M0026319Q0007_Telephone_Computer_Supplies.pdf

SEE ADDENDUM

(No Collect Calls)

M0026319Q0007 11-Dec-2018

b. TELEPHONE NUMBER

(843)228-2703

8. OFFER DUE DATE/LOCAL TIME

11:00 AM 18 Dec 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M002639. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

RANDY L. WENTWORTH

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M3200019SUDV007

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

REGIONAL CONTRACTING OFFICE

ATTN: RANDY WENTWORTH

PO BOX 5069 MCRD\ERR

843-228-2703

PARRIS ISLAND SC 29905-5069

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M00263 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

MCRD PARRIS ISLAND

MANNIE SMART

BLDG 500A

ALASKA ST.

PARRIS ISLAND SC 29905

TEL: 843-228-2632 FAX:

843-228-2163FAX:

TEL: 843-228-2703

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

334210

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF45

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M0026319Q0007

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 5,000 Feet and

Decimal

OUTDOOR STRANDED LOOSE CABLE FIBER 24

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

ADDITIONAL MARKINGS: Attn: GySgt Rivera G6 - 843-228-1483

PSC CD: 5805

NET AMT

0002 5,000 Feet and

Decimal

OUTDOOR STRANDED LOOSE CABLE FIBER 12

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0003 10 Each Stainless Shell Splice Case Kit 28.4

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0004 10 Each Stainless Shell Splice Case Kit 22

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0005 1 Each Field-Installable Connector Tool Kit

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0006 40 Each Copper Patch Cord, Category 6, Blue UTP

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0007 6 Pack

(PAK)

Cable Tie, 30lb. 5.9 inch PA66 Black

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0008 12 Pack

Standard Cable Tie, 8" Long, 50lb

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0009 50 Pack

Write-on Self-laminating Tag

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

0010 1 Each Cable Analyzer

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0011 10 Each S66, 1-Pair Test Adapter, USOC

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0012 40 Each Copper Patch Cord, Cat 6, Blue UTP Cable

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0013 30 Each CAT 6, Sm Dia 28 AWG UTP Patch Cable

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0014 30 Roll Electrical Tape, General Purpose Grade

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0015 6 Each Punchdown Patch Panel Kit, Category 6

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0016 25 Each Closet Connector Housing (CCH) Panel

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0017 10 Each Rack Mount Fiber Enclosure, Open Access

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0018 48 Each Buffer Tube Fan-Out Kit, indoor

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0019 5 Pack

Heat-Shrink Fusion Splice Protectors

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0020 12 Each Fiber Splice Organizer Tray

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0021 15 Each Fiber Optic Splice Closure

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0022 10 Each Stainless Shell Splice Case Kit

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

0023 1 Each Pipe/Cable Locator

FFP

See section C Item listing for salient characteristics.

FOB: Destination

MILSTRIP: M3200019SUDV007

PURCHASE REQUEST NUMBER: M3200019SUDV007

Section C - Descriptions and Specifications

SALIENT CHARACTERISTICS

CLIN 0001 - Single Jacket AllDielectric, GelFree, Outdoor Stranded Loose Tube Cable Minimum Bend Radius, loaded 15.3 cm | 6.0 in

Minimum Bend Radius, unloaded 10.2 cm | 4.0 in

Tensile Load, long term, maximum 180 lbf | 800 N

Tensile Load, short term, maximum 2700 N | 607 lbf

Vertical Rise, maximum 1247.0 m | 4091.2 ft

General Specifications

Cable Type Stranded loose tube

Construction Type Nonarmored

Subunit Type Gelfree

Construction Materials

Fiber Type Solution TeraSPEED®, zero water peak singlemode fiber (G.652.D, G.657.A1 | OS2)

Jacket Material PE

Total Fiber Count 24

Fiber Type TeraSPEED®, zero water peak singlemode fiber (G.652.D, G.657.A1 | OS2)

Fiber Type, quantity 24

Fibers per Subunit, quantity 12

Jacket Color Black

Jacket UV Resistance UV stabilized

Dimensions

Buffer Tube/Subunit Diameter 2.50 mm | 0.10 in

Cable Weight 66.0 kg/km | 44.0 lb/kft

Diameter Over Jacket 10.20 mm | 0.40 in

Filler, quantity 3

Subunit, quantity 2

CLIN 0002 - Single Jacket AllDielectric, GelFree, Outdoor Stranded Loose Tube Cable Minimum Bend Radius, loaded 15.3 cm | 6.0 in

Minimum Bend Radius, unloaded 10.2 cm | 4.0 in

Tensile Load, long term, maximum 180 lbf | 800 N

Tensile Load, short term, maximum 2700 N | 607 lbf

Vertical Rise, maximum 1247.0 m | 4091.2 ft

General Specifications

Cable Type Stranded loose tube

Construction Type Nonarmored

Subunit Type Gelfree

Construction Materials

Fiber Type Solution TeraSPEED®, zero water peak singlemode fiber (G.652.D, G.657.A1 | OS2)

Jacket Material PE

Total Fiber Count 12

Fiber Type TeraSPEED®, zero water peak singlemode fiber (G.652.D, G.657.A1 | OS2)

Fiber Type, quantity 12

Fibers per Subunit, quantity 12

Jacket Color Black

Jacket UV Resistance UV stabilized

Dimensions

Buffer Tube/Subunit Diameter 2.50 mm | 0.10 in

Cable Weight 66.0 kg/km | 44.0 lb/kft

Diameter Over Jacket 10.20 mm | 0.40 in

Filler, quantity 4

Subunit, quantity 1

CLIN 0003 - Stainless Shell Splice Case Kit with Drillable End Plates - 6.5" x 28.4"

- airtight, watertight seal around most types of cable, including lead or plastic jacketed, single or double systems, through-cable systems, preco nnected and pressurized or nonpressurized systems. Closure remains secure in overhead and underground applications, in hot, dry, warm, wet or cold environments.

- The LOCKBAR fastener system features front and back bars that fit into the splice case flan ge. - The back bar has factory-assembly nuts and bolts attached, which mate up with the keyholes in the front bar. Splice case shells are stainless steel with an inner liner of neoprene. Fasteners are also stainless steel. End plates are made from hard plastic and filled with a rigid polyurethane foam. Insulated torque bars keep the end plates secure and in alignment during installation and re-entry.

- Inside diameter (in.): 6.5

- OA Length (in.): 28.4

- Max. number of pairs 26-24-22: 1,100

CLIN 0004 - Stainless Shell Splice Case Kit with Drillable End Plates -6.5" x 22"

- airtight, watertight seal around most types of cable, including lead or plastic jacketed, single or double systems, through-cable systems, preco nnected and pressurized or nonpressurized systems. Closure remains secure in overhead and underground applications, in hot, dry, warm, wet or cold environments.

- The LOCKBAR fastener system features front and back bars that fit into the splice case flan ge. - The back bar has factory-assembly nuts and bolts attached, which mate up with the keyholes in the front bar. Splice case shells are stainless steel with an inner liner of neoprene. Fasteners are also stainless steel. End plates are made from hard plastic and filled with a rigid polyurethane foam. Insulated torque bars keep the end plates secure and in alignment during installation and re-entry.

- Inside diameter (in.): 6.5

- OA Length (in.): 22

- Max. number of pairs 26-24-22: 1,100

CLIN 0005 - Field-Installable Connector Tool Kit Flat Cleaver

Specifications

Product Type

Connector Tools and Tool Kits

Technology

No-Epoxy/No-Polish

Compatibility

LC, SC and ST® Compatible

Dimensions (HxWxD)

25 cm x 35 cm x 9 cm (10 in x 14 in x 3.5 in)

Weight

2.5 kg (5.5 lb)

RoHS

Free of hazardous substances according to RoHS 2002/95/EG

Ordering Information

Part Number

- Includes OptiSnap® Installation Tool, flat fiber cleaver, VFL adapter in 1.25 mm, crimp tool, gauge card, fiber preparation tools, fiber cleaning tools

CLIN 0006 - Copper Patch Cord, Category 6, Blue UTP Cable, 10 FT

Category CATEGORY 6

Color BLUE

Connector Type RJ45 TO RJ45

Lengths 10 FT. | 3.05 M

Shielded U/UTP - UNSHIELDED TWISTED PAIR

Type PATCH CORDS

CLIN 0007 - Cable Tie, 30lb. 5.9", Max Bun Diameter 1.38" PA66, Black, 1000/Pkg

CLIN 0008 - Standard Cable Tie, 8" Long, 50lb Tensile Strength, PA66, Black, 100/pkg

CLIN 0009 - Caution Write-On Self-Laminating Tag, Telephone Cable, 3.5" x 2.0", Yellow

- Clear laminating plastic flap permanently protects the writing and data marked on the tag.

- Mounting holes for easy mounting using standard cable ties.

- Markers can be mounted in any direction, either vertically, horizontally, as a wraparound identification plate or as a flag for the best visual position on the cable assembly.

CLIN 0010 – Cable Analyzer Kit Contains: 1 Mainframe & Remote, (2) CableAnalyzer Modules, Set of Cat 8/Class I Permanent Link Adapters, Set of Cat 8/Class I Channel Adapters, (2) Headsets, (2) HandStrap, (2) Shoulder Straps, Carry Case, USB Interface

Cable, Versiv Open Source Software CD, (2) AC Char gers, (2) Universal Couplers, (2) Terminators, WiFi Adapter, Statement of Calibration and Getting Started Guide.

Unique features:

- enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. With RJ 45 Link adapters

- Enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process

- remotely set up the testers, monitor job progress and even locate tester from any smart device

- user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels

- management software provides unmatched analysis of test results and professional test reports

- dedicated diagnostics, a simple test that locates the problem

Performance:

- Eight second Cat 6A test time contributes to the fastest way to gain certification

- Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting

- Manage up to 12,000 Cat 6A test results with full graphics

- Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters

- Over 1 billion links reported on PC management software

- Integrated Wi-Fi allows you to easily upload results to

Standards:

- Compliant with ANSI/TIA-1152-A Level 2G and proposed standard IEC 61935-1 Ed. 5 Level VI field tester accuracy requirements to 2000 MHz

- Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) – IEEE

802.3bt, ANSI/TIA/EIA-568, ISO/IEC 11801 series documents

- TCL and ELTCTL measurements compliant to IEC 61935-1-1 (Draft) Screen continuity along path of cabling

CLIN 0011 - S66, 1-Pair Test Adapter, USOC TESTAR-2 ....................1-pair, 6-position, USOC wiring two 4-pair outlets plus a 150mm (6 in.) modular cord terminated with our patented 4-pair “universal” plug for accessing any standard 6- or 8-position jack.

CLIN 0012 - Copper Patch Cord, Category 6, Blue UTP Cable, 7 FT.

Color BLUE

Connector Type RJ45 TO RJ45

Lengths 7 FT. | 2.13 M

CLIN 0013 - CAT 6, Small Diameter 28 AWG UTP Patch Cords, 3 FT, GRAY

Color GREY

Connector Type RJ45 TO RJ45

Lengths 3 FT. | 0.91 M

CLIN 0014 - Electrical Tape, General Purpose Grade, 60’ Length x 3/4" Width x 7 Mil

Thk, 17 Inch-Lb. Breaking Strength, Polyvinyl Chloride Backing, Rubber Resin Adhesive, Black Color

CLIN 0015 - Punchdown Patch Panel Kit, Category 6, Flat, 48 Port, 2RU 48-port, Category 6, patch panel with 48 RJ45, 8-position, 8-wire ports. Label kit (DPLK48) and strain relief bar

(SRB19BL) included. Cable strain relief bar extends 2" off of the rack to support cables in punchdown patch panel applications.

CLIN 0016 - Closet Connector Housing (CCH) Panel, ST Compatible adapters, Simplex, UPC, 12 fiber, Single-mode (OS2)

Connector Type ST-COMPATIBLE

Enclosure Type LANSCAPE(CCH/WCH)

Fiber Count 12

Fiber Category Single-Mode (OS2)

Connector Polish UPC

Adapter Housing Color Blue

Adapter Housing Material Metal

Adapter Style Standard

Insert Material Ceramic

CLIN 0017 - Rack Mount Fiber Enclosure, Open Access 1 RU Open access version of FCE1U enclosure. Holds up to four QuickNet(TM) Cassettes, FAP adapter panels, or FOSM splice modules. Dimensions: 1.73"H x 17.60"W x 16.30"D (43.9mm x 447.0mm x 414.0mm)

Connectorized Fibers 96

Spliced Fibers 96

CLIN 0018 - Buffer Tube Fan-Out Kit, indoor, 12 fiber, 25-in legs Environment Indoor

Fanout Type Buffer Tube

Product Type Fan-Out Kits

Cable Type Cable with 250 μm fiber

Fiber Count 12

Fan-Out Tubing Color Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua

Furcation Length 44.5 mm (1.75 in)

Tubing Length 635 mm (25 in)

Tubing Outer Diameter 0.9 mm

CLIN 0019 - Heat-Shrink Fusion Splice Protectors, Single Fiber, 40mm L, 50 Pc

Length 40 mm

Product Description Heat-Shrink Fusion Splice Protector Parts, single-fiber, 40 mm long (package of 50)

CLIN 0020 - Fiber Splice Organizer Tray Accommodates up to 24 single fusion or 144 mass fusion splices and has entry from all corners. The single fusion splice inserts accommodate the Fiber Optic Splice Sleeve 2170 or equivalent 3.0 mm x 60 mm heat shrink sleeve.

14" (355 mm) x 4.6" (116 mm) x Height: 0.5" (13 mm)

Kit Contents

a. Splice tray

b. Cover

c. Log label

d. 6" (150 mm) ribbon retention strip

e. Cable ties (12)

f. Adhesive-backed single fusion splice holder (2), adhesive-backed mass fusion or 3M™ Fibrlok™ Splice Holder (2)

g. 6" 3M™ Scotchmate™ Hook-and-Loop

Reclosable Fastener SJ3527

h. Fiber saddle clips (3)

CLIN 0021 - Fiber Optic Splice Closure No special tools required (standard torque wrench)

Constructed of a highly chemical-resistant material

Can be deployed in most applications: buried, underground and aerial

Gasket seals Reusable for easy re-entry

Unique strength member clamp assembly that prevents cable sheath movement with temperature changes

Spacious fiber management areas All closures provide separate areas for routing, protecting, and expressing buffer tubes and ribbon fibers

Flexible drop or cable addition Multiport grommets provide entry for drops or cables

Flame-retardant materials All 2178 closures are available in a flame-retardant model, giving you even more application choices

Flame Retardant Material: UL-94V-0

The maximum single fusion and mass fusion splice capacity for the closure is 96 and 432, respectively.

Cable Entry Ports per Splicing Configuration:

Butt

Main: 2

Branch: 2

Inline

Main: 2

Branch: 6

Size: 1.0"

CLIN 0022 - Stainless Shell Splice Case Kit with Drillable End Plates - 4.0" x 25.8"

- effectively maintain an airtight, watertight seal around most types of cable, including lead or plastic jacketed, single or double systems, through-cable systems, preconnected and pressurized or nonpressurized systems.

-Closure remains secure in overhead and underground applications, in hot, dry, warm, wet or cold environments.

- The LOCKBAR fastener system features front and back bars that fit into the splice case flange. The back bar has factory-assembly nuts and bolts attached, which mate up with the keyholes in the front bar. Splice case shells are stainless steel with an inner liner of neoprene.

- Fasteners are also stainless steel. End plates are made from hard p lastic and filled with a rigid polyurethane foam.

Insulated torque bars keep the end plates secure and in alignment during installation and re-entry.

CLIN 0023 - Pipe/Cable Locator Six active trace frequencies which can be used individually or simultaneously to providing a solution for virtually all challenging applications encountered in the field. The receiver incorporates passive power and auxiliary frequencies that do not require the use of the transmitter.

Trace view mapping interface that provides an intuitive mapping display showing the utility path combined with a precision peak antenna based antenna array to provide the utmost confidence in utility location.

Five modes of operation - trace view, directional peak, directional null, special peak and induction peak -for accurate locates, even in congested areas.

Directional mode utilizes all-peak antenna design for improved left/right guidance and accurate locates in challenging conditions.

Compatibility with select GPS/GIS field mapping instruments for real time mapping of electronic markers or pipe and cable facilities

Section D - Packaging and Marking

CLAUSES INCORPORATED BY FULL TEXT

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200

(ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical

Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

http://www.aimglobal.org/?Reg_Authority15459

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

..........N/A

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

............N/A

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the

Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with

ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data

Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with

ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-

130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

http://dodprocurementtoolbox.com/site/uidregistry/

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph

(g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause) http://dodprocurementtoolbox.com/site/uidregistry/

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

0012 Destination Government Destination Government

0013 Destination Government Destination Government

0014 Destination Government Destination Government

0015 Destination Government Destination Government

0016 Destination Government Destination Government

0017 Destination Government Destination Government

0018 Destination Government Destination Government

0019 Destination Government Destination Government

0020 Destination Government Destination Government

0021 Destination Government Destination Government

0022 Destination Government Destination Government

0023 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 45 dys. ADC 5,000 MCRD PARRIS ISLAND

MANNIE SMART

BLDG 500A

ALASKA ST.

PARRIS ISLAND SC 29905

843-228-2632

FOB: Destination

M00263

0002 45 dys. ADC 5,000 (SAME AS PREVIOUS LOCATION)

0003 45 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0004 45 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0005 45 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0006 45 dys. ADC 40 (SAME AS PREVIOUS LOCATION)

0007 45 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0008 45 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0009 45 dys. ADC 50 (SAME AS PREVIOUS LOCATION)

0010 45 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0011 45 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0012 45 dys. ADC 40 (SAME AS PREVIOUS LOCATION)

0013 45 dys. ADC 30 (SAME AS PREVIOUS LOCATION)

0014 45 dys. ADC 30 (SAME AS PREVIOUS LOCATION)

0015 45 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0016 45 dys. ADC 25 (SAME AS PREVIOUS LOCATION)

0017 45 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0018 45 dys. ADC 48 (SAME AS PREVIOUS LOCATION)

0019 45 dys. ADC 5 (SAME AS PREVIOUS LOCATION)

0020 45 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0021 45 dys. ADC 15 (SAME AS PREVIOUS LOCATION)

0022 45 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0023 45 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

52.247-34 F.O.B. Destination NOV 1991

Section G - Contract Administration Data

CONTRACT ADMINISTRATION

G-1.1 Most contract administration functions shall be retained by the Regional Contracting

Office, Marine Corps Recruit Depot, Parris Island, South Carolina. Any inquiries pertaining to the administration of performance of this contract should be directed to the Regional Contracting

Office.

G-1.2 Invoices and receiving documents shall be submitted through Wide Area Workflow

(WAWF) for payment in accordance with DFARS 252.232-7006.

G-2 Contract Correspondence and Inquiries

G-2.1 All correspondence/inquiries shall reference the appropriate Contract Number, and shall be submitted to the email points of contact address:

Regional Contracting Office, Parris Island

Marine Corps Recruit Depot

Attn: Randy Wentworth

Contract Specialist

Parris Island, SC 29905

Phone: 843-228-2703

E-mail: randy.wentworth@usmc.mil

Regional Contracting Office, Parris Island

Marine Corps Recruit Depot

Attn: William Russell

Contracting Officer

Parris Island, SC 29905

Phone: 843-228-2407

E-mail: william.a.russell@usmc.mil

G-3 Technical Inquiries

G-3.1 Upon contract award, all inquiries that relate to technical issues shall be directed to the contracting office.

G-4 Authority of Government Personnel

G-4.1 Notwithstanding any provisions to the contrary contained elsewhere in this solicitation, the

Contracting Officer is the only person authorized to approve and issue amendments to this solicitation.

G-4.2 The Contracting Officer is the only person who can legally modify any resulting contract or obligate the Government for the expenditure of public funds. Costs shall not be incurred by recipients of the solicitation in anticipation of receiving direct reimbursement from the

Government.

mailto:randy.wentworth@usmc.mil mailto:william.a.russell@usmc.mil

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area

WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training

Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data

Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

COMBO

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in

WAWF, as specified by the contracting officer.

DESTINATION/DESTINATION

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC M67443

Issue By DoDAAC M00263

Admin DoDAAC M00263

Inspect By DoDAAC M00263

Ship To Code M00263

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send

Additional Email Notifications” field of WAWF once a document is submitted in the system.

Mannie.smart@usmc.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Randy.wentworth@usmc.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

mailto:Mannie.smart@usmc.mil mailto:Randy.wentworth@usmc.mil

Section I - Contract Clauses

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-13 System for Award Management Maintenance OCT 2018

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other

Covered Entities.

JUL 2018

52.211-17 Delivery of Excess Quantities SEP 1989

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.227-14 Rights in Data--General MAY 2014

52.228-5 Insurance - Work On A Government Installation JAN 1997

52.232-23 Assignment Of Claims MAY 2014

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7048 Export-Controlled Items JUN 2013

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.247-7023 Transportation of Supplies by Sea APR 2014

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (OCT 2018)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995)

(41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

_X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

_X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41

U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014)

(if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

_X___ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015)…