M6700123Q0024 Beaufort Hanger Furniture.pdf

SEE ADDENDUM

(No Collect Calls)

M6700123Q0024 02-Aug-2023

b. TELEPHONE NUMBER

910-451-7848

8. OFFER DUE DATE/LOCAL TIME

11:00 PM 05 Sep 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M670019. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PATRICIA QUINONES

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M501693366709

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

CONTRACTING DEPARTMENT

MCIEAST

308 HOLCOMB BOULEVARD

CAMP LEJEUNE NC 28547-8368

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M50169 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

M50169 MCAS BEAUFORT

MCAS BEAUFORT STATION SUPPLY BLDG 612 BAY 13

BEAUFORT SC 29902

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

337127

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF86

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

ADDENDA 52.212.-1

SUBMISSION OF QUOTES.

Addenddum to paragraph (b):

Quotes shall be submitted electronically via e-mail to patricia.quinones@usmc.mil.

RFQ Number M6700123Q0024 must be clearly shown in the subject line.

The offeror shall submit with their offer:

Technical Capability:

Descriptive literature outlining the specifications of the items and Salient Characteristics quoted to include drawings, the manufacturer’s name, model number, and manufacturer’s complete part numbers of all items offered.

Delivery Information:

Delivery with Installation Services. Clearly state if the offeror can meet the required delivery date (RDD) as stated in each line item. If not then provide an alternate delivery date for each line item.

Price:

The price offered must reflect unit prices, extended amounts per line item, and overall total.

(Note: All prices must be actual “face-value” pricing having already accounted for any discounts offered and extended to the Government).

Completed Representations and Certifications. The following representations and certifications must be completed and returned or be in Sam.Gov profile.

1. FAR 52.212-3 (Note that vendor is only required to complete paragraph (b) if they have not completed annual representations and certifications via the System for Award Management (SAM) website.)

2. FAR Provision 52.204-24 (Representation Regarding Certain Telecommunications and Video

Surveillance Services or Equipment)

3. FAR Provision 52.204-26 (Covered Telecommunications Equipment or Services- Representation)

4. DFARS Provision 252.204-7016 [Covered Defense Telecommunications Equipment or

Services—Representation (Dec 2019)]

5. DFARS Provision 252.204-7017 [Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services—Representation (Dec 2019)]

Past Performance:

Past Performance will be done using the Supplier Performance Risk System (SPRS). The Government reserves the right to use other sources as part of past performance.

(End of Addenda to Provision)

PERFORMANCE WORK STATEMENT

FURNITURE PACKAGE FOR HANGAR

BUILDING 729

AT MCAS BEAUFORT, SC

1.0 BACKGROUND. This is an acquisition for Furniture for Hangar 729 Admin to include the delivery of new furniture. Items shall be delivered and installed at the designated building aboard

Marine Corps Air Station (MCAS) Beaufort, South Carolina.

2.0 REQUIREMENT. The contractor shall provide all personnel, supervision, supplies, materials, equipment, tools, and transportation necessary to provide furniture including assembly and installation, in accordance with the performance work statement (PWS).

3.0 LOCATION. Building 729, Parks Av. and G. St., MCAS Beaufort, South

Carolina. The building has two floors, single door access at each end and two stairwells for access to the second floor. There are NO elevators/lifts.

If building is to be OCCUPIED prior to/or during the installation of the items, a Base Property representative will provide notice to Contracting Office and the Contractor shall conduct the installation in such a manner to prevent displacement of occupants. The Contractor will be required to deliver and install the items as well as remove and dispose of all packaging and installation debris.

4.0 TASKS

4.1 PRE-INSTALLATION. The contractor shall arrange pre-installation meeting(s) with

Base Property and Public Works (Government) representative within ten (10) business days of contractor award. Purpose of this meeting is to coordinate conduct of delivery/installation schedules. Points of Contact are:

Base Property: Mrs. Brenda

Shelton

Phone: (843) 228-6081

Email:brenda.shelton@usm c.mil

Public Works Representative: Mr. John Ramsey

Phone: (843) 228-7906

Email: john.ramsey@usmc.mil

Operating Hours: Normal operating hours are 7:00 AM EST – 3:30 PM EST, Monday through Friday. Closed on weekends and Federal Holidays.

4.2 DELIVERY. Delivery shall be coordinated with the Base Property representative. A delivery notification shall be provided at a minimum of one week prior to delivery/installation. The projected date for delivery is estimated for the week of October 30, 2023 and may be adjusted for new delivery date. The contractor shall provide a Project Manager to be on site throughout the entire project. The Project Manager shall have authority to represent the company to coordinate all services and issues through the Contracting and Base

Property Offices. All work will be conducted during the normal operation hours.

Deliver all Furniture directly to the required building at the time of installation. If required, forklift(s), temporary on-site storage containers, trailers, and/or vehicles may be set up in the vicinity of the buildings, with locations as directed by the Government Representative. Cost of forklift and above storage means to include properly locking is the full responsibility of the contractor. No Government owned forklifts, warehousing, or storage facilities will be provided.

4.3 INSTALLATION. Installation of Furniture Items shall be coordinated with Base Property (Government) representative and in accordance with floor plans (provided at Pre-installation meeting if not received by contract award):

Hallway, door frames, flooring, and individual rooms shall be protected with some form of padding. Items need to be installed and set-up as functionally designed.

Notify the Base Property (Government) representative if any items are found inoperable/damaged; items that need replacement will be at no additional expense to the Government.

Deviations or modifications from the Equipment List will be conducted via bilateral modification by the

Contracting Officer only. Proper approvals from the Base Property and Military Housing will be obtained for any deviations or modifications.

mailto:brenda.shelton@usmc.mil mailto:brenda.shelton@usmc.mil

4.4 JOB SITE. The contractor shall be responsible for cleaning the installation area and disposing of all trash and materials to the satisfaction of the Government’s representative or designated inspectors before completion of each workday and upon completion of the project. At the end of the project, the contractor shall restore any disturbed or damaged areas at the direction of the Contracting Officer.

4.5 REMOVAL. Contractor is responsible for removal of all packing materials and debris from delivery and installation to include drill dust and foot traffic (e.g., dirt, sand, mud, grass, water). The contractor will be required to clean-up/remove from items all plastics, tape, cardboard packaging, zip ties, Styrofoam, etc. and properly dispose of materials and debris.

4.6 DISPOSAL. Once a day (maximum), debris may be taken to the Materials Recycling Facility/ Landfill located on Itami Ave. Materials must be sorted as cardboard, plastic and wood. Driver must have a copy of the contract and placard provided by Base Property representative to enter the site.

4.7 WARRANTY. The contractor shall warrant all equipment and labor for a period of not less than one year.

The contractor shall provide all warranty information and documents at the time of delivery to include information and documentation for any manufacturer’s warranty.

5.0 FACILITY DAMAGE. Contractor shall be responsible for all damages to building and/or surrounding areas

(including lawns) when moving or installing furniture. Damages shall be repaired by contractor at contractor’s expense before final invoicing.

6.0 PARKING/EQUIPMENT. Parking of equipment and vehicles will be in designated areas or in authorized parking lots (normally not on the grass or lawn). The Government assumes no responsibility for vehicles or containers.

Contractor shall provide all necessary material handling equipment and tools required to support this requirement to include non-marking, rubber-wheeled hand trucks, dollies, and carts. Contractor shall be responsible for securing all material handling equipment. The Government will not be liable for any stolen or damaged property that is left unsecured by the contractor.

7.0 RESPONSIBILITY. The Government will not be responsible in any way for the Contractor's personal supplies, equipment, materials, or belongings brought onto the grounds to perform services. This includes but is not limited to loss or damage caused by fire, theft, hurricane, accident or other disaster.

8.0 CONTRACTOR UNAUTHORIZED WORK PERFORMANCE. The Contractor shall not perform work that deviates from contract requirements and specifications. If the Contractor deviates from contract requirements and specifications without approval of the CONTRACTING OFFICER, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

TRANSITION AND KICKOFF MEETING. The Contractor shall attend a phone conference transition

Meeting to discuss the award contract specification, deliverable, and installation time line for

Each room.

The technical point of contact and the award winning vendor shall attend this meeting within two weeks

After the contract is awarded.

9.0 BASE ACCESS INSTRUCTIONS FOR MARINE CORPS AIR STATION BEAUFORT

-Contractors and/or Delivery drivers must have in their possession: their contract number, delivery address, and sponsor’s contact information to gain initial access to the base. For supply and installation the technical point of contact is the sponsor, for supply deliveries the customer/delivery point of contact is the sponsor.

Contract Number: M67001XXXXXXX

Sponsor/Technical POC: John Ramsey

Phone Number: 843-228-7906

Delivery Address: Station Supply

(Attn. Jessica Hoffman M20361)

Bldg. 612, Bay 14 Itami Ave.

MCAS Beaufort, SC, 29904

M6700123Q0024

- Contractors must be registered in the Defense Biometrics Identification System (DBIDS). It is the Contractor’s responsibility to ensure all their employees and or subcontractors are properly registered within DBIDS.

- DBIDS credentials will be valid for the duration of your contract, not to exceed one year;

however, re-vetting of individuals' information will occur each year.

- Contractors requiring access for over 60 days will receive a credential valid for up to one year.

- Contractors requiring access for less than 60 days will receive a temporary paper pass.

- Contractor Common Access Card (CAC) Eligibility: Contractor personnel authorized CAC's are exempt from DBIDS enrollment.

- If you have questions regarding base access, Contractor CAC or DBIDS requirements contact the

Contractor Vetting Office at 910-451-0283/0284/0285.

**The Government will not be responsible for any contractor access delays. Delays that may result from inadequate planning are strictly the responsibility of the contractor.

10. Performance Requirements Summary (PRS)

Quality Assurance Surveillance Plan (QSAP)/Performance Requirement Summary (PRS). The QASP has been developed to provide the standard of surveillance for monitoring the contract delivery and installation.

The performance standards for this Performance Work Statement (PWS) are 98% Acceptable Quality Levels

(AQLs) on completed work inspected by the Government. The furniture shall be delivered and installed with no damage. The contractor shall provide rework and corrective actions for all unacceptable completed work not meeting the 98% AQLs.

Objective Standard

Location

Acceptable

Quality Level

(AQL)

Standard

Inspector Inspection Type and Frequency

Incentive

Delivery In accordance with PWS

-95%

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

228-7906 x Observation

Random

Monitoring

Invoice payment

Installation In accordance with PWS

-95%

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

Observation x Random

Quality and

Damage

In accordance with PWS

-Timeliness

-Quality

-Accuracy

John

Ramsey

Station

Architect

(843)

Observation x Random

See Salient Characteristics in details as attached below.

SALIENT CHRACTERISTICS

The contractor must provide all hardware and components required to assemble furniture, fixtures, and equipment.

CLIN-0001

30"W x24"D x 66"H Pre-finished Metal Slate Shelving Units

Heavy Duty Commercial with 5 Adjustable Shelves.

CLIN-0002

5' Dry Erase Whiteboard with Natural Aluminum Frames, Eraser Trays & Top Cork Tack Rail N/A 14

CLIN-0003

6' Dry Erase Whiteboard with Natural Aluminum Frames, Eraser Trays & Top Cork Tack Rail N/A 6

CLIN-0004

8' Dry Erase Whiteboard with Natural Aluminum Frames, Eraser Trays & Top Cork Tack Rail N/A 4

CLIN-0005 (Room A102)

Stool,High-Hgt,Tlt Lim/Ang, Fully Adj Arms,Non-Uphst

Qty 6

30"D x 60"W x 41"H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 6

CLIN-0006 (Room A103)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"d x 72"W x 1 1/2"T with a Grommet Hole, Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels.

Qty 1

CLIN-0007 (Room A105)

Pre-finished Metal Pilot Equipment/Gear Lockers 30"W x 24"D x

78"H, Heavy Duty, Commercial.

Qty 15

CLIN-0008 (Room A106)

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads.

Qty 8

30"D x 60"W x 41"H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 8

CLIN-0009 (Room A106A)

Seat Angle, Fully Adj Arms, Non-Uphst Armpads.

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

24"d x 66"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels

Qty 2

CLIN-0010 (Room A106B)

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 7

30"D x 60"W x 41"H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 7

CLIN-0011 (Room A107)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels

Qty 2

CLIN-0012 (Room A108)

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads Color

Qty 6

30"D x 60"W x 41"H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 6

CLIN-0013 (Room A115)

MultiGeneration stacking chair, fixed arms, soft casters

Qty 4

Rectangular 4-Leg Table, 24"D x 48W x 28.75"H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108" Cordset

Qty 4

CLIN-0014 (Room A116)

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 1

30"D x 60"W x 41"H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 1

CLIN-0015 (Room A117)

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x

28 3/8"H End Panels

Qty 1

CLIN-0016 (Room A118)

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x

28 3/8"H End Panels

Qty 2

CLIN-0017 (Room A119)

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder

Adjusts to Counter Height, with No Lumbar, Hard

Casters, Knockdown

Qty 2

CLIN-0018 (Room A120)

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 6

30"D x 60"W x 41"H, Pre-finished Heavy Duty

Commercial Metal Worktable with Butcherblock Worktop, Task Lighting, Electrical Outlets

CLIN-0019 (Room A121)

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-24"d x 66"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x

28 3/8"H End Panels

Qty 2

CLIN-0020 (Room A201)

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 4

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-30"d x 72"W x 1 1/2"T with a Grommet Hole, a Pedestal with

Pencil and File Drawer, a 72"W x 28 3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28 3/8"H End Panels

Qty 4

CLIN-0021 (Room A202)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels

Qty 1

CLIN-0022 (Room A203)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels

Qty 1

CLIN-0023 (Room A204)

MultiGeneration stacking chair, fixed arms, soft

Casters

Qty 4

Side Chair, Hard Casters

Qty 4

Rectangular 4-Leg Table, 24"D x 48W x 28.75"H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108" Chordset

Qty 4

CLIN-0024 (Room A205)

MultiGeneration stacking chair, fixed arms, soft

Casters

Qty 4

Side Chair, Hard Casters

Qty 4

Rectangular 4-Leg Table, 24"D x 48W x 28.75"H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108" Chordset

Qty 4

CLIN-0025 (Room A206)

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15"D x 36"W x 72-

1/2"H, Stepped Base, for 28-3/8" planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20" D x 24"W x 72"H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15"D x 30"W x 20"H and 1- 15"D x

48"W x 20"H for 28-3/8" planning.

Qty 1

Classic Desktop 36"D x 72"W x 1-1/2"H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24"D x 54"W x 1 1/2"T, L2-24"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Back Panel, 2-24"W x 28 3/8"H L

Qty 1

Tackboard, Wall Hung Tackboard

30"W x 23-1/8"H x 1"T

Qty 1

Tackboard, Wall Hung Tackboard

48"W x 23-1/8"H x 1"T

Qty 1

CLIN-0026 (Room A207)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15"D x 36"W x 72-

1/2"H, Stepped Base, for 28-3/8" planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20" D x 24"W x 72"H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15"D x 30"W x 20"H and 1- 15"D x

48"W x 20"H for 28-3/8" planning

Qty 1

Classic Desktop 36"D x 72"W x 1-1/2"H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24"D x 54"W x 1 1/2"T, L2-24"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Back Panel, 2-24"W x 28 3/8"H L Base

Tackboard, Wall Hung Tackboard

30"W x 23-1/8"H x 1"T

Qty 1

Tackboard, Wall Hung Tackboard

48"W x 23-1/8"H x 1"T

Qty 1

CLIN-0027 (Room A208)

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 10

Rectangular Table (No Suggestions) X 120"W with 2-

Y-Legs and 1-T-Leg

Qty 1

CLIN-0028 (Room A209)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 6

Outline Studio Chair, 15-3/4" Seat Height

Qty 2

Soft Side Table with Round Top, 15.7"H x 16.1"W, Linoleum Top

Qty 1

Bookcase, Open with 4 Shelves, 15"D x 36"W x 72-

1/2"H, Stepped Base, for 28-3/8" planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20" D x 24"W x 72"H, Desk Height, Right

Hand

Qty 1

Round Table, 42"D x 28-3/8"H x 1"T, with Column

Base, Fixed Height, Laminate Top

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15"D x 30"W x 20"H and 1- 15"D x

48"W x 20"H for 28-3/8" planning

Classic Desktop 36"D x 72"W x 1-1/2"H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-30"D x 66"W x 1 1/2"T, L2-24"d x 78"W x 1 1/2"T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78"W x 28

3/8"H Back Panel, 2 23"W x 28 3/8"H End Panels, 1-

30"W x 28 3/8"H L Base

Qty 1

Tackboard, Wall Hung Tackboard

30"W x 23-1/8"H x 1"T

Tackboard, Wall Hung Tackboard

72"W x 23-1/8"H x 1"T

CLIN-0029 (Room A215)

MultiGeneration stacking chair, fixed arms, soft casters

Qty 6

Rectangular 4-Leg Table, 24"D x 48W x 28.75"H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108" Chordset

Qty 6

CLIN-0030 (Room A216)

Petal End Table, white petals, Richard Schultz Petal

Collection

Qty 1

Petite Club Chair with Swivel Base, 26"W

Qty 1

CLIN-0031 (Room A217 and A218)

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 9

Side Chair, with arms, sled base, upholstered seat

Qty 4

36"Wx39"H, Lateral File, 1-13.5" receding door with fixed shelf, 1-12" drawer with rails, 1-10.5" drawer with rails, locks, and Worksurface Top, Dividends style

Qty 1

42"Wx39"H, Lateral File, 1-13.5" receding door with fixed shelf, 1-12" drawer with rails, 1-10.5" drawer with rails, locks, and Worksurface Top, Dividends style

Qty 2

L Shaped Worksurface L1-24"D x 60"W x 1 1/2"T, L2-24"d x 60"W x 1 1/2"T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78"W x 28

3/8"H Back Panel, 2 23"W x 28 3/8"H End Panels, 1-

30"W x 28 3/8"H L Base

Qty 16

24"W x 50"H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2

Qty 8

30"W x 50"H Preconfigured Panel, Topway, Monolithic/Monolithic, Frosted Glass/Fabric to

Raceway Side 1 & 2

Qty 8

60"W x 50"H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-Quad Power Outlets, and Power Connectors to

Power Above Ceiling

Qty 16

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"d x 72"W x 1 1/2"T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72"W x 28

3/8"H Modesty Panel, 2- 28 3/8" H Legs, 2-29"W x 28

3/8"H End Panels

CLIN-0032 (Room A220)

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads

Qty 8

42"W x 27"H, Lateral File, drawer with rails, and locks

Qty 2

42"W x 39"H, Lateral File, 1-13.5" receding door with fixed shelf, 1-12" drawer with rails, 1-10.5" drawer with rails, and locks

Qty 1

42"W x 18"D Calibri Front Lateral File Worksurface Top, Dividends style Knoll Calibri or Equal

Qty 3

L Shaped Worksurface L1-24"D x 60"W x 1 1/2"T, L2-

24"D x 60"W x 1 1/2"T with a Grommet Hole, 2-Pedestal with Pencil and File Drawer, a 78"W x 28 3/8"H Back

Panel, 2 23"W x 28 3/8"H End Panels, 1-30"W x 28 3/8"H

Qty 16

24"W x 50"H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

30"W x 50"H Preconfigured Gallery Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

60"W x 50"H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-

Quad Power Outlets, and Power Connectors to Power

Above Ceiling.

Qty 16

CLIN-0033 (Room A221)

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"D x 66"W x 1 1/2"T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72"W x 28 3/8"H Modesty

Panel, 2- 28 3/8" H Legs, 2-29"W x 28 3/8"H End Panels.

CLIN-0034 (Room A222)

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

Side Chair, with arms, sled base, upholstered seat

Qty 2

L Shaped Worksurface L1-24"D x 48"W x 1 1/2"T, L2-

30"D x 66"W x 1 1/2"T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72"W x 28 3/8"H Modesty

Panel, 2- 28 3/8" H Legs, 2-29"W x 28 3/8"H End Panels.

CLIN-0035 (Room A224)

Outline Studio Chair, 15-3/4" Seat Height.

Outline Studio 3 Seat Sofa 15-3/4" Seat Height.

Qty 1

Soft Side Table with Round Top, 15.7"H x 16.1"W, Linoleum Top

Qty 1

Work Chair, Flex Back Net Task Chair, Height Adjustable

Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown.

Qty 4

Rectangle with one rounded end 4-Leg Table, 42"D x

72W x 28.75"H, Worktable, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual

USB Outlet), and 108" Chord set.

CLIN-0037

Freight

Qty 1

CLIN-0038

Installation Services

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 15 Each Pre- Finished Metal Slate

FFP

CLIN002- 30 inches W x24 inches D x 66 inches H Pre-finished Metal Slate

GrayShelving Units Heavy Duty Commercial

FOB: Destination

PURCHASE REQUEST NUMBER: M501693366709

PSC CD: 7195

NET AMT

0002 14 Each Dry Erase Whiteboard

FFP

5 Foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

0003 6 Each 6 Foot Dry Erase Whiteboard

FFP

6 foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

0004 4 Each 8 foot Dry Erase Whiteboard

FFP

8 Foot Dry Erase Whiteboard with Natural Aluminum Frames,Eraser Trays and

Top Cork Tack Rail

FOB: Destination

0005 1 Kit Room A102 Stool, High-Hgt, Tlt

FFP

Stool,High-Hgt,Tlt Lim/Ang, Fully Adj Arms,Non-Uphst

Qty 6

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 6

NOTE: Provide all hardware and components required to assemble furniture, fixtures, and equipment.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0006 1 Kit Room A103 ITEM BRAND Work Chai

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

3/8 inches H End Panels.

FOB: Destination

0007 1 Kit Room A105

FFP

Pre-finished Metal Pilot Equipment/Gear Lockers 30 inches W x 24 inches D x

78 inches H, Heavy Duty, Commercial.

Qty 15 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0008 1 Kit Room A106

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads.

Qty 8

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Commercial

Qty 8

0009 1 Kit Room A106A

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads.

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

24 inches d x 66 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

3/8 inches H End Panels unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0010 1 Kit Room A106B

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 7

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

Qty 7

0011 1 Kit Room A107

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 2

Side Chair, Hard Casters.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0012 1 Kit Room A108

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads Color

Qty 6

30 inches D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

0013 1 Kit Room A115

FFP

MultiGeneration stacking chair, fixed arms, soft casters

Qty 4

Rectangular 4-Leg Table, 24 inches x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Cordset

0014 1 Kit Room A116

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 1

30"D x 60 inches W x 41 inches H, Pre-finished Metal Worktable with

Electrical Outlets and Butcherblock Worktop Heavy Duty

0015 1 Kit Room A117

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 1

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 4 inches W x 1 1/2 inches T, L2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

28 3/8 inches H End Panels

0016 1 Kit Room A118

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L 1-24 inches D x 48 inches W x 1 1/2 inches T, L 2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

0017 1 Kit Room A119

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder

Adjusts to Counter Height, with No Lumbar, Hard

Casters, Knockdown

0018 1 Kit Room A120

FFP

Stool,High-Hgt,Tlt Lim/Ang,Fully Adj Arms,Non-Uphst

Armpads

Qty 6

30"D x 60 inches W x 41 inches H, Pre-finished Heavy Duty

Commercial Metal Worktable with Butcherblock Worktop, Task Lighting, Electrical Outlets

0019 1 Kit Room A121

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 2

Side Chair, Hard Casters

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-24 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 66 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x

0020 1 Kit Room A201

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 4

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-30 inches D x 72 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with

Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels

0021 1 Kit Room A202

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inchesT, L2-30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0022 1 Kit Room A203 Work Chair, B Size, FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 1

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inchesW x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0023 1 Kit Room A204

FFP

MultiGeneration stacking chair, fixed arms, soft

Casters

Side Chair, Hard Casters

Rectangular 4-Leg Table, 24 inches D x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Chordset unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0024 1 Kit Room A205

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning.

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L

Qty 1

Tackboard, Wall Hung Tackboard

30"W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard

48 inches W x 23-1/8 inches H x 1 inches T unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0025 1 Kit Room A206

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning.

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0026 1 Kit Room A207

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 2

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning

Qty 1

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-24 inches D x 54 inches W x 1 1/2 inches T, L2-24 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Back Panel, 2-24 inches W x 28 3/8 inches H L Base

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0027 1 Kit Room A208

FFP

Work Chair,Flex Back Net Task Chair, Height

Adjustable Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown

Qty 10

Rectangular Table (No Suggestions) X 120 inches W with 2-

Y-Legs and 1-T-Leg unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0028 1 Kit Room A209

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 1

Side Chair, Hard Casters

Qty 6

Outline Studio Chair, 15-3/4 inches Seat Height

Qty 2

Soft Side Table with Round Top, 15.7 inches H x 16.1 inches W, Linoleum Top

Qty 1

Bookcase, Open with 4 Shelves, 15 inches D x 36 inches W x 72-

1/2 inches H, Stepped Base, for 28-3/8 inches planning

Qty 1

Wardrobe Cabinet with Lock, Coat Rod, and Hat

Rack, 20 inches D x 24 inches W x 72 inches H, Desk Height, Right

Hand

Qty 1

Round Table, 42 inches D x 28-3/8 Inches H x 1 inches T, with Column

Base, Fixed Height, Laminate Top

Qty 1

Overhead Cabinet, Wall Hung, Hinged Doors, Cubby

Concealed, 1-15 inches D x 30 inches W x 20 inches H and 1- 15 inches D x

48 inches W x 20 inches H for 28-3/8 inches planning

Classic Desktop 36 inches D x 72 inches W x 1-1/2 inches H with

Adjustable Height Base, Flush Modesty Panel, and

Square Edges

Qty 1

L Shaped Worksurface L1-30 inches D x 66 inches W x 1 1/2 inches T, L2-24 inches d x 78 inches W x 1 1/2 inches T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78 inches W x 28

3/8 inches H Back Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-

30 inches W x 28 3/8 inches H L Base

Qty 1

Tackboard, Wall Hung Tackboard

30 inches W x 23-1/8 inches H x 1 inches T

Qty 1

Tackboard, Wall Hung Tackboard

72 inches W x 23-1/8 inches H x 1 inches T

0029 1 Kit Room A215

FFP

MultiGeneration stacking chair, fixed arms, soft casters

Qty 6

Rectangular 4-Leg Table, 24 inches D x 48 inches W x 28.75 inches H, Work Table, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual USB Outlet), and 108 inches Chordset unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0030 1 Kit Room A216

FFP

CLIN-0030 (Room A216)

Petal End Table, white petals, Richard Schultz Petal

Collection

Qty 1

Petite Club Chair with Swivel Base, 26 inches W unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0031 1 Kit Room A217 and A 218

FFP

Work Chair,B Size,Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads

Qty 9

Side Chair, with arms, sled base, upholstered seat

Qty 4

36 inches Wx39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, locks, and Worksurface Top, Dividends style

Qty 1

42 inches Wx39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, locks, and Worksurface Top, Dividends style

Qty 2

L Shaped Worksurface L1-24 inches D x 60 inches W x 1 1/2 inches T, L2-24 inches d x 60 inches W x 1 1/2 inches T with a Grommet Hole, 2-

Pedestal with Pencil and File Drawer, a 78 inches W x 28

3/8 inches H Back Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-

30 inches W x 28 3/8 inches H L Base

Qty 16

24 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2

Qty 8

30 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Frosted Glass/Fabric to

Raceway Side 1 & 2

Qty 8

60 inches W x 50 inches H Preconfigured Panel, Topway, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-Quad Power Outlets, and Power Connectors to

Power Above Ceiling

Qty 16

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches d x 72 inches W x 1 1/2 inches T with a Grommet Hole, a

Pedestal with Pencil and File Drawer, a 72 inches W x 28

3/8 inches H Modesty Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28

0032 1 Kit Room A220

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads

Qty 8

42 inches W x 27 inches H, Lateral File, drawer with rails, and locks

Qty 2

42 inches W x 39 inches H, Lateral File, 1-13.5 inches receding door with fixed shelf, 1-12 inches drawer with rails, 1-10.5 inches drawer with rails, and locks

Qty 1

42 inches W x 18 inches D Calibri Front Lateral File Worksurface Top, Dividends style Knoll Calibri or Equal

Qty 3

L Shaped Worksurface L1-24 inches D x 60 inches W x 1 1/2 inches T, L2-

24 inches D x 60 inches W x 1 1/2 inches T with a Grommet Hole, 2-Pedestal with Pencil and File Drawer, a 78 inches W x 28 3/8 inches H Back

Panel, 2 23 inches W x 28 3/8 inches H End Panels, 1-30 inches W x 28 3/8 inches

H

Qty 16

24 inches W x 50 inches H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

30 inches W x 50 inches H Preconfigured Gallery Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2.

Qty 8

60 inches W x 50 inches H Preconfigured Panel, Top way, Monolithic/Monolithic, Fabric to Raceway Side 1 & 2, 2-

Quad Power Outlets, and Power Connectors to Power

Above Ceiling.

Qty 16 unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0033 1 Kit Room A221

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty

Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels.

unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0034 1 Kit Room A 222

FFP

Work Chair, B Size, Std-Hgt Range Adj, Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Arm pads.

Qty 2

Side Chair, with arms, sled base, upholstered seat

Qty 2

L Shaped Worksurface L1-24 inches D x 48 inches W x 1 1/2 inches T, L2-

30 inches D x 66 inches W x 1 1/2 inches T with a Grommet Hole, a Pedestal with Pencil and File Drawer, a 72 inches W x 28 3/8 inches H Modesty

Panel, 2- 28 3/8 inches H Legs, 2-29 inches W x 28 3/8 inches H End Panels.

0035 1 Kit Room A224

FFP

Outline Studio Chair, 15-3/4 inches Seat Height.

Qty 2

Outline Studio 3 Seat Sofa 15-3/4 inches Seat Height.

Qty 1

Soft Side Table with Round Top, 15.7 inches H x 16.1 inches W, Linoleum Top unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0036 1 Kit Room A225

FFP

Work Chair, Flex Back Net Task Chair, Height Adjustable

Arms, Plastic Base, Standard Cylinder, with Lumbar, Hard Casters, Knockdown.

Qty 4

Rectangle with one rounded end 4-Leg Table, 42 inches D x

72 inches W x 28.75 inches H, Worktable, Fixed Top, with Casters, Desk Shroud for a 3 Position (2 Power Outlets and 1 Dual

USB Outlet), and 108 inches Chord set.

0037 1 Each Freight

FFP

Freight

FOB: Destination

0038 1 Each Installation

FFP

Installation Services

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

0020 Destination Government Destination Government

0021 Destination Government Destination Government

0022 Destination Government Destination Government

0023 Destination Government Destination Government

0024 Destination Government Destination Government

0025 Destination Government Destination Government

0026 Destination Government Destination Government

0027 Destination Government Destination Government

0028 Destination Government Destination Government

0029 Destination Government Destination Government

0030 Destination Government Destination Government

0031 Destination Government Destination Government

0032 Destination Government Destination Government

0033 Destination Government Destination Government

0034 Destination Government Destination Government

0035 Destination Government Destination Government

0036 Destination Government Destination Government

0037 Destination Government Destination Government

0038 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 31-OCT-2023 15 M50169 MCAS BEAUFORT

MCAS BEAUFORT STATION SUPPLY

BLDG 612 BAY 13

BEAUFORT SC 29902

M50169

0002 31-OCT-2023 14 (SAME AS PREVIOUS LOCATION)

0003 31-OCT-2023 6 (SAME AS PREVIOUS LOCATION)

0004 31-OCT-2023 4 (SAME AS PREVIOUS LOCATION)

0005 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0006 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0007 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0008 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0009 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0010 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0011 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0012 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0013 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0014 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0015 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0016 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0017 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0018 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0019 31-OCT-2023 1 (SAME AS PREVIOUS LOCATION)

0020 31-OCT-2023 1 (SAME AS PREVIOUS…