IUID.pdf
PDF 65 KB Posted
- Attached to
- F-16 SST Repair; NSN; 5998-01-555-5340
- Solicitation number
- FA825126R0010
About this file
This is an Item Unique Identification (IUID) Checklist that establishes marking requirements for a Circuit Card Assembly (NSN 5998015555340WF, Version 2) procured under DFARS 252.211.7003. The checklist was initiated by Raymond R. Park from the 416 SCMS/GUEAA organization and applies to CAGE codes 94117 with reference numbers 8354415, 8354415P002, and 8354415P2.
The contractor must comply with IUID marking requirements per MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418 standards. Marking must be applied using ink jet methodology on data labels, with both human-readable and machine-readable 2D matrix formats required. Human-readable markings must include minimum 1/8 inch lettering displaying CAGE code (17V), part number (1P), and serial number (IS), while machine-readable 2D matrix markings must be at least 1/4 inch square using construct 2 specification containing the same three data elements. The IUID matrix must be highly visible and easily accessible, with permanent marking applied in accordance with contractor drawing changes or supplements approved by government engineering. The checklist notes that the USAF is not equipped to read barcode formats, necessitating the human-readable component. A Section II indicates embedded items may apply to this NSN, though no specific embedded item details are populated in the checklist.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA825126R0010_0002.pdf | ||
| FA825126R0010_0002.pdf | ||
| FA825126R0010_0001_1.pdf | ||
| FA825126R0010_0001_2.pdf | ||
| CAVAF Reporting Requirements.docx | DOCX document | |
| Packaging SOW.pdf | ||
| Packaging.pdf | ||
| FA825126R0010 Solicitation.pdf | ||
| Item Description.pdf | ||
| DRILS Guide.pdf | ||
| PWS.pdf | ||
| Transportation.pdf | ||
| CDRLs.pdf | ||
| Wage Determination.pdf | ||
| 807.pdf | ||
| CAVAF Guide.pdf |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
5998015555340WF
VERSION NUMBER
NOUN
CIRCUIT CARD ASSEMB
INITIATOR
Park, Raymond R
ORGANIZATION CODE / OFFICE SYMBOL
416 SCMS / GUEAA
COMMERCIAL PHONE
801-775-4903
DSN PHONE
775-4903
CAGE / REFERENCE NUMBER
94117 / 8354415 94117 / 8354415P002 94117 / 8354415P2
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Ink Jet
DESCRIPTION / LOCATION
5. IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
REMARKS
ATTACHMENT(S)
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
Page 1 of 2IUID Version 2Generated by PRPS using Jasper Reports on 28 Jan 2026
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 5998015555340WF
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 2 of 2IUID Version 2Generated by PRPS using Jasper Reports on 28 Jan 2026
File details come from the government source that posted it. Updated .