20Q0005_Albany_Training_Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

M6700120Q0005 17-Oct-2019

b. TELEPHONE NUMBER

910-451-1591

8. OFFER DUE DATE/LOCAL TIME

04:00 PM 21 Nov 2019

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M67001

9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JOHN W. HOUNSHELL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

P.O. BOX 8368 BLDG 1116

CAMP LEJEUNE NC 28547-8368

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M95028 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

HEADQUARTERS BATALLION MCLB

KEVIN BARKER

814 RADFORD BLVD

ALBANY GA 31704

TEL: 229-639-5438 FAX:

FAX:

TEL:

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$11,000,000

NAICS:

611699

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF79

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6700120Q0005

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 2 Each Low Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Low Voltage Safety w/Arc Flash

PURCHASE REQUEST NUMBER: M95028S0SUBASTC

PSC CD: U099

NET AMT

0002 1 Each High Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: High Voltage Safety w/Arc Flash

PURCHASE REQUEST NUMBER: M9502820SUBASTC

0003 1 Each Intermediate Direct Digital

FFP

Controls Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Intermediate Direct Digital Controls

0004 1 Each Advanced Electrical Troubleshooting

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Advanced Electrical Troubleshooting

0005 1 Each Motor Drives and Control Circuits

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Motor Drives and Control Circuits

0006 1 Each Water Distribution Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Water Distribution Operation

0007 1 Each Ladder Drawing, Schematics & Diagrams

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Ladder Drawing, Schematics & Diagrams

0008 1 Each Intermediate HVAC Controls and

FFP

Distribution Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Intermediate HVAC Controls

PURCHASE REQUEST NUMBER: M9502820SUPPATC

0009 1 Each Waste Water Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Waste Water Operation

PURCHASE REQUEST NUMBER: M9502920SUPPATC

0010 1 Each NFP 101 Life Safety (current edition)

FFP

Code Overview Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: NFP 101 Life Safety

0011 1 Each OSHA and Program Required Fall

FFP

Protection Competent Person and Authorized Person Training: See Performance

Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: OSHA and Program Required Fall

0012 1 Each Plumbing and Pipefiting

FFP

Plants & Buildings Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Plumbing and Pipefiting

0013 1 Each Understanding Variable Frequency Drives

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Understanding Variable Frequency Drives

0014 1 Each Programmable Logic Controllers (PLC)

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Programmable Logic Controllers

0015 1 Each Advance Boiler Operation & Maintenance

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Advance Boiler Operation & Maintenance

1001 2 Each Low Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Low Voltage Safety w/Arc Flash

1002 1 Each High Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: High Voltage Safety w/Arc Flash

1003 1 Each Intermediate Direct Digital Controls

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Intermediate Direct Digital Controls

1004 1 Each Advanced Electrical Troubleshooting

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Advanced Electrical Troubleshooting

1005 1 Each Motor Drives and Control Circuits

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Motor Drives and Control Circuits

1006 1 Each Water Distribution Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Water Distribution Operation

1007 1 Each Ladder Drawing, Schematics & Diagrams

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Ladder Drawing, Schematics & Diagrams

1008 1 Each Intermediate HVAC Controls and

FFP

Distribution Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: ntermediate HVAC Controls

1009 1 Each Waste Water Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Waste Water Operation

1010 1 Each Facilities Estimating RSMEANS

FFP

Seminar: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Facilities Estimating RSMEANS Seminar

1011 1 Each OSHA and Program Required Fall

FFP

Protection Competent Person and Authorized Person Training: See Performance

Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: OSHA and Program Required Fall

1012 1 Each Plumbing and Pipefitting

FFP

Plants & Buidlings Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Plumbing and Pipefitting

1013 1 Each Understanding Variable Frequency Drives

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Understanding Variable Frequency Drives

1014 1 Each Programmable Logic Controllers (PLC)

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Programmable Logic Controllers

1015 1 Each Advanced Boiler Operation & Maintenance

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Advanced Boiler Operation & Maintenance

1016 1 Each 2018 NFPA Fire Code Overview

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: 2018 NFPA Fire Code Overview

2001 2 Each Low Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Low Voltage Safety w/Arc Flash

2002 1 Each High Voltage Safety w/Arc Flash

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: High Voltage Safety w/Arc Flash

2003 1 Each Intermediate Direct Digital Controls

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: ntermediate Direct Digital Controls

2004 1 Each Advanced Electrical Troubleshooting

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Advanced Electrical Troubleshooting

2005 1 Each Motor Drives and Control Circuits

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Motor Drives and Control Circuits

2006 1 Each Water Distribution Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Water Distribution Operation

2007 1 Each Ladder Drawings, Schematics & Drawings

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUBASTC

MFR PART NR: Ladder Drawings, Schematics & Drawings

2008 1 Each Intermediate HVAC Controls and

FFP

Distribution Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: ntermediate HVAC Controls

2009 1 Each Waste Water Operation

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Waste Water Operation

2010 1 Each Mechanical & Electrical Estimating

FFP

RSMEANS Seminar: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Mechanical & Electrical Estimating

2011 1 Each OSHA and Program Required Fall

FFP

Protection Competent Person and Authorized Person Training: See Performance

Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: OSHA and Program Required Fall

2012 1 Each Plumbing and Pipefitting

FFP

Plants & Buildings Training: See Performance Work Statement

FOB: Destination

MFR PART NR: Plumbing and Pipefitting

2013 1 Each Understanding Variable Frequency Drives

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Understanding Variable Frequency Drives

2014 1 Each Programmer Logic Controller (PLC)

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Programmer Logic Controller

2015 1 Each Advanced Boiler Operation & Maintenance

FFP

Training: See Performance Work Statement

FOB: Destination

MILSTRIP: M9502820SUPPATC

MFR PART NR: Advanced Boiler Operation & Maintenance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination N/A Destination Government

0002 Destination N/A Destination Government

0003 Destination N/A Destination Government

0004 Destination N/A Destination Government

0005 Destination N/A Destination Government

0006 Destination N/A Destination Government

0007 Destination N/A Destination Government

0008 Destination N/A Destination Government

0009 Destination N/A Destination Government

0010 Destination N/A Destination Government

0011 Destination N/A Destination Government

0012 Destination N/A Destination Government

0013 Destination N/A Destination Government

0014 Destination N/A Destination Government

0015 Destination N/A Destination Government

1001 Destination N/A Destination Government

1002 Destination N/A Destination Government

1003 Destination N/A Destination Government

1004 Destination N/A Destination Government

1005 Destination N/A Destination Government

1006 Destination N/A Destination Government

1007 Destination N/A Destination Government

1008 Destination N/A Destination Government

1009 Destination N/A Destination Government

1010 Destination N/A Destination Government

1011 Destination N/A Destination Government

1012 Destination N/A Destination Government

1013 Destination N/A Destination Government

1014 Destination N/A Destination Government

1015 Destination N/A Destination Government

1016 Destination N/A Destination Government

2001 Destination N/A Destination Government

2002 Destination N/A Destination Government

2003 Destination N/A Destination Government

2004 Destination N/A Destination Government

2005 Destination N/A Destination Government

2006 Destination N/A Destination Government

2007 Destination N/A Destination Government

2008 Destination N/A Destination Government

2009 Destination N/A Destination Government

2010 Destination N/A Destination Government

2011 Destination N/A Destination Government

2012 Destination N/A Destination Government

2013 Destination N/A Destination Government

2014 Destination N/A Destination Government

2015 Destination N/A Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 19-DEC-2019 TO

30-SEP-2020

N/A HEADQUARTERS BATALLION MCLB

KEVIN BARKER

814 RADFORD BLVD

ALBANY GA 31704

229-639-5438

FOB: Destination

M95028

0002 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0006 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0007 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0008 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0009 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0010 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0011 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0012 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0013 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0014 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

0015 POP 19-DEC-2019 TO

N/A (SAME AS PREVIOUS LOCATION)

1001 POP 01-OCT-2020 TO

30-SEP-2021

N/A (SAME AS PREVIOUS LOCATION)

1002 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1003 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1004 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1005 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1006 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1007 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1008 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1009 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1010 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1011 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1012 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1013 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1014 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1015 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

1016 POP 01-OCT-2020 TO

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 01-OCT-2021 TO

30-SEP-2022

N/A (SAME AS PREVIOUS LOCATION)

2002 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2003 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2004 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2005 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2006 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2007 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2008 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2009 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2010 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2011 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2012 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2013 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2014 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

2015 POP 01-OCT-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

INSTRUCTIONS TO QUOTERS

This acquisition will be conducted in accordance with FAR Subpart 13.5, Simplified Procedures for Certain

Commercial Items.

The United States Marine Corps MCIEast Contracting Department intends to procure vocational training services services. M6700120Q0005 is issued as a Request for Quotation (RFQ) to provide the Government vocational training services. The contractor shall provide all instructors, course materials, and course certificates to students identified by Public Works Branch Marine Corps Logistics Base Albany, GA. The contractor shall accomplish the functions outlined in the Performance Work Statement. The location of performance is Marine Corps Logistics

Base Albany, GA. The RFQ documents and incorporates provisions and clauses that are in effect through Federal

Acquisition Circular FAC 2019-06, effective 10 September 2019 and DFARS Change Notice DPN 20190628, effective 28 June 2019. This solicitation is unrestricted. The associated North American Industrial Classification

System (NAICS) code for this requirement is 611699. The provision at 52.212-1, Instructions to Offerors –

Commercial Items applies to this acquisition. The service the contractor provides shall comply with all Federal, State, and Local regulations.

The period of performance is estimated to be 19 December 2019 to 30 September 2020 plus two (2) one-year option periods covering 01 October 2020 to 30 September 2021 and 01 October 2021 to 30 September 2022. This acquisition is expected to result in a firm-fixed price level of effort term open market contract that will be awarded to the offeror whose proposal demonstrates the best value to the Government.

Quotes shall be received by the Contracting Department by 4:00 pm (EST), on 21 November 2019, to be considered for award. Vendor may send quotes, via e-mail, to john.hounshell@usmc.mil, or the quotes may be mailed, shipped or faxed to (910) 451-2331. All portions of the quote, even those submitted separately via mail, fax, courier, email, or other shipment shall also be received by 4:00 pm (EST), on 21 November 2019. The information submitted shall be clear and legible (Note: repetitively copied data loses its clarity and legibility). The address for submitting quotes, via United States Postal Service (USPS) is: Contracting Department, Attn: John Hounshell, PSC Box 8368, Camp

Lejeune, NC 28547. If the method for submitting a quote is courier service, the delivery address is: Contracting

Department, Attn: John Hounshell, Bldg. 1116, Birch Street, Marine Corps Base, Camp Lejeune, NC 28547-8368.

The technical quote is to be submitted with vendor’s identifying information ONLY on the cover page of the technical quote. Failure to follow this instruction may result in rejection of the quote.

All questions shall be submitted to john.hounshell@usmc.mil via email only NLT 13 November 2019.

The Government will not accept questions after 13 November 2019 at 4:00 PM EST.

PERFORMANCE WORK STATEMENT

Safety and Technology Training

Marine Corp Logistics Base, Albany

SECTION 1

1.0 Scope of Work. Marine Corp Logistics Base, Installations & Environmental (I&E) Public Works Branch has a requirement for professional development training to be delivered in Fiscal Year 2020 (FY20) and thereafter annually. The training contributes to the continuing education requirements for certain trades. The training will provide technical knowledge for the identified trades within the Public Works Branch.

1.1 Employees.

1.1.1 The Government reserves the right to restrict the employment of any Contractor employee who violates federal regulations or is identified as a potential threat to the security, safety, health or operational mission of this base and its population. Contractor employees are allowed on base while in a work status. They shall not loiter on or around the base during off duty hours. The removal of such persons shall not relieve the Contractor from providing all the services described herein.

1.1.2 The Contractor shall furnish sufficient number of qualified supervisory, administrative, and labor/journeyman personnel to accomplish all required contract services. The Contractor shall be staffed at all times during normal working hours with personnel authorized to book shipments and arrange for services under this contract. The

Contractor shall provide English reading, speaking, and writing personnel at all times during vocational training services. Any personnel appearing to be under the influence of alcohol or drugs or using abusive language shall be replaced with qualified personnel for completion of services being performed. During the performance of this contract, Contractor's employees shall wear neat, clean clothing. The Contractor’s employees shall be identified by having company and employee name on or attached to the upper front of their clothing/uniform. The Contractor is responsible for acquiring an appropriate number of uniforms, tags or badges to meet these requirements at his own expense and without cost to the employee.

1.1.3 Conflict of Interest. The Contractor shall not employ the following personnel:

a. Off-duty quality assurance personnel.

b. An employee of the U.S. Government if the employment of that person would create a conflict of interest.

c. An alien who does not have a valid U.S. Immigration Alien Registration card.

1.1.4 Physical Location. The awarded contractor will provide training and all related course materials aboard

Marine Corps Logistics Base (MCLB) Albany, Georgia at a location to be designated by the Contracting Officer

Representative (COR).

1.2 Base Access.

1.2.1 Contractors must be registered in the Defense Biometrics Identification System (DBIDS).

1.2.2 Contractors requiring access for over 60 days will receive a credential valid for up to one year.

1.2.3 Contractors requiring access for less than 60 days will receive a temporary paper pass.

1.2.3 If you have additional questions regarding DBIDS contact the MCLB, Albany Visitor Control Center at 229-

639-5100/5200.

1.2.4 Contractor Common Access Card (CAC) eligibility: Contractor personnel authroized CAC are exempt from

DBIDS enrollment.

1.2.5 For information concerning contractor access, please contact the Visitor Control Center at 229-639-5100/5200 or visit Marine Corps Logistics Base Albany (https://www.albany.marines.mil/Resources/MCLB-Offices-Staff/Pass-and-ID/) website.

1.2.6 The Government will not be responsible for any access delays. Delays that may result from inadequate planning are contractor responsibility.

1.3 Working Hours. The Contractor shall perform all periods of instruction between the hours of 8:00 AM to 4:00

PM.

1.4 Work Schedule Adjustments Due to Emergency Base Closures. In the event of a base closure due to national emergencies, inclement weather conditions (snow and ice storms, hurricanes, tornadoes, etc.) and other emergency situations, notification will be given by television and radio announcements, telephone, verbal means, etc. The MCLB Albany Public Works Branch will contact you, or you can contact them at 229-639-7600 for further information.

1.5 Geographical Area of Responsibility. Services under this contract will be performed on MCLB Albany, GA at a location to be designated via separate correspondence by the COR.

1.6 Safety Regulations. The Contractor shall obey and conform to all the Occupational Safety and Health

Administration (OSHA) and Base Safety Regulations. Base Safety Regulations may be obtained from the Base

Safety Officer. The Contractor shall maintain accurate records and report to the Contract Administrator within sixteen (16) working hours after occurrence, exposure data, and all accidents resulting in death, traumatic injury, occupational disease, or damage of property, materials, supplies, and/or equipment incidental to contract performance. The Contract Administrator will notify the Contractor of any noncompliance with the foregoing provisions and the action to be taken. The Contractor shall, after receipt of such notice, immediately correct the condition. If the Contractor fails or refuses to comply with safety requirements, the Contracting Officer may issue an order stopping all or part of the work until satisfactory corrective action has been taken. No part of the time lost due to any such stop order shall be made the subject of claims for extension of time or for excess costs or damages to the Contractor. The Contractor shall confer with the Base Safety Officer to coordinate and implement applicable safety rules and regulations prior to commencement of contract work. The Government shall maintain the right to inspect for safety conditions and safe working practices periodically or as considered necessary by the Contracting

Officer or safety personnel.

1.7 Indemnity. The Contractor hereby agrees to indemnify and hold harmless the United States of America and its agents from any suits, fines, actions, claims, debts, demands, judgments, liabilities, costs and expenses, including but not limited to attorney's fees or court costs, which the United States of America and its agents may become obligated to defend and/or pay, (i) as a result of ground or water pollution, sustained or suffered because of or by reason of any action or inaction by the Contractor, his agents, servants, and employees, in connection with the

Contractor’s performance under this contract, or (ii) as a result of any loss of or damage to property or injury to or death of any person whatsoever, sustained or suffered because of or by reason of any action or inaction by the

Contractor, his agents, servants and employees, in connection with the Contractor’s performance under this contract, or (iii) as a result of alleged pollution, damage, or injury, sustained or suffered because of or by reason of any action or inaction by the Contractor, his agents, servants, and employees, in connection with the Contractor’s performance under this contract.

1.8 Government Observations. Other Government personnel, such as the COR, Department of Defense

Inspection Teams, Navy Auditors, Environmental Inspectors, Contracting, or other higher headquarters staff, etc., are authorized to observe Contractor operations. However, personnel will not interfere with Contractor performance.

1.9 Quality Control Plan. The Contractor shall establish and maintain a complete quality control program to assure the requirements of the contract are provided as specified in Section 7 of the Performance Work Statement

(PWS). When the Government requests copies of these records, the Contractor shall furnish them within eight (8) working hours after notification. Failure to provide copies is a violation of the requirements under this contract.

The Contractor’s Quality Control Plan shall include, but not be limited to the following:

1.9.1 An inspection and/or testing system covering the services stated in Section 2 of the PWS. It shall specify areas to be checked on either a scheduled or unscheduled basis, how often inspections will be accomplished, and title of the individual(s) who shall perform the inspection and/or testing.

1.9.2 The methods for identifying and preventing deficiencies in the quality of services performed before the level of performance is unacceptable.

1.9.3 On-site records of all inspections conducted by the Contractor necessary and corrective action taken when discrepancies have been found. This documentation shall be made available to the Government for review anytime during the term of this contract.

SECTION 2

2.0 Description of Services to be Procured.

Vendor must provide the courses, listed below up to the number of attendees specified for each course, on a semi-annual and annual schedule. The actual course schedule will be coordinated through the COR following contract award.

8:00 AM – 4:00 PM scheduled time each day for each two (2) or three (3) day course.

Provide all printed course materials.

Provide course completion certificates to attendees at the end of the last day of the training event.

Provide supplies: Roster/Sign in sheet, pens, paper, name tents, markers.

Ship course materials/supplies to training site on base prior to the beginning of the course.

Provide qualified instructor(s).

Conduct course evaluations and provide copy to the customer at the end of each course.

Provide the original Roster/Sign in sheets to the customer after each course.

For all of the courses listed below, the vendor shall provide information and coursework designed to increase the individual student’s body of knowledge and awareness of the generally accepted best practices and industry standards within the subject matter area of each course. A particular emphasis should be placed on work place safety and OSHA standards as applicable. Course completion certificates and course critiques shall be provided for each student completing each course.

All instructors should have a minimum of ten (10) years industry experience in the specific subject area for the course being presented or experience as a mechanical or electrical engineer. In addition, each instructor should have a minimum of five (5) years of instructor experience.

Instructors should meet with the COR and/or other Public Works Branch leadership prior to the start of the course to ensure all materials to be presented are correct. The instructor should also meet with the COR following course completion to debrief the course and review student critiques. This will serve as the main quality assurance and surveillance tool to ensure the Contractor’s instructors are meeting course objectives.

CLINs: 0001, 1001, 2001 Annual Recurrences # Attendees

Low Voltage Safety w/Arc Flash 2 15

Basic electrical safety to include OSHA 1910 “Qualified Worker” Sub Part S annual refresher. Electrical Arc Flash

Protection to teach qualified personnel who work on, around, or near any type of electrically energized equipment and have been previously trained in general industry safe work practices. Electrical hazards, proper electrical work practices and procedures, and the safe installation of electrical equipment will be discussed. How the National Fire

Protection Association (NFPA) 70E requirements work in conjunction with the OSHA requirements. The course should be designed to keep employees safe and up-to-date and provide lifesaving information. Include any current

NFPA and National Electrical Code (NEC) safety revisions.

CLINs: 0002, 1002, 2002 Annual Recurrences # Attendees

High Voltage Safety w/ Arc Flash 1 10

The key aspect of OSHA’s standard for generation, transmission, and distribution, 29 CFR 1910.269 and the

National Electrical Safety Code (NESC) 2017. These standards apply to organizations that either generate electricity or transmit energy to others. It also applies to organizations that have their own sub-stations or electrical distribution systems. Including the NFPA 70E for Arc Flash Safety, recognize and avoid unsafe work areas, correct approach distances, understanding the proper voltage rated tools and the use of proper personal protection equipment. Also, issues central to the safe performance of every day jobs, loss of life or serious injuries can be reduced and eliminated from the workplace. Include any current NEC revisions.

CLINs: 0003, 1003, 2003 Annual Recurrences # Attendees

Intermediate Direct Digital Controls 1 15

Utilization of hardware systems and personal system interface software with emphasis on Schneider Electric

Niagara AX Software. Overview of operations and maintenance of direct digital systems to include networkers, local controllers, equipment specific controllers, variable air volume controllers, repeaters, lightning arrestors, and host computers with emphasis on Schneider Electric (Invensys) hardware at the intermediate technician level. The basics of inputs, outputs, and addressing communications and local area network (LAN) configurations. Overview of equipment selection, system design, and sample programming. Developing simple loop systems, multi-loop air handling systems, alarms, and report generation. How to debug and troubleshoot DDC equipment and programs.

CLINs: 0004, 1004, 2004 Annual Recurrences # Attendees

Advanced Electrical Troubleshooting 1 15

Advanced technician level training for electrical maintenance workers providing an in-depth, hands-on understanding of complex controls and circuits. Training shall focus on hands-on troubleshooting of a large variety of system components ranging from forward/reversing motor control circuits to proximity and float switches. Class topics shall include advance skills for troubleshooting, testing field components (with hands-on lab), build and troubleshoot advanced motor control circuits (with hands-on lab), troubleshooting variable frequency drives (VFDs), and power quality problems (with hands-on lab). Minimum three day class.

CLINs: 0005, 1005, 2005 Annual Recurrences # Attendees

Motor Drives and Control Circuits 1 15

Intermediate technician level training for maintenance workers providing training on common problems of motor failure with the objective of helping technicians identify the true cause of motor failure and prevent future incidents.

This course shall provide an overview of motor basics, proper replacement procedures, and fundamental motor control circuits. Class topics shall include skills for troubleshooting, motor selection, maintenance, testing and replacement, procedures for replacing a motor, control circuits, motor drives, and special control circuit applications.

Minimum three day class.

CLINs: 0006, 1006, 2006 Annual Recurrences # Attendees

Water Distribution Operation 1 10

Water Operators licensed with the State of Georgia must complete required certification training on a biannual basis.

This annual vocational training provides between 12 and 24 continuing education units (CEUs) required to maintain license requirements, depending upon the class of license . Authorized trainers must be approved by the State Board of Examiners for Certification of Water and Wastewater Treatment Plant Operators and Laboratory Analysts.

Coursework must include training in the operation of water treatment processes, process controls, water distribution systems, laboratory testing, and sample collection. Training in laboratory safety and safe handling procedures are also permitted in this training course.

CLINs: 0007, 1007, 2007 Annual Recurrences # Attendees

Ladder Drawings, Schematics & Diagrams 1 15

Provide a course focusing on Electrical Ladder Drawings, Schematics & Diagrams for maintenance technicians to enhance essential skills in the field of equipment maintenance, installation, or modification through the ability to read and understand electrical ladder drawings, schematics, and diagrams. This course shall cover several types of industrial control points for a variety of different motor-driven processes, with emphasis on the differences between types, purposes, and flow of each. It shall provide exercises to create schematic diagrams based on circuit descriptions and to interpret schematic drawings to provide verbal and written circuit descriptions. Class topics shall include fundamentals for electrical print reading, component symbols, international electric code (IEC) symbols, single line diagrams, relay operations, National Electrical Manufacturers Association (NEMA) and IEC circuit comparison, motor control circuits, and program logic control (PLC) ladder diagrams.

CLINs: 0008, 1008, 2008 Annual Recurrences # Attendees

Intermediate HVAC Controls 1 15 and Distribution

Heating, Ventilation, and Air Conditioning (HVAC) Controls and Distribution course for an HVAC system’s safe and efficient maintenance and operation. How to maintain the peak efficiencies of systems that will minimize the downtime spent on maintenance and maximize energy efficiency. Intermediate level servicing and troubleshooting air conditioning and refrigeration equipment, while expanding knowledge of heating and ventilation systems and the electrical systems that control them. How to troubleshoot air conditioning system electrical and mechanical problems and how to legally recover, recycle, and reclaim refrigerants. Include forced air furnaces and rooftop packaged systems, air movement and balance, fans, filters, pilot burner systems and flame safeguard devices in the course.

CLINs: 0009, 1009, 2009 Annual Recurrences # Attendees

Waste Water Operation 1 10

Wastewater Operators licensed with the State of Georgia must complete required certification training on a biannual basis. This annual vocational training provides between 12 and 24 continuing education units (CEUs) required to maintain license requirements, depending upon the class of license. Authorized trainers must be approved by the

State Board of Examiners for Certification of Water and Wastewater Treatment Plant Operators and Laboratory

Analysts. Coursework must include training in the operation of wastewater treatment processes, process controls, sludge management, laboratory testing, and sample collection. Training in laboratory safety and safe handling procedures are also permitted in this training course.

CLIN: 0010 Annual Recurrences # Attendees

NFPA 101 Life Safety (current edition) Base Year Only 10

Code Overview

Provide a period of instruction from the current edition covering the following:

Overview and use of NFPA 101.

Recognize the limitations and extent of the codes related to existing buildings.

Recognize the classifications of work associated with existing buildings.

Identify systems, buildings, and facilities that need to be upgraded.

Recognize life safety consideration in the estimating and scoping of maintenance and construction projects.

Identify unsafe interior finishes that need to be replaced.

Determining adequate means of egress.

Identify needed accessibility improvements.

Identify improvements to structural systems.

This period of instruction will introduce critical concepts of the NFPA 101 Life Safety Code (current edition). It will provide a basis for the correct use and application of the code. It will build an understanding of the intent of the code through detailed basic tables, categorizations, and a case study.

Materials Included should include: NFPA 101 Life Safety Code (current edition).

CLIN: 1010 Annual Recurrences # Attendees

Facilities Estimating Option Year 1 Only 10

RSMEANS® Seminar

Provide an RSMEANS® Facilities Estimating Seminar covering the following:

Understand the “big picture” estimating process.

Review the process of construction cost estimating in a facilities renovation environment.

Learn that final pricing is only as accurate as understanding the scope of the project.

Review real-life projects, along with checklists for respective divisions.

Gain on overview of quantity takeoff and project pricing, with special focus on the front-end of the process

(scoping).

Learn to estimate from a contractors prospective.

Discussions of site visits, plans/specifications, record drawings of facilities, and site-specific lists.

Review types of scope of work – AE (architect/engineer) scope, context scope, and process scope.

Estimating process of scope of work.

Consequences of poor scope of work.

Assessing scope of work.

Hands-on exercises which require scope, takeoff, and pricing and impact of written scope of work on the estimator.

Materials Included should include:

RSMEANS® Estimating Handbook.

Commercial Renovation Costs with RSMEANS® Data.

Assessing Scope of Work with RSMEANS® Data for Facilities Construction Estimating Seminar Workbook.

Course shall be approved for Continuing Education Units (14 hours, 1.4 recertification credits) by both the

American Institute of Architects Continuing Education System (AIA/CES) and the Association for the Advancement of Cost Engineering (AACE) International Certification Board.

CLIN: 2010 Annual Recurrences # Attendees

Mechanical & Electrical Estimating Option Year 2 Only 10

RSMEANS® Seminar

Provide and RSMEANS® Mechanical & Electrical Estimating Seminar covering the following:

Mechanical and Electrical estimating overview.

How using industry-standard RSMEANS® cost data can save you time and boost accuracy, how to get maximum value from RSMEANS® incomparable costs annuals, how to customize and adapt the

RSMEANS® costs, and more.

A look at order-of-magnitude, square foot, assembly and unit cost estimates, when to use which one, and what each can tell you about project costs.

Key elements of a unit cost estimate – including materials, labor, equipment, profit, and overhead.

Getting the quantity take-off right.

Comparative cost analysis, and how it can save you money on system design and equipment building codes.

Electrical load requirements.

Cost and time saving techniques that boost efficiency without sacrificing accuracy.

Special estimating challenges such as large commercial and industrial projects, and multi-family residential construction.

The benefits of standardized forms: organization, accuracy, consistency, and completeness.

Electrical & Mechanical Estimating Methods (or separate publications on each).

RSMEANS® Electrical Cost Data.

RSMEANS® Mechanical Cost Data.

RSMEANS® Mechanical & Electrical Estimating Seminar Workbook.

Shall be approved for Continuing Education Units by AIA/CES or AACE.

CLINs: 0011, 1011, 2011 Annual Recurrences # Attendees

OSHA and Program Required Fall 1 25

Protection Competent Person and

Authorized Person Training 4-Day

Part 1. Provide 16 hours of hands-on training on the roles and responsibilities of the Competent Person (CP) for Fall

Protection. Training should cover the following (in addition to the authorized person/end-user training):

Various fall protection systems.

Donning of the equipment.

Proper inspection and record keeping.

Recognizing and identifying fall risks at a work-site.

Equipment installation techniques.

Proper anchoring and tie off techniques.

Risk assessment and hazard ranking.

Review and approval of fall protection and prevention plans and rescue evaluation plans.

Fall protection regulations.

Plan and specify reviews and approvals.

Part 2. Provide 16 hours of hands-on training for authorized/end-user persons for fall protection using local equipment on-site. Training should cover the following:

Proper selection and safe use equipment.

Application limits.

Proper anchoring and tie-off techniques.

Estimation of fall distances.

Determination of deceleration distance.

Total fall distance.

Methods of inspection.

Storage, care, and maintenance of equipment.

Applicable regulations.

Limitations of equipment.

Specific lifelines.

Rescue and self-rescue techniques.

Recognize fall hazard deficiencies.

Recognize fall risks at a worksite.

CLINs: 0012, 1012, 2012 Annual Recurrences # Attendees

Plumbing and Pipefitting for Plants & Bldgs. 1 10

Cover the requirements for installing and inspecting plumbing systems so that the government will be in compliance with the International Plumbing Code, which is the industry standard for installation and inspection. Explain the proper plumbing standards for a wide variety of technicians and personnel and establish minimum regulations for plumbing systems using prescriptive and performance related provisions. Provide a full explanation of plumbing fixtures and prohibited fixtures. Explain general regulations, types of joints, plumbing fixtures, water heater installations, and installation of the water distribution system, and requirements regarding changes in the direction of flow, sanitary drainage systems, testing, indirect waste piping, and gas pipe.

CLINs: 0013, 1013, 2013 Annual Recurrences # Attendees

Understanding Variable Frequency 1 15

Drives 3-Day

Provide a hands-on Variable Frequency Drives (VFDs) course introducing Maintenance Technicians to VFDs and their application in industrial plants and commercial buildings. Training will demonstrate how to improve VFD control and efficiency, troubleshoot and repair VFDs, reduce equipment downtime, and elimate chronic VFD problems. Class shall provide hands-on activities with actual or simulated VFDs and cover input of motor data, setting parameters for speed control and overcurrent protection, and interpreting fault codes. Other topics shall include VFD safety, electrical basics control, load types, installation, wiring and grounding, controlling and setup, programming, and troubleshooting. Minimum three day class.

CLINs: 0014, 1014, 2014 Annual Recurrences # Attendees

Programmable Logic Controllers (PLC) 1 15

PLCs for non-programmers course shall provide hands-on demonstrations introducing the complex world of automation and PLCs presented in a practical lesson that maintenance technicians (non-programmers) can understand. Students shall gain understanding of common PLC language, read and interpret PLC ladder logic, troubleshoot PLC systems and components, and fix common PLC problems

CLINs: 0015, 1015, 2015 Annual Recurrences # Attendees

Advanced Boiler Operation & Maintenance 1 10

Provide a detailed explanation of the following: understanding of operator responsibilities related to safety, reliability and efficiency of residential, commercial, and industrial boiler systems. Explain boiler construction and components, how to prevent common failure modes, combustion and system requirements, flame safeguards and schematic wiring diagrams, how to achieve peak efficiencies, boiler safety, preventive maintenance to counteract some boiler deterioration, advanced troubleshooting, and learn safe efficient operation of commercial and industrial boilers.

CLIN: 1016 Annual Recurrences # Attendees

2018 NFPA 1 Fire Code Overview 3-Day Option Year 1 Only 12

Provide a period of instruction covering the following:

Recognize the limitations and extent of the codes related to Fire Protection Systems.

Recognize the classifications of work associated with Fire Protections Systems.

Identify Fire Protection Systems that need to be upgraded.

Identify and recognize hazards using Fire Code to mitigate and manage hazards.

This period of instruction will introduce critical concepts of the most current version of the NFPA 1 – Fire Code. It will provide a basis for the correct use and application code. It will build an understanding of the intent of the code through detailed basic tables, categorizations, and a case study.

NFPA 1 Fire Code (current edition).

NFPA 1 Fire Code Hand Book, minimum three copies.

2.1 Period of Performance.

The Period of Performance will be a base period from the date of contract award and two (2) options years.

2.2 Place of Performance.

Services under this contract will be performed on MCLB Albany, GA at a location to be designated via separate correspondence by the COR.

2.3 Notification of Training.

Government will give a minimum of 30 day’s notice prior to the required training date.

2.4 Contractor’s Unauthorized Work Performance. The Contractor shall not perform work that deviates from contract requirements and specifications. If the Contractor deviates from contract requirements and specifications without approval of the Contract Administrator and/or the Contracting Officer, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

SECTION 3

3.0 Contractor Furnished Items and Services.

3.1 General. The Contractor shall furnish the specific items listed below and everything else required to perform this contract.

3.2 Materials. The Contractor shall provide all electronic media, course materials, surveys, and necessary equipment to perform the services required by this contract. All of these items shall be available on the contract start date.

3.3 Responsibility. The Government will not be responsible in any way for the Contractor’s supplies, materials, personal equipment, or belongings brought into the buildings or on the grounds to perform repairs or services. This includes items lost or damaged by fire, theft, hurricane, accident, or other disaster.

3.4 Evaluation Requirements. The evaluation requirements are listed in the solicitation under FAR clause 52.212-

2 Evaluation of Commercial Items.

SECTION 4

4.0 Specific Tasks. The Contractor shall provide all the services, course materials, and course presentation materials outlined in Section 2 of the PWS. The quoted price should include cost for transportation and lodging expenses for the courses.

SECTION 5

5.0 Applicable Publications and Forms. The vendor is responsible for providing all publications and forms for the courses being provided.

SECTION 6

6.1 Role of Contracting Officer’s Representative for Inspection, Acceptance, and Other Duties.

6.1.1 Responsibilities. The COR performs surveillance and inspection of all presentations and course materials required under this contract; determines the adequacy of Contractor performance according to the specifications of this contract; acts as the Government’s representative at the work site; ensures compliance with contract; and advises the Contract Administrator of any factors which may cause delay in work performance. The COR cannot authorize deviations from contract specifications and requirements.