Laser Cutter_Engraver SOW (002)_Redacted.pdf
PDF 71 KB Posted
- Attached to
- Laser Cutter/Engraver
- Solicitation number
- FA252125QB059
About this file
This Statement of Work (SOW) details the requirements for a 155w CO2 Laser Cutter/Engraver for the Department of the Air Force Space Command. The required equipment must include servo motor motion control, a rotary 4th axis with 3-jaw clamping, fume extraction system, 110v power compatibility, comprehensive laser control software with at least three license seats, X&Y pass-through, and a minimum work area of 24"x36"x7". The system is intended for cutting and engraving thin stainless and mild steels, as well as organic and polymer materials.
The SOW specifies delivery within 120 days after contract award, with delivery permitted between 8:00 AM and 5:00 PM, Monday through Friday, excluding federal holidays. The contractor is responsible for one year of maintenance at their own expense and must comply with PSFB and OSHA safety standards. Delivery personnel must be U.S. citizens with clean criminal records, and must provide vehicle documentation for base access. The solicitation is currently in pre-solicitation status under the number FA252125QB059, targeting commercial CNC laser cutting and engraving equipment for specialized manufacturing processes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought CO Sign.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Laser Cutter/Engraver
STATEMENT OF WORK (SOW)
12 February 2025
1.0 DESCRIPTION OF SERVICES
Vendor shall provide a 155w CO2 Laser Cutter/engraver with the following items:
a. Servo motor motion control
b. Rotary 4th axis with 3-jaw clamping
c. Fume extraction system to allow indoor operation
d. Must run off 110v common A/C power
e. Laser control software must perform layout, path editing, motion control, power control, and at least three license seats
f. X&Y Pass-through
g. Minimum work area of 24”x36”x7” work area
h. Backup gas system for cutting operations
1.2 Maintenance Requirements
Laser cutter/engraver shall be repaired or replaced by the Contractor for the first one (1) year of ownership, at Contractor’s expense.
1.3 Period of Performance
Laser cutter/engraver shall be delivered 120 days after contract is awarded.
1.4 Place of Performance
2.0 POINT OF CONTACT
The point of contact for delivery is
3.0 WORK HOURS
Delivery may be completed between the hours of 8:00 AM and 5:00 PM, Monday through
Friday, excluding federal holidays. Any work performed outside of aforementioned work hours must be approved by the cognizant Contracting Officer.
4.0 GOVERNMENT FURNISHED PROPERTY (GFP) AND SERVICES
The Government will not provide any property or services for the contractor other than the address identified for delivery and unloading support. The laser cutter/engraver will remain under secure control by the Government during the period of performance identified in this
SOW.
5.0 BASE ACCESS
Delivery personnel are required to be a citizen of the United States and be free of any felony records. Proof of current vehicle registration, driver’s license and vehicle insurance must be made available prior to issuance of base access permits. The delivery contractor shall obtain base access for all personnel, subcontractors, vehicles and equipment.
6.0 REGULATIONS AND STANDARDS
The delivery contractor shall comply with all PSFB safety standards and all Occupational Safety, Health Act Safety and Health Standards (OSHA) standards. Resolution of citations for violations of OSHA is the contractor’s responsibility. The delivery contractor shall be responsible for supervision of all contract personnel and performance of all Contractor related functions.
7.0 NO SMOKING POLICY
There is an Air Force Policy of NO SMOKING in any Government building or vehicle in accordance with AFI 48-104 (11 Jul 2019) Tobacco Free Living.
File details come from the government source that posted it. Updated .