M25-010 Relocate Paint Booth Roof Install - Item Description.pdf
PDF 144 KB Posted
- Attached to
- Relocate Paint Booth Roof
- Solicitation number
- FA812625Q0007
About this file
This document is an Item Description that outlines the requirements for stainless steel ductwork to be purchased for a project titled "Relocate Paint Booth Roof" under Solicitation FA812625Q0007.
The key details are:
- The required ductwork includes 30-inch, 42-inch, and 44-inch diameter spiral ductwork, 90-degree elbows, hangers, and flanges, all made from 22-gauge 304 stainless steel
- A total of 120 feet of 30-inch ductwork, 30 feet of 42-inch ductwork, and 20 feet of 44-inch ductwork is required
- Additional components include 5 each 30-inch elbows, 12 hangers for the 30-inch ductwork, and 6 each 42-inch and 4 each 44-inch flanges
- 6 sheets of 60-inch by 120-inch 22-gauge 304 stainless steel sheet metal are also required
- The solicitation is being issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for the Relocate Paint Booth Roof project.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)
TINKER AIR FORCE BASE OKLAHOMA
Statement of Requirement / Item Description
76 MXSG is requesting the purchase of the following stainless steel 22gauge 304 duct work for project 22E008SM-1
30inch 22gauge ss 304 spiral ducting = 120feet
• Outside diameter of 30inch
• Material 22 gauge (thickness)
• Material type stainless steel 304ss
• Duct type round spiral
30inch 22gauge ss 90-degree elbow =5each
• Outside diameter of 30inch
• Material 22 gauge (thickness)
• Material type stainless steel 304ss
• Duct type round spiral.
• Elbow degree 90
42inch 22gauge ss 304 spiral ducting = 30feet
• Outside diameter of 42inch
• Material 22 gauge (thickness)
44inch 22gauge ss 304 spiral ducting = 20feet
• Outside diameter of 44inch
• Material 22 gauge (thickness)
30inch 22gauge saddle hangers = 12each
• For hanging 30inch 22gauge round spiral ducting
42inch 22gauge ss spiral flanges = 6each
• “42inch flange” mate with 42inch spiral duct “bolt together”
• Material 22 gauge (thickness)
44inch 22gauge ss spiral flanges = 4each
• “44inch flange” mate with 44inch spiral duct “bolt together”
• Material 22 gauge (thickness)
60inches x 120inches (5ft x 10ft) 22gauge 304ss sheet metal = 6each
• Width = 60inches
• Length = 120inches
• 22gauge (thickness)
• Material type = 304 stainless steel
File details come from the government source that posted it. Updated .