King Node Production Drawings Distro A.pdf

This is a technical engineering drawing document for a King Node Enclosure system, prepared for the Naval Air Warfare Center Weapons Division.

The document comprises detailed mechanical drawings and specifications for an electronic enclosure assembly containing multiple components: a main King Node Enclosure (drawing TS20159-1, shown on sheets 1-2), a Rear Cover (drawing TS20159-2), an LCD Cover (drawing TS20159-3), and a Status Panel (drawing TS20160). The drawings provide comprehensive dimensional specifications, hole placements, surface finish requirements, and assembly details across multiple views and cross-sections. Key specifications include precise measurements in inches for overall enclosure dimensions (approximately 4.625 x 5.125 inches), various hole sizes ranging from 0.070 to 0.391 inches in diameter with specific thread specifications (10-32 UNF, 8-32 UNC), radius specifications (R.003 to R.438), and material callouts indicating 0.23-inch nominal sheet material is acceptable. The drawings specify that parts must be free of major toolmarks, feature glossy/clear finishes on flat faces for visibility of internal text and LCD displays, and include symmetric hole patterns about centerlines unless otherwise noted. All drawings are marked "Distribution A: Approved for Public Release; Distribution is Unlimited" and reference the Naval Air Warfare Center Weapons Division as the originating organization. The document serves as the technical specification and manufacturing blueprint for this military electronic equipment enclosure system.