M6700124Q1049.docx

M6700124Q1049

Section SF 1449 - CONTINUATION SHEET

OPTION SUMMARY

PURPOSE: The purpose of this action is to establish a Purchae Order for the Zeiss Care Complete Package to include the Preventative Maintenance, Accuracy Verification, Calibration and CALYPSO software maintenance on the ZMC550 and RT05-400 Rotary Table as required by Fleet Readiness Center East (FRCE) aboard MCAS Cherry Point, NC. All services shall be performed in accordance with the Performance Work Statement.

TERMS OF PURCHASE ORDER: The contractor shall provide the services specified herein for a base period of twelve (12) months with provisions for two (2) twelve-month option period. The option periods may be exercised at the discretion of the Government in accordance with FAR 52.217-9 “Option to Extend the Term of the Contract” (MAR 2000).

PERIODS OF PERFORMANCE AND VALUE: The periods of performance and dollar values for each are as follows:

PERIOD OF PERFORMANCE ESTIMATED VALUE

Base Period $ ________________ CLIN 0001 and 0003 One (1) Year After Date of Award

First Option Year $ ________________ CLIN 1001 and 1003 One (1) Year After Base Year

Second Option Year $ ________________ CLIN 2001 and 2003 One (1) Year After First Option Year

* TOTAL ESTIMATED VALUE $ ________________

* To be provided at time of Award.

Software Maintenance Agreement

FFP

For ZMC 550 CMM, s/n 88580, asset 65889-411586, location 4225, shop 91302

NWA 300000169266.0260

FOB: Destination

MILSTRIP: N6592324SU00057

PURCHASE REQUEST NUMBER: N6592324SU00057

PSC CD: J052

NET AMT

Calibration & Maintenance

For ZMC550 Coordinate Measuring Machine and RT-05-400 Rotary Table

Manufacturer: Carl Zeiss Industrial Quality Solutions, LLC.

Part: ZMC550 Coordinate Measuring Machine Serial Number: 88580 Asset Number: 65889-411586

Part: RT05-400 Rotary Table Serial Number: 85509

Location: Building 4225 Shop: 91302

NWA 300000169266 0270

FOB: Destination

MILSTRIP: N6592324SU00057

NET AMT

Emergency Repair Service

For ZMC550 Coordinate Measuring Machine and RT-05-400 Rotary Table

Manufacturer: Carl Zeiss Industrial Quality Solutions, LLC.

Part: ZMC550 Coordinate Measuring Machine Serial Number: 88580 Asset Number: 65889-411586

Part: RT05-400 Rotary Table Serial Number: 85509

Location: Building 4225 Shop: 91302

NWA 300000175563 3060

MILSTRIP: N6592324SU00057

NET AMT

PERFORMANCE WORK STATEMENT

All work to be performed under this contract shall be performed by Technicians thoroughly trained and knowledgeable in the operation and maintenance of the equipment specified. All services are to be performed in a highly professional manner.

1. The contractor shall provide the Zeiss Care Complete Package to include the Preventative Maintenance and Accuracy Verification, Calibration and CALYPSO software maintenance on the ZMC550 located in the Zeiss lab, Building 4225. The preventative maintenance shall be performed during the month of July, between the hours of 6:00 AM and 5:00 PM Monday through Friday. This schedule may be modified by mutual agreement by the contractor and the government.

0. The services shall include, but are not limited to the following:

1. Check and adjustment of CMM leveling.

1. Check and adjustment of CMM air bearings.

1. Check and adjustment of the mechanical system.

1. Check and adjustment of the electronic system.

1. Check and adjustment of the measuring system.

1. Optimize Accuracy and performance using “CALYPSO” software.

1. Perform Accuracy Verification.

1. Readjustment of plate and X guide way (SMM only)

1. Report of any unusual conditions not covered by routine preventive maintenance as soon as they are noted and recommend a possible solution.

1. Rotary Table

1. Contractor shall furnish all replacement parts (including repair or replacement of probes and probe systems) as well as shipping and handling costs, as required to keep the system in good working condition. These parts shall be new or equivalent to new in performance.

2.0 The contractor shall check in upon arrival and check out prior to departure with the Equipment, Facilities & Services Specialist located in Building 84. The contractor shall furnish a signed malfunction/service report to the Equipment, Facilities & Services Specialist (252-464-9366) located in Building 84 upon completion of each on-site visit. Authorization for payment will be withheld unless the service report is provided. The report shall include, as a minimum, the following information:

1. Date and time notified

1. Date and time of arrival

1. Type, Model and Serial Number(s) of equipment.

1. Location of machines

1. Description of malfunction(s) and/or condition

1. Identified cause of the malfunction (if applicable)

1. All actions taken to correct the problem, including repair parts replaces or services rendered to include quantities

1. Date and time of departure

1. 3.0 Calibration with Accuracy Verification. The calibration/accuracy verification visit shall be performed along with the preventive maintenance visit during the months stated above in 1.0. The contractor shall at a minimum be accredited to ISO 17025 Standards. The contractor shall also provide an annual written certification of calibration, and shall follow the VDI/VDE 2617 standards using standards traceable back to the National Institute of Standards and Technology (N.I.S.T.). The certification shall be submitted with two (2) copies to the Equipment, Facilities & Services Specialist, (252-464-9366) located in Building 84. All out of tolerance values shall be documented in writing and include the required tolerance as well as the out of tolerance values and submitted to the Equipment, Facilities & Services Specialist, (252-464-9366) located in Building 84 as well as the Operations Manager of the PMC shop 23200 (252-464-8313) or email CHPZ_PMC_SUPPORT@us.navy.mil.. The Calibration with Accuracy Verification shall include, but not be limited to the following:

a. Check and adjust as required:

1. Joystick

1. Machine Electronics

1. Probe Head

1. Phocosin

1. Optimize accuracy and performance using “CALYPSO” software

1. CMM anti-vibration system (if provided by Zeiss)

1. Rotary Table

b. Verification:

1. Check and adjust CMM repeatability.

1. Machine at least will meet the required verifications of the ISO 10360.

c. Report to be sent to FRC East shall include:

1. Statement of verification acceptance or rejection. If the machine is rejected, a list of possible solutions along with a suggested plan to correct the problems will be supplied. If the machine is in tolerance, a certification of U95 compliance will accompany the report.

1. A Certification sticker shall be immediately placed on the Machine and a Certificate of Accuracy issued upon the completion of the Certification.

1. All of the Equipment shall include an annual written certification of calibration traceable back to the National Institute of Standards and Technology (N.I.S.T.). The certification shall be ISO 17025 A2LA accredited calibration. Performed in accordance with ISO 10360 procedures. The certification shall be submitted with two (2) copies and left with the Equipment, Facilities & Services Specialist, (252-464-9366) located in Building 84. Service Report shall include as found values and required tolerances, as well as the out of tolerance values, and submitted to the Equipment, Facilities & Services Specialist, (252-464-9366) located in Building 84 as well as the Operations Manager of the PMC shop 23200 (252-464-8313) or email CHPZ_PMC_SUPPORT@us.navy.mil.

4.0 A service report shall be presented on completion of the Emergency Visit to the Equipment, Facilities & Services Specialist, (252-464-9366) located in Building 84. The report shall include, as a minimum, the following information:

1. Date and time notified

1. Date and time of arrival

1. Type, Model and Serial Number(s) of equipment.

1. Location of machines

1. Description of malfunction(s) and/or condition

1. Identified cause of the malfunction (if applicable)

1. All actions taken to correct the problem, including repair parts replaces or services rendered to include quantities

1. Date and time of departure

5.0 The contractor shall provide CALYPSO software licenses, upgrades and technical support. The CALYPSO software shall include but is not limited to the following:

1. Upgrades to current versions of software and patch upgrades.

1. Unlimited technical support.

6.0 Software, upgrades, releases, etc., shall be mailed/electronically provided to the technical POC listed below:

7.0 Prior to effecting any additional services, repairs, or parts not covered under this contract, the technician shall contact the Maintenance Planning Branch (252-464-9366). If determined to be in the best interest of the Government, the Contracting Officer will issue a purchase order for the additional services, parts, repairs, and any other requirements not covered by this contract. The Government will be under no obligation to reimburse the contractor for performance of any work not covered by this contract.

8.0 The Customer Point of Contact for this contract shall be 76200, Command Operations Acquisition Procurement Division, Simplified Acquisition Procurement Support (SAPS), Services Branch.

Primary: Jonathan Jarman jonathan.t.jarman.civ@us.navy.mil

1. Primary: Heather Unruh, heather.r.unruh.civ@us.navy.mil, 252-464-5535

1. Alternate: Kari Wilson, kari.s.wilson.civ@us.navy.mil, 252-464-9163

Performance Requirement Summary (PRS)

-Timeliness

- Quality -Accuracy

-Timeliness

- Quality -Accuracy

UNAUTHORIZED WORK PERFORMANCE

The Contractor shall not perform work that deviates from contract requirements and the Performance Work Statement. If the Contractor deviates from contract requirements and Performance Work Statement without approval of the CONTRACT ADMINISTRATOR/CONTRACTING OFFICER, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

BASIS FOR AWARD

The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and will be most advantageous to the Government. The award will be made using simplified acquisition procedures and the best value. To determine the best value a comparative assessment of the quoter’s price, technical acceptability, and other factors identified elsewhere in the solicitation.

CONTRACT ADMINISTRATION

1.0 CONTRACT ADMINISTRATION FOR THE GOVERNMENT

a) The following representative of the Contracting Office shall be contacted for contract administration purposes:

Name: Jamie L. Johnston Phone: (252) 466-2022 Email: jamie.l.johnston@usmc.mil

2.0 COMMUNICATIONS

a) Except as specified in paragraph (b) below, no order, statement, or conduct of Government personnel who visit the contractor’s facilities or in any other manner communicate with contractor personnel during the performance of this contract shall constitute a change under the “Changes” clause of this contract.

b) The contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and is signed by the Contracting Officer or is pursuant to specific authority otherwise included as a part of this contract.

c) A Contracting Officer for the Marine Corps Installations East (MCI East) Contracting Office, is the only person authorized to approve changes in any of the requirements of this contract and, notwithstanding, provisions contained elsewhere in this contract, the said authority remains solely the Contracting Officer’s. In the event the contractor effects any changes at the direction of any person other than a designated Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made.

d) The contact information for the Contracting Officer is:

Name: Larry Davis Phone: (252) 466-7765 Email: larry.davis1@usmc.mil

CONTRACTOR BASE ACCESS

1. Contractor Access to Marine Corps Installation and the Fleet Readiness Center East

1.1 Performance of this requirement requires access to Marine Corp Air Station (MCAS) Cherry Point and the Fleet Readiness Center (FRC) East. Contractor personnel shall follow all procedures for access to the Air Station in accordance with Air Station Order (ASO) 5560.6A, available at: http://www.cherrypoint.marines.mil/Portals/86/Docs/Cherrypointorders/5560.6A.pdf?ver=2016-03-29-110019-410 and FRC East Instruction 5000.1B, Enclosure 1, available at: http://www.navair.navy.mil/frce/sites/g/files/jejdrs421/files/2018-11/5000.1B%20JUNE%202017%20enc1.pdf

Both the ASO and FRC East Instruction can be requested upon award if the vendor has any issues accessing the provided links. Separate access requests are required for Base Access and FRC East access. Please note, due to the Real ID Act, some state driver’s licenses will not be accepted without a second form of identification, like a passport.

1.2 Marine Corps Installations transition to new access control system

Marine Corps Installations across the region are transitioning to a new government-owned access control system called Defense Biometric Identification System (DBIDS). This new and enhanced system will replace RAPIDGate and MCESS for contractors and other non-DoD-affiliated personnel requiring installation access. DBIDS is already installed at more than 320 sites with over 5 million registered personnel and unlike previous systems, this one is a free service.

Current RAPIDGate or MCESS credentials can easily be switched out for a DBIDS credential and new contractors can apply for a DBIDS credential using the same vetting requirements as previously required. RAPIDGate/MCESS credentials will be honored until December 31, 2018. After this date, all contractors will be required to have a DBIDS credential in order to access MCAS Cherry Point. In order to reduce wait time when exchanging your RAPIDGate/MCESS credential, it is highly recommended each applicant pre-register at https://dbids-global.dmdc.mil/enroll#!/.

Here’s what you need to know:

Current DOD ID Card Holders

. If you currently hold a valid Common Access Card (CAC), dependent ID card, reserve ID card, or retiree ID card, issued by the Defense Enrollment Eligibility Reporting System (DEERS), no further action is required.

. You will be automatically enrolled in DBIDS when your ID card is initially scanned at the gate. Expect a one-time delay of 3-6 seconds as the DBIDS system initially registers your information.

Current Contractors

. DBIDS credentials will be issued beginning September 24, 2018

. DBIDS credentials will be valid for the duration of your contract, not to exceed five years; however, re-vetting of individuals’ information will occur each year.

. Contractors can exchange their current RAPIDGate/MCESS credential for a DBIDS credential without re-vetting, however they will be required to bring the following items:

- Current RAPIDGate/MCESS credential

- Second form of government-issued identification (driver license, passport, etc.)

- Company Contract/Letter of Authorization

New DBIDS credentials will be valid for the remainder of the contract (not to exceed 5 years), but individuals will be re-vetted each year.

All contractors (MCAS Cherry Point) will be able to exchange their current RAPIDGate/MCESS credential at the MCAS Cherry Point Contractor Vetting Office, Building 251 (Pass and ID).

Note: Flight line access will still be granted at Physical Security using the procedures already in place.

New Contractors

DBIDS credentials will be issued beginning September 24, 2018

New contractors requiring access for over 60 days will receive a credential valid for up to one year.

New contractors requiring access for less than 60 days will receive a temporary paper pass.

Reminder: Beginning October 1, 2018, all personnel in possession of a RAPIDGate/MCESS credential will also be required to provide a second valid U.S. government form of identification. Beginning September 24, 2018, DBIDS credentials will be issued or exchanged in place of a RAPIDGate/MCESS credential. The last day RAPIDGate/MCESS credentials will be authorized for entry onto the installation is December 31, 2018.

More information on DBIDS can be accessed by current CAC holders at https://dbids.dmdc.mil/#!/resources.

If you have questions regarding the exchange of a current RAPIDGate/MCESS credential for DBIDS or you are a new contractor seeking enrollment into DBIDS, please contact the Contractor Vetting Office at (252) 466- 4685/5921/3066/3461.

1.3 The point of contact for this requirement is: Deborah Smith (252) 464-2963. Note: There is no visit request form. A visit request may be in the form of an email or fax submitted on company letterhead and must contain the following information:

(a) Last name, first name, middle name, place of birth, last four digits of social security number, and citizenship.

(b) Name of the FRC point of contact and their phone number.

(c) Purpose of visit, if classified/unclassified visit, dates of visit (one year maximum), company name, POC and phone number.

(d) Include a statement affirming that the FRC EAST Information Brochure was read and understood by all visitors/contractors listed on the visit request. If a visitor/contractor has not rea the FRC EAST Information Brochure prior to their arrival, a copy may be obtained by their sponsor on the CP-Web under Security (Physical Security) “FRC EAST ACCESS CONTROL – FRCEASTINST 5000.1B CH-1 Encl: (1)” or at Building 137, Security Guard Post 1.

1.4 Additional information regarding access to the Air Station is available by phone at (252) 466-5921. Additional information regarding access to the FRC East is available by phone at (252) 464-7397 or by accessing the FRC East web-site at http://www.navair.navy.mil/frce/visinfo.html. Failure to submit the proper visit request information may result in denial of access to the facility.

1.5 The MCAS Cherry Point main gate is located off NC State Highway 101, Havelock, NC. Visitors without proper vehicle identification are required to check-in at the visitor’s center adjacent to the main gate.

2.0 Identification of Contractor Personnel

Contractor personnel shall identify themselves as contractor personnel by introducing themselves or when being introduced. Contractor personnel shall display distinguishing badges or other visible identification for meeting with Government personnel. Contractor personnel shall appropriately identify themselves as contractor employees in telephone conversations and in formal and informal written correspondence.

3.0 Work Performed on Marine Corp Installations

3.1 The worked described herein for the A-4M Skyhawk Aircraft shall be performed at 4335 C Street, MCAS Cherry Point, NC. The work shall be performed during the FRC East’s normal working hours, excluding federal holidays, Monday through Friday 7:00 am to 3:30 pm unless otherwise requested by the contractor and approved in advance by the Government.

3.2 During the course of contract performance the contractor, as a resident of the installation and facility, shall adhere to all rules and regulations in effect at Marine Corps Air Station Cherry Point and the FRC East. Contractors are required to comply with all Federal and North Carolina State Environmental, Security, and Safety Compliance requirements along with other command policies as stated in the FRC East Information Brochure. Failure to adhere to these requirements may result in suspension or debarment of the individual employees and/or the contractor.

3.3 The contractor shall report any accidents or injuries occurring on site to the FRC East Safety Office via telephone:

Safety Office – (252) 464-7015

Fire Department – 911

Fire Department Dispatch – (252) 466-3616

Plant Engineering – (252) 464-7640

Quality Department – (252) 464-9397

ISO 14001 Management Rep – (252) 464-9814 or (252) 464-8412

Security – (252) 464-7999

Hazardous Material Program Manager – (252) 464-8051

Environmental Office – (252) 464-8042

ADDENDUM TO 52.212-1

SUBMISSION OF QUOTES.

1. The vendor is responsible for ensuring that quotes are received in the Contracting Office no later than 12:00 P.M. (EDT) on 7 March 2024 as indicated on page one (1) of this solicitation. Failure of vendor’s quote to be received prior to the hour and date specified may result in rejection of the quote.

1. Quotes shall be submitted electronically via e-mail to jamie.l.johnston@usmc.mil

1. RFQ Number M6700124Q1049 must be clearly shown in the subject line.

2) INSTRUCTIONS FOR THE PREPARATION OF QUOTES: The vendor shall submit the following as part of their quote:

a) Information that demonstrates the vendor’s ability to provide the services/supplies in accordance with the requirements of the Performance Work Statement by the required delivery date.

b) Quoted firm-fixed price for each line item shown – for completion of all supplies/services in accordance with the requirements of the Performance Work Statement.

c) Vendor must include unit price and total amount for each line item. Vendor shall quote FOB Destination pricing.

1. Completed SF1449 to include:

i) Signed/completed page 1 (Blocks 17 and 30)

ii) Completed Representations and Certifications: The following representations and certifications must be completed and returned as part of the vendor’s quote

FAR 52.212-3 (Note that vendor is only required to complete paragraph (b) if they have not completed annual representations and certifications via the System for Award Management (SAM) website.)

ADDENDUM TO 52212-4(C)

Unilateral administrative changes (e.g. change in the paying office, line of accounting, cost code or the appropriation data, changing points of contact or telephone numbers, and correct typographical errors) are authorized under this section, so long as the written purchase order change does not affect the substantive rights of the parties and is consistent with customary commercial practices.

SALES TAX EXEMPTION

The Contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

JAMES HARRUP

FLEET READINESS CENTER EAST DLA

BEACHY RD. BUILDING 148, BAY C

CHERRY POINT NC 28533-5040

252-464-8602

N65923

N65923

N65923

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2023) ALTERNATE I (OCT 2014)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1001", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

"Veteran-owned small business concern" means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 125.18(b)(1) and (2). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .] Each service-disabled veteran-owned small business concern participating in the joint venture shall provide representation of its service-disabled veteran-owned small business concern status.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(6) WOSB joint venture eligible under the WOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .

(7) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _________

(10) HUBZone small business concern. [Complete only if the offeror…