LTC PID Packaging Consolidated Text.docx

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 6650007043549

PERISCOPE M17

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

Unit of issue is EA with EA = to 1 item.

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CQC30

FIRST ARTICLE TEST INFORMATION DUEL FIRST ARTICLE TEST: NO CONTRACTOR

FIRST ARTICLE TEST(FAT)-PER FAR 52.209-3 NUMBER OF UNITS TO BE TESTED:

3 EACH DAYS REQUIRED TO SUBMIT FAT REPORT: 90 DAYS (NOTE: THE DELIVERY

SCHEDULE ON THE FACE OF THE SOLICITATION REFLECTS ONLY THE TIME TO

DELIVER THE SUPPLIES.),,,, DAYS FOR GOVERNMENT REVIEW: 30 DAYS WAIVED

SOURCES: OPTEX SYSTEMS INC., TX (0BK64) DISPOSITION OF TEST UNIT (PER

DLAD 52.509-9017): RETAINED BY CONTRACTOR SUBMIT FATR TO: GOVERNMENT

REPRESENTATIVE AND POST-AWARD CONTRACTING OFFICER SURFACE QUALITY

STANDARDS REQUIRED FOR ACCEPTANCE TESTING. CONTRACTORS WITHOUT STANDARDS

MUST CONTACT THE CONTRACTING OFFICER FOR INSTRUCTIONS TO RECEIVE

STANDARDS OR TO HAVE ALTERNATE ACCEPTANCE METHOD APPROVED. ENGINEERING

EXCEPTIONS DATA: Add Distribution Statement 'C' to all drawings and associated documents without a Distribution Statement. Distribution Statement C: Distribution authorized to Department of Defense and U.S.

DoD contractors only (Administrative and Operational Use; Export Controlled), date of determination 1 August 2013. Other requests for this document shall be referred to PD MBTS Security Manager at: Program Executive Office Ground Combat Systems (PEO GCS), ATTN: SFAE#GCS#M, 6501 East Eleven Mile Road, Warren, MI 48397#5000. Destruction Notice:

Destroy by any method that will prevent the disclosure of contents or reconstruction of the document. WARNING "This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25." DWG: 7674952,:

P-L-391 SHOULD BE L-P-391: SPEC: L-P-391 REPLACED BY ASTM D4802.

PD7043549: CHANGE PACKING METHOD TO: MIL-STD-2073-1, METHOD 41 CLEAN AND

DRY IN ACCORDANCE WITH MIL-STD-2073-1 MIL-O-16898 IS APPLICABLE FOR THIS

ITEM. Per 339, ESA approved RFV# 0006-V-002 & Procuring Activity Number H16T8007, Adhesive RTV123 is a good substitute for Adhesive per 9356129 (Dow Corning P/N Q3-6093 & General Electric P/N SAE210). END ENGINEERING

EXCEPTIONS

REFERENCE NUMBER:ZD003

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 7043549

REVISION NR H DTD 07/30/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7680606

REVISION NR AB DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 10940477

REVISION NR E DTD 11/21/2012

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(2)

REVISION NR R DTD 09/27/2019

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-130N(1) NOT 1

REVISION NR N DTD 08/26/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9356129

REVISION NR A DTD 07/19/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043540

REVISION NR F DTD 09/07/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043539

REVISION NR F DTD 01/25/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043541

REVISION NR B DTD 08/23/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043541

REVISION NR DTD 11/02/1951

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043543

REVISION NR E DTD 08/10/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043543

REVISION NR DTD 12/09/1954

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7048694

REVISION NR K DTD 01/09/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7674952

REVISION NR E DTD 08/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043541

REVISION NR A DTD 02/11/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043549

REVISION NR K DTD 04/07/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7641866

REVISION NR V DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043541

REVISION NR A DTD 02/11/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043549

REVISION NR DTD 04/01/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7043539

REVISION NR F DTD 01/25/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7680600

REVISION NR J DTD 03/19/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10940477

REVISION NR G DTD 05/02/2018

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Packaging shall be IAW SPI AM7043549.

NSN: 6650013205628

PERISCOPE, ARMORED VEHICLE

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD064

EXCEPTIONS TO DATA:

TDPL:

DOCUMENT DELETE

H3T2078 SH022,SH023,SH024

H3T2080 SH071,SH072

END EXCEPTIONS

SURFACE QUALITY STANDARDS APPLY

APPROVAL OF SURFACE QUALITY STANDARDS REQUIRED PRIOR TO FAT

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12357848

REVISION NR D DTD 05/05/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12322230

REVISION NR J DTD 02/19/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357797

REVISION NR E DTD 11/27/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7680606

REVISION NR AB DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12322178

REVISION NR D DTD 12/12/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12322514

REVISION NR B DTD 10/27/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12322177

REVISION NR D DTD 10/09/1984

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12322177

REVISION NR B DTD 08/25/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12344344

REVISION NR K DTD 05/25/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 7641866

REVISION NR V DTD 04/19/2017

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(1)

REVISION NR R DTD 05/24/2018

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-130N(1)

REVISION NR N DTD 11/16/2012

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM20700

REVISION NR DTD 11/01/1999

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM35751

REVISION NR 2 DTD 03/31/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285079

REVISION NR G DTD 08/24/1996

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12285078

REVISION NR E DTD 08/25/1983

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12285079

REVISION NR C DTD 01/17/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357848

REVISION NR DTD 11/29/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285071

REVISION NR R DTD 03/08/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285072

REVISION NR L DTD 07/28/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285078

REVISION NR G DTD 12/12/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285081

REVISION NR G DTD 12/12/1997

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12285081

REVISION NR D DTD 12/07/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12285103

REVISION NR F DTD 08/27/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12316159

REVISION NR G DTD 01/29/2013

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12357797

REVISION NR C DTD 01/11/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357847

REVISION NR B DTD 11/24/1997

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12357848

REVISION NR A DTD 07/21/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357948

REVISION NR A DTD 04/02/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 GDLU6191

REVISION NR DTD 02/20/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 GDLR8199

REVISION NR DTD 12/07/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357848

REVISION NR D DTD 04/10/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12357848

REVISION NR DTD 06/15/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-16188

REVISION NR DTD 08/05/2016

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:05 -05 Delicate instrument

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO OR COME IN DIRECT

CONTACT WITH ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER CQC30

HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT

(GOVERNMENT SPECIFICATION) (APR 1984)

- FAR 52.246-11

(A) DEFINITION. "CONTRACT DATE," AS USED IN THIS

CLAUSE, MEANS THE DATE SET FOR BID OPENING OR,

IF THIS IS A NEGOTIATED CONTRACT OR A

MODIFICATION, THE EFFECTIVE DATE OF THIS

CONTRACT OR MODIFICATION.

(B) THE CONTRACTOR SHALL IN EFFECT ON THE

CONTRACT DATE, COMPLY WITH THE INTERNATIONAL

ORGANIZATION FOR STANDARDIZATION (ISO) 9001

STANDARD.

REFERENCE NUMBER ZD003

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY