JOTFOC_2123403B351PR5012.pdf
PDF 163 KB Posted
- Attached to
- ACTUATOR ASSEMBLY Federal contract opportunity
- Solicitation number
- 70Z08523Q30014B00
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 70Z08523Q30014B00 RFQ.docx | DOCX document | |
| 70Z08523Q30014B00 FAR CLAUSES.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PROJECT/TASK
NUMBER
CODE
CODE
CODEONE LEVEL ABOVE CONTRACTING OFFICER TELEPHONE NUMBER DATE
SIMPLIFIED ACQUISITION PROCEDURES (SAP)
JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (J&A)
SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT’S REQUIREMENT. STATEMENTS SUCH AS “ONLY KNOWN SOURCE” OR “ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE” ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:
PURCHASE REQUEST OR REQUISTION NUMBER ESTIMATED AMOUNT (OVER $3,000 BUT NOT
EXCEEDING $250,000)
BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE
UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED.
REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES
EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN
DEVELOPED OR ARE NOT AVAILABLE
PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE
ACQUISITIONS ARE REQUIRED
SIGNATURE AND TITLE OF CUSTOMER TELEPHONE NUMBER DATE
SIGNATURE OF CONTRACTING OFFICER TELEPHONE NUMBER DATE
Sheet1
| SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENTS REQUIREMENT STATEMENTS SUCH AS ONLY KNOWN SOURCE OR ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION: Kongsberg Maritime, Inc. |
| PURCHASE REQUEST OR REQUISTION NUMBER: 2123403B351PR5012 |
| PROJECTTASK NUMBER: |
| ESTIMATED AMOUNT OVER 3000 BUT NOT EXCEEDING 150000: 140,000.00 |
| BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE: Purchase of the following Kongsberg Maritime, Inc. part: Niin; Name; QTY |
01-572-6678; ACTUATOR ASSEMBLY; 01
Kongsberg Maritime, Inc. CAGE: 07309, Sole-Source
| UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED: This part is apart of the WMSL Steering System which are a critical control system for safe operation, machinery operating parameters, environmental regulations & assets longevity for the WMSL-418 class cutters. Breakdown of this system or its components will lead to major damage or unsafe operation of the cutter. The CG does not possess technical design data, tolerances, and other information needed to evaluate alternate parts for other sources. | |
| REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES: As cited in the Federal Logistics Information Service Program, Kongsberg Maritime, Inc. is the original equipment manufacturer. In accordance with Commandant Instruction 4130.6B COAST GUARD CONFIGURATION MANAGEMENT MANUAL, it is very important to maintain configuration. Performing maintenance and making repairs that are consistent to each requirement enables the Coast Guard to maintain configuration, increase efficiency and reduce costs. The fundamental purpose of configuration management is to ensure that these assets meet their requirements. These cutters are assets that are used to satisfy a need for the Coast Guard’s mission. The configuration of these high value assets specifically impact safety, security, performance, schedule, cost and the environment. This configuration information is paramount to making timely and effective decisions regarding mission execution, mission support, and financial stewardship, and it is therefore imperative that consistency be maintained between these critical assets, their documented configuration and the driving requirements. | |
| EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE: n accordance with FAR 6.302-1 Only one responsible source and no other supplies or services will satisfy agency requirements (2) When the supplies or services required by the agency are available from only one responsible source, or, for DoD, NASA, and the Coast Guard, from only one or a limited number of responsible sources, and no other type of supplies or services will satisfy agency requirements, full and open competition need not be provided for. (4) When the agency head has determined in accordance with the agency’s standardization program that only specified makes and models of technical equipment and parts will satisfy the agency’s needs for additional units or replacement items, and only one source is available. See Commandant Instruction 4130.6B COAST GUARD CONFIGURATION MANAGEMENT MANUAL. This item is a proprietary commercial item of the proposed contractor. The overhaul requirements, specifications and other technical data to this item were never purchased by the U.S. Coast Guard and therefore are controlled by and remain the sole property of Kongsberg Maritime, Inc. | |
| PROVIDE A STATEMENT OF ACTIONS IF ANY THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED: COR will continue to conduct market research with a focus on locating vendors that are able to meet requirements, however without technical data described above obtaining full and open competition will be difficult. The Coast Guard cannot require any vendor to release proprietary information. | |
| SIGNATURE AND TITLE OF CUSTOMER: | |
| CODE: | |
| TELEPHONE NUMBER: 410-786-6039 | |
| DATE: 01/12/2023 | |
| SIGNATURE OF CONTRACTING OFFICER: | |
| CODE_2: | |
| TELEPHONE NUMBER_2: | |
| DATE_2: | |
| ONE LEVEL ABOUT CONTRACTING OFFICER: | |
| CODE_3: | |
| TELEPHONE NUMBER_3: | |
| DATE_3: | |
| 2022-02-11T13:09:38-0500 | |
| KANE.JOHN.G.1039886223 |
File details come from the government source that posted it. Updated .