN 0018

FOOD CUTTER

Food Cutter with #12 attachment hub Construction One-piece Burnished Aluminum Housing Capacity 15 Pound

STANDARD

18 inch diameter stainless steel bowl, Double Cutlery Grade Stainless Steel Knives with Stainless Steel Knife Comb, Electric Motor 1 H.P. Motor

RPM 1725 RPM

Switch Pull/Push On/Off Switch

Overall Dimensions

Width: 33.74” within +/- 1” Depth: 22.52” within +/- 1” Height: 17.52 " within +/- 1”

Electric 115V/60 Hz /1 PH, 6.2 Amps

3 “ Stainless steel leg with rubber Feet with rubber Feet

Warranty

Manufactures standard

CLIN 0019

Cube Ice Maker

Condenser type Water-cooled, Ice Cube maker Machine, Construction stainless steel finish Capacity 1,165 lb /24 Hour Ice Ice size Full dice size (7/8”), Cube ice Self contained condenser, Programmable Ice Production Programmable Ice Production On/Off Time, Ice volume

Door hinged front door/ swings blue illuminated display

Removable water-trough, distribution tube, curtain, and sensing probes

Lumlnlce Groth Inhibitor or equal

Bin Level Control (Bultin-in LED light illuminates bin.)

Water Filters

AuCS: performs routine ice machine cleaning automatically.

Water usage 20.7 Gallons per 100 lbs

Overall Dimensions

Width: 30 ” within +/- 1” Depth: 24 - 1/2 ” within +/- 1” Height: 29 - 1/2 " within +/- 1”

Electric 208 V - 230 V / 60 Hz / 3 PH, Power Source Hardwired or plug in wall.

CLIN 0020

ICE STORAGE BIN

Use with Ice Maker as unit

For CLIN:0019 Ice Maker 48” W

Construction stainless finish exterior Bin Storage Capacity 710 lbs

Bin door Top Hinged, front stay-open design door Includes Ice Scoop Mount Top-Mounted

Overall Dimensions

Width: 48 ” within +/- 1” Depth: 34” within +/- 1” Height: 50-51 3/4" within +/- 1”

Legs Stainless steel bullet Legs

CLIN 0021

QTY: 2 EA

Food Processor (with 6 plates), Electric

Type Continuous Feed Food Processors with 6 pack plates 11 lb per/min production capacity

Construction All Aluminum Hopper and Housing

Basic unit with deflector plate and cleaning brush

Includes

6 pack Plates and cleaning brush .

(1) 1/16" slicer plate,

(1) 3/8" slicer plate,

(1) 5/32" slicer plate,

(1) 7/32" slicer plate,

(1) 3/8" dicer plate,

(1) 3/16" shredder plate.

Plate Speed 420 RPMs

Planetary gear driven operating Speed 1 Speed Angled front Half Hopper size motor with overload protection

Overall Dimensions

Width: 8-13/16 ” within +/- 1” Depth: 16-11/16 ” within +/- 1” Height: 19-1/2 " within +/- 1”

Electric 120V/ 60 Hz /1 PH, 3.5 Amps , 1/3 HP power cord and plug Leg anodized aluminum with rubber feet on base

CLIN 0022

PASSTHRU DUAL

TEMP CABINET

REFRIGERATED-

HEATED

Cabinet Dual Temperature Refrigerator-Heated , 2 Section

Type Pass-through Type Finish Stainless steel interior/exterior

Door Full length Door/ Full size Height cabinet

Total Doors 4 door (front/back) with 4 metal door handle

Control type INTELA-TRAUL Microporcessor control (3 digit LED display for temperateure) or equal

Door Hinged Left door hinged left/ right hinged right, standard Both Sides Class 110

Top mounted compressor Self-contained refrigeration

6 each Adjustable wire shelves Cabinet Dimensions 32” deep (standard)

Overall Dimensions

Width: 58” within +/- 1” Depth: 37-15/16” within +/- 1” Height: 83-1/4 " within +/- 1”

Option:Universal Type Tray slides to accommodate Either (1) 18 inch x 26 inch or (2) 14 inch x 18 inch sheet pans or (2) 12 inch x 20 inch steam Table pans (adjustable to 4 inch O.C.)

Option: Additional Wire Shelves, Electric 208-115v / 60 Hz/ 1 PH, 13.5 amps, 1500 Watts 9’ Power cord and NEMA L14-20P plug, Leg stainless steel adjustable leg

CLIN 0023

WAFFLE BAKER

Cooking surface Diameter size 7 inch Round with 1 burner

Type Single baker cast aluminum grid with silver stone

Construction stainless steel

Shape / base pate Round shape one burner plate base with one handle

Non-stick Coating Control type Digital programmable controls LED display audible alarm, Top mounted control panel

Width: 10 ” within +/- 1” Depth: 18.375” within +/- 1” Height: 8.125 " within +/- 1”

Temperature 250°F- 410°F Electric 120V/60 Hz /1 PH,7.4 amps Wattage 890 Watts Waffles per hr 20 Power cord and NEMA 5-15P plug

CLIN 0024

TOASTER

CONVEYOR

Qualified Energy save

Type horizontal conveyor Construction Stainless steel capacity 6 slices/min , 360 slices per hour

Feeder opening 2 inch Opening Control type electronic controls, Automatic Power Save Mode color guard sensing system Heating source Radiant

Tray Aluminum toast collector tray pan, reomoval crumb tray

Electric

Overall Dimensions

Width: 14-1/2 ” within +/- 1” Depth: 17-3/4” within +/- 1” Height: 14-7/8 " within +/- 1”

Phase 1 Temp Settings Adjustable Electric 120v/60HZ /1-ph, 1.8kw, 14.9 amps Power cord and NEMA 5-15P plug Leg Standard leg

CLIN 0025

QTY: 2 EA

DIGITAL

MICROWAVE

OVEN

Four power levels Type Side hinged door with glass window Stackable YES Construction stainless steel exterior interior capacity 1.2 cu.ft

Timer Ten Minute Dial Timer 4 power level color black Door Grab & Go Door handle Dial control Interior light

Overall Dimensions

Width: 22” within +/- 1” Depth: 19” within +/- 1” Height: 13-3/4 " within +/- 1”

Accommodates A 14" Plate Electric 120 v /60 Hz/1 PH , 15.0 Amps, 1000 watts

Power cord and NEMA 5-15 P Plug

Air Filter Non-Removable

CLIN 0026

Vegetable Peeler w/cabinet base

Cover polyester plastic hopper cover

Type (unit) Vegetable/Potato peeler with Peeler Cabinet Base

Unit Start up Manual Switch Construction welded s/s construction capacity 50-60 lb

Timer Four-minute timer can be adjusted between 30 sec to 5 min increments with Peel Strainer base trap- S/S strainer removable silicon, lexan, and polyester plastic parts with inlets for thorough washing/cleaning

Diameter 21” within +/- 1”

Water Connection Standard ½” Female pipe thread

Overall Dimensions

Depth: 27- 5/8” within +/- 1” Height: 36 5/16 " within +/- 1” motor Electric 115 V /60 HZ. 1 ph, 1 hp

Legs flanged steel legs

CLIN 0027

Electric Fryer

Energy ENERGY STAR QUALIFIED Fryer, Electric Two countdown timers Type deep fat fryer, Floor Model, free-standing Construction stainless steel cabinet and fry tank capacity 50 lbs with Twin fry baskets with plastic coated handles

1-1/4" full port ball type drain valve temperature controls 200° to 390°F stainless steel Removable Splash Guard Stainless steel tank cover/work surface top control Digital Solid State Controls with melt cycles

Overall Dimensions

Width: 15-1/2” within +/-1” Depth: 34-1/8” within +/- 1” Height: 41-1/16 " within +/- 1”

Fry pot depth 15 ½ inches Electric 208v/50-60 Hz./3 ph, 47 amps, standard.

Leg stainless steel leg with casters(2 )locking and (2) non locking, CLIN 0028

Warmer Portable Heated Shelf

Type Surface mounted blanket type Portable Heated Shelf

Construction

Extruded aluminum base with stainless steel top capacity 2 food pan (full size) shape square

Installation type Countertop Control type Thermostatic Settings Adjustable Max temp 200° F Color silver Heating source Blanket-type control electric

Overall Dimensions

Width: 36 ” within +/- 31” Depth: 19-1/2” within +/- 1” Height: 2-1/4 " within +/- 1”

Amps 4.1 amps Electric 120 v / 60 Hz /1 ph, 550 Watts Phase 1 cord and plug Leg Legs with rubber feet

LIN 0029

Type Electric Countertop Griddle Option Stainless steel Stand with under shelf and set of

Electric Countertop Griddle 60X30 208V with Stand (under shelf type ) and Casters

Casters, size: 60 X 30 Construction Heavy duty Stainless Steel Top cooking surface plate

¾ inch steel plate Thick Chrome,57 inch W X 24 inch D (Front -Back) X 17-3/4 inch H

Keating Scraper w/(10) Blades, Hamburger approximately 4 inch W Spatula, Egg Turner Spatula, long handle Palmetto brush, Egg Turner, sample of Keating Klenzer

4.5 inch high back splash, Cabinet: 2 inch Front drain Troughs, 3 inch Left Grease drain Troughs with 4 x 1-1/2 inch drain, Stainless steel grease drawer with handle

Temperature 250 - 550 F Control electric Thermostats 5 each Zoned temperature control Model 60x30 208V Countertop Overall Dimensions

Width: 60.50” within +/- 1” Depth: 30.63” within +/- 1” Height: " within +/- 1”

3 wire terminal block w. ground for field wiring, Electric 208V/60Hz/3 Ph, 13.4 KW, amps: 34,45,34 cord and plug Leg Stainless steel griddle legs

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

The Government shall utilize the source selection criteria as outlined below and evaluate in accordance with the FAR, 13.5 Lowest Price Technically Acceptable Source Selection Process.

a) The basis of award will be determined by means of an integrated assessment of each quote in terms of Technical Acceptability to the Requirement and Price Information. Award will be made in accordance with the FAR Lowest Price Technically Acceptable source selection process (LPTA), to the responsive Offeror (s) whose offer is the lowest price meeting or exceeding the acceptability standards in accordance with the technical specifications in the solicitation. The offer must be determined to be technically acceptable before being considered further. The following factors shall be used to evaluate offers:

1. Evaluation of Non-Cost/Price (Technical)

Technical Acceptability to the Requirement

Product information

Offeror shall submit “Descriptive Literature” as a part of its offer which is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as Design, Materials, Components, Performance characteristics; and, Methods of manufacture, assembly, construction, or operation. This literature shall include pictures of the items.

Adjectival Ratings for Non-Cost/Price (Technical):

The Offeror’s Technical Acceptability to the Requirement will be evaluated to determine if it is acceptable or unacceptable, using the ratings and descriptions outlined in the Table below.

Technical Acceptable/Unacceptable Ratings

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation.

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation.

2. Evaluation of Price

a. The Government shall evaluate the each Offeror's price of each priced Contract Line Item Number (CLIN). An Offeror's quote shall represent the Offeror's best efforts to respond to the solicitation. The evaluated price will be the price of each priced Contract Line Item Number (CLIN). The price of all CLINs will be evaluated by the Contract Team for price reasonableness using price analysis techniques. Award shall be made to the lowest evaluated price of quotes meeting or exceeding the acceptability standards in accordance with the technical specifications in the solicitation.

b. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

SUBMISSION OF OFFERS

*All quotes shall be submitted in English.

SUBMISSION OF QUOTES

Procurement Approach: The Contractor’s quoted item descriptions shall reflect the characteristics and level of quality that will satisfy the Government’s need as described in each CLIN.

The Offeror is required to submit as its quote the following:

(X) Price quote (Solicitation No. M67400-16-T-0113)

(X) Clearly state whether the quoter can meet the required delivery timeframe. Vendors who cannot meet the delivery timeframe, as stated below, will be considered Non-Responsive.

(X) Offeror shall submit three separate volumes: Volume I – Technical Acceptability to the Requirement, Volume II

– Price Quote, and Volume III – Offeror’s Representations and Certifications.

(X) Offeror shall submit “Offered Items Specifications” in Attachment I for each contract line item (CLIN).

Volume I: Technical Acceptability to the Requirement – Offerors shall submit, at a minimum, the following with their quote.

Offeror shall submit “Descriptive Literature” as a part of its offer which is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as Design, Materials, Components, Performance characteristics; and, Methods of manufacture, assembly, construction, or operation. This literature shall include pictures of the items.

Offerors shall submit one (1) original copy and one (1) redacted version (The redacted version is used during the technical evaluation and therefore; it should be without company logo, identifying marks and names must be redacted. Failure to provide a redacted copy may result in a non-responsive determination. The Government will validate Offeror’s redacted company information but will not make changes to the Offeror’s provided redacted proposal either to add or delete redacted text/graphics/etc.).

To ensure technical acceptability:

The manufacturer’s name and manufacturer’s complete part number of items quoted shall be submitted. A mere statement that the Quoter will meet the Government requirement is NOT sufficient.

Technical Information WITH pictures: shall not contain any pricing information but shall include A picture (visual representation, illustration, depiction or photograph) with a detailed description or specification of the item being proposed to ensure adequate technical understanding and compliance of each item.

EVERY SPECIFICATION, FOR EACH ITEM, SHALL BE ADDRESSED FOR COMPLIANCE WITH THE

REQUIREMENTS LIST AND/OR STATEMENT OF WORK. FAILURE TO ADDRESS THE SPECIFICATIONS

REQUESTED SHALL RESULT IN AN UNACCEPTABLE RATING.

The information provided in the specifications section shall be from the manufacturer's specification sheet and shall not be a reiteration (Copy and Paste) of the information from the solicitation.

Include product literature, pictures, commercial warranty information and description of ALL quoted items.

Warranty terms shall be provided for all quoted items.

Approximate:

Measurements that do not say approximate are exact. Approximate means measurements should be within plus or minus 1 inch. Measurements that exceed this shall be considered as alternate items and will be considered as acceptable or unacceptable based on whether or not the measurements of the alternate items offered meet the Marine Corps' requirements in terms of room layout/dimensions.

Volume II: Price Quote

1. Pricing: All quotes submitted shall be the Contractor’s Best Pricing.

All shipping and freight charges to Tracy, CA shall be included in the price of the item. Failure to include the shipping charge in the price of the item may result in a Non-Responsive determination.

2. Pricing terms and conditions: Offerors shall submit their best pricing terms and conditions in accordance with the Government desired pricing terms and conditions

Volume III: Offeror’s Representations and Certifications shall contain all information regarding Offeror’s Representations and Certifications or a validation that System for Award Management (SAM) registration Online Representations and Certifications Application (ORCA) information is up to date and includes all the necessary representations and certifications. Only one (1) original copy shall be submitted for Volume III.

Offeror’s Representations and Certifications at FAR 52.212-3 and FAR 52.209-5 shall be completed.

The following additional information MUST be provided with the quote under Volume III and on a separate page on company letterhead. Failure to provide this information may result in a Non-Responsive Determination.

1. Prompt Payment Terms:

2. Expiration Dates:

3. Parent Name and Federal Tax I.D. No:

4. Company Federal Tax I.D. No:

5. E-Mail Address for POC:

6. Business Size:

7. Remittance Address:

8. Commercial and Government Entity Code (Cage)

9. Data Universal Numbering System (Duns)

10. Verification Of Company Registration In System for Award Management (SAMs):

https://www.fsd.gov/app/sam/

11. Delivery Time

12. U.S. Flag Vessel: (Answer must be yes or no)

13. Place of Manufacture

Note to Offerors:

1) All and any communications/questions pertaining to this solicitation must be submitted in writing to the responsible Contracting Specialist, Koichi Yokogawa no later than 12 AUG 2016 @0800 Japanese Standard Time.

If an Offeror believes that the requirements in these instructions contain an error, omission, or are otherwise unsound, the Offeror shall immediately notify the Contract Specialist in writing with supporting rationale. The Offeror is reminded that the Government reserves the right to award this effort based on the initial quote, as received, without discussions.

Hand Carried:

Regional Contracting Office Attn: Mr. Koichi Yokogawa Bldg #355, MCIPAC Camp Smedley D. Butler, Okinawa, Japan

Phone: 011-81-98-970-3132 (from U.S.) / 098-970-3132 (Local) Fax: 011-81-98-970-0969 (from U.S) / 098-970-0969 (Local)

Email: koichi.yokogawa.ja@usmc.mil

2) Submission of offers: The solicitation must be returned to the address listed above at the date and time specified in combined synopsis/solicitation. Offers may be submitted by email, courier, or facsimile. Facsimile offers are subject to the same rules as paper offers. The Government reserves the right to make award solely on the offers received or enter into “discussions” therefore quoters are cautioned that their initial quotes should contain their best terms from a technical and price standpoint. Offerors bear the burden of ensuring that offers (and any authorized modifications) reach the designated office on time and should allow a reasonable time for facsimile or email transmissions to be completed.

mailto:koichi.yokogawa.ja@usmc.mil

3) Offers may be submitted electronically (emailed); however, due to government computer firewall security, please be advised that it is the Offeror’s responsibility to ensure that the Contracting Office receives all required documents.

4) All pages of the offer must reach the office before the deadline specified on the solicitation. Pages of a facsimile transmission that arrive in the office after the specified deadline will be marked as late. The Offeror bears the risk of non-receipt of facsimile transmissions and should confirm by telephone that any facsimile was received. Any facsimile transmission must clearly state the solicitation number and the name of the Contract Specialist on the first page, to ensure proper receipt.

5) Contract Authority: This solicitation is being conducted under FAR subpart 12 and 13.5.

6) System for Award Management (SAM) Additional Information. All DoD Contractors are now required to be registered within the SAM database prior to award, during performance and throughout final payment of any contract resulting from this request for quotation. Offerors may obtain information on registration and annual confirmation requirements by calling 1-312-463-3376 or via the Internet at: https://www.sam.gov. Registration on line will normally take 5 business days vice the standard 30 days processing time required through other methods.

7) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

8) Offered prices shall not include the Consumption Tax in accordance with paragraph c. FAR Clause 52.229-6 entitled, “Taxes - Foreign Fixed - Price Contracts”.

9) Offerors shall ensure that all correspondence that is addressed to the United States Government is submitted in English or with an English translation.

NOTE: Offeror’s expenses incurred as a result of quote preparation shall not be reimbursed by the U.S. Government.

Delivery: The Government requires delivery 120 days after date of contract.

The following have been deleted:

H-09 Insurance for Japan MAY 2008

(End of Summary of Changes)

1. Evaluation of Non-Cost/Price (Technical)