ItemDescription.pdf

DEPARTMENT OF THE AIR FORCE

OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)

TINKER AIR FORCE BASE OKLAHOMA

Item Description

Lighting Fixtures

76 MXSG is requesting the purchase of the following Lighting Fixtures(Refer to attached fixture schedule for quantities) (If submitting an equal fixture provide ies lighting files for evaluation):

Type A – Crouse Hinds #EVLL 13L C CX 2 1 UNV1 or equal. Class I Div 1 ceiling mounted LED fixture. QTY: (46 each)

Construction – LED housing assembly of die cast aluminum with epoxy powder coating for corrosion protection and heat dissipation. Shatter resistant explosion proof glass lens assembly.

External surface of copper free anodized aluminum. Shock and vibration resistant with no filaments or glass components that can break or shatter and shall include a stainless steel guard.

Optics – Lumen output of 13,598 lumens minimum. Correlated color temperature of 5000deg Kelvin with a minimum CRI of 70. Rated for a minimum life of 60,000 hrs with no less than 70% lumen degradation for ambient temperatures of ‐25C to +55C.

Electrical – Standard input driver voltage of 100‐277 VAC @ 50/60Hz. Power factor greater than 90% with a minimum efficiency of 90 Lumens/Watt. Maximum input of 149W.

Installation – Designed for surface mounting and shall include mounting modules and all necessary accessories.

Listings – Luminaire shall meet the following Certifications and Standards: NEC Class I Div 1 Grops B,C, D; UL844, UL 1598, &UL1598A; NEMA 4X, IP66 with a T5 temperature rating @ 55C and 65C ambient conditions for Class I Div 1 and T6 temperature rating @ 55C for CI Div 1 environments. Must be successfully tested for 3 axis (8G) vibration testing to withstand extreme vibration prone environments.

Type B – Crouse Hinds #EVLL 7L C CX 2 1 UNV1 or equal. Class I Div 1 ceiling mounted LED fixture. QTY: (24 each)

Construction – LED housing assembly of die cast aluminum with epoxy powder coating for corrosion protection and heat dissipation. Shatter resistant explosion proof glass lens assembly.

External surface of copper free anodized aluminum. Shock and vibration resistant with no filaments or glass components that can break or shatter and shall include a stainless steel guard.

Optics – Lumen output of 8293 minimum. Correlated color temperature of 5000deg Kelvin with a minimum CRI of 70. Rated for a minimum life of 60,000 hrs with no less than 70% lumen degradation for ambient temperatures of ‐25C to +55C.

Electrical – Standard input driver voltage of 100‐277 VAC @ 50/60Hz. Power factor greater than 90% with a minimum efficiency of 90 Lumens/Watt. Maximum input of 85W.

Installation – Designed for surface mounting and shall include mounting modules and all necessary accessories.

Listings – Luminaire shall meet the following Certifications and Standards: NEC Class I Div 1 Grops B,C, D; UL844, UL 1598, &UL1598A; NEMA 4X, IP66 with a T5 temperature rating @ 55C and 65C ambient conditions for Class I Div 1 and T6 temperature rating @ 55C for CI Div 1 environments. Must be successfully tested for 3 axis (8G) vibration testing to withstand extreme vibration prone environments.

Type E – ABB Hazlux #DL005EUNOSTGCB2I4U or equal. Class I Div 2 wall mounted LED fixture.

QTY: (8 each)

Construction – Cast copper‐free aluminum construction with baked epoxy powder coat fininsh and stainless steel exposed hardware.

Optics – Thermal shock resistant globe with Teflon anti‐shatter coating and cast aluminum guard. Lumen outut of 5600 lumens @ 37W. Color temperature of 5000 degrees Kelvin and CRI of 70 minimum.

Electrical – Long‐life LEDs and high efficiency drivers with 0‐10V dimming capability. Multi‐volt driver for use on 120 to 277 volt electrical supply and integral surge protection meeting ANSI C82.77‐5 Cat C compliance.

Installation – Designed for wall stanchion mounting.

Listings – UL Certified. DesignLights Consortium (DLC) Premium qualified.

Type F – ABB Hazlux #DL010EUNOSTGB2I4U with #VR15P dome or equal. Class I Div 2 wall mounted LED fixture.driver. QTY: (12 each)

Construction – Cast copper‐free aluminum construction with baked epoxy powder coat fininsh and stainless steel exposed hardware.

Optics – Thermal shock resistant globe with Teflon anti‐shatter coating and cast aluminum guard and dome reflector. Lumen outut of 1 lumens @ 74W. Color temperature of 5000 degrees Kelvin and CRI of 70 minimmum.

Electrical – Long‐life LEDs and high efficiency drivers with 0‐10V dimming capability. Multi‐volt driver for use on 120 to 277 volt electrical supply and integral surge protection meeting ANSI C82.77‐5 Cat C compliance.

Installation – Designed for wall stanchion mounting.

Listings – UL Certified. DesignLights Consortium (DLC) Premium qualified.

Type H – Crouse Hinds #EVLL 9L C CX 2 1 UNV1 or equal. Class I Div 1 ceiling mounted LED fixture. QTY: (12 each)

Construction – LED housing assembly of die cast aluminum with epoxy powder coating for corrosion protection and heat dissipation. Shatter resistant explosion proof glass lens assembly.

External surface of copper free anodized aluminum. Shock and vibration resistant with no filaments or glass components that can break or shatter and shall include a stainless steel guard.

Optics – Lumen output of 10,313 minimum. Correlated color temperature of 5000deg Kelvin with a minimum CRI of 70. Rated for a minimum life of 60,000 hrs with no less than 70% lumen degradation for ambient temperatures of ‐25C to +55C.

Electrical – Standard input driver voltage of 100‐277 VAC @ 50/60Hz. Power factor greater than 90% with a minimum efficiency of 90 Lumens/Watt. Maximum input of 115W.

Installation – Designed for surface mounting and shall include mounting modules and all necessary accessories.

Listings – Luminaire shall meet the following Certifications and Standards: NEC Class I Div 1 Grops B,C, D; UL844, UL 1598, &UL1598A; NEMA 4X, IP66 with a T5 temperature rating @ 55C and 65C ambient conditions for Class I Div 1 and T6 temperature rating @ 55C for CI Div 1 environments. Must be successfully tested for 3 axis (8G) vibration testing to withstand extreme vibration prone environments.