JUSTIFICATION FOR SOLE SOURCE.pdf

JUSTIFICATION FOR SOLE SOURCE ($15K-$350K)

Ref: FAR 13.106-1(b)

The service or material listed on (Document number)6080-0220 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below.

There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: ZEOCHEM LLC

Manufacturer POC & Phone Number: 800-424-9300

Mfr. Address:

1360 S. 12TH STREET

LOUISVILLE, KY 40210

Manufacturers Dealer/Rep PACIFIC CONSOLIDATED INDUSTRIES (PCI)[CAGE 75906]

12201 MAGNOLIA AVENUE

RIVERSIDE, CA. 92503

[951]289-5229 POC FIORELLA SINNEMA <FSINNEMA@PCIGASES.COM>

CORPORATE URL- WWW.PCIGASES.COM

X Description of the item or service required, the estimated cost, and required delivery date.

SIEVE, NITROGEN ABSORPTION, ZEOCHEM NITROGEN LOADING DISSICANT [750 POUNDS]

PCI GASES P/N 582416-004

RDD 11NOV2026 [ARO 110 DAYS UPON AWARD]

X Specific characteristics of the material or service limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

THIS DESICANT IS FOR NITROGEN ABSORPTION THAT RESULTS IN OXYGEN CONCENTRATION FOR THE VSA

CHAMBER ASSEMBLY PART NUMBER 795844-001. THE CHAMBER IS USED IN A VSA MODULE – 300 LPM GOX

SYSTEM PART NUMBER 795562-001 ONLY THIS SPECIFIC NTIROGEN REMOVAL MEDIA IS AUTHORIZED FOR

USE IN THIS SYSTEM EXCLUSIVELY.

ALL CHEMICAL & MOLECULAR SPECIFICATIONS FOR THIS MEDIA AND THE OTHER COMPONENTS IT

INTERACTS WITH CONTAIN ENGINEERING DESIGN THAT IS SUBJECT TO PROPRIETARY PROPERTY AND

INTELLECTUAL COPY RIGHTS.

THIS IS A DIRECT REPLACEMENT OF AN APPROVED IN-SERVICE SYSTEM IN WHICH THEY MUST INTERFACE

WITH OTHER COMPONENTS NECESSARY FOR THE SYSTEM TO OPERATE AND FUNCTION SATISFACTORILY. ANY

CHANGE IN FORM, FIT OR FUNCTION WILL RESULT IN TOTAL SYSTEM FAILURE AND THE INTERFACE WITH

THE ASSOCIATED EQUIPMENT AND COMPONENTS.

X The requested material or service represents the minimum requirements of the

Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

X The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

X A patent, copyright, or proprietary data limits competition. The proprietary data is:

ORIGINAL EQUIPMENT MANUFACTURER'S EXCLUSIVE PROPRIETARY TECHNOLOGY AND PATENT HOLDINGS, AS

DIRECT REPLACEMENT COMPONENTS MUST BE COMPATIBLE WITH EXISTING NAVAL SYSTEMS AND CANNOT BE

SUBSTITUTED OR REPAIRED THROUGH ALTERNATIVE SOURCES.

X These are “direct replacements” parts/components for existing brand name equipment.

____Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT

TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT

THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

10/22/2026