IUID_0416.pdf
PDF 65 KB Posted
- Attached to
- F-16 VIPER Memory Loader Verifier (MLV) Interim Adapter (IA) Federal contract opportunity
- Solicitation number
- FA8251-23-R-0015
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA825123R0015_0014.pdf | ||
| FA825123R0015_0013.pdf | ||
| FA825123R0015_0012.pdf | ||
| FA825123R0015_0011.pdf | ||
| FA825123R0015_0010.pdf | ||
| FA825123R0015_0009.pdf | ||
| FA825123R0015_0007.pdf | ||
| FA825123R0015_0008.pdf | ||
| FA825123R0015_0006.pdf | ||
| FA825123R0015_0005.pdf | ||
| FA825123R0015_0004.pdf | ||
| FA825123R0015_0003.pdf | ||
| FA825123R0015_0002.pdf | ||
| FA825123R0015_0001.pdf | ||
| CDRLs.pdf | ||
| PWS.pdf | ||
| SCRM.pdf | ||
| ITMDESC_3863.pdf | ||
| Section_L.pdf | ||
| RQR.pdf | ||
| WageDeterminations.pdf | ||
| RQR(2).pdf | ||
| Transportation.pdf | ||
| ITMDESC_0416.pdf | ||
| FA825123R0015.pdf | ||
| DRILS.pdf | ||
| Packaging.pdf | ||
| IUID_3863.pdf | ||
| CAVAF_Reporting_Rqmts.pdf | ||
| Section_M.pdf | ||
| 20230517_JA V_9 VIPER Redacted.pdf | ||
| SOW.pdf |
Show all 32
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
4920015080416WF
VERSION NUMBER
NOUN
ADAPTER ASSEMBLY,IN
INITIATOR
Gustai, Adrian M
ORGANIZATION CODE / OFFICE SYMBOL
416 SCMS / GUEAA
COMMERCIAL PHONE
801-775-0553
DSN PHONE
775-0553
CAGE / REFERENCE NUMBER
0C0C7 / 8379436P001
9009H / 4920PL1491434
94117 / 8379436P001
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Contractor Determined Location and Method
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
Blanco, Curtis JNAME: 04 JUN 2014DATE:
Concerning Marking type and marking method, even though a method was chosen for each of these (this form required that this be done), you may disregard these instructions if appropriate. Contractor to make this determination, however methods used must be in accordance with instructions below.
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b.. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equiped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible, and if possible / appropriate / applicable shall be near human readable information.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
ATTACHMENT(S)
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
Page 1 of 2IUID Version 2Generated by PRPS using Jasper Reports on 15 May 2023
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 4920015080416WF
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 2 of 2IUID Version 2Generated by PRPS using Jasper Reports on 15 May 2023
File details come from the government source that posted it. Updated .