Job Plans for Elevators (1).pdf
PDF 84 KB Posted
- Attached to
- USCG Base New Orleans Elevator Maintenance Federal contract opportunity
- Solicitation number
- 70Z02925QNEWO0000004
About this file
This document is a set of job plans related to the maintenance and inspection of elevators located at the United States Coast Guard (USCG) Base in New Orleans, Louisiana. The job plans outline detailed maintenance tasks and schedules for hydraulic and electric elevators, including inspecting and cleaning various elevator components, lubricating rails and mechanisms, and completing maintenance checklists.
The document also includes details for the federal contract opportunity to provide annual inspection and preventative maintenance services for two elevators and associated equipment at the USCG Base in New Orleans. The contract is a Firm Fixed Price Service with a base year from December 15, 2024 to December 14, 2025, and four option years. The service is set aside for small businesses, and the NAICS code is 561210. Quotes must be submitted by email to the Point of Contact, and the award will be based on Lowest Price Technically Acceptable, with Lowest Price weighted at 50%, Past Performance at 20%, and Technical Acceptability at 30%.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FAR Supplies Services Clauses .doc | DOC document | |
| SF-18.pdf | ||
| Wage Rates.txt | TXT text file | |
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
10/15/2024 14:20:05 1 / 18
Job Plan Details 1646: D1015-110-1950-A-Elevator, Hydraulic, Passenger/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Type: MAINTENANCE Supervisor: Labor Group:
Duration: 01:51 Crew:
10/15/2024 14:20:05 2 / 18
1646: D1015-110-1950-A-Elevator, Hydraulic, Passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car, checking for any unusual noise or operation. 00:03
20 In car: A) inspect and clean fixture and signal in operating panel and car position and direction indicator.
00:06
22 B) check operation of emergency lights and bell. 00:01
24 C) check handrails, ceiling panels and hang on panels for tightness. 00:02
26 D) check for tripping hazards. 00:01
30 Inspect and lubricate rails of hoistway. 00:06
40 Hallway corridor: A) inspect hall buttons, signal lamps, lanterns and hall position indicator.
00:03
42 B) inspect starter station, key operation and lamps. 00:04
50 Motor room: A) inspect machine room equipment. 00:05
52 B) lockout and log record. 00:01
54 C) inspect tank oil level. 00:01
55 D) inspect and adjust controller contacts; main operating contactors and switches.
00:12
56 E) inspect pump and valve unit for leaks. 00:03
57 F) inspect and adjust contoller overloads; set timers. 00:03
58 G) tighten connections and clean controller fuses and holders. 00:01
59 H) inspect and lubricate pump motor bearings. 00:06
60 Hatch: A) check hoistway car rails, brackets and fish plates. 00:06
61 B) inspect/lubricate overhead hatch switches and cams. 00:04
62 C) inspect/clean/lubricate hatch doors locks, rollers, tracks, upthrusts, relating cables, racks, sight guards and closers, motors, gear boxes, limit and zone switches.
00:06
63 D) inspect door gibs and fastening. 00:01
64 E ) inspect/clean/lubricate cab top guides, steading devices, safety switches, indicators, leveling devices, selector tape, switches, hitches and fan motor.
00:04
65 F) check traveling cables for wear. 00:04
66 G) inspect/clean/lubricate door operator roller tracks, upthrusts, related cables, clutch, retiring cam and door gib.
00:05
67 H) inspect door operator; clean and lubricate chain and belt tension. 00:03
68 I) inspect door, clean and adjust safety edge, light ray and cables. 00:06
69 J) clean and adjust proximity devices on door. 00:04
70 Inspect pit gland packing. 00:01
10/15/2024 14:20:05 3 / 18
1646: D1015-110-1950-A-Elevator, Hydraulic, Passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
80 Inspect/clean/lubricate under car guides, selector tape, traveling cable, switches and platen plate assembly.
00:04
90 Clean equipment and surrounding area. 00:04
100 Fill out maintenance checklist. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 01:51 45.00 83.25
Total Planned Labor: 83.25
10/15/2024 14:20:05 4 / 18
1760: D1015-110-1950-Q-Elevator, Hydraulic, passenger/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Type: MAINTENANCE Supervisor: Labor Group:
Duration: 01:07 Crew:
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car, checking for any unusual noise or operation. 00:03
20 In car: A) inspect and clean fixture and signal in operating panel and car position and direction indicator.
00:06
22 B) check operation of emergency lights and bell. 00:01
24 C) check handrails, ceiling panels and hang on panels for tightness. 00:02
26 D) check for tripping hazards. 00:01
30 Inspect and lubricate rails of hoistway. 00:06
40 Hallway corridor: A) inspect hall buttons, signal lamps, lanterns and hall position indicator.
00:03
42 B) inspect starter station, key operation and lamps. 00:04
50 Motor room: A) inspect machine room equipment. 00:05
52 B) lockout and log record. 00:01
54 C) inspect tank oil level. 00:01
55 D) inspect and adjust controller contacts; main operating contactors and switches.
00:12
56 E) inspect pump and valve unit for leaks. 00:03
67 H) inspect door operator; clean and lubricate chain and belt tension. 00:03
68 I) inspect door, clean and adjust safety edge, light ray and cables. 00:06
69 J) clean and adjust proximity devices on door. 00:04
70 Inspect pit gland packing. 00:01
80 Inspect/clean/lubricate under car guides, selector tape, traveling cable, switches and platen plate assembly.
00:04
90 Clean equipment and surrounding area. 00:04
100 Fill out maintenance checklist. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 01:07 45.00 50.25
Total Planned Labor: 50.25
10/15/2024 14:20:05 5 / 18
1768: D1015-110-1950-M-Elevator, Hydraulic, passenger/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Type: MAINTENANCE Supervisor: Labor Group:
Duration: 00:38 Crew:
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car, checking for any unusual noise or operation. 00:03
20 In car: A) inspect and clean fixture and signal in operating panel and car position and direction indicator.
00:06
22 B) check operation of emergency lights and bell. 00:01
24 C) check handrails, ceiling panels and hang on panels for tightness. 00:02
26 D) check for tripping hazards. 00:01
30 Inspect and lubricate rails of hoistway. 00:06
40 Hallway corridor: A) inspect hall buttons, signal lamps, lanterns and hall position indicator.
00:03
42 B) inspect starter station, key operation and lamps. 00:04
50 Motor room: A) inspect machine room equipment. 00:05
52 B) lockout and log record. 00:01
54 C) inspect tank oil level. 00:01
90 Clean equipment and surrounding area. 00:04
100 Fill out maintenance checklist. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 00:38 45.00 28.50
Total Planned Labor: 28.50
10/15/2024 14:20:05 6 / 18
1792: D1015-100-1950-A-Elevator,cable,electric, passenger/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Duration: 08:04 Crew:
10/15/2024 14:20:05 7 / 18
1792: D1015-100-1950-A-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car , check for any unusual noise or operation 00:25
12 Inspect machine room equipment 00:17
14 Motor Room-A-Visually inspect controllers and starters. 00:01
16 Visually inspect selector. 00:01
18 lubricate and adjust tension of selector. 00:07
20 Inspect sleeve bearings of hoist motor. 00:01
22 Inspect brushes and commutator of hoist motor 00:01
24 Inspect sleeve bearings of motor generator. 00:01
26 Inspect brushes and commutator of motor generator. 00:01
28 Inspect sleeve bearings of exciter. 00:00
30 Inspect brushes and commutator of exciter. 00:01
32 Inspect sleeve bearings of regulator dampening motors and tach generators.
00:03
34 Inspect brushes and commutator of regulator dampening motors and tach generators.
00:03
36 Inspect and grease sleeve bearings of geared machines. 00:03
38 Inspect oil level in worm and gear of geared machines. 00:03
40 Visually inspect the brakes. 00:01
42 Inspect and grease, if necessary, sleeve bearings of drive deflectors and secondary sheaves.
00:11
44 Visually inspect and adjust contacts of controllers and starters. 00:20
46 Inspect and adjust main operating contactor and switches of controllers and starters.
00:20
48 Inspect selector, adjusting contacts, brushes and cams if needed. 00:06
50 Inspect selsyn and advancer, motor brushes and commutators of selector.
00:01
52 Clean hoist motor brush rigging and commutator. 00:04
54 Clean motor generator and tighten brush rigging and clean commutator.
00:04
56 Clean exciter brush rigging and commutator. 00:04
58 Clean brush rigging and commutator of regulator dampening motors and tach generators.
00:06
60 Inspect machine worm and gear thrust and bachlash and spider bolts; replace oil.
00:03
62 Clean and lubricate brakes, pins and linkage. 00:06
10/15/2024 14:20:05 8 / 18
1792: D1015-100-1950-A-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
64 Inspect governors; lubricate sleeve bearings. 00:06
66 Inspect controllers and starters; adjust setting of averloads. 00:10
68 Tighten connections on controllers and starters; clean fuses and holders.
00:10
70 Set controllers and starter timers. 00:10
72 Clean controllers and starters. 00:10
74 Clean and inspect selector components. 00:04
76 Inspect group operation controllers; clean and lubricater contacts, timers, steppers of operation controllerl
00:06
78 Change oil and/or grease roller bearings of the hoist motor. 00:06
80 Vaccum and blowout the hoist motor. 00:06
82 Tighten all connections on the hoist motor. 00:01
84 Change oil and/or grease generator's roller bearings. 00:04
86 Vacuum and blowout motor generator. 00:06
88 Inspect all connections on the motor generator and tighten if necessary.
00:04
90 Inspect roller bearings of the exciter and change oil and/or grease. 00:04
92 Vacuum and blowout exciter. 00:06
94 Change oil and/or grease roller bearings of regulator dampening motors and tach generators.
00:06
96 Vacuum/blowout regulator dampening motors and tach generators. 00:03
98 Inspect all regulator dampening motors and tach generator connections.
00:03
100 Change oil and/or grease roller bearings of the geared machines. 00:06
102 Clean and lubricate brake cores. 00:06
104 Inspect drive deflectors and secondary sheaves; change oil and grease roller bearings if necessary.
00:10
106 Inspect drive deflectors and secondary sheaves' cable grooves for cracks.
00:01
108 Inspect governors; change oil and grease roller bearings, if necessary.
00:06
10/15/2024 14:20:05 9 / 18
1792: D1015-100-1950-A-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
110 HATCH-Lubricate rails of hoistway. 00:44
112 Inspect car top and grease sleeve bearings if needed. 00:09
114 Inspect counterweight and grease sleeve bearings if needed. 00:04
116 Visually inspect cables, chains, hoist, compensating governor for wear and equalization.
00:03
118 Lubricate cables, chain hoist and compensationg governor if necessary.
00:11
120 Inspect door operator; clean and lubricate chain and belt tension. 00:11
122 Inspect door, clean and adjust safety edge, light ray and cables. 00:03
124 Clean and adjust proximity devices on door. 00:06
126 Inspect and lubricate governor tape and compensation sheave in pit. 00:04
128 Clean and lubricate compensating tie down in pit. 00:03
130 Inspect pit's run-by on counter weight. 00:09
132 Inspect governor and compensating sheaves or chains for clearance to pit floor.
00:01
134 Inspect/lubricate overhead hatch switches and cams. 00:06
136 Clean and lubricate rollers, cables, sight guards, chains, motors, closures, limit and zone switches.
00:04
138 Inspect door gibs and fastening. 00:01
140 Inspect car top; change oil and grease roller bearings, if necessary. 00:03
142 Check safety switches, indicators, leveling devices, selector tape, switches and hatches.
00:03
144 Check and lubricate fan motor. 00:04
146 Inspect counterweight; change oil and grease roller bearings, if necessary.
00:06
148 Check safety linkage safety and cwt guides. 00:06
150 Inspect compensation hatch. 00:03
152 Inspect chains, hoist and compensation governor. 00:06
154 Inspect traveling cables for tracking and wear. 00:04
156 Inspect door operator commutator and brushes. 00:01
158 Inspect/clean/lubricate door operator clutch, retiring cam, door gib, rollers, tracks, upthrusts and relation cables.
00:06
160 UNDER CAR-Inspect/clean/lubricate safety devices, linkages, car guides, selector tape, switches and hitches.
00:01
162 Inspect cable hitch and loops; load weighing devices. 00:02
10/15/2024 14:20:05 10 / 18
1792: D1015-100-1950-A-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
164 Inspect/lubricate pit hatch switches, cams and pit oil buffer. 00:05
166 IN CAR- Inspect and clean fixtures and signal in operationg panel and car posttion and direction indicator.
00:06
168 Check operation of emergency lights and bells. 00:14
170 Check handrails, ceiling panels and hang on panels for tightness. 00:02
172 Check for tripping hazards. 00:03
174 HALLWAY CORRIDOR-Inspect hall buttons, signal lamps, lanterns and hall position indicator.
00:03
176 Inspect starter station, key operation and lamps. 00:04
178 Clean equipment and surrounding area. 00:04
180 Fill out maintenance checklist and report deficiencies. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 08:04 45.00 363.00
Total Planned Labor: 363.00
10/15/2024 14:20:05 11 / 18
1829: D1015-100-1950-Q-Elevator,cable,electric, passenger/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Duration: 05:01 Crew:
10/15/2024 14:20:05 12 / 18
1829: D1015-100-1950-Q-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car , check for any unusual noise or operation 00:25
12 Inspect machine room equipment 00:17
14 Motor Room-A-Visually inspect controllers and starters. 00:01
16 Visually inspect selector. 00:01
18 lubricate and adjust tension of selector. 00:07
20 Inspect sleeve bearings of hoist motor. 00:01
22 Inspect brushes and commutator of hoist motor 00:01
24 Inspect sleeve bearings of motor generator. 00:01
26 Inspect brushes and commutator of motor generator. 00:01
28 Inspect sleeve bearings of exciter. 00:00
30 Inspect brushes and commutator of exciter. 00:01
32 Inspect sleeve bearings of regulator dampening motors and tach generators.
00:03
34 Inspect brushes and commutator of regulator dampening motors and tach generators.
00:03
36 Inspect and grease sleeve bearings of geared machines. 00:03
38 Inspect oil level in worm and gear of geared machines. 00:03
40 Visually inspect the brakes. 00:01
42 Inspect and grease, if necessary, sleeve bearings of drive deflectors and secondary sheaves.
00:11
44 Visually inspect and adjust contacts of controllers and starters. 00:20
46 Inspect and adjust main operating contactor and switches of controllers and starters.
00:20
48 Inspect selector, adjusting contacts, brushes and cams if needed. 00:06
50 Inspect selsyn and advancer, motor brushes and commutators of selector.
00:01
52 Clean hoist motor brush rigging and commutator. 00:04
54 Clean motor generator and tighten brush rigging and clean commutator.
00:04
56 Clean exciter brush rigging and commutator. 00:04
58 Clean brush rigging and commutator of regulator dampening motors and tach generators.
00:06
60 Inspect machine worm and gear thrust and bachlash and spider bolts; replace oil.
62 Clean and lubricate brakes, pins and linkage. 00:06
10/15/2024 14:20:05 13 / 18
1829: D1015-100-1950-Q-Elevator,cable,electric, passenger/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
64 Inspect governors; lubricate sleeve bearings. 00:06
110 HATCH-Lubricate rails of hoistway. 00:44
112 Inspect car top and grease sleeve bearings if needed. 00:09
114 Inspect counterweight and grease sleeve bearings if needed. 00:04
116 Visually inspect cables, chains, hoist, compensating governor for wear and equalization.
00:03
118 Lubricate cables, chain hoist and compensationg governor if necessary.
00:11
120 Inspect door operator; clean and lubricate chain and belt tension. 00:11
122 Inspect door, clean and adjust safety edge, light ray and cables. 00:03
124 Clean and adjust proximity devices on door. 00:06
126 Inspect and lubricate governor tape and compensation sheave in pit. 00:04
128 Clean and lubricate compensating tie down in pit. 00:03
130 Inspect pit's run-by on counter weight. 00:09
132 Inspect governor and compensating sheaves or chains for clearance to pit floor.
00:01
166 IN CAR- Inspect and clean fixtures and signal in operationg panel and car posttion and direction indicator.
00:06
168 Check operation of emergency lights and bells. 00:14
170 Check handrails, ceiling panels and hang on panels for tightness. 00:02
172 Check for tripping hazards. 00:03
174 HALLWAY CORRIDOR-Inspect hall buttons, signal lamps, lanterns and hall position indicator.
00:03
176 Inspect starter station, key operation and lamps. 00:04
178 Clean equipment and surrounding area. 00:04
180 Fill out maintenance checklist and report deficiencies. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 05:01 45.00 225.75
Total Planned Labor: 225.75
10/15/2024 14:20:05 14 / 18
1836: D1015-100-1950-M-Elevator,cable,electric, passengr/freight
Organization: USCG Priority: 0 Owner:
Site: SAM Interruptible?: N Group Owner:
Duration: 03:04 Crew:
10/15/2024 14:20:05 15 / 18
1836: D1015-100-1950-M-Elevator,cable,electric, passengr/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 Ride car , check for any unusual noise or operation 00:25
12 Inspect machine room equipment 00:17
14 MOTOR ROOM-Visually inspect controllers and starters. 00:01
16 Visually inspect selector. 00:01
18 lubricate and adjust tension of selector. 00:07
20 Inspect sleeve bearings of hoist motor. 00:01
22 Inspect brushes and commutator of hoist motor 00:01
24 Inspect sleeve bearings of motor generator. 00:01
26 Inspect brushes and commutator of motor generator. 00:01
28 Inspect sleeve bearings of exciter. 00:00
30 Inspect brushes and commutator of exciter. 00:01
32 Inspect sleeve bearings of regulator dampening motors and tach generators.
00:03
34 Inspect brushes and commutator of regulator dampening motors and tach generators.
00:03
36 Inspect and grease sleeve bearings of geared machines. 00:03
38 Inspect oil level in worm and gear of geared machines. 00:03
40 Visually inspect the brakes. 00:01
42 Inspect and grease, if necessary, sleeve bearings of drive deflectors and secondary sheaves.
00:11
110 HATCH-Lubricate rails of hoistway. 00:44
112 Inspect car top and grease sleeve bearings if needed. 00:09
114 Inspect counterweight and grease sleeve bearings if needed. 00:04
116 Visually inspect cables, chains, hoist, compensating governor for wear and equalization.
00:03
118 Lubricate cables, chain hoist and compensationg governor if necessary.
00:11
166 IN CAR- Inspect and clean fixtures and signal in operationg panel and car posttion and direction indicator.
00:06
168 Check operation of emergency lights and bells. 00:14
170 Check handrails, ceiling panels and hang on panels for tightness. 00:02
172 Check for tripping hazards. 00:03
174 HALLWAY CORRIDOR-Inspect hall buttons, signal lamps, lanterns and hall position indicator.
10/15/2024 14:20:05 16 / 18
1836: D1015-100-1950-M-Elevator,cable,electric, passengr/freight
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
176 Inspect starter station, key operation and lamps. 00:04
178 Clean equipment and surrounding area. 00:04
180 Fill out maintenance checklist and report deficiencies. 00:01
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 1 03:04 45.00 138.00
Total Planned Labor: 138.00
10/15/2024 14:20:05 17 / 18
5171: D1010 ELEVATOR INSPECTION
Organization: USCG Priority: 3 Owner:
Site: SAM Interruptible?: N Group Owner:
Type: MAINTENANCE Supervisor: Labor Group:
Duration: 08:00 Crew:
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 NOTE: THIS MAINTENANCE IS TO BE PREFORMED BY QUALIFIED,
CERTIFIED CONTRACTOR.
00:00
20 NOTIFY APPROPRIATE PERSONNEL THAT ANNUAL MAINTENANCE
INSPECTION IS BEING PERFORMED.
00:00
30 REVIEW AND ADHERE TO APPLICABLE SAFETY PRECAUTIONS,
POLICIES, AND APPROVED PROCEDURES.
00:00
40 SEE COAST GUARD APPROVED MAINTENANCE CONTRACT FOR
DETAILS.
00:00
50 MAINTENANCE IS IN ACCORDANCE WITH LOCAL AND STATE CODES. 00:00
60 NOTIFY APPROPRIATE PERSONNEL THAT ANNUAL MAINTENANCE
INSPECTION IS COMPLETED.
00:00
70 RECORD EQUIPMENT DISCREPANCIES OR UNACCEPTABLE
CONDITIONS ON WORK ORDER.
00:00
80 RECORD MATERIALS USED ON WORK ORDER. 00:00
90 COMPLETED BY
_________________________________________________ DATE
08:00
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
EXT CONT 0 00:00 0.00 0.00
Total Planned Labor: 0.00
10/15/2024 14:20:05 18 / 18
5433: Elevator Certification - A
Organization: USCG Priority: 3 Owner:
Site: SAM Interruptible?: N Group Owner:
Type: MAINTENANCE Supervisor: Labor Group:
Duration: 08:00 Crew:
Job Plan Tasks Task ID Description Duration Nested Job Plan Meter Name Owner Owner Group
10 NOTE: THIS MAINTENANCE IS TO BE PERFORMED BY QUALIFIED,
CERTIFIED CONTRACTOR.
00:00
20 NOTIFY APPROPRIATE PERSONNEL THAT ANNUAL MAINTENANCE
INSPECTION IS BEING PERFORMED.
00:00
30 REVIEW AND ADHERE TO APPLICABLE SAFETY PRECAUTIONS,
POLICIES, AND APPROVED PROCEDURES.
00:00
40 SEE COAST GUARD APPROVED MAINTENANCE CONTRACT FOR
DETAILS.
00:00
50 MAINTENANCE IS IN ACCORDANCE WITH LOCAL AND STATE CODES. 00:00
60 NOTIFY APPROPRIATE PERSONNEL THAT ANNUAL MAINTENANCE
INSPECTION IS COMPLETED.
00:00
70 RECORD EQUIPMENT DISCREPANCIES OR UNACCEPTABLE
CONDITIONS ON WORK ORDER.
00:00
80 RECORD MATERIALS USED ON WORK ORDER. 00:00
90 COMPLETED BY
_________________________________________________ DATE
08:00
Labor Task ID Craft Skill Level Vendor Contract Labor Qty Hours Rate Line Cost
1822 DFLT 0 08:00 45.00 0.00
Total Planned Labor: 0.00
File details come from the government source that posted it. Updated .