21Q1138 Amend -1.pdf

M67001MARINE CORPS FIELD CONTRACTING SYS

ATTN: THETRICE TAYLOR

PO BOX 8368

CAMP LEJEUNE NC 28546

M2712121SUPLSM2

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendent issued to answ er vendor question, update CLINS, update 52.212-2 and add 52.211-6. All other terms and conditions w ill remain the same. See Summary of Detals for changes.

POC: Thetrice Taylor Phone: 910.451.7854 Email: thetrice.taylor@usmc.mil

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 20-Apr-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X M6700121Q1138

X 9B. DATED (SEE ITEM 11)

15-Apr-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

20-Apr-2021

CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

CONTRACTING DEPARTMENT

MCIEAST

308 HOLCOMB BOULEVARD

CAMP LEJEUNE NC 28547-8368

M67001 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE M67001

FACILITY CODECODE

EMAIL:TEL:

M6700121Q1138

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

- Minimum cutting platform 60" x 120" - Fully assembled plug-and-play Computer Numerical Control System (CNC system) w/unitized - Minimum 8.5 inch gantry height - Water pan must support plasma table - Automatic torch height control with touch-and-go initial height sensing - Precision linear rails on both X and Y axes - Dual emergency stop/shut-off switches

To:

MFR: Arc Max or Equal- Minimum cutting platform 60" x 120" - Fully assembled plug-and-play Computer Numerical Control System (CNC system) w/unitized - Minimum 8.5 inch gantry height - Water pan must support plasma table - Automatic torch height control with touch-and-go initial height sensing - Precision linear rails on both X and Y axes - Dual emergency stop/shut-off switches

CLIN 0002

125 amp machine torch integrated into CNC table

MFR: Hypertherm Powermax or Equal125 amp machine torch integrated into CNC table

CLIN 0003

Transmit amperage values and air pressure settings remotely though the G-code Ability to dial down unnecessary amperage on every pierce

MFR: Hyperthem Connect or EqualTransmit amperage values and air pressure settings remotely though the G-code Ability to dial down unnecessary amperage on every pierce

CLIN 0007

Includes a minimum of: - 125 amp nozzles / Quanity: 5- 105/85/65 amp nozzles / Quanity: 5- 45 amp nozzles / Quanity: 5- Electrodes / Quanity: 10- Fine cut nozzles / Quanity: 5- Replacement 125 amp shield / Quanity: 1- Replacement 105/85/65 / Quanity: 1- 45 amp shield / Quanity: 1- Fine cut shield / Quanity: 1 - Replacement swirl ring / Quanity: 1

MFR: Hypertherm PowerMax or EqualIncludes a minimum of: - 125 amp nozzles / Quanity: 5- 105/85/65 amp nozzles / Quanity: 5- 45 amp nozzles / Quanity: 5- Electrodes / Quanity: 10- Fine cut nozzles / Quanity: 5- Replacement 125 amp shield / Quanity: 1- Replacement 105/85/65 / Quanity: 1- 45 amp shield / Quanity: 1- Fine cut shield / Quanity: 1 - Replacement swirl ring / Quanity: 1

CLIN 0009

Software for advanced mechanized cutting Must be compatible with Windows Computers

MFR: HyperTherm ProNest or EqualSoftware for advanced mechanized cutting Must be compatible with Windows Computers

CLIN 0012

The CLIN description has changed from Plate Maker Attachment to Plate Marker Attachment.

CLIN 0013

Compatible to hold hypertherm plasma cutting machine 65Compatible to hold hypertherm plasma cutting machine

MFR: Hypertherm or EqualCompatible to hold hypertherm plasma cutting machine 65Compatible to hold hypertherm plasma cutting machine 85

CLIN 0014

Software add-onSheet CAM bundled with a pipe joint design tool Draws complex header, branch holes and copesProduce fish-mouths, saddle-cuts, and other pipe-fitting joints

MFR: Pipefit Software License or EqualSoftware add-onSheet CAM bundled with a pipe joint design tool Draws complex header, branch holes and copesProduce fish-mouths, saddle-cuts, and other pipe-fitting joints

CLIN 0015

Pro Software and LicenseCompatible with Windows computers

MRF: Vcarve or EqualPro Software and LicenseCompatible with Windows computers

The following have been added by reference:

52.211-6 Brand Name or Equal AUG 1999

The following have been added by full text:

QUESTION AND ANSWER

Question #1: I just want to ask what brand do you prefer for the CNC Plasma Table?

Answer #1: The brand Arc Max or an equal brand is requested for this requirement.

The following have been modified:

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) “(TAILORED)”

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

This is Brand Name or Equal Requirement.

This procurement is 100% Small Business Set Aside. All responsible small business sources may submit a response which, if received in a timely manner, will be considered by the agency.

Each vendor must ensure that the following completed provisions accompany their quote:

- FAR Provision 52.204-24 (Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment)

- DFARS Provision 252.204-7016 [Covered Defense Telecommunications Equipment or Services— Representation (Dec 2019)]

- DFARS Provision 252.204-7017 [Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services—Representation (Dec 2019)]

An award will be made on the basis of best value, price and other factors considered. The Government intends to make an award to the vendor whose proposal represents the best value to the Government based on (1) vendor’s ability to meet the technical specifications, (2) delivery and (3) price.

Technical acceptability will be based on the demonstrated ability to meet the technical requirements, including the delivery requirement. A mere statement that the vendor “will meet the Government’s requirements” is insufficient;

the vendor must demonstrate how it will meet the requirement.

To ensure technical compliance with the requirements, vendor quotes shall include the following information:

a. Vendor Specifications. The manufacturer’s name and manufacturer’s complete part numbers of items shall be submitted in the quote.

b. Vendor’s quote shall include an active Cage Code and Federal Tax Identification number. Vendors are required to be registered with SAM database and have an active cage code at the time of submission of quote.

c. Delivery. Clearly state if the quoter can meet the delivery date as stated in each CLIN. If not, then state the best delivery date.

Past performance will be verified via the Past Performance Information Retrieval System (PPIRS).

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(c) Quotes are to be submitted via email to thetrice.taylor@usmc.mil at 910-451-7854 by the response date notated on the solicitation.

(End of provision)

(End of Summary of Changes)