Amndmt.pdf

N6592323SU00006

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide the Government’s response to questions asked. See Summary of Changes for details.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 19-Sep-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M6700122Q1204

X 9B. DATED (SEE ITEM 11)

14-Sep-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

19-Sep-2022

CODE

M67001 MARINE CORPS FIELD CONTRACTING SY

ATTN: JEFFREY G. PENNY

PSC BOX 8018

MARINE CORPS AIR STATION

CHERRY POINT NC 28533

M67001 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M6700122Q1204

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

Collection and Analysis of Portable Breating Air Panels

Solicitation M6700122Q1204

Questions Received and the Government’s Response

Q1: Will the contractor be responsible for repairing/servicing the units that do not pass the test under this contract?

A1: No the Contractor is not responsible for repairing/servicing the units that do not pass under this contract.

The following have been modified:

PERFORMANCE WORK STATEMENT

1.0 SCOPE: This performance work statement requires a Contractor to collect and analyze 84 air samples from designated portable breathing air panels each quarter, evaluate samples against grade D breathing air requirements and provide a report of the findings. The Contractor shall also collect and analyze 6 emergency samples as needed by the customer. The samples shall be collected from designated locations at the Fleet

Readiness Center East, Cherry Point, NC. The Contractor shall provide all labor, parts, materials, equipment, freight, and transportation required to collect, analyze, and provide the reports.

2.0 REQUIREMENTS:

2.0.1 Collection of Samples: The Contractor shall collect and analyze 1 air sample from each of the 21 designated portable breathing air panel locations each quarter for a total of 84 samples per year. The

Contractor shall also collect and analyze up to 6 emergency air samples per year on a as needed basis.

2.1 Samples shall be collected on a weekday between 7:00 AM and 3:30 PM. Quarterly sampling shall occur during the months of January, April, July, and October. Note that vehicle access is available within 100 feet of the breathing air panel collection location. Constant control of tools and materials is required at all times.

2.2 Location of breathing air panels: The Tools and Parts Attendant will collect the Portable breathing Air

Panels and they will be located in the Calibration/PM Tool and Support Equipment room in Building

137.

2.0.2 Analysis: The Contractor shall analyze the samples for conformance to Grade D air standards per Code of

Federal Regulations 29 CFR 1910.134(i) and Compressed Gas Association, Commodity Specification for

Air, G-7.1-2011. Condensed oil in each sample shall be measured in accordance with G-7.1 using weighed, dried, low micron rated glass-fiber filters. In addition, the water content of each sample shall be measured and listed in parts per million, dew point, and relative humidity.

2.0.3 Portable Breathing Air Panels to be Sampled:

Air Panel Number Planned Account Number Serial Number

BB50-CO 65923030668 37006

BB50-CO 65923030669 37009

BB50-CO 65923030670 37008

BB50-CO 65923030671 37004

BB50-CO 65923030673 37005

BB50-CO 65923030674 37003

BB50-CO 65923030675 37011

BB50-CO 65923030676 37012

BB50-CO 65923030679 37013

BB50-CO 65923030818 20534

BB50-CO 65923035314 38761

BB50-CO 65923X31049 39991

BB50-CO 65923X31050 39992

BB50-CO 65923X31052 39994

BB50-CO 65923X32049 17644

BB50-CO 65923X32038 22238

BB50-CO 65923X3076881 3339044

BB50-CO 65923030672 37014

BB50-CO 65923X31051 39993

BB50-CO 65923X3035336 38766

BB50-CO 65923X3076584 2159-101

3.0 Deliverable: The Contractor shall provide a typed report listing the results of the analysis, for each sample, on an individual 8 1/2" X 11" sheet of paper. The reported results for each sample shall contain the breathing air panel asset number identifying where the sample was taken. In addition, the reported results shall clearly indicate the tests performed, an acceptable range for the parameters tested based on Grade "D" air, and the actual amount measured in the sample. The last line of each report shall state, "This sample meets (or does not meet - depending on test results) the Compressed Gas Association Air Specification G-7.1 for Grade "D" breathing air per OSHA 29 CFR 1910.134." The Contractor shall provide the test results within 10 working days after collecting the samples.

3.0.1 Reports shall be delivered by Federal Express mail to:

Commanding Officer

Attn: Respiratory Protection Program Manager, Code 7.10.1

Fleet Readiness Center East

PSC Box 8021 A Street

Cherry Point, NC 28533

3.0.2 If test results indicate a sample does not meet Grade "D" air requirements, the Contractor shall contact the

FRC East, Cherry Point NC, Industrial Safety and Occupational Health Division Director, at, (252) 464-7015 immediately after obtaining the results.

3.0.3 The contractor shall check in upon arrive and check out prior to departure with the Equipment and

Facilities Services Specialist, Bldg. 84. The contractor shall furnish a signed malfunction/service report to the

Equipment and Facilities Services Specialist, Bldg. 84, 252-464-9366 upon completion of each maintenance call within 24 hours of departure. The report shall include, as a minimum, the following information:

Date and time notified

Date and time of arrival

Type, Model and Serial Number(s) of equipment

Location of machines

Description of malfunction(s) and/or condition

Identified cause of the malfunction (if applicable)

Date and time of departure

4.0 Scheduling: The Contractor shall notify the Tools and Parts Attendant, five working days prior to collecting samples, of the intent to come on site. At the same time, the Contractor shall provide the Government Badge and Decal Office, (252) 464-7397/9665, with all personnel information required to obtain a visitor’s pass allowing "NO ESCORT REQUIRED" badges to be issued when taking samples. A Government Safety and

Occupational Health or Union representative may be present when samples are collected.

5.0 Points of Contact:

Tools and Parts Attendant:

Primary: Tammi Wright, tammi.l.wright2.civ@us.navy.mil, (252) 464-9569

Alternate: Ryan Titus, ryan.c.titus@us.navy.mil, 252-464-9569

76100 MRO Logistics, Simplified Acquisition Procurement Support:

Primary: Heather Unruh, heather.unruh@navy.mil, 252-464-5535

Alternate: Maria Ratte, maria.c.ratte.civ@us.navy.mil, 252-464-6053

Technical:

Primary: Aquiles P. Faustino Jr., aquiles.p.faustino.civ@us.navy.mil, 252-464-9883

Alternate: Brian K. Whitten, brian.k.whitten.civ@us.navy.mil, 252-464-5148

(End of Summary of Changes)