J5 Product Data Sheets.pdf

PDF 42 MB Posted Jul 8, 2021

Attached to: Huron-Manistee National Forest - Huron Shores Lobby Renovation
Solicitation number: 12445521Q0104
Issued by: Department of Agriculture Forest Service

View the file

Other files

File	Type	Posted
12445521Q0104 (RFQ).docx	DOCX document	Jul 8, 2021
J3 Drawings.pdf	PDF	Jul 8, 2021
J6 Map.pdf	PDF	Jul 8, 2021
12445521Q0104 (SF-18).pdf	PDF	Jul 8, 2021
J4 Reception Area Existing Condition Plan.pdf	PDF	Jul 8, 2021
J2 Specifications.pdf	PDF	Jul 8, 2021
J1 Wage Determination.pdf	PDF	Jul 8, 2021

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PRODUCT DATA SHEET

Thermafiber

SAFB™ FF

Formaldehyde-Free Mineral Wool Insulation

FORMALDEHYDE

FREE

Description Thermafiber® SAFB™ (Sound Attenuation Fire Blankets) Formaldehyde-Free mineral wool insulation is a solution for architects, specifiers and contractors interested in achieving green building standards and using products that exclude red list1 materials like formaldehyde. Thermafiber® SAFB™ FF batts provide excellent acoustical control and fire protection in interior walls and floor/ceiling fire-rated assemblies and are non-combustible, moisture-resistant, non-corrosive, non-deteriorating, and mold-resistant4. The new formaldehyde-free Thermafiber® light density products are especially appropriate for applications in education, healthcare, and other institutions committed to indoor air quality.

SAFB™ FF can be installed in both steel and wood framed construction.

1. Reference Cradle to Cradle Innovation Institution banned list and Living Building Challenge red list.

Standards, Codes Compliance

NFPA 101 Class A rated interior finish

ASTM C 665 Type I, per Federal Specification HH-I-521F

ASTM E 136 Non-combustible as defined per NFPA Standard 220

ASTM C 1104 Absorbs less than 1% by volume

ASTM E 84 Flame Spread 0, Smoke Developed 0

ASTM C 1338 Complies

UL Formaldehyde-Free Validated

GreenGuard Gold certified

SAFB products are approved by: New York City Board of Standards & Appeals - (under BSA 35-66-SM, 173-77-M, 249-74-SM, 34-66-SM, & accepted by MEA 207-82-M, Vol.2)

Product Options Recycled Content Options2,3:

EPA Choice Fiber (US Government Buildings) ............................Minimum 75% Standard Fiber .....................................................................70%

2. Recycled content options other than standard must be specified at time of order.

Acoustical Performance Coefficients at Frequencies Per ASTM C 423

2.5 pcf SAFB™

Density

Thickness 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz NRC

2" 0.34 0.61 1.07 1.09 1.07 1.10 0.95

3" 0.51 0.99 1.18 1.03 0.99 0.96 1.05

4" 0.83 1.19 1.27 1.12 1.12 1.13 1.20

6" 1.37 1.32 1.23 1.16 1.12 1.12 1.20

Installation

• Interior Stud Cavity – Friction fit SAFB™ securely between studs.

Butt ends of blankets closely together and fill all voids.

• Creased SAFB™ – Using SAFB™ 1" wider than regular blankets, bow the blankets slightly to fit into stud cavity. Slit the blankets vertically 1" deep with a utility knife down the center.

• Floor-Ceiling – Friction fit SAFB™ securely between floor joints.

• Ceiling Overlayment – Lay SAFB™ over ceiling panels extending 48" beyond all partitions. Tightly fit around all hangers, obstructions, and penetrations.

Availability Density Thickness* Widths** Lengths

2.5 pcf 1½" - 7" 15", 16", 17", 23", 24", 25" 48"

4.0 pcf 1" 15", 16", 17", 23", 24", 25" 48"

Tolerances +¼" - 1/8" ±1/8" ±1/2"

*Thicknesses are available in 1/2" increments.

** 15" and 23" are recommended widths for wood framed construction.

Thermafiber Insolutions®

Thermafiber Insolutions® offers industry leading technical and engineering assistance to architects, specifiers, and contractors.

These services include CAD drawings, engineering judgments, LEED® Credit Information, and product recommendations. Contact our technical services department at 1-888-834-2371 or email ThermafiberInsolutions@owenscorning.com.

Features

• Formaldehyde-Free

• Exceptional sound and noise absorption

• Adds STC value to wall and floor-ceiling assemblies

• Provides fire containment in rated assemblies

• Fire resistant to temperatures above 2,000º F (1,093º C)

• Conserves energy, reduces greenhouse gas emissions

• Mold-resistant4

• Contributes to credits in several green building programs such as LEED® and Green Globes®

4. ASTM C 1338

Environmental and Sustainability Owens Corning is a worldwide leader in building material systems, insulation and composite solutions, delivering a broad range of high quality products and services.

Owens Corning is committed to driving sustainability by delivering solutions, transforming markets and enhancing lives. More information can be found at www.owenscorning.com.

Notes For additional information refer to the Safe Use Instruction Sheet (SUIS) found in the SDS Database via http://sds.owenscorning.com.

Submittal Approvals Job Name Contractor Date

Disclaimer of Liability Thermafiber, Inc. shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use.

Thermafiber, Inc. liability is expressly limited to replacement of defective goods.

Any claim shall be deemed waived unless made in writing within thirty (30) days from date it was or reasonably should have been discovered.

LEED® is a registered trademark of the U.S. Green Building Council.

Green Globes® is a registered trademark of Green Building Initiative, Inc.

UL and the UL logo are trademarks of UL LLC.

Pub. No. 10022322-B. Printed in U.S.A. January 2018.

THERMAFIBER, INC.

ONE OWENS CORNING PARKWAY

TOLEDO, OHIO, USA 43659

888-TFIBER1 [834-2371]

www.thermafiber.com

Thermafiber® SAFB™ FF is especially appropriate for applications with stringent requirements around indoor air quality including schools and health care facilities.

Certifications and Sustainable Features

• 3 Verified by ICC-ES to contain a minimum of 70% recycled content.

See ICC-ES Evaluation Report VAR-1025 at icc-es.org.

• GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg.

• UL Environment validated Formaldehyde-Free. For more information, visit ul.com/ecv.

• Gold Material Health Certificate from Cradle to Cradle Products Innovation Institute.

• Thermafiber® SAFB™ FF mineral wool insulation is participating in Declare, and is Living Building Challenge compliant. For more information, visit living-future.org/declare.

• This product receives SAFETY Act designation by the U.S. department of Homeland Security. For more information visit safetyact.gov.

• 86% biobased content for unfaced product and 64% biobased content for faced product, certified by USDA BioPreferred® program.

bguerrera Rectangle

The term pattern sidings describes a variety of siding products in which the board has been machined on the edge(s) and face(s) to produce siding with interlocking or overlapping joints and with smooth surfaced or rough sawn faces.These sidings fall into two broad groups: tongue and groove and lap.

TONGUE & GROOVE

Western Red Cedar tongue and groove is widely used for its good looks and versatility. It can be installed horizontally, vertically or diagonally, each method giving a distinctly different look.Tongue and groove siding is available with rough or smooth faces. Both seasoned (kiln-dried) and unseasoned (green) sidings are available.

The joints between adjoining pieces are usually v-shaped but flush jointed, reveal and radius joints are also available.The different joints and surface textures in tongue and groove siding combine to provide a range of shadow line effects that enhance the product’s versatility.

Tongue and groove siding is manufactured in clear grades suitable for a more formal, elegant appearance, particularly when pieces are smooth faced. Knotty grades are in demand for their smart, casual look.

PATTERN SIDINGS

Clear 4 in. tongue and groove cedar siding with light brown semi-transparent stain.

bguerrera Highlight bguerrera Highlight

Highlight

SIZES OF WESTERN RED CEDAR TONGUE

AND GROOVE SIDING

Finished

Nominal Green Dry

Thickness l 3/4 11/16 (in.)

Widths 4,6,8 3-9/16, 5-1/2, 3-3/8, 5-3/8 (in.) 7-3/8 7-1/8

Specification Information Sample Required Specification

Species:

Western Red Cedar WRCLA Western

Red Cedar

Product Pattern and Intended Use:

Siding is used as an exterior Tongue and Groove cladding to provide both EV1S - WRCLA1 weather protection and architectural style.The designer may choose from Edge V one side (EV1S) WRCLA1, Edge V two sides (EV2S),WRCLA2, or specific pattern number.

Size:

Specify the nominal size of 1 x 4 in.

the product.

Grade:

The grade of the product B Clear governs its overall quality.

Refer to WRCLA specification literature or grading agency rule books for available grades.

Grading Agency Paragraph:

To ensure that the product NLGA para. 204a meets a written standard, an agency grade paragraph should be referenced.

Moisture Content:

Specify whether the product Kiln-dried is to be green (unseasoned) or kiln-dried.

Surface to be exposed:

Specify the application Smooth on face side orientation to assist the supplier in shipping the right product for the job.

Quantity:

Express in board feet Example:

5500 board feetthe quantity required.

See table opposite for factor to convert square feet of wall area to board feet.

SPECIFYING CEDAR TONGUE AND

GROOVE SIDING

The following information is required when specifying tongue and groove siding products:

V-grooved on two sides (EV2S) WRCLA2

V-grooved on one side (EV1S) WRCLA1

Center matched tongue and groove

Other tongue and groove siding patterns

WP-6

Pattern numbers from the Western Wood Products Association publication Standard Patterns

Nominal Dressed Exposed Linear Board Width Width Face Width Feet Feet

(inches) (inches) (inches) Factor Factor

4 3-3/8 3 4.00 1.33

6 5-3/8 5 2.40 1.20

8 7-1/8 6-3/4 1.77 1.19

See Bevel Siding section for guide to using coverage table.

TONGUE AND GROOVE SIDING

COVERAGE TABLE

FOR GREEN (UNSEASONED) SIDING

bguerrera Rectangle bguerrera Rectangle bguerrera Rectangle

CLEAR GRADES OF WESTERN RED CEDAR PATTERN SIDINGS

Grade Description Grading Rule Paragraph1

Clear Heart

The highest grade. Includes NLGA 200a only pieces with heartwood on WCLIB 102-b the exposed face. Many pieces completely clear, others have minor imperfections that do not detract from their fine appearance.

A Clear*

Permits somewhat more NLGA 200b imperfections than Clear Heart WCLIB 102-c but the grade is still restricted to pieces with excellent appearance.

*Common specifications are A and Better and A and Better with a percentage of B grade allowed.

B Clear

Permits slightly larger and more NLGA 200c numerous characteristics than WCLIB 102-d A grade and occasional pieces may require trimming to yield high grade pieces in shorter lengths.

Most often supplied as a percentage with A grade.

KNOTTY GRADES OF WESTERN RED CEDAR PATTERN SIDINGS

Grade Description Grading Rule Paragraph1

Select Knotty

Available kiln-dried NLGA 204a or unseasoned. WCLIB 111-e Knots are sound and tight.

Quality Knotty

In this grade, natural growth NLGA 204b characteristics are not limited WCLIB 111-f as stringently as in Select Knotty. Cross cutting may be required on some pieces to yield tight knotted siding.

Proprietary Grades*

Designed to meet appearance NLGA N/A requirements for cedar sidings WCLIB N/A and trim. Ask your WRCLA distributor for details

*Manufacturers may market their own proprietary grades.

WRCLA MEMBERS

For technical information visit our websites:

www.wrcla.org www.cedar-siding.com

For more information about Western Red Cedar please ask the experts at:

Western Office:

PMB #1705,

914 - 164th Street SE #B-12, Mill Creek,WA 98012-6339 Tel: (425) 316-8845 Fax: (425) 316-3979 E-mail: mackie@wrcla.org

Eastern Office:

P.O. Box 952, Riverhead, NY 11901-0702 Tel: (631) 643-9725 Fax: (631) 643-7252 Toll free: 1-800-266-1910 E-mail: burke@wrcla.org

Administration Office:

1501 - 700 West Pender Street, Pender Place 1, Business Building, Vancouver, British Columbia, Canada V6C 1G8 Tel: (604) 684-0266 Fax: (604) 687-4930 Toll free: 1-866-778-9096 E-mail: info@wrcla.org

The Western Red Cedar Lumber Association (WRCLA) does not warrant the accuracy of the information herein.

The WRCLA, its directors,officers,employees, servants and agents shall not be responsible or liable for any cause of action, loss, damage, injury or death in any way connected with the information herein even though such cause of action, loss, damage, injury or death arises from the negli-gence or default of the WRCLA, its directors, officers, employees, servants or agents.

CAMCO, Inc.

Cedar Valley, Inc.

City Lumber Sales & Service Ltd.

Columbia Cedar, Inc.

Delta Cedar Products Ltd.

Downie Timber/Selkirk Specialty

Fred Tebb and Sons, Inc.

Haida Forest Products Ltd.

Interfor

Lazy S Lumber Inc.

LP Engineered Wood Products Ltd.

Lyle Forest Products

Mr. Spindle, Inc.

North Enderby Timber Ltd.

Northwest Forest Products

Oregon Canadian Forest Products Inc.

Pacific Lumber Remanufacturing

Pacific Western Wood Works

Pope & Talbot, Inc.

Premier Forest Products Inc.

Formerly J.& J. Forest Products

Sawarne Lumber Company Ltd.

Skana Forest Products Ltd.

Teal Cedar Products Salmon Arm Division

TRI-PRO™ Cedar Products

Twin Rivers Cedar Products Ltd.

Tyee Timber Products Ltd.

Welco USA/Skookum Lumber Weyerhaeuser Company

T he Western Red Cedar Lumber Association (WRCLA) is a non-profit trade association representing quality producers of Western Red Cedar lumber products in

British Columbia, Canada and the US Pacific Northwest states. Association members are dedicated to producing quality sidings, decking, paneling, outdoor and other specialty cedar products in a wide range of sizes and grades. The WRCLA is committed to providing the construction industry with information about WRCLA member products, their specification, and proper use.

93-491 Revised October 2003

Distributed by:

Wilsonart Wilsonart® Laminate

1110-420

Certificate Number

01/31/2006 - 04/09/2022

Certificate Period

Certified

Status

UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings

CERTIFICATE

OF COMPLIANCE

Commercial furniture and furnishings are tested in accordance with ANSI/BIFMA M7.1-2011(R2016) and determined to comply with ANSI/BIFMA X7.1-2011(R2016) and ANSI/BIFMA e3-2014e Credit 7.6.1, 7.6.2, and 7.6.3 in a Private Office Environment. Products also determined compliant in accordance with California Department of Public Health (CDPH) Standard Method V1.2-2017 in the office environment.

Product tested in accordance with UL 2821 test method to show compliance to emission limits on UL 2818. Section 7.1 and 7.2.

UL investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL and the Certificate Holder (collectively “Agreement”). The Certificate Holder is authorized to use the UL Mark for the identified Product(s) manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with the Agreement.

GREENGUARD Gold Certification Criteria for Building Products and Interior Finishes

Criteria CAS Number Maximum Allowable

Predicted Concentration Units

TVOC (A) - 0.22 mg/m³

Formaldehyde 50-00-0 9 (7.3 ppb) µg/m³

Total Aldehydes (B) - 0.043 ppm

4-Phenylcyclohexene 4994-16-5 6.5 µg/m³

Particle Matter less than 10 µm (C) - 20 µg/m³

1-Methyl-2-pyrrolidinone (D) 872-50-4 160 µg/m³

Individual VOCs (E) -

1/2 CREL

or 1/100th TLV

(A) Defined to be the total response of measured VOCs falling within the C6 – C16 range, with responses calibrated to a toluene surrogate. Maximum allowable predicted TVOC concentrations for GREENGUARD Gold (0.22 mg/m³) fall in the range of 0.5 mg/m³ or less, as specified in CDPH Standard Method v1.2.

(B) The sum of all measured normal aldehydes from formaldehyde through nonanal, plus benzaldehyde, individually calibrated to a compound specific standard. Heptanal through nonanal are measured via TD/GC/MS analysis and the remaining aldehydes are measured using HPLC/UV analysis.

(C) Particle emission requirement only applicable to HVAC Duct Products with exposed surface area in air streams (a forced air test with specific test method) and for wood finishing (sanding) systems.

(D) Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation of 3,200 μg/day and an inhalation rate of 20 m³/day

(E) Allowable levels for chemicals not listed are derived from the lower of 1/2 the California Office of Environmental Health Hazard Assessment (OEHHA) Chronic Reference Exposure Level (CREL) as required per the CDPH/EHLB/Standard Method v1.2 and BIFMA level credit 7.6.2 and 1/100th of the Threshold Limit Value (TLV) industrial work place standard (Reference: American Conference of Government Industrial Hygienists, 6500 Glenway, Building D-7, and Cincinnati, OH 45211-4438).

Hinge Identification Guide

Hinges

▀▀ Arm ▀▀ Link ▀▀ Cup

Link

Cup

NOTE: All hinges shown are straight-arm hinges. The same characteristics apply to cranked hinge arms – with the exception of the shape/size of arm and different reference numbers.

Arm

CLIP Hinge – 3 Main Components

1 CLIP 100°

1 Stepped arm

2 Straight link

3 Large opening in cup

4 Exposed link rivet

Part no.

71M25X0

CLIP 107°

1 Straight arm

2 Tapered link

3 Small closed cup

4 Covered link rivet

Part no.

75M15X0

CLIP 100° – CLIP 107°

CLIP 107°

1 Smooth surface

2 Sliding depth adjustment screw

3 Two rivets

Part no.

75M15X0

CLIP top 107°

1 Ribbed surface

2 "Spiral-tech" cam depth adjustment screw

3 Three rivets

Part no.

75T15X03

CLIP 107° – CLIP top 107°

1 Smooth surface

2 Sliding depth adjustment screw

3 Two rivets

1 Ribbed surface

2 "Spiral-tech" cam depth adjustment screw

3 Three rivets

CLIP top 120°

1 Cam side adjustment screw

2 Slight rib on link

3 No opening in cup

Part no.

71T55X0

CLIP top 107°

Part no.

75T15X0

1 Standard side adjustment screw

2 Tapered link

3 Small opening in cup

CLIP top 107° – CLIP top 120°

CLIP top 95° Thick Door

Part no.

71T95X0

1 Stepped arm

2 Raised line on arm

3 Exposed link rivet

CLIP top 107°

Part no.

75T15X0

1 Straight arm

2 Tapered link

3 Small opening in cup

CLIP top 107° – CLIP top 95° Thick Door

1 Stepped arm

2 Raised line on arm

3 Exposed link rivet

1 Straight arm

2 Tapered link

3 Small opening in cup

CLIP top 120°+

1 Indented arm

2 logo

Part no.

73T55X0

CLIP top 120°

Part no.

71T55X0

1 Straight arm

2 logo

CLIP top 120° – CLIP top 120°+

CLIP top 110°+

1 Indented arm

Part no.

73T35X0

1 CLIP top 110°

1 Straight arm

Part no.

71T35X0

CLIP top 110° – CLIP top 110°+

1 Indented arm

1 Straight arm

CLIP top BLUMOTION 110°+

1 Indented arm

Part no.

73B35X0

CLIP top BLUMOTION 110°

1 Straight arm

Part no.

71B35X0

CLIP top BLUMOTION 110° – CLIP top BLUMOTION 110°+CLIP top BLUMOTION 110° – CLIP top BLUMOTION 110°+

CLIP top BLUMOTION 155° – CLIP top BLUMOTION 125°

CLIP top BLUMOTION 155°

Part no.

71B75X0

1 Rectangle cutout in arm

2 Narrow hinge link

3 BLUMOTION deactivation switch

4 Full exposed rivet

CLIP top BLUMOTION 125°

Part no.

71B75X0D

1 Rectangle cutout in arm

2 Wide hinge link

3 BLUMOTION deactivation switch

4 Partial exposed rivet

HingesCLIP top 155° – CLIP top 170°

CLIP top 155°

1 Rectangle cutout in arm

2 Narrow hinge link

3 No BLUMOTION deactivation switch

Part no.

71T75X0

CLIP top 170°

1 T-cutout in arm

2 Adjustment screw recessed

3 Rear link inside

4 Round hole

Part no.

71T65X0

1 Rectangle cutout in arm

2 Narrow hinge link

3 BLUMOTION deactivation switch

4 Full exposed rivet

1 Rectangle cutout in arm

2 Wide hinge link

3 BLUMOTION deactivation switch

4 Partial exposed rivet

Screw-on

1 No screws

2 No dowels

Part no.

71B3550

Press-in

1 Dowel screws

2 8 mm dowels

Part no.

71B3580

Attachments

1 No screws

2 No dowels

1 Dowel screws

2 8 mm dowels

EXPANDO

Part no.

71B358E

1 EXPANDO screws

2 EXPANDO dowels

INSERTA

1 Die cast cover

2 8 mm INSERTA dowels

Part no.

71B3590

Style

B = CLIP top BLUMOTION T = CLIP top

M = CLIP

Series

7 = CLIP top BLUMOTION, CLIP top, CLIP

CLIP top BLUMOTION, CLIP top and CLIP

7 1 B 3 5 8 0

Opening Angle

3 = 110°, 110°+ 7 = 155°, 125° 9 = 95°, angled and special application

Attachment Features

0 = Standard A = Aluminum

E = EXPANDO

Arm Design

4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application

Attachment

0 = Aluminum 5 = Screw-on 8 = Press-in

9 = INSERTA

Closing

Odd = All CLIP top BLUMOTION hinges are self close only, no free swing 1 = 110°, 95°, 155°, 125° 3 = 110°+ 9 = Angled, special application

Series

7 = CLIP top

BLUMOTION

Style

B = CLIP top

BLUMOTION

CLIP top BLUMOTION

7 1 B 3 5 8 0 X

Special Features

D = 125°

Arm Design

4 = Angled 5 = Straight-arm 6 = Half-crank 7 = Full-crank 9 = Special application

Opening Angle

0 = Mini 1 = 107° 3 = 110° 4 = Glass 5 = 120° 6 = 170° 7 = 155° 8 = Bi-fold 9 = 95°

Attachment Features

0 = Standard A = Aluminum

E = EXPANDO

Attachment

0 = Screw-on for special application 3 = Bi-fold press-in

4 = 170° INSERTA

5 = Screw-on 8 = Press-in

9 = INSERTA

Closing

Even = Free swing Odd = Self close 0 or 1 = 110°, 120°, 170°, 95°, 155°, Mini 2 or 3 = 110°+, 120°+, Aluminum 4 or 5 = 107°, Glass 9 = Angled, special application

Series

7 = CLIP top

Style

T = CLIP top A = Angled CLIP top

CLIP top

7 1 T 3 5 8 0 X

Special Features

BTL

B37

.TL

.10

= BLUMOTION

compatible = Angled

BLUMOTION

compatible

= BLUMOTION

compatible Free swing = Inset blind corner = 125° = Free swing = Blind corner

Arm Design

5 = Straight-arm 6 = Half-crank 7 = Full-crank

Closing

Even = Free swing Odd = Self close 0 or 1 = 100° 5 = 107°

Opening Angle

1 = 107° 2 = 100°

Attachment

5 = Screw-on 8 = Press-in

9 = INSERTA

Series

7 = CLIP

Style

M = Hole for center adjustment and cover cap

Attachment Features

0 = Standard

E = EXPANDO

CLIP

7 1 M 2 5 8 0

= BLUMOTION

compatible = Angled

BLUMOTION

compatible

= BLUMOTION

compatible Free swing = Inset blind corner = 125° = Free swing = Blind corner

Style

E = EXPANDO

H = Two-piece L = One-piece

Attachment Features

0 = Standard Z = Twin

Material

3 or 4 = Steel 5 or 7 = Zinc die-cast

Attachment

3 or 5 = In-line 6 or 7 = Wood screws 8 = Pre-mounted system screws 9 = System screws or #7 wood screws

Height

0 = 0 mm 3 = 3 mm 4 = 4.5 mm 6 = 6 mm 9 = 9 mm

Attachment Location

0 = Frame 9.5 mm setback 1 = Panel 37 mm setback 6 = Frame 12.5 mm setback

Special Features

E = EXPANDO

I = INSERTA

. = Comment

Series

7 = CLIP

CLIP Mounting Plates

1 7 5 L 6 6 0 0 . X X .21 .22 .24

Face Frame/ Special Applications

04 = 1/4" 06 = 3/8" 08 = 1/2" 10 = 5/8" 12 = 3/4" 14 = 7/8" 16 = 1" 18 = 1-1/8"

CLIP

Wing

▀▀ Cup ▀▀ Arm ▀▀ Mounting plate

Mounting plate

Cup

Arm

NOTE: All COMPACT hinges have the overlay stamped on the mounting plate

Cup depth

COMPACT Hinge – 3 Main Components

COMPACT BLUMOTION 38C – 107°

1 7/16" cup depth

2 Indented arm

Part no.

38C35XB.XX

COMPACT BLUMOTION 39C – 110°

1 1/2" cup depth

2 Smooth arm

Part no.

39C35XB.XX

COMPACT BLUMOTION 39C – COMPACT BLUMOTION 38C

COMPACT BLUMOTION 38C – 107°

COMPACT BLUMOTION 39C – 110°

COMPACT BLUMOTION 38N – COMPACT BLUMOTION 38B

1 Dimple in arm

2 Partial overlay plate (1 screw installation)

Part no.

38N35XB.XX

COMPACT BLUMOTION 38N – 105°

COMPACT BLUMOTION 38B – 107°

1 Indented arm

2 Face mount plate (2 screw installation)

Part no.

38B35XBF22

1 2

COMPACT 39C – 110°

1 1/2" cup depth

2 39C stamped on base of cup

Part no.

39C35XC.XX

COMPACT 38C – 107°

1 7/16" cup depth

2 38C stamped on base of cup

Part no.

38C35XC.XX

COMPACT 39C – COMPACT 38C

HingesCOMPACT 38N – COMPACT 38.

COMPACT 38. – 105°

1 No side adjustment screw

2 No cam depth adjustment screw

Part no.

38.3580.08

COMPACT 38N – 105°

1 Side adjustment screw

2 Cam depth adjustment screw

Part no.

38N35XC.XX

Hinges

Screw-on

1 No screws

2 No dowels

Part no.

38N355B.08

Press-in

1 Dowel screws

2 8 mm dowels

Part no.

38N358B.08

HingesCOMPACT BLUMOTION and COMPACT

Overlay & Adjustments

. = Partial – height only B = Full – height & side C = Full – height, side & depth N = Partial – height, side & depth

Series

3 = COMPACT BLUMOTION and COMPACT

3 9 C 3 5 8 B . 2 0

COMPACT BLUMOTION and COMPACT

Attachment/Features

0 = Standard

B = COMPACT BLUMOTION

C = COMPACT

CUP Material

5 = Steel

Attachment

5 = Screw-on 8 = Press-in

Cup Depth

8 = 11 mm (7/16") 9 = 13 mm (1/2")

Series

3 = COMPACT BLUMOTION

and COMPACT

3 9 C 3 5 8 B . X X

Overlay & Adjustments

. = Partial – height only B = Full – height & side C = Full – height, side & depth N = Partial – height, side & depth

Overlays

05 = 5/16" 06 = 3/8" 08 = 1/2" 10 = 5/8" 12 = 3/4" 16 = 1" 20 = 1-1/4" 21 = 1-5/16" 22 = 1-3/8" 24 = 1-1/2" 25 = 1-9/16"

Plate Mount

. = Wrap around E = Edge F = Face

HingesNotes

Notes

HingesNotes

Blum, Inc.

7733 Old Plank Rd.

Stanley, NC 28164 800-438-6788 blum.com

H N

7.1

I de nt . 2

B lu m , I nc

P le as e vi si t b lu m .c om fo r i nf or m at io n on o th er B lu m p ro du ct s

A H inges & pivots

Pulls & plates

C Flush bolts & coordinators D

Latches, catches & bolts

EStops F

Exterior hardw are

G M iscellaneous hardw are

Ives Architectural hardware products B47

Protection plates

8400 Commercial protection plates 8402 UL Commercial protection plates � Door protection plates are available in .050" thick brass, stainless steel or aluminum; and 1/8" thick high impact polyethylene in clear or black.

� All plates, metal and plastic, come standard with four beveled edges and countersunk mounting holes (B-CS).

� Protection plates must be ordered in 1/2" increments. Available in other sizes, consult customer service � For 8402 UL Plates, UL mark appears in upper right corner. Not available on plastic protection plates.

Certifications � Meets ANSI A156.6 for J301 � UL protection plates certified to UL10C

Mounting � Standard mounting package, 16 per pack

− #6 X 5/8 oval head screws � Optional TEK/TORX package, specify TK-TX

− #6 X 5/8 Self-drilling, Self-tapping screws − #6 X 5/8 Torx screws

Finishes � Aluminum 5005 Series, Brass C26800 Series, Stainless Steel 300

Series, Plastic

BHMA Description Substrate Finish Max sizes

605 Bright Brass Brass US3 24"X48"

606 Satin Brass Brass US4 24"X48"

612 Satin Bronze Brass US10 24"X48"

613 Oil rubbed Bronze Brass US10B 36"X48"

619 Satin Nickel Brass US15 24"X48"

625 Bright Chrome Brass US26 36"X48"

626 Satin Chrome Brass US26D 24"X48"

628 Satin Aluminium Aluminium US28 48"X48"

629 Bright Stainless Steel Stainless Steel US32 48"X48"

630 Satin Stainless Steel Stainless Steel US32D 48"X48"

654 Satin Stainless Steel Stainless Steel US32D 48"X48"

BLK Matte black Stainless Steel BLK 24"X48"

P-BLK Black Plastic P-BLK 48"X48"

CLR Clear Plastic CLR 48"X48"

� Custom finishes are available as engineering special, consult customer service.

Available options � Specify B-NH for no mounting holes. (Not available on 8402. Available only with US32D, US32, US3, US4, US28, Clear, Black only) � Specify B-NHA for no mounting holes with adhesive.

� Specify ERS prepped with extra row of screws.

� Special Cut-outs are available as engineering special, consult customer service.

Available accessory � Gasket tape kit tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation.

One tape pack will cover an the perimeters of a 8" x 34" kickplate. Order 8401 gasket tape.

Number of screw packs required by plate size (specify TEK Screws or TORK screws)

22”-25” 26”-33” 34”-41” 42”-48”

4”-8” 1 1 1 1

9”-16” 1 1 1 1

17”-24” 1 1 1 2

25”-32” 1 1 2 2

33”-40” 1 2 2 2

41”-48” 2 2 2 2 bguerrera Highlight bguerrera Highlight bguerrera Highlight

Shaker 9

SHAKER 9

SOLID MAPLE

https://www.kraftmaid.com/search.php https://www.kraftmaid.com/

LID

PPO

1-800-562-5267 (U.S.A. Only) www.sugatsune.com

LID

PPO

1-800-562-5267 (U.S.A. Only) www.sugatsune.com

84.3

D oo r Th ic kn es s

50Door side

Single knuckle hinge (sold with kit)

Side board

182.7182.7

45.445.4

183183

9.8 2020 130130

.511

2 × �5.6 �11 Depth 3.5

4 × 5.6 × 9.6 Oval Depth 3.5

95° 95°

Door Thickness A 30 251 50 226

Stopper Rail

(F ro m d oo r b ac k si de

2×5.6×9.6 Oval

Body Unit

6xø5.6

117117

84.3

D oo r Th ic kn es s

50Door side

Single knuckle hinge (sold with kit)

Side board

182.7182.7

45.445.4

183183

9.8 2020 130130

.511

2 × �5.6 �11 Depth 3.5

4 × 5.6 × 9.6 Oval Depth 3.5

95° 95°

Door Thickness A 30 251 50 226

Stopper Rail

(F ro m d oo r b ac k si de

2×5.6×9.6 Oval

Body Unit

6xø5.6

117117

5.0

10.0

15.0

20.0

25.0

30.0

400 500 600 700 800

LADH-50

LADH-35

Door height (mm)

D oo r w ei gh t ( kg

95º

OPENING 24"

LADH-35

25.8 lbs

LADH-50

36.9 lbs

30"

LADH-35

20.7 lbs

LADH-50

29.5 lbs

36"

LADH-35

17.2 lbs

LADH-50

24.6 lbs

Item No. Max. Torque per piece (lbs·in) Panel Thickness Wt (g) Box (pcs) Material Finish

LADH-35 221 ~ 309 30~50 mm (1-3/16"~2") 2,000 1 Steel (SPCC)/

Polyacetal (POM)/ABS

Arm: Nickel Chrome Body: Dark Brown

Other Parts: Nickel PlatingLADH-50 309 ~442

Item No. Weight (g) Material Finish

LSN15-38-600C 300 Stainless Steel Polished

4×R3

1.5 ø3 .5

N×ø7 ø9.4 (countersunk)

560 (22-1/16")

22 38

600 (23-5/8")

STAINLESS STEEL PIANO HINGE for LADH LSN-C

Stops flap at 95° opening.

With stopper Can be retro-fitted to existing counters without processing.

Installation position can be easily determined with supplied mounting templates.

Easy post-installation

Damper works just before flap closes, preventing it from slamming shut and pinching fingers.

Soft-close

Soft-close even at slight angle

Lift-assist mechanism with light opening.

Lift-assist Door can be opened lightly

• Add a smooth soft-close to counter tops in restaurants, bars and reception desks to prevent slamming.

• Lift-Assist feature helps users lift countertop

• Holds door open at 95 degrees.

• Easy installation - surface mounted and can be retrofitted

• Stainless steel piano hinge included (see next page for details)

• Recommended use with LADH Lift Assist Damper

• Please note this product is designed for use on wood. Hole positioning on wood should be done by aligning the actual hinge. This product is not suitable for sheet metal or installations with hole pitch limitations.

• Included as part of the LADH Heavy Duty Lift Assist Damper set.

• Hinge can be cut down to shorter desired length.

LIFT A

SSIST D

A M

PER

S (W

/A N

LE STO

PPER

LIFT-ASSIST DAMPER (Heavy Duty) LIFT-ASSIST DAMPER (Heavy Duty)LADH LADH

2.5mmClear_015PVB_2.5mmClear | Air 1/4" (6.4mm) | 2.5mmClear_015PVB_2.5mmClear

5/8 " 0 81 61 12 15 15 0.54 0.55 0.81 0.70 1.16 Low

Specifications Insulating Unit Construction

2.5mmClear_015PVB_2.5mmClear | Air 1/4" (6.4mm) | 2.5mmClear_015PVB_2.5mmClear Outdoor Lite: Laminate-2.5mmClear_015PVB_2.5mmClear Indoor Lite: Laminate-2.5mmClear_015PVB_2.5mmClear Vitro Approved Manufacturers/Where to Buy Vitro Products: Vitro Glass Fabricator Certification: Vitro lite(s) are Cradle to Cradle certified by McDonough Braungart Design Chemistry, LLC (MBDC )

Note: Be aware that lam inated glazing constructions may have increased optical distortion and/or strain iridescence from stacked multiple individual layers especially when the glass lites are heat treated. In addition transmitted and reflective color differences can occur when a low-e or reflective coating is located adjacent to the interlayer material. A coating facing an airspace in an IG unit may appear a different color than the same coating in a lam inate.

The results represent Center-of-Glass performance data based on ANSI/NFRC 100 and ANSI/NFRC 200 Environmental Design Conditions utilizing the LBNL Window

7.3 software program according to the procedures in ANSI/NFRC 100, ANSI/NFRC 200, and NFRC 300. Performance data is based on representative samples of factory production. Actual values may vary slightly due to variations in the production process. This data is to be used for comparison purposes and should not be considered a contract. For configurations that include diffuse components, performance results cannot be verified and should only be used as a general indication of performance. It is the recipient’s responsibility to ensure the manufacturability of the above glazing configurations as well as evaluating appropriate design considerations such as wind and snow load analysis, thermal stress analysis, and local building code compliance. Vitro makes no warranty or guarantee as to the results obtained by the user and assumes no responsibility for the accuracy of the data from non-Vitro manufacturers utilized in the above simulations. Vitro recommends that a full size mock-up be reviewed under the specific job-site conditions and retain the mock-up as a basis of acceptable product.

Atlantica, Azuria, Graylite, IdeaScapes, Optiblue, Optigray, Pacifica, Solarban, the Solarban logo, Solarblue, Solarbronze, Solarcool, Solargray, Solexia, Starphire, the Starphire logo, Sungate, Vistacool, Vitro, the Vitro logo, and the Vitro Certified network logos are registered trademarks owned by Vitro. Cradle to Cradle is a trademark of MBDC.

Glass colors represented are approximate.

While Vitro has made a good faith effort to verify the re liability of this computer based tool, it may contain unknown programming errors that may result in incorrect results. The user is encouraged to use good judgment and report any questionable results to Vitro for evaluation. The applicability and subsequent results of data simulated by this tool will be compromised if the user fails to input the correct information. Vitro makes no warranty or guarantee as to the results obtained by the user of this tool and assumes no responsibility for the accuracy of the data from non-Vitro manufacturers available for simulations in this program.

Th ick ne ss

(in ch es)

Tra nsm itta nc e U V %

Tra nsm itta nc e V isib le

Tra nsm itta nc e T ota l

Sola r % Ex ter ior

Sola r

Refl ec tan ce

Ex ter ior Visib le

Refl ec tan ce

Int eri or Visib le

Refl ec tan ce

U-Valu e (

Wint er

Nigh ttim

e) (Btu/ hr* ft *°F

U-Valu e(S um mer

Day tim

e) (Btu/ hr* ft *°F

Sha din g C oe ffic ien t

(SC) Sola r H ea t G ain

Coe ffic ien t (S

HGC)

Lig ht

To Sola r G ain

(LS

Th erm al Stre ss Risk

(If an ne ale d g las s) www.mbdc.com

Legal Notices & Privacy Policy

Construct- Vitro Glass Configurator Page 1 of 1 http://construct.vitroglazings.com 04/27/2021 http://www.mbdc.com http://vitro.com/en/terms-and-conditions http://construct.vitroglazings.com bguerrera Highlight bguerrera Highlight bguerrera Highlight bguerrera Highlight

Overview

Cylinder

Mounting

Parallel arm (push side)

Top jamb (push side)Hinge (pull side)

Available cylinder options

DEL Delayed action cylinder

Sizing Adjustable spring size 1-6, includes patented Green Dial

4040XP-3071

Cast iron cylinder assembly

Handing Non-handed

The 4040XP is LCN’s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

4040XP Series Surface mounted closer

CoversFinishes

4040XP-72MC

Metal cover

� Handed � Required for plated finishes and custom powder coat finishes

� Optional

4040XP-72

Plastic cover

� Non-handed � Includes 4040XP-54 snap-on cover clip

Available finish options

MTLPC Brite metallic: Custom powder coat finish, which resembles that of 651 or 652 plated finish.

SRI For installations where a higher level of protection against weather conditions, or the effects of a potentially corrosive atmosphere is required, LCN offers a special rust inhibiting (SRI) process. Ferrous metal components receive an SRI pretreatment and a standard powder coat finish of your choice, or a custom powder coat finish for a nominal additional cost. Closers treated with the SRI process exceed the 100 hour protection level available with standard LCN powder coated finishes.

Bright Brass

Satin Brass

Satin Bronze

Satin Bronze, Blackened

Satin Nickel

Bright Chrome

Satin Chrome

Metal plated finishes

Powder coat finishes

Aluminum

Statuary Bronze

Light Bronze

Black

Dark Bronze

Brass

150+ additional custom colors available using the RAL numbering system

Standard cover

Optional cover bguerrera Rectangle

Arms

4040XP-3077

Regular arm

� Non-handed � Mounts pull side or top jamb with shallow reveal P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting

4040XP-3049L

Long hold-open arm

� Non-handed � Includes LONG HEAD AND

TUBE, 4040XP-3048L for top jamb mount

� Optional

4040XP-3049EDA/62G

Hold-open extra duty arm with 62G

� Handed � Features forged, solid steel main and forearm for potentially abusive installations

� 62G shoe provides additional blade stop clearance. Hold-open function is adjusted at the shoe

� Optional

4040XP-3077ELR

Extra long arm

� Non-handed � Includes EXTRA LONG ROD

AND SHOE, 4040XP-79ELR

for top jamb mount with deep reveal

� Optional

4040XP-3049EDA

Hold-open extra duty arm

� Handed � Parallel arm features forged, solid steel main and forearm for potentially abusive installations

� Hold-open function is adjusted at the shoe

� Optional

4040XP-3049CNS

HCUSH arm

� Non-handed � Hold-open function with templated stop/hold-open points

� Handle controls hold-open function

� Optional

4040XP-3077L

Long arm

� Non-handed � Includes LONG ROD AND

SHOE, 4040XP-79LR for top jamb mount

� Optional

4040XP-3077EDA

Extra duty arm

� Non-handed � Features forged, solid steel main and forearm for potentially abusive installations

� Optional

4040XP-3077CNS

Cush-N-Stop® Arm

� Non-handed � Features solid forged steel main arm and forearm with stop in soffit shoe.

� Optional

4040XP-3049

Hold-open arm

� Non-handed � Mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe

� 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting

� Optional

4040XP-3077EDA/62G

Extra duty arm with 62G

� Non-handed � Features forged, solid steel main and forearm for potentially abusive installations

� 62G shoe provides additional blade stop clearance

� Optional

4040XP-3077SCNS

Spring CUSH arm

� Non-handed � For potentially abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe

� Optional

Arms

4040XP-3049SCNS

Spring HCUSH arm

� Non-handed � For potentially abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe

� Handle controls hold-open function

Installation accessories

4040XP-18

Plate

� Required for hinge side mount where top rail is less than 3 3/4˝ (95 mm)

� Requires minimum 2˝ (51 mm) minimum top rail

4040XP-62PA

PA shoe

� Required for parallel arm mounting

4040XP-18TJ

Plate

� Centers top jamb mounted closer vertically on head frame where face is less than 3 1/2˝ (89 mm). Plate requires 1 3/4˝ (44 mm) minimum head frame

4040XP-61

Blade stop spacer

� Required to lower parallel arm shoe to clear 1/2˝ (13 mm) blade stop

� Optional

4040XP-18G

Plate

� Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition

� Requires 1 3/4˝ (44 mm) minimum head frame

4040XP-30

CUSH shoe support

� Provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3 1/16˝ (78 mm)

� Optional

4040XP-18PA

Plate

� Required for parallel arm mounting where top rail is less than 5 1/2˝ (140 mm), measured from the stop

� Requires 2˝ (51 mm) minimum top rail

4040XP-419

PA flush panel adapter

� Provides horizontal mounting surface for parallel arm shoe on single rabbeted or flush frame

Installation accessories

4040XP-62A

Auxiliary shoe

� Requires a top rail of 7˝ (178 mm)

� Shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop

� Optional

Fasteners Self-reaming and tapping screws included standard

Fastener pack options

TBSRT TB1 with self-reaming and tapping screws

WMS Wood and machine screw

TBWMS TB1, wood and machine screw

TORX TORX machine screw

TBTRX TB1 and TORX machine screw

1 Specify door thickness if other than 1 3/4"

4040XP-54

Snap-on cover clip

� Used to secure 4040XP-72 plastic cover to cylinder body

Dimensions and mounting

Hinge (pull) side mounting

2-1/4" 57 mm

11" 279 mm

1-1/16" 27 mm

3/4" 19 mm2-11/16"

68 mm 10-7/16" 625 mm

5/8" 16 mm

12-1/4" 311 mm

3-1/2" 89 mm

3-3/4" 95 mm

4040XP-18

Top jamb (push side) mounting

2-1/4" 57 mm

11" 279 mm

1-3/16" 30 mm

3/4" 19 mm

2-11/16" 68 mm

12-1/4" 311 mm

11/16" 17 mm

10-3/8" 264 mm

3-1/2" 89 mm

3-3/4" 95 mm

4040XP-18G4040XP-18TJ

Dimensions and mounting

6" 152 mm

4" 102 mm

14-1/16" 357 mm

3-1/2" 89 mm

12-1/4" 311 mm

4040XP-18PA

2-1/4" 57 mm

5-1/4" 133 mm

4" 102 mm

5-1/2" 140 mm

14-1/16" 357 mm

3-1/2" 89 mm

12-1/4" 311 mm

4040XP-18PA

2-1/4" 57 mm

6" 152 mm

5-1/4" 133 mm

CUSH mount

EDA mount

Parallel arm (push side) mounting

2-1/4" 57 mm

4" 102 mm

5-7/8" 149 mm

5-3/8" 137 mm

12-1/4" 311 mm

3-1/2" 89 mm

4-15/16" 125 mm

5-3/8" 137 mm

4040XP-18PA

14-1/2" 368 mm

Specifications www.allegion.com/us

Accessibility Available with less than 5.0 lbs. opening force on 36" door

Certifications/ approvals

� Grade 1 - ANSI A156.4

� UL 10C

� Meets BAA - Buy American Act

Degree of operation

Hinge (pull) side Max opening: 120° Hold open: 90-120°

Top jamb (push side) mount Max opening: 120° Hold open: 85-120°

Parallel arm with 62PA Max opening: 180° Hold open: 180°

EDA

Max opening: 180° Hold open: 180°

Cush and spring cush Max opening: 110° Hold open: 110°

Environmental conditions

� Approved for interior use � Approved for exterior use (SRI coated only) � LCN’s standard all weather fluid performs to temperature ranges from 120°F (49°C) to -30°F (-35°C)

� LCN’s powder coat finish surpasses 100 hours of salt spray which is over four times the ANSI standard for corrosion resistance.

Warranty 30 years

Standard features

� Cast iron body � Full complement bearing � 1 1/2" diameter piston � 11/16" diameter double heat treated pinion journal

LID

PPO

1-800-562-5267 (U.S.A. Only) www.sugatsune.com

LID

PPO

1-800-562-5267 (U.S.A. Only) www.sugatsune.com

84.3

D oo r Th ic kn es s

50Door side

Single knuckle hinge (sold with kit)

Side board

182.7182.7

45.445.4

183183

9.8 2020 130130

.511

2 × �5.6 �11 Depth 3.5

4 × 5.6 × 9.6 Oval Depth 3.5

95° 95°

Door Thickness A 30 251 50 226

Stopper Rail

(F ro m d oo r b ac k si de

2×5.6×9.6 Oval

Body Unit

6xø5.6

117117

84.3

D oo r Th ic kn es s

50Door side

Single knuckle hinge (sold with kit)

Side board

182.7182.7

45.445.4

183183

9.8 2020 130130

.511

2 × �5.6 �11 Depth 3.5

4 × 5.6 × 9.6 Oval Depth 3.5

95° 95°

Door Thickness A 30 251 50 226

Stopper Rail

(F ro m d oo r b ac k si de

2×5.6×9.6 Oval

Body Unit

6xø5.6

117117

5.0

10.0

15.0

20.0

25.0

30.0

400 500 600 700 800

LADH-50

LADH-35

Door height (mm)

D oo r w ei gh t ( kg

95º

OPENING 24"

LADH-35

25.8 lbs

LADH-50

36.9 lbs

30"

LADH-35

20.7 lbs

LADH-50

29.5 lbs

36"

LADH-35

17.2 lbs

LADH-50

24.6 lbs

Item No. Max. Torque per piece (lbs·in) Panel Thickness Wt (g) Box (pcs) Material Finish

LADH-35 221 ~ 309 30~50 mm (1-3/16"~2") 2,000 1 Steel (SPCC)/

Polyacetal (POM)/ABS

Arm: Nickel Chrome Body: Dark Brown

Other Parts: Nickel PlatingLADH-50 309 ~442

Item No. Weight (g) Material Finish

LSN15-38-600C 300 Stainless Steel Polished

4×R3

1.5 ø3 .5

N×ø7 ø9.4 (countersunk)

560 (22-1/16")

22 38

600 (23-5/8")

STAINLESS STEEL PIANO HINGE for LADH LSN-C

Stops flap at 95° opening.

With stopper Can be retro-fitted to existing counters without processing.

Installation position can be easily determined with supplied mounting templates.

Easy post-installation

Damper works just before flap closes, preventing it from slamming shut and pinching fingers.

Soft-close

Soft-close even at slight angle

Lift-assist mechanism with light opening.

Lift-assist Door can be opened lightly

• Add a smooth soft-close to counter tops in restaurants, bars and reception desks to prevent slamming.

• Lift-Assist feature helps users lift countertop

• Holds door open at 95 degrees.

• Easy installation - surface mounted and can be retrofitted

• Stainless steel piano hinge included (see next page for details)

• Recommended use with LADH Lift Assist Damper

• Included as part of the LADH Heavy Duty Lift Assist Damper set.

• Hinge can be cut down to shorter desired length.

LIFT A

SSIST D

A M

PER

S (W

/A N

LE STO

PPER

LIFT-ASSIST DAMPER (Heavy Duty) LIFT-ASSIST DAMPER (Heavy Duty)LADH LADH

87 ™ Series Standard & 186 ™/187 ™ Series Bracket System

Applications Anochrome (ANO), Galvanized Steel (GALV) and White (WH) finished products are perfect for super-duty storage and display applications for retail stores, grocery stores, warehouses, industrial, repair garages, maintenance storage, business office storage, and residential storage.

304-grade stainless steel (Stainless Steel (SS)) finished products are created for applications requiring strong corrosion and acid resistance, sanitary/easy-to-clean surfaces, or an improved aesthetic appearance: hospitals, commercial kitchens, food processing facilities, laboratories, pharmaceutical industries and outdoor applications**. For long term use, stainless steel can be the least expensive long-term material option.

Load Rating Varies per size*

Mounting Wall

Material • 12-gauge steel construction: Anochrome and White

• 14-gauge 304-grade stainless steel construction:

Stainless Steel and Galvanized Steel

Finishes Anochrome (ANO), Galvanized Steel (GALV), Stainless Steel (SS), White (WH): Attractive, long-lasting, corrosion resistant finishes RoHS Compliant: Anochrome (ANO), White (WH)

Features Reinforced brackets lock into slotted standards that mount to every type of wall. To ensure the brackets stay in place and the shelving remains stable, every bracket includes an easy-to-operate lock mechanism. Strong, durable, secure weight-bearing support.

Accessories include screws, shelf rests (end, center and front), rubber shelf cushions and steel shelving.

87 and 87 SS Series Standards

•	Dimensions:	7/8"	wide	x	11/16"	deep	x	selected	length
	•	12-gauge	steel	construction:	Anochrome	and	White
	•	14-gauge	304-grade	stainless	steel	construction:	Stainless

Steel and Galvanized Steel

•	Made	in	the	USA
•	Available	from	open	stock

186/187 and 186 SS/187 SS Series Brackets

•	12-gauge	steel	construction:	Anochrome	and	White
•	14-gauge	304-grade	stainless	steel	construction:	Stainless

Steel and Galvanized Steel

• Vertically	adjustable	in	2"	increments
	•	Unique,	single	molded,	nylon,	cam	lock	lever	allows	for	easy

installation while securing bracket to standard

•	187	brackets	include	3	lugs	for	additional	support
•	Made	in	the	USA
•	Available	from	open	stock

*Contact KV Customer Service for more information.

**Not applicable for use when non-ferros materials are required.

Super-Duty

Up	to	1,060	lbs./pair*
Single	Slot	Design
Adjustable	in	2"	Increments

87 ™ Series Standard & 186 ™/187 ™ Series Bracket System

87 Series Standards Standard Pack (5/box. 65 lbs./100 ft. Stainless Steel standards are shipped with protective vinyl wrap.)

Size Anochrome (ANO) White (WH) Stainless Steel (SS)

24" 87	ANO	24 87	WH	24 87	SS	24
36" 87	ANO	36 87	WH	36 87	SS	36
48" 87	ANO	48 87	WH	48 87	SS	48
60" 87	ANO	60 87	WH	60 87	SS	60
72" 87	ANO	72 87	WH	72 87	SS	72
84" 87	ANO	84 87	WH	84
96" 87	ANO	96 87	WH	96

Anochrome

(ANO)

Stainless Steel (SS)White (WH)

Screws and Anchors Standard Pack (100/bag. #10 x 2-3/4" screws.)

White (WH)

87-10 WH 100

87-10

End Shelf Rest (Use with 186 and 187 brackets to anchor shelf to bracket at the end of shelving run.)

Standard Pack (100/box)

Anochrome (ANO) White (WH)

210 ANO 210 WH

Center Shelf Rest (Use with 186 and 187 brackets to anchor shelf to bracket and/or join two shelves.)

Standard Pack (100/box)

Anochrome (ANO) White (WH)

211 ANO 211 WH

Front Shelf Rest (Use with 186 and 187 brackets to anchor shelf to bracket and/or join two shelves.)

Standard Pack (100/box)

Anochrome (ANO) White (WH)

212 ANO 212 WH

Rubber Shelf Cushion (Use with steel shelf rests.)

Standard Pack (100/box)

Rubber (RUB)

129 RUB

Screws & Accessories

Snap-In Center Shelf Support Clip (Use with 186 and 187 brackets to anchor shelf to bracket at the end of shelving run.)

Standard Pack (100/carton)

Zinc (ZC)

213C ZC

bguerrera Highlight bguerrera Highlight bguerrera Highlight

87 ™ Series Standard & 186 ™/187 ™ Series Bracket System

186 Series Brackets

187 Series Brackets

1987 Series Steel Shelving

Anochrome (ANO) Stainless Steel (SS)

Unique…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 8, 2021.