ITEMIZED LIST.xlsx
XLSX spreadsheet 17 KB Posted
- Attached to
- USS HALSEY (DDG-97) CIS PUMPS AND MOTORS
- Solicitation number
- N5523623Q0028
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF18.pdf | ||
| Q0028-RFC.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| CONTRACT: | PUMPS AND MOTORS CONTINGENCY |
| CONTRACTOR: | |
| D.O. # | |
| SHIP: | USS HALSEY (DDG-97) |
| LOCATION: | NAVY REGION SOUTHWEST |
| JSN | LOCATION | LOT | UNIT PRICE | EXT PRICE | |
| ER09-1849 | 01-338-3-Q, FAN ROOM, VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY | 1 | |||
| ELIN 0001 | |||||
| PROVIDE LABOR, SERVICES, EQUIPMENT, AND MATERIALS TO DISCONNECT AND REMOVE EXISTING VANEAXIAL SUPPLY FAN MOTOR ASSEMBLY, ELECTRICAL COMPONENTS AND INTERFERENCES. RE-INSTALL THE NEW GFM VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY, ELECTRICAL COMPONENTS AND INTERFERENCES IN ACCORDANCE WITH THE CONTRACT (SEE NOTES 1 AND 2) | 1 | $0.00 | $0.00 |
| JSN | LOCATION | LOT | UNIT PRICE | EXT PRICE | |
| ER09-1849 | 01-338-3-Q, FAN ROOM, VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY | 1 | |||
| ELIN 0002 | |||||
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE RIGGING OF NEW GFM FAN MOTOR ASSEMBLY LOCATED IN THE PORT SIDE FWD HELO HANGER TO FAN ROOM, 01-338-3-Q, AND FOR THE RIGGING OF REMOVED VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY TO THE PORT SIDE FWD HELO HANGER IN ACCORDANCE WITH THE CONTRACT | 1 | $0.00 | $0.00 |
| JSN | LOCATION | LOT | UNIT PRICE | EXT PRICE | |
| ER09-1849 | 01-338-3-Q, FAN ROOM, VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY | 1 | |||
| ELIN 0003 | |||||
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE REPAIR AND REPLACEMENT OF NEW AND DISTURBED LAGGING AND INSULATION IN ACCORDANCE WITH THE CONTRACT | 1 | $0.00 | $0.00 |
| JSN | LOCATION | LOT | UNIT PRICE | EXT PRICE | |
| ER09-1849 | 01-338-3-Q, FAN ROOM, VANEAXIAL SUPPLY VENT FAN MOTOR ASSEMBLY | 1 | |||
| ELIN 0004 | |||||
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE PREPARATION AND PAINTING OF THE VANEAXIAL SUPPLY FAN MOTOR ASSEMBLY AND NEW AND DISTURBED SURFACES TO INCLUDE INSULLATION AND LAGGING IN ACCORDANCE WITH THE CONTRACT | 1 | $0.00 | $0.00 |
| OVER AND ABOVE - LABOR AND MATERIALS: It is anticipated that additional work may become necessary during the contract performance. The total cost of the over and above materials and labor hours shall be negotiated and authorized by the Contracting Officer prior to the issuance of a modification to the purchase order. | ESTIMATED AMOUNT | UNIT OF ISSUE | FBLR for ELIN 0005. MATERIAL HANDLING RATE FOR ELIN 0006 | TOTAL | |
| ELIN 0005 | ADDITIONAL WORK - LABOR Estimated Straight Time (ST) Man-hours - 100 HRS |
ST Fully Burdened Labor Hour Rate $________
| NOTE: The offeror’s proposed fully burdened labor rate (FBLR) is a fixed hourly rate that includes all wages, overhead, all other indirect costs, general and administrative expenses, Facilities Capital Cost of Money (FCCOM), and profit. The fully burdened labor rate represents a blended rate including labor transferred between divisions, subsidiaries, or affiliates of the offeror under a common control. | 100 | HR | $0.00 |
| ELIN 0006 | ADDITIONAL WORK - MATERIALS | ||
| Note: For contract changes involving subcontractors, subcontractor quotes will be treated as Other Direct Costs (ODCs) and will be subject to the contract material burden rate. Subcontractor quotes must be competitively acquired and submitted with the contractor’s Change Order Price Analysis (COPA) in response to a purchase order modification issued by the Contracting Officer. At no time will the proposed total to be performed by the prime contractor combined with subcontractor quote, material quote, and applicable burdens be allowed to cost more than it would have, had the prime contractor directly provided all material and labor. | 30,000.00 | DOLLARS, US | 0% |
TOTAL $0.00
| MILESTONE EVENT | DATE |
| 1. Purchase Order Start Date | 17-Nov-22 |
| 2. Vaneaxial Supply Vent Fan Motor Assembly removal, installation and OPTEST | 17-28 Nov 22 |
| 3. Delivery order end. | 28-Nov-22 |
| NOTES: |
| 1. The Contractor shall remove the Existing Vaneaxial Supply Fan Motor Assembly from the Fan room and rig the assembly (offload onto pallet) to the Helo Hanger. |
| 2. Rig and install new GFM Vaneaxial Supply Vent Fan Motor Assembly from the Port Side FWD Helo Hanger into the Fan Room and conduct the Shipboard Operational Test to full system capacity. |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .