Item Unique Identification (IUID) Checklist.pdf
PDF 65 KB Posted
- Solicitation number
- SPRWA1-6344
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Item Unique Identification (IUID) Checklist document governed by DFARS 252.211.7003, establishing marking requirements for a specific defense item.
The item requiring IUID marking is a Starter-Generator (NSN 2925004656344GA), version 4, designated as a DC Generator. The requirement was initiated by Steven K. Dennard at AFLCMC/WIUEE (Air Force Life Cycle Management Center/Warner Robins). Marking must be performed in accordance with the latest version of MIL-STD-130. The recommended marking instruction utilizes a data label applied via laser etching, with two acceptable methods: Method 1 involves applying a UID label per drawing 200814078-059A in an area visible when viewing the OEM nameplate without interfering with moving or rotating components, with surface preparation using Isopropyl Alcohol Grade A; the alternate method uses a UID plate per drawing 200814078-059G, formed to the surface and bonded using MAGNOBOND 6398 A/B or equivalent. The nomenclature must be listed as "Generator, DC," and existing markings must not be covered during application. Supporting attachments include the label unique identification document (200814078_98752) and DC Generator specifications (23046-019). The embedded items section contains no additional items requiring marking. This checklist was generated on 29 January 2026 as version 4.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
2925004656344GA
VERSION NUMBER
NOUN
STARTER-GENERATOR,E
INITIATOR
Dennard, Steven K
ORGANIZATION CODE / OFFICE SYMBOL
AFLCMC / WIUEE
COMMERCIAL PHONE
478-222-1568
DSN PHONE
472-1568
CAGE / REFERENCE NUMBER
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Laser Etched
DESCRIPTION / LOCATION
Method 1- IAW Dwg 200814078-059A Label (Attached) A) Unique identification (UID) to be applied per MIL-STD-130.
B) list Nomenclature as "Generator, DC" B) Placement of UID will be in area visible when viewing OEM nameplate. Do not interfere or impede any moving or rotating component when locating UID.
C) Prior to placement clean surface area with Isopropyl Alcohol, Grade A or equivalent. Do not cover any existing markings when applying UID.
Alternate Method - IAW Dwg 200814078-059G Plate (Attached) This method if determined that label will not remain readable or permanent affixed to case.
A) Unique identification (UID) to be applied per MIL-STD-130.
B) list Nomenclature as "Generator, DC" B) Placement of UID will be in area visible when viewing OEM nameplate. Do not interfere or impede any moving or rotating component when locating UID.
C) Prior to placement clean surface area with Isopropyl Alcohol, Grade A or equivalent. Do not cover any existing markings when applying UID.
D) Form plate to surface of case to permanently affix prior to bonding.
E) Bond UID with MAGNOBOND 6398 A/B or Equivalent.
REMARKS
ATTACHMENT(S)
200814078_98752 Label Unique Identification.pdf
23046-019 DC Generator.pdf
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2925004656344GA
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
Page 1 of 2IUID Version 4Generated by PRPS using Jasper Reports on 29 Jan 2026
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
REMARKS
ATTACHMENT(S)
Page 2 of 2IUID Version 4Generated by PRPS using Jasper Reports on 29 Jan 2026
File details come from the government source that posted it. Updated .