LASER ENGRAVER SPECIFICATIONS.pdf
PDF 147 KB Posted
- Attached to
- Laser Engraver Federal contract opportunity
- Solicitation number
- W912GY-23-Q-0009
About this file
This document provides specifications for a laser engraver procurement. The specifications call for an engraver capable of engraving, marking, and cutting a wide variety of materials including metals, ceramics, glass, leather, paper, plastics, rubber, wood, and textiles. Key requirements include an autofocus feature, laser pointer, ferro-magnetic work table, precision lens, floor stand, maximum speed of 140 inches per second, and positional and repeatability accuracy. The engraver must come with JobControl software, warranty, and protection packages. Relatedly, the federal contract opportunity is a pre-solicitation from the Department of the Army to procure a laser engraver under solicitation number W912GY-23-Q-0009.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sources Sought Laser Engraver Questionnaire.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LASER ENGRAVER SPECIFICATIONS
(PN 179063)1 Laser Engraver requirements:
• Autofocus
• Laser pointer
• Ferro-magnetic working table
• 2.85” precision lens
• Floor stand
• OptiMotionTM for maximum cutting speeds
• JobControl Software Packages
• InPack TechnologyTM Protection Package
• 24 month warranty (subject to warranty conditions)
• Engraving Area- 29” x 17”
• Maximum Raster Speed- 140”/sec
• Positional Accuracy- 5μm/per inch of travel
• Repeatability- +/- 15μm
• TESA Labels- Tesa laser label code source Part# 06973-00004-06
• Laser Source- CO2 80W / Fiber 50W
• Standard Focal Length Lens- 2.85”
• Max. Part Height (with 2.85” lens) - 7.3”
• InPack Technology- Standard
• Gantry Motor Type- Brushless Servo Motors
• Engraving Table- Ferro-Magnetic with inch rulers
• Auto Focus- Standard
• Red Dot Pointer- Standard
• Air Assist Plumbing (compressor not included as standard)- Standard
• Print Software- JobControl
• Input Voltage/Amperage- 60-80W – 115V/20A 120W – 230V/20A
• SOFTWARE NEEDED: Bartender 2019 and Job Control 11.4.0 or equivalent.
• Engraver shall be capable of engraving the following:
Aluminum
Anodized aluminum
Thin metal foils
Brass
Polished brass
Chromate
Copper
Polished copper
Gold
Tesa Laser Labels
High-speed steel
Silver
1 Part number 179063 is provided for reference only and will be reviewed as exact, equal and like items.
Stainless steel brushed
Stainless steel polished
Ceramics
Food
Glass
Leather
Mirror
Paper
Plastics
Rubber
Stone
Wood
Textiles
• Engraver shall be capable of marking the following:
Thin metal foils, Chromate, Hard metal, High-speed steel, Stainless steel brushed, Tesa Laser Labels, Stainless steel polished, Titanium and Ceramics.
Engraver shall be capable of cutting the following:
Thin metal foils, Leather, paper, plastic, Tesa Laser labels, rubber, wood and textiles.
File details come from the government source that posted it. Updated .