22Q10830001 Amendment.docx

M6700122Q1083

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

Global Changes

CLIN 0001 -- CLIN 0003

The model number MCI J4500 has been added.

The following have been modified:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

MMP1002107987

General Information

1. GENERAL: This is a non-personnel services contract to provide an installation of USMC designated wrap on an USMC II MEF Band Coach Bus. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, tools, materials, supervision, and other items and non-personal services necessary to perform a wrap of USMC II MEF Band Coach Bus as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.2 Background: Current Marine Corps Recruiting Command wrap on (1) USMC II MEF Band Coach Bus is faded and cracked beyond repair. Marine Corps Recruiting Command has a newly designed wrap to replace current wrap.

1.3 Objectives: To turn the II MEF Band Bus, which is used as a recruiting tool, into an improved Marine Corps advertisement platform. The II MEF Band Bus travels frequently outside the Camp Lejeune/MCAS New River complex to various events, to include “high profile” events. The bus is seen by all while traveling on roads, highways and interstates.

1.4 Scope: Service consists of complete removal of current wrap and applying the new wrap. Included in this service: remove and replace nose wrap, remove and replace rear wrap, remove and replace both side wraps to include up to the roof where the current wrap stops. Cut and use heat gun and other special tools to remove and apply the new wrap. Remove the adhesive, strip the vinyl, and clean affected surfaces prior to applying the new wrap. Remove dilapidated perforated window vinyl, remove any adhesive, clean surfaces, and apply digitally printed premium window perforated with laminate. Contractor shall perform all necessary actions, to include material, and labor for removing and applying the new Marine Corps Recruiting Command wrap. Contractor must be located within a 100 miles radius of Camp Lejeune.

0. Period of Performance: The period of performance is July 21, 2022 – Aug 22, 2022. State of current wrap may dictate a short time frame.

1.6 Dimensions:

Year: 2011 Make: MCI Model: J4500

Length: 46 Feet Width: 9 Feet, 4 Inches Height: 13 Feet

1.6.1 Quality Control N/A: The contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. After acceptance of the quality control plan the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system.

1.6.2 Quality Assurance: The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.3 Recognized Holidays: Contractor will maintain normal operating hours per contractor policies.

Independence Day

1.6.4 Hours of Operation: The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance: The work to be performed under this contract will be performed at the contractor’s facility. Government will deliver bus to place of performance.

1.6.6 Type of Contract: The government will award a Firm Fixed Contract.

1.6.7 Physical Security: The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use. At the close of each work period, government equipment, and materials shall be secured.

1.6.8 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1 DEFINITIONS:

2.1.1 CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2 CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.4 DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.5 PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.6 QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 QUALITY ASSURANCE Surveillance Plan (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.9 SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.10 WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.11 WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS:

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1 Materials The Government will provide the new wrap design via email.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Section 3 of this PWS.

(End of Summary of Changes) image1.wmf