M6700122Q1151 Solicitation.pdf

SEE ADDENDUM

( No Col lect Cal ls )

M6700122Q1151 23-Aug-2022

b. TELEPHONE NUMBER

910-451-1467

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 07 Sep 2022

5. SOLICITATION NUM BER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

( SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t . Use Only)

23.

CODE 10. TH IS ACQUISI TION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M670019. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAM E

OSCAR QUINTANA

2. CONTRACT NO. 3 . AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLI CI TATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52. 212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRI ATION DATA

1. REQUISITION NUMBER

20.

ADDI TIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M MLR042156058

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52. 212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDI NG ANY ADDITI ONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO I TEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THI S DOCUMENT AND RETURN

% FOR:SET ASI DE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

SGT QUINTANA

PO BOX 8368

CAMP LEJEUNE NC 28542

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M MLR04 16. ADMINISTERED BY

12. DI SCOUNT TERMS11. DELIVERY FOR FOB DESTI NA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLIC ITATION

RFQ IFB RFPX

M MLR04

DAVID PENSANTE

STATION SUPPLY, BUILDING AS- 130 MCAS NEW RIVE

JACKSONVILLE NC 28545

TEL: 910-449-6631 FAX:

FAX:

TEL: 910-451-1467

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

334310

X

OFFER DATED

29. AW ARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWI SE IDENTIFI ED ABOVE AND ON ANY

COPI ES TO ISSUI NG OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN- OWNED

SM ALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF66

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEI VED INSPECTED

32b. SIGNATURE OF AUTHORI ZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATI VE

32e. MAILI NG ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORI ZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FI NALPARTIALCOMPLETE

36. PAY MENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHI P NUMBER

PARTI AL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAY MENT

41b. SIGNATURE AND TITLE OF CERTIFYI NG OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC 'D (YY/ MM/DD) 42d. TOTAL CONTAI NERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6700122Q1151

Section SF 1449 - CONTINUATION SHEET

NOTICE TO OFFERORS

SUBMISSION OF QUOTES: Quotes may be submitted via email (no larger than 2MB) to oscar.quintana@usmc.mil; (PREFERRED METHOD) or via hand delivery/courier to Contracting Department, Bldg. 308, Holcomb Blvd, Camp Lejeune, NC 28542. It is solely the Offeror’s responsibility to ensure quotes are submitted in accordance with FAR provision 52.212-1 including its addenda, and received within the required timeframe. All quotes, if timely received, will be considered for award. The information submitted shall be clear and legible.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each

Disc and Media Player

FFP

"Brand Name or Equal to:"

Manufacturer: Denon Model: DN-500BDMKII Professional Disc Player Part Number: DED500BDMKII An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Digital media player (Blu-ray Disc, DVD, CD, SD, USB device [mass storage class]) AVCHD playback format •Blu-ray Disc: BD25, BD50, BD-ROM, BD-R, BD-RE, BD25, BD50, BD-ROM, BD-R, BD-RE

•DVD: DVD, DVD+R, DVD-R, DVD+RW, DVD-RW

•CD: CD, CD-R, CD-RW, DTS Music Disc (DTS Audio CD, 5.1 Music Disc), HDCD, Super Video CD (SVCD), Video CD (VCD) •Video: .3gp, .asf, .avi, .dat, .divx, .mkv, .mov, .mp4, .mpg, .m2ts, .ogm, .rmvb, .tp, .ts, .wmv •Subtitles: .ass, .smi, .srt, .ssa, .sub •Audio: .ape, .flac, .m4a (AAC), .mp3, .wav, .wma •Picture: .gif, .jpg (or .jpeg), .png

•FAT16, FAT32, NTFS

•SD card with 128GB total capacity •USB drive (mass storage class) with 2 TB total capacity •Resolutions: 1080i, 1080p minimum •Aspect Ratios: 16:9 Full, 16:9 Normal, 4:3 Pan & Scan, 4:3 Letterbox •System: NTSC, PAL, Multi (if supported by TV) •HDMI Color Space: 4 RGB PC Level, RGB Video Level, YCbCr (4:4:4), YCbCr 4:2:2 •Video: DivX 3, 4, 5, 6; DivX HD; MPEG-1; MPEG-2; MPEG-4; MPEG-4 AVC (H.264); VC-1 (Windows Media Video); Xvid •Audio: AAC; Dolby Digital; Dolby Digital Plus; Dolby TrueHD; DTS Digital Surround; DTS-HD; WMA •Output Level (balanced XLR): +4 dBu = +1.786 dBV •Output Level (unbalanced RCA): +6 dBV •Digital Output Output Level (coaxical): 75ohm •Signal Format: AES/EBU •Surround Audio: DTS-Master Audio, DTS-HD High Resolution Audio, DTS Digital Surround, Dolby TrueHD, Dolby Digital (AC-3), Dolby Digital Plus (7.1ch) •Frequency Response: 20 Hz – 20 kHz (+0.5 dB) •Signal-to-Noise Ratio: > 100 dB (A-weighted) •Total Harmonic Distortion: < 0.05% •Dynamic Range: > 100 dB (A-weighted) •Headroom: 6 dB •Channel Separation: > 90 dB

• (2) XLR audio outputs (L/R, balanced) •(2) RCA audio outputs (L/R, unbalanced) •(8) RCA audio outputs (7.1 surround sound) •Coaxial digital audio/visual output •HDMI audio/visual output •RJ-45 LAN port •(1) 9-pin D-Sub female RS-232C port •Remote Control: Infrared protocol, > 200 mV transmission output level •Serial Remote-Connector: 9-pin D-Sub female, RS-232C •Mode: Full duplex

•Baud Rate: 9600 or 38400 bps (selectable) •Connector: LAN port •Standards: Ethernet (10 Mbps), Fast Ethernet (100 Mbps) •Connection: IEC •Requirement: 115-120 VAC, 50/60 Hz •Rack mountable with included rack ears •1 Rack space maximum FOB: Destination

PURCHASE REQUEST NUMBER: MMLR042156058

PSC CD: 5830

NET AMT

0002 2 Each Smart TV

FFP

•Display size: 60in - 70in •Aspect Ratio: 16:9 •Resolution: 3840 x 2160 •HDR Compatibility: HDR10 •Video System: NTSC •Input Ports: 4 x HDMI Type A •1 x F-Type (RF Antenna) •Wi-Fi: Wi-Fi 5/802.11ac minimum •USB Ports: 2 x USB 2.0 (Audio, Photo, Video) •Ethernet LAN •Wall Mountable FOB: Destination

0003 2 Each Articulating TV Wall Mount

FFP

•Mounting studs have to support wood and Cinder block •Integrated cable management protects, contains an conceals cables for a clean, professional installation •I-shaped adaptor plate helps avoid blocking connections on back of display •Swivel, tilt, extend or retract the display •Extend up to 25 inches from wall •Tilt mechanism allows adjustment of +10°/-3° without the use of tools •60 degrees of side-to-side swivel minimum •Added 5 degrees of roll for post-installation display leveling •Optional roll lock keeps the display locked at 0° •Comes with included installation hardware and easy to follow instructions •Must be compatible with CLIN 0002 FOB: Destination

0004 1 Each Video Matrix Switch

FFP

"Brand Name or Equal to:"

Manufacturer: BZBGEAR Model: 8X8 HDMI 4K Video Matrix Switch Part Number: BZBGUHD42M An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•HDMI 2.0, DVI 1.0, and HDCP 2.2 compliant, EDID management support •Supports four HDMI inputs and two HDMI outputs •Video resolution 1080i minimum •Audio extraction from Optical S/PDIF and 3.5mm analog outputs •Supports 18 Gb/s minimum uncompressed bandwidth on all HDMI •Supports HDR10 minimum •Supports extract HDMI input source device audio of OUT A or OUT B to optical and analog L/R output •OUT A and OUT B support 4K to 1080P downscale function •Supports advanced EDID management including AUTO, COPY, and STD •Control via front-panel buttons and IR remote •Switching Type: IR Remote, Pushbutton •Color Processing: 8-Bit 4:4:4 YcbCr minimum •Video Input Connectors: 4 x HDMI (HDMI 2.0) Female •Input Video Format: HDMI (8-Bit 4:4:4 YCC) •1080p 60 fps minimum •Audio Input Connectors: 1 x 1/8" / 3.5 mm TRS Stereo Analog Female •Embedded Audio Input: HDMI: 2-Channel (per Input) •Video Output Connectors: 2 x HDMI (HDMI 2.0) Female •Output Video Format: HDMI (4:4:4) •WUXGA (1920 x 1200) 60 fps •UXGA (1600 x 1200) 60 fps •FWXGA (1366 x 768) 60 fps •XGA (1024 x 768) 60 fps •Audio Output Connectors: 1 x 1/8" / 3.5 mm TRS Stereo Analog Female •Embedded Audio Output: HDMI: 2-Channel (per Output) •Other I/O: 1 x USB Micro-B Firmware Input •HDCP Support: Version 2.2 minimum •HDR Compatibility: HDR10, Dolby Vision, •DTS Compatibility •Dolby Compatibility: Dolby Digital, Dolby Digital Plus •Power Consumption: 115-120 VAC •Compatible with CLIN 0001 and CLIN 0002 FOB: Destination

0005 1 Each Wireless Router

FFP

•Wi-Fi 5 (802.11ac) minimum •4 x External Antennas minimum •4 x Gigabit Ethernet LAN Ports minimum •1 x 5G Ethernet WAN Port •1 x USB •Minimum 2700 Square Foot Coverage •MU-MIMO Support: 4 x 4 •2.4 GHz: 600 Mb/s •5 GHz: 1200 Mb/s •6 GHz: 4800 Mb/s •Wireless Security: WPA2, WPA3 •RAM: 512 MB minimum •Storage Capacity: 512 MB minimum •Supported IEEE Standards: 802.11ac •AC Input Power 115-120 VAC, 50 / 60 Hz FOB: Destination

0006 4 Each Mounting Hardware

FFP

•6 x Hex Head Wood Screw (#14 x 2.5") minimum •6 x Phillips Screw (1/4 - 20 x 2.5") minimum •6 x Concrete Anchor minimum •6 x Toggler (1/4 - 20) minimum •6 x Flat Washer (1/4") minimum FOB: Destination

0007 3 Each Outlet Power Condi

FFP

"Brand Name or Equal to:"

Manufacturer: Furman Model: M-8Dx 9 Outlet Power Conditioner Part Number: FUM8DX An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Voltage Protection & Monitoring •15Amp Rating •6' Power Cord with NEMA 5-15P •Rack Mountable with Included Rack Ears •Type: Conditioner •Metering: Yes •Integrated Lamps: Yes •Outlets 8 x NEMA 5-15R (Rear Panel) •1 x NEMA 5-15R (Front Panel) •AC Input Power 120 VAC, 60 Hz •Protection & Conditioning •Overvoltage Protection 130 V •Maximum Spike Current: 12,000 A •Surge Energy Rating: 150 Joules •EMI/RFI Noise Filtration 26 dB (200 kHz to 10 MHz) •9 outlets minimum FOB: Destination

0008 2 Each High Speed HDMI Cable

FFP

•Supports HDR10 minimum •Connector 1: 1 x HDMI Male •Connector 2: 1 x HDMI Male •Cable Length: 100feet minimum •HDMI Version: 2.1 minimum •Ethernet Channel: Yes •Bandwidth: 48 Gbps minimum •Compliance: HDR minimum FOB: Destination

0009 1 Each Stereo Channel Digital Mixer

FFP

"Brand Name or Equal to:"

Manufacturer: Behringer Model: Wing 48 Ch. Digital Mixer Part Number: WING An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•48 channel/ 24 Bus/ 24 Fader •Frequency response at 48 kHz sample rate, 0 to -1 dB (any gain setting) 10 Hz - 20 kHz •Dynamic range, analog in to analog out (typical), XLR / aux 111 dB* / 108 dB* •A/D dynamic range, preamplifier and converter (typical), XLR / aux 112 dB* / 110 dB* •D/A dynamic range, converter and output (typical), XLR / aux 118 dB* / 112 dB* •Crosstalk rejection at 1 kHz, adjacent channels 100 dB •Output level, XLR connectors (nominal / maximum) +4 dBu / +21 dBu •Output impedance, XLR connectors (unbalanced / balanced) 75 O / 75 O •Input impedance, TRS connectors (unbalanced / balanced) 20 kO / 40 kO •Non-clip maximum input level, TRS connectors +16 dBu •Aux output level, TRS (nominal / maximum) +4 dBu / +16 dBu •Aux output impedance, TRS (unbalanced / balanced) 150 O / 300 O •Phones output impedance / maximum output level 500 mW @ 75 O / +18 dBu •Residual noise level, XLR out 1-16 connectors, unity gain -97 dBu* •Residual noise level, aux and monitor TRS out connectors -95 dBu* •Displays screen 10inch minimum touch screen •TFT LCD, 1280 x 800 px, •Main stereo meter -- 18 segment (-60 dB to clip) •Controls motor faders 12 + 8 + 4 •Touch-sensitive rotary controls 3 + 7 + 11 + 4 + 4 •Fully assignable rotary controls 4 •Fully assignable backlit buttons 8 + 8 •Variable rotary controls / buttons 4 / 4 •Switch-mode power supply Auto-ranging 115-120 VAC (50/60 Hz) FOB: Destination

0010 1 Each Digital Stage Box

FFP

"Brand Name or Equal to:"

Manufacturer: Behringer Model: S32 32x16 Digital Stage Box Part Number: S32IO An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•32 Midas-designed, fully programmable mic preamps •16 analog, servo-balanced XLR outputs •AES50 network ports •ULTRANET Connectivity for personal monitoring system for in-ear applications •Digital audio and control connectivity for speaker systems with ULTRANET networking capability •Automatic AES50 stage-split mode when connected between Stagebox and Front of House and monitor consoles •Dual AES50 ports for cascading additional S16, SD16 or SD8 stageboxes with no additional equipment being needed.

•2 AES-3 ports (AES/EBU), for directly connecting PA system controllers with digital inputs •Dual ADAT outputs providing 16-channel digital output on two optical connectors •Mute All function for quietly patching any inputs on stage •MIDI In/Out for bi-directional communication between console and on-stage MIDI devices •Remote operation via shielded CAT5e cable 330 feet minimum •USB connector for system updates via PC •Switching power supply for maximum flexibility (115-120 V~), noise-free audio power supply •Compact, 3U rack-mount chassis maximum •Must be compatible to CLIN 0009 FOB: Destination

0011 2 Each Powered Speaker

FFP

"Brand Name or Equal to:"

Manufacturer: Turbosound Model: IQ12 Powered Speaker Part Number:IQ12B An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Bi-amped Power Configuration •8inch speaker minimum •Total Power 2500W minimum •LF Driver Size: 1 x 12" minimum •HF Driver Size: 1" HF Compression Driver minimum •LF Driver Power Amp: 2500W Peak minimum •Frequency Range: 45Hz-20khz (-10 dB) minimum •Peak SPL: 130dB SPL minimum •Inputs: 2 x XLR-1/4" combo (line/mic) minimum •Outputs : 2 x XLR (out A/B), 1 x XLR (mix out) minimum •Data I/O: 2 x Ethernet with Ultranet •Signal Processing: High/Low Shelving EQ, Parametric EQ, Limiter, Wall mountable •Speaker Power Connector •Height: 16in – 32in •Width: 10in – 20in •Depth: 10in – 20in FOB: Destination

0012 1 Each Wall Mount Brackets

FFP

•Must be compatible wtih CLIN 0011 •Horizontal and Vertical Mounting FOB: Destination

0013 2 Each Powered Subwoofer Speaker

FFP

"Brand Name or Equal to:"

Manufacturer: Turbosound Model: IQ18B Powered Sub Speaker Part Number: IQ18B An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•16inches Front Sub Powered Speaker minimum •Power:3000W minimum •Frequency Range: 50Hz-100Hz (+/-3dB), 36Hz-100Hz (-10dB) •Maximum Peak SPL: 127dB (Continuous), 133dB (Peak) •Inputs: 2 x XLR-1/4" combo •Outputs: 2 x XLR •Data I/O: 2 x Ethernet with UltraNet and thru put •Mounting Options: Floor •Height: 18in – 36in •Width: 14in – 28in •Depth: 14in – 28in FOB: Destination

0014 1 Each Wireless Guitar System

FFP

"Brand Name or Equal to:"

Manufacturer: Sennheiser Model: Sennheiser Wireless Guitar System A Band Part Number: EW172G4-A An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Wireless Instrument System for Guitar •System: Simultaneous Channels: 8 minimum •System: Frequency Range: 516-558 MHz (A band) •System: Operating Range: 330 ft. Line-of-sight minimum •System: Channel Selection: Auto/Manual •System: Frequency Response: 25Hz minimum 18kHz maximum •Instrument Cable: Connector 1:1/4" •Instrument Cable: Connector 2:1/8" •Transmitter: Form Factor: Body pack •Transmitter: Mute Feature: Yes •Transmitter: Battery Type:2 x AA or 9 volt •Transmitter: Battery Life:8 hours minimum •Receiver: Antenna Type: Detachable •Receiver: Signal/Noise Ratio: =110dB (A-weighted) •Receiver: Front Panel Display:Yes •Receiver: Type:Rackmount •Receiver: Rackmountable kit included •Receiver: Rack Spaces:Half-rack •Receiver: Outputs: 1 x XLR, 1 x 1/4" •Receiver: Data I/O: 2 x RJ10 FOB: Destination

0015 2 Each Handheld Microphone System

FFP

"Brand Name or Equal to:"

Manufacturer: Sennheiser Model: Wireless Handheld Mic Sys. A Band Part Number: EW1865G4-A An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Simultaneous Systems Per Band: 8 minimum •System: Frequency Range: 516-558 MHz (A band) •System: Operating Range: 330 ft. Line-of-sight minimum •System: Microphone Included •System: Channel Selection: Auto/Manual •Microphone: Type: Condenser •Microphone: Max SPL: 152dB SPL •Microphone: Frequency Response: 80Hz-18kHz •Transmitter: Form Factor: Handheld with Mic Capsule •Transmitter: Mute Feature: Yes •Transmitter: Battery Type: 2 x AA or 9 Volt •Transmitter: Battery Life: 8 hours minimum •Receiver: Antenna Type: Detachable •Receiver: Signal/Noise Ratio: =110dB (A-weighted) •Receiver: Type: Rackmount •Receiver: Rack Spaces: Half-rack •Receiver: Outputs: 1 x XLR, 1 x 1/4" FOB: Destination

0016 1 Each Wireless Handheld and Lavalier Mic Sys

FFP

"Brand Name or Equal to:"

Manufacturer: Sennheiser Model: Wireless Mic and Lavalier Mic Part Number: EW135ME2G4-A1 An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Lavalier/Handheld Combo System •Simultaneous Channels: 8 minimum •Frequency Range: 470-516 MHz •Operating Range: 330 ft. Line-of-sight minimum •Frequency Response: 25Hz-18kHz •Microphone Included •Channel Selection: Auto/Manual •Microphone: Type: Lavalier Condenser, Handheld Dynamic •Microphone: Polar Pattern: Lavalier Omnidirectional, Handheld Cardioid •Microphone: Max SPL: 130dB (lavalier), 154dB (handheld) •Microphone: Connector: 1/8" (lavalier) •Microphone: Frequency Response: 50Hz-18kHz (lavalier) •Microphone: Cable Length: 5 feet minimum. (lavalier) •Microphone: Self Noise: 36dB (lavalier) •Transmitter: Form Factor: Body pack, Handheld •Transmitter: Mute Feature: Yes •Transmitter: Battery Type: 2 x AA or 9 Volt •Transmitter: Battery Life: 8 hours minimum •Transmitter: Connector: 1 x 1/8" •Transmitter: Dimensions: body pack, handheld •Receiver: Antenna Type: Detachable •Receiver: Rackmount kit included •Receiver: Rack Spaces: Half-rack •Receiver: Front Panel Display: Yes •Receiver: Outputs: 1 x XLR, 1 x 1/4" FOB: Destination

0017 1 Each Acoustic Preamp

FFP

"Brand Name or Equal to:"

Manufacturer: LR Baggs Model: Session DI Acoustic Guitar Premap Part Number: SessionDI An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Type: Acoustic Preamp, Direct Box •Height: 1in – 3in •Width: 3in – 5in •Depth: 4in – 8in •Analog Inputs: 1 x 1/4" •Analog Outputs: 1 x XLR, 1 x 1/4" •Multiband Compression FOB: Destination

0018 1 Each Electric Bass DI

FFP

"Brand Name or Equal to:"

Manufacturer: LR Baggs Model: Session DI Electric Bass DI Part Number: StadiumDI An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Type: Bass Preamp, Direct Box •Comp Equalizer •Form Factor: Pedal •Fat Switch •Inputs: 1 x 1/4" •Outputs: 1 x 1/4", 1 x XLR •Power Source: 48V phantom power •Batteries: 9Volt or AA •Height: 1in – 3in •Width: 2in - 6in •Depth: 4in – 8in FOB: Destination

0019 1 Each Direct Box for Orchestral Instruments

FFP

"Brand Name or Equal to:"

Manufacturer: Radial Model: PZ-DI Orchestral Instrument DI Part Number: PZDI An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Adjustable Load, Variable High-pass Filter, Polarity Reverse, and Low-pass Filter •Type: Active Orchestral Instrument DI •Channels: 1 minimum •Pads: -15dB •Polarity Switch: Yes •Ground Lift: Yes •Equalizer: Highpass, Lowpass •Inputs: 1 x 1/4" (Hi-Z) •Outputs: 1 x XLR (balanced out), 1 x 1/4" (thru) •Power Source: 48V phantom power •Batteries: 9Volt or AA •Height: 1in – 3in •Depth: 2in – 6in •Width: 1in - 4in FOB: Destination

0020 3 Each Stereo Interconnect Cable

FFP

•Connector 1: 3.5mm TRS Male ¼ •Length: 10feet minimum •Connector 2: TRS Male 1/8 •Balanced: Yes •Must be compatible with CLIN 0004 FOB: Destination

0021 3 Each Stereo Breakout Cable

FFP

•Connector 1: TRS Male 1/8 •Connector 2: TS Male 1/4 (Pair) •Length: 6 feet minimum •3.5mm TRS to a pair of 1/4-inch TS cables for connecting phones and other handheld devices to unbalanced inputs •Low-noise performance FOB: Destination

0022 1 Each Microphone Cable

FFP

•Connector 1: XLR Male •Connector 2: XLR Female •Length: 10feet minimum •Noise rejection shielding and a covered ground wire FOB: Destination

0023 3 Each Ethernet Cable

FFP

•Connector 1: Cat6 •Connector 2: Cat6 •Length: 100feet minimum •Snagless Design to protect RJ45 Connectors •Supporting Power over Ethernet applications •strain relief FOB: Destination

0024 4 Each Ethernet Cable

FFP

•Connector 1: Cat6 •Connector 2: Cat6 •Length: 50feet minimum •Snagless Design to protect RJ45 Connectors •strain relief FOB: Destination

0025 3 Each USB Cable Type A to Type B

FFP

•USB 2.0

•Connector 1: USB-A •Connector 2: USB-B •Length: 15 feet – 20 feet FOB: Destination

0026 2 Each USB Cable Type C to Type A

FFP

•Type: USB 3.0 Cable •Connector 1: USB-A •Connector 2: USB-C •Length: 6 feet – 8 feet FOB: Destination

0027 1 Each Stereo Bluetooth Audio Receiver

FFP

•Number of Receivers: 1 minimum •Bluetooth •Balanced XLR and Unbalanced •Receiver Frequency Range: 2.4 GHz •Range: 100 feet minimum •Frequency Response: 20Hz-20kHz •Signal/Noise Ratio: > 75 dB •Outputs: 2 x XLR, 2 x 1/4" •Height: 1in – 3in •Width: 4in – 8in •Depth: 3in – 6in

FOB: Destination

0028 3 Each Straight to Right Angle Instrument Cable

FFP

•Connector 1: TS Male 1/4 •Connector 2: TS Male Right Angle 1/4 •Length: 20 feet minimum •Wire Gauge: 20 AWG minimum FOB: Destination

0029 1 Each RF and DC Power Distribution

FFP

"Brand Name or Equal to:"

Manufacturer: RF Venue Model: Ant. Distribution System Part Number: DISTRO4 An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•Type: Antenna Distribution •Channels: 4 minimum •Frequency Range: 470-952 MHz •Connectivity: 16 x BNC (2 inputs, 10 antenna outputs, 4 DC outputs) •Rack mountable with included rack ears: 1RU •Include all RF and DC power cables for connecting 4 receivers •Compatible with CLIN’s 0014, 0015, 0016 FOB: Destination

0030 1 Each VGA Video and Audio to HDMI Converter

FFP

•Model: Component (YPbPr) / VGA To HDMI Converter With Audio - PC to

HDMI

•Resolution 1080p (HDTV) and 1920 x 1200 (PC) (VGA2HD2) minimum •Output Ports: 1 HDMI female minimum •Input Ports: 1 VGA female minimum •Cables Included: 1 x component video cable FOB: Destination

0031 2 Each Multiport to HDMI Digital AV Adapter

FFP

•Model: Multiport to HDMI Digital AV Adapter •AV Cable Type: Vide; o / audio cable •Interface Supported: Mini DisplayPort / HDMI / USB / VGA •Recommended Use: Monitor, Projector •Left Connector Type: 15 pin HD D-Sub (HD-15) - male (input), 19 pin HDMI Type A - male (input), 24 pin USB-C - male (input), Mini DisplayPort - male (input) •Right Connector Type: 19 pin HDMI Type A - male (output), 4 pin USB Type A (power only) - male •Cable Key Features: 1080p minimum •Length: 8 feet minimum FOB: Destination

0032 4 Each Powered Speaker Connector

FFP

"Brand Name or Equal to:"

Manufacturer: PowerCon Model: Pro Co PWRCON/15M-25 25 Power Connect Part Number: PowerConAE25 An “Equal” item must meet the following salient physical, functional, or performance characteristics to be considered for award:

•A 15A-rated assembly packed in a secure-locking, compact housing •25 feet minimum •Compatible with CLIN 0011, 0013 FOB: Destination

0033 1 Each Audio Tower

FFP

•20 space minimum •5 Adjustable Shelves •Integrated cable management •Integrated floor levelers •Tinted glass door IR remote-friendly •Removable back panel FOB: Destination

0034 1 Each AV Rack

FFP

•27 Space minimum •Adjustable rear rails with space markers •Active dual fans with the On/Off switch •All panels are removable with the locks •Heavy-duty casters and leveling feet are pre-installed •Fully-loaded with vented shelves, blanks, dual fans, caster, leveling feet, and pre-installed locks on all doors •Five two-space shelves and five two-space blanks •Reversible front door with either left or right hand opening IR remote friendly •Accessible reversible rear door FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government

0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 1 MMLR04

DAVID PENSANTE

STATION SUPPLY, BUILDING AS-130

MCAS NEW RIVE

JACKSONVILLE NC 28545

910-449-6631 FOB: Destination

MMLR04

0002 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0003 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0004 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0005 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0006 30 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0007 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0008 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0009 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0010 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0011 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0012 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0013 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0014 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0015 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0016 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0017 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0018 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0019 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0020 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0021 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0022 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0023 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0024 30 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0025 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0026 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0027 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0028 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0029 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0030 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0031 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0032 30 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0033 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0034 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-18 Prohibition on Contracting With Entities That Require Certain

Internal Confidentiality Agreements or Statements-- Representation

JAN 2017

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017 52.211-6 Brand Name or Equal AUG 1999 52.211-17 Delivery of Excess Quantities SEP 1989 52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

NOV 2021

ADDENDA TO FAR 52.212-1

Addendum to paragraph (b)(4):

The offeror shall submit with their offer:

Technical Capability:

Descriptive literature outlining the specifications of the items quoted to include drawings, the manufacturer’s name, and manufacturer’s complete part numbers of all items offered.

Delivery Information:

Clearly state if the offeror can meet the required delivery date as stated in each line item. If not then provide an alternate delivery date for each line item.

Addendum to paragraph (b)(6):

The offeror shall submit with their offer:

Price:

The price offered must reflect unit prices, extended amounts per line item, and overall total. (Note: All prices must be actual “face-value” pricing having already accounted for any discounts offered and extended to the Government).

(End of Addenda to Provision)

CLAUSES INCORPORATED BY REFERENCE

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

NOV 2021

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

NOV 2021

52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations

SEP 2019

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022 252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022 252.225-7048 Export-Controlled Items JUN 2013 252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

MAY 2022

252.225-7974 (Dev) Representation Regarding Business Operations with the Maduro Regime (DEVIATION 2020-O0005)

FEB 2020

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7017 Accelerating Payments to Small Business Subcontractors-- Prohibition on Fees and Consideration

APR 2020

252.239-7017 (Dev) Notice of Supply Chain Risk (DEVIATION 2018-O0020). FEB 2019 252.239-7098 (Dev) Prohibition on Contracting to Maintain or Establish a

Computer Network Unless Such Network is Designed to Block Access to Certain Websites - Representation.

(Deviation 2021-O0003)

APR 2021

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7008 Sources of Electronic Parts MAY 2018 252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

BASIS OF AWARD: Quotes will be evaluated based on (1) price; (2) technical capability of the item offered to meet the Government’s requirement; and (3) delivery.

This acquisition will be conducted in accordance with FAR Part 12, Acquisition of Commercial Products and Commercial Services and FAR Part 13, Simplified Acquisition Procedures

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2022) ALTERNATE I (OCT 2014)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision--

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third…