Attachment 1 1A3414rev E.pdf
PDF 468 KB Posted
- Attached to
- LPC 1st Stage Vanes Federal contract opportunity
- Solicitation number
- M6700123Q1170
- Issued by
- United States Marine Corps
About this file
This modification drawing outlines the process for reworking low pressure compressor vanes for the AV-8B aircraft. The drawing provides instructions for removing existing damping foils, applying a low plasticity burnishing process, reapplying new damping foils, and reidentifying the vanes with new part numbers. The modification process aims to improve the vanes' durability and incorporate engineering changes. Sheets provide details on tasks such as foil dimensions and locations, as well as diagrams to identify individual vanes' new part numbers. The related federal contract opportunity is a special notice for low pressure compressor stage one vanes, indicating the U.S. Marine Corps is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| M6700123Q1170 Amendment 0001.docx | DOCX document | |
| Attachement 2 S000041 Rev F.pdf | ||
| M6700123Q1170.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REVISION HISTORY
REV DESCRIPTION CHECKED DATE APPROVED
A MODIFIED DRAWING TO INCORPORATE VANES PRE-
FOILED PER (K0378) B518775. ADDED SHEETS 5 AND 6.
FRANK
PAKE
2007-08-09 GEORGE
RUSSELL
B SHEET 4, NOTE B; LINED THROUGH DELETED TEXT. HOLTZWORTH 2010-02-08 RUSSELL
C MODIFIED DRAWING TO INCORPORATE ECP 3918.
ADDED (K0378) B519394 VANE FOR RE-WORK.
JOYCE ARMSTRONG
2013-06-11
GEORGE RUSSELL
2013-06-21
D MODIFIED DRAWING TO INCORPORATE (K0378) B518779
AND (K0378) B518780 MK107 VANES FOR RE-WORK AND RE-
IDENTIFICATION. ADDED SHEETS 7, 8, AND 9.
JOYCE ARMSTRONG
2013-08-21
CHRIS GOSNELL
2013-08-21
E MODIFIED DRAWING TO INCORPORATE CHPT ECP CP-F402-
012 TO APPLY LPB AND/OR TO REMOVE DAMPING FOILS.
ADDED (96916) 1A3414-1 AND (96916) 1A3414-2 VANES FOR
REWORK. ADDED SHEETS 2.1, 3.1, 6.1 AND 10.
MODIFICATION DRAWING
SOURCE CONTROL DRAWING
E E E E E
10 9 8 7 6.1 AV-8B
E E E E E E E E REV REV
STATUS
NEXT ASSY USED ON
6 5 4 3.1 3 2.1 2 1 SH APPLICATION
DESTRUCTION NOTICE-FOR UNCLASSIFIED,
LIMITED DOCUMENTS, DESTROY BY ANY METHOD
THAT WILL PREVENT DISCLOSURE OF CONTENTS
OR RECONSTRUCTION OF THE DOCUMENT.
FOR CLASSIFIED DOCUMENTS, FOLLOW THE
PROCEDURES IN DOD 5200.22-M.
DISTRIBUTION STATEMENT C-DISTRIBUTION AUTHORIZED TO U.S.
GOVERNMENT AGENCIES AND THEIR CONTRACTORS TO PROTECT TECHNICAL
DATA REQUIRED FOR OFFICIAL USE AND FOR ADMINISTRATIVE OR
OPERATIONAL PURPOSES ONLY, DETERMINED ON 16 JANUARY 1996. OTHER
REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO COMMANDING
OFFICER, FLEET READINESS CENTER EAST, MARINE CORPS AIR STATION,
CHERRY POINT, N.C. 28533.
CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY
DRAWN THOMAS GERRALD 2007-02-14 IN SERVICE SUPPORT CENTER
U.S. MARINE CORPS AIR STATION
CHERRY POINT, N. C.
CHECKED LAWRENCE HOLTZWORTH 2007-05-03
ENGINEER
ENGINEER TITLE
LPC1 STATOR VANE- MODIFICATION,
DAMPING FOIL AND LPB PROCESS
ENGINEER
OSH
APPROVED CHRIS GOSNELL 2007-05-03
SIZE
A
CAGE CODE
96916
DWG NO.
1A3414
REV
E
SCALE
NONE
REF
SHEET
1 OF 10 FILE NO.: S:/REL/GEN/1A3414
NOTES:
1. THIS DRAWING WAS DEVELOPED TO THE FOLLOWING STANDARDS/SPECIFICATIONS:
ASME Y14.100-2004, ENGINEERING DRAWINGS PRACTICES
ASME Y14.5M-1994, DIMENSIONING AND TOLERANCING
2. THIS DRAWING ASSIGNS RE-IDENTIFICATION OF THE F402 LOW PRESSURE (LP) COMPRESSOR VANE, (K0378) B516434, (K0378) B518775, (K0378) B518779, (K0378) B518780, (K0378) B519394, (96916) 1A3414-1, AND (96916) 1A3414-2, AFTER COMPLETION OF THE FOLLOWING MODIFICATION PROCESS:
STEP (1): APPLICABLE ONLY TO (K0378) B518775, (K0378) B518779, (K0378) B518780, (96916) 1A3414-1, AND (96916) 1A3414-2 LP COMPRESSOR VANES. REMOVE EXISTING DAMPING FOILS IAW
AYC 1418 AYC 1697.
STEP (2): APPLICABLE ONLY TO (K0378) B518779 LP COMPRESSOR VANE. REMOVE PIN AND RE- IDENTIFY AS B518780 IAW AYC 1418 AYC 1697. REFER TO VIEW C ON SHEET 8, AND SHEET 9.
STEP (3): APPLICABLE ONLY TO (K0378) B516434, (K0378) B518775, (K0378) B518780, AND (K0378) B519394
LP COMPRESSOR VANES. COMPLETE THE LOW PLASTICITY BURNISHING (LPB) PROCESS PER
PARAGRAPH 3. AFTER THE COMPLETION OF THIS STEP, RE-IDENTIFY PART BY VIBRO PERCUSSION ENGRAVING (96916) 1A3414 IAW DETAIL ON SHEET 4, MIL-STD-130, AND NAVAIR A1-F402B-SPM-000, WORK PACKAGE 008 00, PROCESS MP2. VIBRO PERCUSSION ENGRAVE A LINE THROUGH PREVIOUS
PART NUMBER. MAINTAIN READABILITY.
STEP (4): COMPLETE THE DAMPING FOIL APPLICATION PROCESS PER PARAGRAPH 4. AFTER THE
COMPLETION OF THIS STEP, PART WILL BE RE-IDENTIFIED IAW PARAGRAPH 5.
3. VANE SHALL BE TREATED TO THE LPB PROCESS AND VANE ZONE LOCATIONS GIVEN IAW DRAWING
NUMBER (3AV35) S000041, TITLED “F402, STG 1 LPC,-LPB PROCESS”, AS DEVELOPED BY:
SURFACE ENHANCEMENT TECHNOLOGIES
3929 VIRGINIA AVENUE
CINCINNATI, OHIO 45227
4. VANE SHALL BE LAYERED WITH FOIL ON THE AEROFOIL SURFACE AND DIMENSIONALLY LOCATED AS REQUIRED IAW VIEW A, SHEET 5 AND VIEW B, SHEET 7 AS APPLICABLE. USE PROCESS FOR FOIL
APPLICATION/ADHERENCE AS DESCRIBED IN AYC 1418.
IN SERVICE SUPPORT CENTER
U. S. MARINE CORPS AIR STATION
CHERRY POINT, N.C.
DRAWN THOMAS GERRALD 2007-02-07 SIZE
A
CAGE CODE
96916
DWG NO.
1A3414
REV
E
CHECKED L. HOLTZWORTH 2007-05-03
ENGINEER CHRIS GOSNELL 2007-05-03
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 2
christopher.gosnell Highlight
5. FOR VANES PREVIOUSLY IDENTIFIED AS (K0378) B516434, (K0378) B518775, AND (K0378) B519394:
RE-IDENTIFY VANE AT LOCATION SHOWN ON VIEW A, SHEET 5 AND SHEET 6.1 BY VIBRO
PERCUSSION ENGRAVING “-1” “-3” TO COMPLETE PART NUMBER (96916) 1A3414-1 1A3414-3 IAW MIL-
STD-130 AND MANUAL A1-F402B-SPM-000, WORK PACKAGE 008 00, PROCESS MP2.
FOR VANES PREVIOUSLY IDENTIFIED AS (K0378) B518780:
RE-IDENTIFY VANE AT LOCATION SHOWN ON VIEW B, SHEET 7 AND SHEET 10 BY VIBRO PERCUSSION ENGRAVING “-2” “-4” TO COMPLETE PART NUMBER (96916) 1A3414-2 1A3414-4 IAW MIL-STD-130 AND
MANUAL A1-F402B-SPM-000, WORK PACKAGE 008 00, PROCESS MP2.
FOR VANES PREVIOUSLY IDENTIFIED AS (96916) 1A3414-1:
RE-IDENTIFY VANE AT LOCATION SHOWN ON VIEW A, SHEET 5 AND SHEET 6 BY VIBRO PERCUSSION
ENGRAVING A LINE THROUGH “-1” IAW MIL-STD-130 AND MANUAL A1-F402B-SPM-000, WORK
PACKAGE 008, PROCESS MP2. VIBRO PERCUSSION ENGRAVE “-3” TO COMPLETE PART NUMBER (96916)
1A3414-3. MAINTAIN READABILITY.
FOR VANES PREVIOUSLY IDENTIFIED AS (96916) 1A3414-2:
RE-IDENTIFY VANE AT LOCATION SHOWN ON VIEW B, SHEET 7 AND SHEET 9 BY VIBRO PERCUSSION
ENGRAVING A LINE THROUGH “-2” IAW MIL-STD-130 AND MANUAL A1-F402B-SPM-000, WORK
PACKAGE 008, PROCESS MP2. VIBRO PERCUSSION ENGRAVE “-4” TO COMPLETE PART NUMBER (96916)
1A3414-4. MAINTAIN READABILITY.
6. WHERE A CONFLICT ARISES WITH THIS DOCUMENT AND THE AFOREMENTIONED DOCUMENTS, THIS
DOCUMENT SHALL TAKE PRECEDENCE.
7. IDENTIFICATION OF THE APPROVED SOURCE OF SUPPLY HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY FOR THE ITEM
DESCRIBED.
DRAWN JOYCE ARMSTRONG 2014-11-06 SIZE
96916
DWG NO.
1A3414
REV
E
CHECKED
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 2.1
1 K0378 B518779 VANE, COMPRESSOR- REWORKED TO NOTE 2, STEP 2
K0378 B518780 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-2
1 K0378 B519394 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-1
K0378 B518775
K0378 B516434
1 1 K0378 B518778 OUTER DAMPING FOIL
1 1 K0378 B518777 MIDDLE DAMPING
FOIL
1 1 K0378 B518776 INNER DAMPING FOIL
X 1A3414-2 MK107 LPC1 STATOR
VANE-MODIFICATION,
DAMPING FOIL AND
LPB PROCESS
X 1A3414-1 LPC1 STATOR VANE-
MODIFICATION,
DAMPING FOIL AND
QTY
-2
QTY
-1
CAGE PART
NUMBER
DESCRIPTION STOCK MATERIAL MATERIAL
SPEC
PARTS LIST
IN SERVICE SUPPORT CENTER
U. S. MARINE CORPS AIR STATION
CHERRY POINT, N.C.
DRAWN THOMAS GERRALD 2007-02-07 SIZE
A
CAGE CODE
96916
DWG NO.
1A3414
REV
E
CHECKED L. HOLTZWORTH 2007-05-03
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 3
K0378 B518779 VANE, COMPRESSOR- REWORKED TO NOTE 2, STEP 2
K0378 B518780 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-4
96916 1A3414-2 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-4
K0378 B519394 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-3
K0378 B518775 K0378 B516434
96916 1A3414-1 VANE, COMPRESSOR- REWORKED TO (96916) 1A3414-3
X 1A3414-4 MK107 LPC1 STATOR
VANE-MODIFICATION,
X 1A3414-3 LPC1 STATOR VANE-
MODIFICATION, LPB
PROCESS
QTY
-4
QTY
-3
CAGE PART
NUMBER
DESCRIPTION STOCK MATERIAL MATERIAL
SPEC
PARTS LIST
IN SERVICE SUPPORT CENTER
U. S. MARINE CORPS AIR STATION
CHERRY POINT, N.C.
DRAWN JOYCE ARMSTRONG 2014-11-06 SIZE
A
CAGE CODE
96916
DWG NO.
1A3414
REV
E
CHECKED
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 3.1
END VIEW- LPC1 STATOR VANE
SEE NOTE 2, STEP 3
(AS APPLICABLE)
SEE NOTE 2, STEP 3
(AS APPLICABLE)
NOTES: (A) VIBRO PERCUSSION ENGRAVE A LINE THROUGH THE EXISTING PART NUMBER AS
SHOWN. MAINTAIN READABILITY.
(B) NEW PART NUMBER SHALL BE APPLIED AS LIGHTLY AS POSSIBLE. IT SHOULD BE
CLEAR AND LEGIBLE, AND AS SMALL AS POSSIBLE TO ALLOW FOR FUTURE
ADDITIONAL MARKING SPACE.
IN SERVICE SUPPORT CENTER
U. S. MARINE CORPS AIR STATION
DRAWN THOMAS GERRALD 2007-02-07 SIZE
96916
DWG NO.
1A3414
REV
E
CHECKED L. HOLTZWORTH 2007-05-03
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 4
VIEW A VIEW A
FOR -1 ONLY FOR -3 ONLY
IN SERVICE SUPPORT CENTER
U. S. MARINE CORPS AIR STATION
DRAWN THOMAS GERRALD 2007-07-25 SIZE
96916
DWG NO.
1A3414
REV
E
CHECKED FRANK PAKE 2007-08-02
ENGINEER GEORGE RUSSELL 2007-08-02
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 5
END VIEW- LPC1 STATOR VANE END VIEW- LPC1 STATOR VANE
SEE NOTE 5 AND SHEET 5 SEE NOTE 5 AND SHEET 5
FOR -1 ONLY FOR -3 ONLY
NOTES: (A) DASH NUMBER SHALL BE ADDED TO THE EXISTING (96916) 1A3414 GENERATED IN
NOTE 2, STEP 3.
(B) FOR VANES PREVIOUSLY IDENTIFIED AS (96916) 1A3414-1, ONLY THE DASH NUMBER “-1”
SHALL BE VIBRO PERCUSSION ENGRAVED THROUGH IN NOTE 5. THE NEW DASH NUMBER
SHALL BE ADDED FOLLOWING THE MARKED THROUGH “-1”.
CHERRY POINT, N.C.
DRAWN THOMAS GERRALD 2007-07-25 SIZE
A
CAGE CODE
96916
DWG NO.
1A3414
REV
E
CHECKED FRANK PAKE 2007-08-02
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 6
SEE NOTE 5 AND SHEET 5
FOR -3 ONLY
NOTES: (A) DASH NUMBER SHALL BE ADDED TO THE EXISTING (96916) 1A3414 GENERATED IN
NOTE 2, STEP 3.
96916
DWG NO.
1A3414
REV
E
CHECKED
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 6.1
VIEW B VIEW B
FOR -2 ONLY FOR -4 ONLY
96916
DWG NO.
1A3414
REV
E
CHECKED FRANK PAKE 2007-08-02
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 7
(K0378) B518779
LK71369 PIN INSTALLED
(K0378) B518780 END VIEW-LPC1 STATOR VANE
LK71369 PIN REMOVED SEE NOTE 2, STEP (2)
SEE NOTE 2, STEP (2)
VIEW C
96916
DWG NO.
1A3414
REV
E
CHECKED FRANK PAKE 2007-08-02
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 8
SEE NOTE 5 AND SHEET 7 SEE NOTE 5 AND SHEET 7
SEE NOTE 5 AND SHEETS 7 AND 8 SEE NOTE 5 AND SHEET 7
FOR -2 ONLY FOR -4 ONLY
(B) FOR VANES PREVIOUSLY IDENTIFIED AS (96916) 1A3414-2, ONLY THE DASH
NUMBER “-2” SHALL BE VIBRO PERCUSSION ENGRAVED THROUGH IN NOTE 5.
THE NEW DASH NUMBER SHALL BE ADDED FOLLOWING THE MARKED THROUGH “-2”.
96916
DWG NO.
1A3414
REV
E
CHECKED FRANK PAKE 2007-08-02
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 9
SEE NOTE 5 AND SHEET 7
SEE NOTE 5 AND SHEET 7
FOR -4 ONLY
96916
DWG NO.
1A3414
REV
E
CHECKED
FILE NO.: S:/REL/GEN/1A3414 SCALE NONE REF SHEET 10
| A: | |
| MODIFIED DRAWING TO INCORPORATE VANES PRE FOILED PER K0378 B518775 ADDED SHEETS 5 AND 6: | |
| FRANK PAKE: | |
| 20070809: | |
| GEORGE RUSSELL: | |
| C: | |
| D: | |
| E: | |
| E_2: | |
| 61: | |
| AV8B: | |
| E_3: | |
| E_4: | |
| DRAWN: | |
| THOMAS GERRALD: | |
| LAWRENCE HOLTZWORTHENGINEER: | |
| 20070503ENGINEER: | |
| LAWRENCE HOLTZWORTHENGINEER_2: | |
| 20070503ENGINEER_2: | |
| LAWRENCE HOLTZWORTHENGINEER_3: | |
| 20070503ENGINEER_3: | |
| LAWRENCE HOLTZWORTHOSH: | |
| 20070503OSH: | |
| TITLE LPC1 STATOR VANE MODIFICATION DAMPING FOIL AND LPB PROCESS: | |
| APPROVEDRow1: | |
| CHRIS GOSNELLRow1: | |
| 20070503Row1: | |
| FILE NO SRELGEN1A3414: | |
| SCALE NONE: | |
| REF: | |
| SHEET 1 OF 10: | |
| 20070207: | |
| 20070503: | |
| 20070503_2: | |
| REV E: | |
| FILE NO SRELGEN1A3414_2: | |
| REF_2: | |
| SHEET 2: | |
| JOYCE ARMSTRONGCHECKED: | |
| 20141106CHECKED: | |
| JOYCE ARMSTRONGENGINEER: | |
| 20141106ENGINEER: | |
| REV E_2: | |
| FILE NO SRELGEN1A3414_3: | |
| REF_3: | |
| SHEET 21: | |
| 1: | |
| B518779: | |
| 1_2: | |
| B518780: | |
| 1Row1: | |
| 1Row2: | |
| 1Row3: | |
| 1_3: | |
| B519394: | |
| B518775: | |
| B516434: | |
| B518778: | |
| OUTER DAMPING FOIL: | |
| 1_4: | |
| 1_5: | |
| K0378: | |
| B518777: | |
| MIDDLE DAMPING FOIL: | |
| INNER DAMPING FOIL: | |
| 1Row1_2: | |
| 1Row1_3: | |
| K0378Row1: | |
| B518776Row1: | |
| INNER DAMPING FOILRow1: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34141Row4: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34141Row4_2: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34141Row4_3: | |
| 1X: | |
| K0378X: | |
| 1A34142: | |
| MK107 LPC1 STATOR VANEMODIFICATION DAMPING FOIL AND LPB PROCESS: | |
| XRow1: | |
| K0378X_2: | |
| 1A34141: | |
| LPC1 STATOR VANE MODIFICATION DAMPING FOIL AND LPB PROCESS: | |
| CAGE: | |
| DESCRIPTION: | |
| STOCK: | |
| MATERIAL: | |
| 20070207_2: | |
| 20070503_3: | |
| 20070503_4: | |
| REV E_3: | |
| FILE NO SRELGEN1A3414_4: | |
| REF_4: | |
| SHEET 3: | |
| 1_6: | |
| B518779_2: | |
| 1_7: | |
| B518780_2: | |
| 1_8: | |
| 1Row1_4: | |
| B519394_2: | |
| 1Row2_2: | |
| B518775_2: | |
| 1Row3_2: | |
| B516434_2: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34143: | |
| 1Row4: | |
| 1Row5: | |
| 1Row1_5: | |
| 96916Row1: | |
| 1A34141Row1: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34143Row1: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34143Row1_2: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34143Row1_3: | |
| VANE COMPRESSOR REWORKED TO 96916 1A34143Row1_4: | |
| 1X_2: | |
| 96916X: | |
| 1A34144: | |
| MK107 LPC1 STATOR VANEMODIFICATION LPB PROCESS: | |
| XRow1_2: | |
| 96916X_2: | |
| 1A34143: | |
| LPC1 STATOR VANE MODIFICATION LPB PROCESS: | |
| CAGE_2: | |
| DESCRIPTION_2: | |
| STOCK_2: | |
| MATERIAL_2: | |
| JOYCE ARMSTRONGCHECKED: | |
| 20141106CHECKED_2: | |
| JOYCE ARMSTRONGENGINEER: | |
| 20141106ENGINEER_2: | |
| REV E_4: | |
| FILE NO SRELGEN1A3414_5: | |
| REF_5: | |
| SHEET 31: | |
| 20070207_3: | |
| 20070503_5: | |
| 20070503_6: | |
| REV E_5: | |
| FILE NO SRELGEN1A3414_6: | |
| REF_6: | |
| SHEET 4: | |
| 20070725: | |
| FRANK PAKE_2: | |
| 20070802: | |
| 20070802_2: | |
| REV E_6: | |
| FILE NO SRELGEN1A3414_7: | |
| REF_7: | |
| SHEET 5: | |
| undefined: | |
| undefined_2: | |
| FRANK PAKE_3: | |
| REV E_7: | |
| FILE NO SRELGEN1A3414_8: | |
| REF_8: | |
| SHEET 6: | |
| JOYCE ARMSTRONGCHECKED_2: | |
| 20141106CHECKED_3: | |
| JOYCE ARMSTRONGENGINEER_2: | |
| 20141106ENGINEER_3: | |
| REV E_8: | |
| FILE NO SRELGEN1A3414_9: | |
| REF_9: | |
| SHEET 61: | |
| 20070725_2: | |
| FRANK PAKE_4: | |
| 20070802_3: | |
| 20070802_4: | |
| REV E_9: | |
| FILE NO SRELGEN1A3414_10: | |
| REF_10: | |
| SHEET 7: | |
| 20070725_3: | |
| FRANK PAKE_5: | |
| 20070802_5: | |
| 20070802_6: | |
| REV E_10: | |
| FILE NO SRELGEN1A3414_11: | |
| REF_11: | |
| SHEET 8: | |
| FRANK PAKE_6: | |
| REV E_11: | |
| FILE NO SRELGEN1A3414_12: | |
| REF_12: | |
| SHEET 9: | |
| JOYCE ARMSTRONGCHECKED_3: | |
| 20141106CHECKED_4: | |
| JOYCE ARMSTRONGENGINEER_3: | |
| 20141106ENGINEER_4: | |
| REV E_12: | |
| FILE NO SRELGEN1A3414_13: | |
| REF_13: | |
| SHEET 10: | |
| Approved: | |
| Checked: | |
| 2015-02-18T13:57:53-0500 | |
| HEALEY.SEAN.M.1010651057 |
| 2015-02-17T07:24:21-0500 | |
| ARMSTRONG.JOYCE.R.1229811033 |
File details come from the government source that posted it. Updated .